Both systems publish keyless GBFS 2.3 feeds on publicbikesystem.net,
the same platform as the existing Austin, Honolulu and Chattanooga
entries (listed in MobilityData's systems.csv).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Resolve the source-pack conflicts with Statens vegvesen (keep both packs).
The Norway pack's 900 default pushed the per-pack defaults to 5,204, past
the 4,500 catalog cap this PR enforces, so raise DEFAULT_CCTV_MAX_SOURCES
to 5,500 and CCTV_MAX_SOURCES_CEILING to 6,000.
Google's Maps Platform terms forbid Street View imagery beside non-Google
maps, so the provider declares requiresMapStack: 'photoreal': off Google
3D its chip is dashed with the reason, lookups and opens skip it, and
leaving Google 3D closes its panorama.
- Ground clicks: only a click on the map itself (scenePick.isSurfacePick:
nothing picked or Google 3D tile content) at street zoom opens Street
View, and the camera stays put; higher up the hint says to zoom in.
scenePick.pickGroundPosition replaces the copy in Directions.
- Viewer: poses go out at once and again when the date and address
arrive, so an open never hangs on that lookup; one lookup per panorama,
seeded by the nearest lookup; a close settles a pending open; failed
lookups are asked again; poses follow position changes, not pano_changed.
- Loader: the gm_authFailure handler is installed once, so a retried load
reports a refusal once.
- Viewer host: a prewarm that lands after another provider took the host
is released; FIT/FILL availability is set on every open.
- Provider: a refusal while switched off reports no error over another
photo; SINCE compares against the end of Google's month; messages name
the referrer and network causes; FLAT says Street View is 360° only.
- The layer row names the key of the providers that are on; the MCP panel
CSP admits Street View's tiles, control images and photos.
- Tests for each, against fakes that now follow Google's event order; the
browser gate restores its state, waits instead of sleeping, aims its
panel clicks and corner drags, and asserts the camera stays put.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Google Street View registers beside Mapillary as provider `google`. It runs
on the Maps JavaScript API with the browser GOOGLE_MAPS_API_KEY, loaded on
first use (mapsLoader.js), and uses Google's own StreetViewPanorama as its
viewer adapter, emitting provider-neutral poses (address and month in the
caption, a link to Google Maps, steps along Google's arrows, FOLLOW on
Google 3D). Its chip starts off because every panorama is billed to the
key; the share option is `g`.
Google offers no coverage layer for other maps, so the provider draws
none: with it on, a click on bare ground at street zoom opens its nearest
Google-collected outdoor panorama (groundClick.js). A key Google refuses
reads KEY REJECTED and fails a pending open at once; a lookup Google never
answers fails after 10 s.
Core: providers may declare `groundClick` and `defaultOn`; poses may carry
`capturedAtPrecision` and `title`; the coverage line keeps every
provider's hint; opening one provider's image releases another's
prewarmed viewer; FIT/FILL hides for viewers without render modes. CSP
script-src admits https://maps.googleapis.com. The browser gate gains two
Street View steps (the keyed one skips as 'no Google key' in CI).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The browser gate is one pass over the remaining flows: rail strip and
expand, coverage with fixtures, the ON/OFF pill, 360° and SINCE filters,
KEY REJECTED, nearest photo with caption, × close, phone fit, keyless
KEY REQUIRED on a second page and no page errors. Panel controls are
pressed through the DOM; pick-point search, line/cone clicks, the
framing-cancel, reload/share and status-route probes, the second
viewport and pointer-settling retries are gone (unit tests cover them).
Tests that pinned constants, copy, CSS or source text, or repeated
another test, are removed or merged. CSS loses an unused variable and
duplicate rules. Docs describe the slimmed feature; unused exports and
the layer's dead setCoverageFilter/refreshCoverage surface are removed.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Closesbilawalsidhu/gods-eye-view#155. The first Italian cameras: the 13
webcams along the A22 from the Brenner Pass to Modena.
The camera list is one keyless request to the Open Data Hub (NOI Techpark)
tourism API, which republishes Autobrennero's own list with coordinates
and kilometre markers. Frames are the operator's stills, refreshed about
once a minute, and only each camera's own WebCamImg/km<N>.jpg is
registered. The catalog fetch refuses redirects and is size-capped.
