Picks up #1308 (Overpass admission), #114 (Sea Marks and Ski Pistes),
#1206 (radio country coverage) and #1435. Resolutions:
- SECURITY.md: main's rewritten cross-site paragraph, with voice place
search listed beside /api/overpass among the keyless map routes.
- scripts/format-scope.json: both sides. A merge on main dropped 97 entries
(being restored there); keeping them, this PR's 12 and main's 2 new ones
keeps every file in format:check. All 1,222 paths exist.
- Translation catalogs: main's two new keys and this PR's 47, no overlap.
- Layer count 36 (33 + OSM Places + Sea Marks + Ski Pistes); both schema
pins re-derived, the first-run length is exactly 30,919 + 292 + 107.
From review:
- /api/osm/features now refuses cross-site browser requests like the other
quota-bearing routes, so a page elsewhere cannot spend the operator's
Overpass. SECURITY.md lists the route, its limits and its disk cache.
- One client runs one search at a time and two run at once in all, instead
of one global slot any single client could hold.
- A search gets 45 s across every configured endpoint in turn, answered 504
when it runs out.
- A cache write no longer waits on the disk prune; prune() waits until the
cache is idle for callers that need it.
- fmtArr prints reveal-err and flags an angle violation on a timeout result.
- Regression: a late hidden reveal frame records no angle and stays retryable.
- README/SECURITY: $host drops a non-default port, so recommend $http_host.
- requestAdmission tests: say why a new admission test must use freshClock.
- observeArrivalRotation reads the sample before the deadline check and keeps
a late frame's angle on the timeout result; arrivalAngleViolated then makes
it final. Regressions: wrong late reveal and wrong late settle, each followed
by a clean second attempt, still fail; a clean late frame stays retryable.
- Overpass admission tests: a monotonic per-test clock removes order
dependence on the module-level limiters; the proxy test covers ::1 and
::ffff:127.0.0.1 sockets; a new test pins the proxied: upstream bucket.
- Retry edges (wrong on-time reveal, maxAttempts, inclusive 10° limit) and a
check that every name the track harness imports is exported.
- Docs: nginx needs Host, X-Forwarded-Proto and X-Forwarded-For; Docker bridge
networking makes every host client one remote peer; list the exact
forwarding headers; owner misses can also see 503.
- /api/overpass: a loopback socket with forwarding headers (a local reverse
proxy) is admitted from the remote pool under a socket-keyed proxied: bucket,
never the owner's direct-loopback window; the upstream limiter uses the same
key. Regression: owner cache hits survive an exhausted proxy bucket.
- Arrival check: a reveal timeout keeps the settle angle it measured; the new
observeArrivalRotationWithRetry retries only inconclusive timeouts, so a
real violation cannot be retried into a pass. Regression: wrong settle angle
-> reveal timeout -> clean second attempt still fails.
- SECURITY.md, README, changelog and CURRENT-STATE: scope the guarantee to
admission isolation, name the forwarding headers a local proxy must send,
and state that the upstream budget stays shared.
The CCTV routes now use the keyless cross-site checks, which refuse cross-site
browser requests but accept forwarding headers, so cameras work behind the
documented reverse proxy. The Street View fallback is the one step that spends
a key; a request with forwarding headers skips it and gets the placeholder
frame, as when no key is configured.
Camera catalog image URLs were pinned by string prefix, so a URL that only
began with the agency's directory before dot segments or an encoded separator
were resolved still counted as inside it. The pin now parses the URL and
requires the same scheme, the exact host, no credentials, the default port and
a normalized path inside the pinned directory. Redirects on a pinned host must
stay inside the same directory.
Document the response format checks and API response headers alongside the
existing server hardening notes.
Address gekh's review of 69a87fe2:
- P1: /api/overpass now uses admitSameSiteKeyless, like /api/terrain/heights,
so an instance behind the README's reverse proxy keeps its Overpass-backed
layers; cross-site shapes are still refused and forwarding headers no
longer launder them. SECURITY.md, the gate header and CURRENT-STATE say so.
- P2: admission keys IPv6 peers by /64 and folds IPv4-mapped peers
(clientNetworkKey), and loopback has its own 300/min window outside the
900/min global, so a few LAN peers cannot lock the owner's browser out.
- P2 (track): the settle and reveal frames each get their own 500 ms budget,
measured from moveEnd and from the settle frame respectively, so a ~300 ms
SwiftShader frame no longer trips the reveal deadline while both stay
inside the 1 s idle refresh.
- Smaller: drop the dead settings-block check and stale probe comment in
query.js, clamp whitespace-tolerant [ timeout : N ], and add tests for the
global window, the /64 keying, loopback headroom, proxied admission and
cache hits spending admission but not upstream budget.
Co-Authored-By: Claude Fable 5.1 <[email protected]>
Main gained three imagery providers (Google Street View, KartaView,
Panoramax), shared line-coverage, cone and photo-viewer modules, one source
lit at a time and the translated interface. Their shared modules still
carried what this branch removes, so the merge ports them onto it:
- lineCoverage.js is this branch's coverage.js made provider-neutral
(draped lines near the ground only, the selection drawn over them, key
and rate-limit blocking); sequenceCones.js is sequences.js the same way.
Mapillary, KartaView and Panoramax all build on them; Mapillary moves
back to providers/mapillary/ beside the others.
- No ground casting, mesh sampling, surface modes, FOLLOW, legend, prewarm,
orbit overview points (Panoramax's density dots included), stale-tile
swaps or water-filled point budget come back.
- Kept from main because the new providers need them: requiresMapStack and
attachMapStackController (Street View on Google 3D only), ground clicks,
openNearest with an optional provider nearestImage, openImage {frame},
reportError, the view-cone marker (now an SVG glyph), filters /
coverageLabel / sinceBasis, OPEN STREET VIEW, keyAlternatives and i18n.
- photoViewer.js treats the viewer as expanded when its wrap is full screen
or the iPhone popover, as EXPAND now is.
- The fixture browser gate keeps its 8 steps and adds one each for
KartaView and Panoramax; catalogs, docs, boundaries and format scope
follow.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Review follow-up on #975. The shared same-site gate refuses any forwarding header, which is right for routes that spend a key, but terrain is keyless and needed for rendering: behind the reverse proxy the README documents, every /api/terrain/heights chunk got 403 and fell back to the geoid. Terrain now uses admitSameSiteKeyless, which keeps the Sec-Fetch-Site and exact-Origin checks (comparing Origin against a single X-Forwarded-Proto scheme) but does not refuse forwarding headers. The shared admitSameSite gate is unchanged for every other route. The changelog entry moves to changelog.d/975-terrain-cross-site-gate.md.
Co-authored-by: daikaginza <[email protected]>
Resolve SECURITY.md against the Street View provider (#966): the browser
key now loads the Maps JavaScript API as well as Map Tiles, so the
'Map Tiles only' guidance becomes 'Map Tiles + Maps JavaScript API'
here and in CHANGELOG, CURRENT-STATE and google-key.js. The CHANGELOG
entry moves to [Unreleased]; its old section shipped in 0.2.0.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
main grew the Street Level provider registry while this branch removed it
(#982–#985: injected providers, an empty composition, the `r` switch field).
The registry, params, uiState and pick router come back as main has them and
the slimmed layer sits behind the provider contract:
- The core (index.js) drives providers as on main, without surface modes,
ground casting, FOLLOW, prewarm and nearest-image lookups. A provider's key
status is asked with a 10 s timeout and asked again on a switch-on while no
key is known.
- Mapillary is mapillaryProvider.js over the slim coverage, sequences and
viewer modules, which read the filter and the active flag from the provider
context.
- The viewer host mounts one provider adapter at a time, no prewarm.
- The panel has a chip per provider again (the pill switches the layer);
no legend, EXPAND stays the Fullscreen API.
- The contract drops what no provider implements: groundCaster, meshSampler,
getSurface/setSurface, nearestImage, prewarm, reportError, the legend and
surface fields of the UI snapshot.
Co-Authored-By: Claude Fable 5.1 <[email protected]>
Conflicts with upstream's Street Level provider composition and share-state
codec, resolved:
- Street View's switch moves from its own share option (`g`) to upstream's
provider-switch field (`r`, e.g. `0.r.google-1`); a link without it keeps
Street View off. Docs and the browser gate follow.
- createApplicationStreetLevel keeps upstream's injectable provider list;
its default, once the application supplies its Street Level source, is
Mapillary plus Google Street View. Without that source there are none, as
upstream intends.
- The coverage hint keeps upstream's empty-composition message and joins
every switched-on provider's hint otherwise.
- CHANGELOG, README and SECURITY keep both sides' entries.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Docker delivers the host's own browser to the container from the container
network's gateway, never from 127.0.0.1, so the loopback-only admission gate
answered every POWER UP request with 403 and no key could be saved. The README
and CHANGELOG claimed otherwise; both are corrected here.
- keySetupCore: GEV_KEY_SETUP_TRUSTED_PEERS, an exact-address list (no
wildcards, prefixes or hostnames) admitted alongside loopback. Unset trusts
nothing, and the sharing, Host, Origin, Content-Type and proxy-header checks
all still apply to a listed address. Twelve assertions pin each refusal.