The road climbs from ~20 m in the Po valley to ~1,370 m at the Brenner
Pass, so ground elevation comes from a per-kilometre table sampled from
the Copernicus GLO-90 DEM instead of one flat prior. Headings use the
id-hash fallback at low confidence. CCTV_A22_ENABLED=0 disables the pack.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Trim the doc text this PR adds (README, CHANGELOG, CURRENT-STATE,
KNOWN-ISSUES, SECURITY, DATA_SOURCES, .env.example, the CI job comment),
drop code comments that restate the code, cut design-note JSDoc to a line
or two, and drop review tags from test names. Comments only; no code
changes.
Also: README key count (seven keys, two metered), CURRENT-STATE's gate
paragraph (CI runs a production build with a dummy token), the stacked
doc above meshBoxInRange and the orphaned inMeshRange line in
coverage.js, and a duplicate ALPR row in DATA_SOURCES that a merge had
brought back.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Send 20 points per request, not 50: above ~20 Kartverket answers the
extra points from contour lines (hoydekurver) or not at all. At 20,
nearly every camera resolves from dtm1, so the null-retry pass is gone.
Eight requests in flight keep a cold lookup ~6 s.
- Cache misses: positions with no height are not asked again for 6 h.
- Transport failures: the first 429, 5xx or network error stops the
lookup with no retries, and no lookup starts until the backoff ends
(Retry-After when sent, else 10 min; bounded to 1 min-1 h).
- Budget the 12 s wait from the start of the loader, catalog fetch
included.
- Record answers only for the points each request asked about.
- Send the CCTV User-Agent; link CC BY 4.0 in the credit.
- Docs: bridge cameras sit at the water surface, below the deck.
- Tests: batching, 8-in-flight cap, request count on failure, the shared
deadline, Retry-After bounds, null TTL, backoff, the -20 m bound and
each water marker on its own.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Cover every Norwegian station-based city-bike system with an open GBFS
feed: Kolumbus Bysykkel (Stavanger) and Farte Bysykkel (Skien/Porsgrunn)
through Entur Mobility, and Bysykkel Lillestrøm through JCDecaux
Cyclocity.
api.entur.io and api.cyclocity.fr join the GBFS allowlist, each kept to
its GBFS path prefix since both hosts front other APIs. Entur serves its
feeds without a .json suffix, so the endpoint checks accept either form,
and requests to Entur carry the ET-Client-Name header it requires.
Attributed under NLOD (Entur) and Licence Ouverte (JCDecaux).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Add Norway's three Urban Sharing city-bike systems to the Bike Share
layer and get_bike_share. The feeds are keyless GBFS on
gbfs.urbansharing.com, which joins the proxy allowlist. The proxy now
sends the Client-Identifier header the operators ask clients to send.
Attributed under NLOD 2.0 in DATA_SOURCES.md and the data credits.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The Vegvesen camera feed is 2D, so every camera shared one flat 150 m
ground prior and mountain-pass cameras could sit hundreds of metres below
the terrain where neither the point-height prior nor the ground snap
resolves. Each camera now gets its terrain height from Kartverket's
keyless point-height API (CC BY 4.0): ~840 of ~845 cameras.
- 50 points per request, six in flight; points a full batch answers null
for are retried once in batches of 10 (the API drops points from large
batches).
- Sea-floor depths (dybdekurver / Havflate) under bridges and quays
count as the water surface, 0 m.
- Heights are cached by position, so the 15-minute refresh only asks
about new or moved cameras. A catalog load waits at most 12 s; a slower
lookup keeps filling the cache for the next refresh.
- CCTV_VEGVESEN_HEIGHTS=0 turns it off; Kartverket is credited beside
Statens vegvesen in the attribution popover.
Follow-up to #929.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Address review feedback on #903: the DATA_SOURCES terms link now points
at the actual terms page instead of a sign-in page, key-creation links
go straight to my.tomtom.com/keys, and the README table row is realigned.
Co-Authored-By: Claude Sonnet 5.5 <[email protected]>
- Lower the Vegvesen default cap to 900, still above the ~850 working
cameras, so the per-pack defaults stay closer to the catalog default.