- scripts/docker-start.mjs: the container entry point, shaped after
scripts/pinokio-start.mjs. It reads the default gateway from /proc/net/route,
trusts exactly that address, and starts Vite. No gateway (--network none)
trusts nothing. The pure helpers are unit-tested and a contract test pins the
Dockerfile CMD and the loopback-only publish.
- Dockerfile: install git. `npm test` builds fixtures with `git init`, so the
suite failed 71 tests inside the image and the README's claim that it runs in
the container was wrong.
- SECURITY.md and .env.example document the setting and why it is safe only
behind a 127.0.0.1 publish; README gains the Linux/NAS id note and .dockerignore
drops macOS AppleDouble sidecars, both reported on the PR.
Verified in Docker on a clean build: saving a key from the panel writes the
bind-mounted .env (0600 in the container), it survives `compose down`/`up`, and
REMOVE comments it back out. A foreign Origin, a foreign Host, a proxy header
and a sibling container on the same network are each refused. `npm run doctor`,
`npm test` (5067 passed, 1 skipped, 0 failed) and `npm run build` are green
inside the container.
Reported-by: @jklaze
Co-Authored-By: Bogdan Petrut <[email protected]>
Co-Authored-By: Claude Opus 5 <[email protected]>
Maintainer follow-up to #966 review:
- A failed panorama-details lookup now waits DETAILS_RETRY_COOLDOWN_MS
(5 s) per panorama before a view event can retry it, so dragging the
view after a failure no longer issues a lookup on every pov change. A
success clears the pause; one panorama's failure does not delay another.
- SECURITY.md notes that allowing maps.googleapis.com in script-src also
trusts its JSONP endpoints, an accepted limitation alongside the
existing 'unsafe-eval' allowance.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Google's Maps Platform terms forbid Street View imagery beside non-Google
maps, so the provider declares requiresMapStack: 'photoreal': off Google
3D its chip is dashed with the reason, lookups and opens skip it, and
leaving Google 3D closes its panorama.
- Ground clicks: only a click on the map itself (scenePick.isSurfacePick:
nothing picked or Google 3D tile content) at street zoom opens Street
View, and the camera stays put; higher up the hint says to zoom in.
scenePick.pickGroundPosition replaces the copy in Directions.
- Viewer: poses go out at once and again when the date and address
arrive, so an open never hangs on that lookup; one lookup per panorama,
seeded by the nearest lookup; a close settles a pending open; failed
lookups are asked again; poses follow position changes, not pano_changed.
- Loader: the gm_authFailure handler is installed once, so a retried load
reports a refusal once.
- Viewer host: a prewarm that lands after another provider took the host
is released; FIT/FILL availability is set on every open.
- Provider: a refusal while switched off reports no error over another
photo; SINCE compares against the end of Google's month; messages name
the referrer and network causes; FLAT says Street View is 360° only.
- The layer row names the key of the providers that are on; the MCP panel
CSP admits Street View's tiles, control images and photos.
- Tests for each, against fakes that now follow Google's event order; the
browser gate restores its state, waits instead of sleeping, aims its
panel clicks and corner drags, and asserts the camera stays put.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Google Street View registers beside Mapillary as provider `google`. It runs
on the Maps JavaScript API with the browser GOOGLE_MAPS_API_KEY, loaded on
first use (mapsLoader.js), and uses Google's own StreetViewPanorama as its
viewer adapter, emitting provider-neutral poses (address and month in the
caption, a link to Google Maps, steps along Google's arrows, FOLLOW on
Google 3D). Its chip starts off because every panorama is billed to the
key; the share option is `g`.
Google offers no coverage layer for other maps, so the provider draws
none: with it on, a click on bare ground at street zoom opens its nearest
Google-collected outdoor panorama (groundClick.js). A key Google refuses
reads KEY REJECTED and fails a pending open at once; a lookup Google never
answers fails after 10 s.
Core: providers may declare `groundClick` and `defaultOn`; poses may carry
`capturedAtPrecision` and `title`; the coverage line keeps every
provider's hint; opening one provider's image releases another's
prewarmed viewer; FIT/FILL hides for viewers without render modes. CSP
script-src admits https://maps.googleapis.com. The browser gate gains two
Street View steps (the keyed one skips as 'no Google key' in CI).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Drop the disk tile cache (.gev-cache/mapillary/tiles, background sweep,
size cap, legacy retrim), the server-side 401/403/429 holds, the upstream
concurrency semaphore and per-waiter abort bookkeeping. The client already
pauses on 429 and stops on a rejected key.