- Name the flat ground-elevation prior as a known limitation: the feed
is 2D, and mountain-pass cameras can sit below terrain where neither
the point-height prior nor the ground snap resolves.
- README: ~3,900 public cameras.
- Use one HLS figure (~135 working) in CHANGELOG and DATA_SOURCES.
- DATA_SOURCES: list the frame and HLS hosts alongside the catalog host.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Norway's ~850 working road cameras load from one keyless GeoJSON request
to the agency's OGC API view of its DATEX 3.1 CCTV table, so no DATEX
account is needed. Faulty cameras are dropped, every camera sits under a
"Norway" category, and the ~135 that publish HLS play as live video
through the existing in-memory relay with the still as fallback. Frames
and manifests are pinned to each camera's own path on the agency hosts.
CCTV_VEGVESEN_ENABLED=0 disables the pack, CCTV_VEGVESEN_MAX_SOURCES
caps it (nearest the largest cities first) and CCTV_VEGVESEN_VIDEO=0
keeps stills only. Attributed under NLOD 2.0.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Reworks #568 to the shape asked for in review.
Generalized from "AQHI" to a provider-backed Air quality layer, with ECCC's
AQHI as the first registered provider. Readings are carried as
{ provider, scale, value, band } rather than a bare number, because
air-quality indices are not interchangeable: AQHI runs 1-10+ on health risk,
the US AQI runs 0-500 on concentration breakpoints, and Europe's EAQI is a
five-step category. Naming the index a value belongs to is what lets another
network be added without inventing a shared numeric meaning. Coverage is
stated as "Canada only" on the provider, the layer row and the card.
Adds the WEATHER panel readout (readout: true) carrying the band legend and
the worst readings currently in view, with getRowControls/setRowControlsListener
following the wind and cyclone cards. An unresolvable view rectangle degrades
to the worst readings overall rather than to a blank card, and a rectangle
crossing the antimeridian is handled.
update() now takes the earthquakes layer's abort-and-guard shape: it aborts any
in-flight request, passes the signal through to the source, and refuses to
touch the scene when the request was superseded, aborted, or the layer was
disabled while it was outstanding. disable() and destroy() abort too. Tests
cover the late-response, superseded-refresh and disabled-update paths.
Rebased on main: the source is registered in src/sources/reference.js, and the
allocation profile was re-measured against the current worker — median 3,900
B/frame, max 4,114, 85.7 B/candidate, inside the shared 154 ceiling, budgeted
at 5,200 for 26% headroom. The earlier figures no longer held.
Freshness is now judged on the observation time rather than on when the last
response arrived. lastUpdate only says the feed answered; a station that keeps
returning a reading from four hours ago would otherwise be narrated as live by
the HUD and the voice provenance envelope. getStats() reports observedAt and
stale, so layerFeedState() calls the layer stale past two missed hourly
publications, and degraded when a refresh fails over readings that are still
good.
The share-link token is 0, which is what layer-token:next allocates. Taking it
moves the ledger fixtures that had hard-coded 0 as the free digit and 3 as the
one after; those shift to 3 and 4. The pinned equality between the reservation
ledger and LEGACY_LAYER_STATE_TOKENS also had to become "the closed legacy set
plus air-quality", since that set is documented as never growing. Happy to
re-pin this differently if you would rather the fixtures derive the provisional
digits from nextLayerStateToken() so the next layer does not move them again.
The layer and its source are registered as ./layers/air-quality and
./layers/air-quality/source, each with its own boundary group, following the
perimeters pair. check:boundaries requires the package exports and the group
exports to be the same set, so a layer that ships a source needs both.
Traffic roads come from OpenFreeMap vector tiles, or TomTom flow tiles with a
key (Hybrid by default). Military areas use OpenFreeMap polygons with a bundled
worldwide name index; wide views show named points. ALPR reads an hourly
OpenStreetMap extract. Cockpit place context and country, state and US county
outlines use bundled Natural Earth and US Census data. Overpass is used only
when an operator configures their own endpoint.
Also: camera arrivals no longer land below ground, keyless terrain retries on
429, bounded relation geometry for configured Overpass, one shared
OpenStreetMap credit, and separate tile and API transports for embedders.