Keep: server-side token, {configured}-only status, strict coverage path
validation (z11-14), image-layer trimming, same-site gate and per-IP limit,
HTTPS redirect pinning to the tile origin, the streamed size cap, the error
mapping the client reads, a 24 h byte-budget LRU memory cache, in-flight
coalescing via the shared coalesceProxyRequest, and browser Cache-Control.
Routes and constants fold into mapillary.js and mapillary/tiles.js.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Trim the doc text this PR adds (README, CHANGELOG, CURRENT-STATE,
KNOWN-ISSUES, SECURITY, DATA_SOURCES, .env.example, the CI job comment),
drop code comments that restate the code, cut design-note JSDoc to a line
or two, and drop review tags from test names. Comments only; no code
changes.
Also: README key count (seven keys, two metered), CURRENT-STATE's gate
paragraph (CI runs a production build with a dummy token), the stacked
doc above meshBoxInRange and the orphaned inMeshRange line in
coverage.js, and a duplicate ALPR row in DATA_SOURCES that a merge had
brought back.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
From gekh's review of #768, each with a test that fails before:
- The routes refuse cross-site requests (sameSiteGated, as the paid
proxies do) and the tile route has a generous per-IP limit (600/min), so
another page cannot burn the token's quota or trip the shared 429 hold.
- At most six upstream fetches run at once; a queued request that is
abandoned never fetches, nor does one abandoned during the disk read.
- A body past the 48 MB cap aborts the upstream request as it streams.
- Empty tiles are charged against the memory and disk budgets.
- Each disk write uses its own temp file and a retrim is skipped while a
write of that tile is pending, so concurrent hits cannot extend a tile's
life or fail a rename.
- Upstream refusals other than 401/403/429 answer 502.
- The tile route's success path is tested end to end (200 with the image
layer stripped and the right headers, 204 when empty, an abandoned
response aborts upstream); the teardown race that made this file flaky
is gone (240 parallel runs, no failure); the QA-constant tautologies are
replaced by a check against the real provider registry; the boundary
group lists the modules the provider actually imports.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The flight, military and vessel feeds were named after the providers the
bundled server uses (/api/opensky, /api/adsblol/mil, /api/ais-live and
their track routes; createOpenSkySource, createAdsbLolSource,
createAisStreamSource). Any server should be able to answer a feed from
its own provider, so the feeds are now:
/api/flights /api/flights/track?icao24=
/api/military /api/military/track?hex=
/api/vessels /api/vessels/track?mmsi=
with createFlightSource, createMilitarySource and createVesselSource. The
old routes are removed. Each server names its provider in X-Feed-Source
(the bundled server sends OpenSky Network, adsb.lol and AISStream, so its
attribution is unchanged) and the military feed's cache state and age in
X-Feed-Cache and X-Feed-Age-Ms. Sources report the provider the server
names and fall back to the feed's name.
Brings in 123 commits from main, including the v0.2.0 and v0.2.1 releases
(MCP server and tool catalog, server security hardening, build hygiene).
Conflicts:
- package.json: kept main's script order and added this PR's
qa:panel-resize and qa:street-level; exports keep both sides (main's
tools/view entries and this PR's street-level and Mapillary entries).
- src/tooling/viteBuild.test.mjs: kept this PR's Mapillary-token define
assertion and main's new wildcard-host allowedHosts assertions.
- CHANGELOG.md: main now has release sections; this PR's entries go under
[Unreleased].
Checks after the merge: doctor, format:check, check:boundaries,
layer-token:check (28 published, 1 new: street-level 0), npm test (5726
pass), build, the Windows job's focused tests (70 pass), qa:panel-resize,
and the keyless street-level gate. The new CSP allows Mapillary (https:
connect/img, blob workers). The keyed gate stops at coverage locally
because the dev .env Mapillary token is invalid (upstream 403), not because
of the merge.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The Content-Security-Policy blocked the YouTube player API, the Facebook
video SDK and X's post widget that src/data/bhoteKoshiEmbeddedMedia.js
loads, along with their players and posts in frames. script-src now allows
exactly those three script origins and a new frame-src allows YouTube,
youtube-nocookie, Facebook and X embeds. A test ties the policy to the
frames the media module builds and pins the allowed script origins.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
/api/google/text-search spends the same Google quota as nearby-places but
was not behind the cross-site gate. It now refuses cross-site requests
before calling Google, and a test covers both paid Google routes.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Vite installs its Host check after the middleware plugins add in
configureServer, so the provider and /api routes answered any Host,
including a DNS-rebinding name. hostCheckPlugin runs first on the dev and
preview servers and applies Vite's rule with the same allowed hosts: IP
addresses, localhost and *.localhost, the configured server host, and the
listed names. A test drives a real Vite server with an unlisted Host.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Binding HOST=0.0.0.0 no longer sets Vite's allowedHosts to true. The dev and
preview servers accept IP addresses, localhost and the LAN hostnames listed
in GEV_ALLOWED_HOSTS; suffix and wildcard entries are ignored. The
configuration factory takes the resolved list as an input, so build/vite.js
still reads no environment.