Co-authored-by: theGaryLarson <[email protected]>
Co-authored-by: Milan Khanal <[email protected]>
The loader and normalizer carried the hardware model, but the /sources
response projection and the browser catalog both whitelist fields and
dropped it, so no client consumer ever saw it. Project model and
manufacturer (manufacturer disambiguates bare model strings like "3950")
at both boundaries, and add a test that drives the real middleware and
browser catalog end to end.
WSDOT's layer metadata defines BW (Bothways) plus the diagonals
NE/SE/SW/NW alongside N/E/S/W. Diagonal cameras were being demoted to the
low-confidence id-hash fallback; map them to 45/135/225/315 degrees and
treat BW (not B) as the no-single-facing code. Add CCTV_WSDOT_ENABLED and
CCTV_WSDOT_MAX_SOURCES to .env.example with the other pack controls.
Address review feedback on #595:
- Reject frame links carrying userinfo (user:pass@) in
normalizeCataloniaImageUrl, so catalog data cannot inject credentials
into the server-side frame request on an allowlisted host.
- Fetch cameres.xml over https (verified: same 200 body, no redirect),
refuse redirects with the unread body released, and read the body
through readResponseTextCapped with a 1 MiB CATALONIA_MAX_CATALOG_BYTES
cap instead of an unbounded resp.text().
- Add regression tests for userinfo links on every allowed host, the
refused redirect, and declared and streamed oversize bodies.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Describe the provider-neutral layer, the PROVIDERS chip row, the shared
filter and its share-link options, and how a new provider registers.
Drop every mention of the removed plain-English query and Anthropic key.
Co-Authored-By: Claude Fable 5.1 <[email protected]>
Upstream took share token '2' for fire perimeters, so Street Level moves to
'3'. mapillary-js joins upstream's optimizeDeps include list instead of
overriding it; catalog and registry tests count the new upstream layers.
Co-Authored-By: Claude Fable 5.1 <[email protected]>
Adds King County DOT Road Services' cameras as a keyless source pack, from
the county's public ArcGIS FeatureServer layer ("King County and WSDOT
Traffic Cameras"). 59 live cameras against the current feed.
- The `outFields` list is explicit on purpose: the layer also carries
asset-administration columns (including staff names) that must never be
fetched.
- Only live, active cameras with frames on the county's own
info.kingcounty.gov image handler are registered; the feed writes http://
and the handler serves HTTPS, so URLs are upgraded and pinned before
registration. WSDOT-owned rows are skipped so a camera never appears twice
when a statewide WSDOT pack is present; the few city-owned cameras the
county hosts (Redmond, Sammamish, Newcastle, Snoqualmie) carry their owner
as the per-camera credit, DriveBC-style.
- The layer publishes no facing: headings use the shared id-hash fallback at
low confidence, correctable with the calibration gizmo.
- Uniquely among the packs, the county publishes each camera's hardware
Manufacturer/Model (Cohu 3950/3965, Bosch AUTODOME IP 5000i, Axis
Q6135-LE, Siqura PD910). The model string is whitespace-collapsed (the
feed carries stray newlines) and carried on the source as `model`, with an
additive passthrough in normalizeSourceItem (same pattern as poseSource)
so identified-hardware consumers can use it. All 59 live cameras carry a
model value.
- Attribution per the KCGIS Center terms, registered in the attribution
popover and documented in DATA_SOURCES.md.
- Defaults: the whole catalog loads (125 cap); CCTV_KINGCOUNTY_MAX_SOURCES
changes the cap, CCTV_KINGCOUNTY_ENABLED=0 turns the pack off.
- Tests: filtering (owner/live/status/host/geometry/bbox), HTTPS upgrade,
model whitespace-collapse and passthrough, partner-city credit, env cap,
upstream-failure fallback, and normalizeSourceItem model semantics.
Adds Washington State's highway cameras as a keyless source pack, from the
Esri JSON layer WSDOT's own Travel Center map consumes
(data.wsdot.wa.gov/travelcenter/Cameras.json, ~1,700 point features).
Closes#624.
- Geometry arrives in EPSG:3857; converted to WGS84 on load and bounded to
a Washington bounding box.