Ported from #97 to the current build/vite.js layout. Fixes#21.
Co-authored-by: Sameh Khamis <[email protected]>
Co-Authored-By: Claude Opus 5.5 (1M context) <[email protected]>
The OpenAI endpoints (/api/realtime/token, /api/openai/hud-summary) now
allow 30 requests per minute per client IP and the Google Places endpoints
120, the caps the Pinokio build already ships. GEV_RATELIMIT_OPENAI_PER_MIN
and GEV_RATELIMIT_GOOGLE_PER_MIN still override them and exactly 0 disables
them; an unreadable value falls back to the default rather than to
unlimited.
Salvaged from #683 onto current main.
Co-authored-by: Sameh Khamis <[email protected]>
Co-Authored-By: Claude Opus 5.5 (1M context) <[email protected]>
The cost-bearing endpoints (/api/realtime/token, /api/openai/hud-summary,
/api/google/nearby-places) and the voice debug log refuse cross-site browser
requests: a foreign or opaque Origin, a Sec-Fetch-Site other than
same-origin/none, or proxy forwarding headers. Loopback tools without an
Origin and the LAN opt-in keep working. The dev and preview servers send one
shared Content-Security-Policy, and embed-mode framing rewrites only the
frame-ancestors directive of it.
Salvaged from #242 onto current main.
Co-authored-by: Sameh Khamis <[email protected]>
Co-Authored-By: Claude Opus 5.5 (1M context) <[email protected]>
SECURITY.md gains a section on what /mcp accepts, the panel's request key,
the browser keys the panel build carries and embed-mode framing. TOOLS.md
now describes what panel_request may request, and the changelog records
the recent MCP and embed changes.
Co-Authored-By: Claude Opus 5.5 (1M context) <[email protected]>
Describe the provider-neutral layer, the PROVIDERS chip row, the shared
filter and its share-link options, and how a new provider registers.
Drop every mention of the removed plain-English query and Anthropic key.
Co-Authored-By: Claude Fable 5.1 <[email protected]>
Upstream took share token '2' for fire perimeters, so Street Level moves to
'3'. mapillary-js joins upstream's optimizeDeps include list instead of
overriding it; catalog and registry tests count the new upstream layers.
Co-Authored-By: Claude Fable 5.1 <[email protected]>
Adds a Local ADS-B layer fed by your own receivers: a browser WebUSB
RTL-SDR (with FM listening) and local 1090/978 MHz decoder feeds
(LOCAL_RECEIVER_FEEDS, local and private addresses only). Local aircraft
draw in magenta with class, silhouettes, 3D models, trails and a position
sanity filter; the click card names the band and input that heard them.
Builds on Sameh Khamis's SDR prototype and the initial GEV port by
Mazeyar Moeini Feizabadi (#134); the decoder-feed design follows the
notes on #57. Closes#57.
Co-authored-by: Sameh Khamis <[email protected]>
Co-authored-by: Mazeyar Moeini Feizabadi <[email protected]>
Twenty layers now (weather, wind, cyclones and recent imagery landed
upstream); Street Level sits after Recent Imagery in the right rail and the
Cameras group, and the rail CSS names it beside the other panels.
Co-Authored-By: Claude Fable 5.1 <[email protected]>
Wind (NOAA GFS and ECMWF IFS: animated particles, colour field, a reading at map centre), observed weather (NOAA MRMS radar, GOES and NESDIS infrared clouds, lightning density) on one shared history timeline, NHC and CPHC cyclone advisories with tracks and cones, and a WEATHER panel in the right rail. On 3D Tiles the observed products render as raised shells with a sharper window around the view.
Co-authored-by: Gustavo Beneduzi <[email protected]>
Co-authored-by: Daniel Slay <[email protected]>
Co-authored-by: Rehaan Delmotra <[email protected]>
Co-authored-by: Cursor Agent <[email protected]>
- Google's Geocoding web service refuses referrer-restricted keys, so the
browser call forced GOOGLE_MAPS_API_KEY to ship unrestricted
- add /api/google/geocode and /api/google/reverse-geocode, using the server
key like Places and Street View already do
- the browser key now needs the Map Tiles API only
Manjunath