- Only frames on WSDOT's own images.wsdot.wa.gov host are registered — the
catalog also lists ~70 partner cameras (Oregon DOT, City of Seattle,
lodges, airports) whose own terms apply; those are skipped rather than
proxied. 1,630 cameras survive the filters against the live feed.
- CompassDirection letters (N/E/S/W) give a high-confidence heading; the
majority `B` ("both directions") rows carry no single facing and use the
shared id-hash fallback at low confidence, with the usual two pose
personalities.
- The feed body carries Windows-1252 bytes (en-dashes in titles) with no
charset declaration, so it is decoded explicitly before parsing.
- WSDOT's layer metadata marks the feed "low volume": the 15-minute catalog
cache and per-request frame fetches respect that, frames are never stored
or redistributed, and the WSDOT credit is registered in the attribution
popover. A keyed WSDOT Traveler Information API serves the same population
for higher-volume use and is deliberately not required.
- Defaults: 250 cameras nearest Seattle and Spokane; CCTV_WSDOT_MAX_SOURCES
changes the cap, CCTV_WSDOT_ENABLED=0 turns the pack off.
- Tests: Mercator conversion against a real layer feature, official-host and
malformed-row filtering, compass mapping and both pose personalities,
cp1252 decoding, env cap, upstream-failure fallback.
Adds MODIS NRT to Active Fires and a keyless Fire Perimeters layer (NIFC WFIGS) with
InciWeb incident links, served through a capped, cached /api/fire-perimeters proxy.
Co-authored-by: Gustavo Beneduzi <[email protected]>
Co-authored-by: James Cooke <[email protected]>
Adds a Local ADS-B layer fed by your own receivers: a browser WebUSB
RTL-SDR (with FM listening) and local 1090/978 MHz decoder feeds
(LOCAL_RECEIVER_FEEDS, local and private addresses only). Local aircraft
draw in magenta with class, silhouettes, 3D models, trails and a position
sanity filter; the click card names the band and input that heard them.
Builds on Sameh Khamis's SDR prototype and the initial GEV port by
Mazeyar Moeini Feizabadi (#134); the decoder-feed design follows the
notes on #57. Closes#57.
Co-authored-by: Sameh Khamis <[email protected]>
Co-authored-by: Mazeyar Moeini Feizabadi <[email protected]>
Twenty layers now (weather, wind, cyclones and recent imagery landed
upstream); Street Level sits after Recent Imagery in the right rail and the
Cameras group, and the rail CSS names it beside the other panels.
Co-Authored-By: Claude Fable 5.1 <[email protected]>
Keeps PR #595's Catalonia CCTV pack in sync with upstream's DelDOT
CCTV pack (#699) and the wind/weather doc updates from #617. The
sources.js conflict was a false positive from git's line-based diff
interleaving two structurally similar but independent loader
functions (loadCataloniaSourcesFromOpenData / loadDelDOTSourcesFromOpenData);
resolved by keeping both as complete, separate functions.
Full unit suite passes (4743/4743, 1 pre-existing Node-version skip).
Select a box on the world and browse the last 30 days of open satellite imagery over it, keyless: NASA GIBS Harmonized Landsat Sentinel-2 (30 m) and the VIIRS daily overview (250 m), with a day strip, IMAGE / VS BASEMAP / A / B modes with a swipe divider, PNG export and share links. The before/after swipe from the Nepal scene moves into shared modules so both use it.
Co-authored-by: manjunath22466 <[email protected]>
Reflect the weather stack, analyst records and feed provenance, satellite pass predictions and live camera video that landed since the last full pass.
Co-authored-by: Matt Van Horn <[email protected]>
Wind (NOAA GFS and ECMWF IFS: animated particles, colour field, a reading at map centre), observed weather (NOAA MRMS radar, GOES and NESDIS infrared clouds, lightning density) on one shared history timeline, NHC and CPHC cyclone advisories with tracks and cones, and a WEATHER panel in the right rail. On 3D Tiles the observed products render as raised shells with a sharper window around the view.
Co-authored-by: Gustavo Beneduzi <[email protected]>
Co-authored-by: Daniel Slay <[email protected]>
Co-authored-by: Rehaan Delmotra <[email protected]>
Co-authored-by: Cursor Agent <[email protected]>
ulihhhh