createApplicationTools({ drawMarkActions }) adds an application's buttons to
the rows of drawn areas and lines. An action gets the shape's id, kind, name,
row title and [lon, lat] geometry, and what it returns or resolves to is a
note under the row. The standalone shell passes none, so the open-source
build is unchanged.
The orbital Context card is gone and the Contact card stays hidden in orbit
again. Live Signals page 1 had nothing in orbit but TRACK ACQUIRED, because
orbit feeds no Contacts snapshot; it now lists what is around the
satellite, built the way the aircraft rows are, five rows with stable keys
rebuilt once a second. Rows already shown keep their places while they
still qualify, so a site passing under a low orbit is not pulled from under
the pointer.
Site rows come from the Mapped Installations layer (getNearby, asked only
as far as the reach extends) and focus their site, or release it on the
focused site's row, which reads as the subject does. A site the layer drops
during its frequent reloads stays listed for 10 s, since sites do not move.
With the layer off nothing is listed and a SITES STANDBY row says why.
Satellite rows come from the satellites layer's bounded nearest query,
measured from the satellite itself, and ride the satellite; RETURN goes
back to the one before, skipping one that has left the catalogue. While
the camera hops to a new satellite only TRACK ACQUIRED and RETURN show, so
nothing is measured from the old position. An arrow pressed while a focus
eases back takes the arrows' own clock. Site and satellite rows name their
own actions.
In the orbital view a double-click on a mapped ground point went on to
Cesium's own double-click, which tracks the picked entity and so ended the
view. The Cockpit's double-click routing now takes it in orbit: it keeps or
starts the focus on that point (a point beyond the reach is left unfocused
but still not tracked). A double-click anywhere else, one a tool owns, and
every one outside orbit go on to Cesium's as before, and stopping the
Cockpit still hands Cesium's handler back.
In the satellite orbital view a single click on a mapped ground point (a
ground point of a layer that is on, such as a Mapped Installations site, a
fire or a local data pack feature) keeps the camera on it. Each frame the
look is aimed from the satellite's position to the point's Earth-fixed
position in the track-up nadir frame the arrows tilt, so the point stays
at the centre as the satellite moves. The swing onto the point, or between
points, uses the arrows' easing on a slower clock and then holds the point
exactly; reduced motion cuts.
A click elsewhere, FOCUS on the focused point, NADIR, Home or 0 ends the
focus and the view eases back to nadir; an arrow ends it and tilts on from
where the view is. The focus also ends, easing back, when the point leaves
the ±45° reach or the satellite's horizon, when its layer is turned off or
its record is dropped, and with the view. While focused the readout gives
the single off-nadir angle to the point (OFF-NADIR 23.4°), names it in a
polite live region, and the swath reads approximate as for a tilt. Clicks
still reach Cesium's own handler and never untrack the satellite; a click
a tool owns is ignored.
Under the readout, IN REACH lists the mapped points facing the satellite
that are within the reach or in the frame, nearest to nadir first and at
most 12, rebuilt once a second. A row opens the point's position, source
and OpenStreetMap tags (or its layer's properties); FOCUS focuses it,
switches to it, or ends the focus held on it, and is unavailable for a
point in frame but beyond the reach.
An imaging satellite with a known sensor can now zoom past 8x, up to 128x,
as far as the view stays at least as wide as the sensor's narrowest
standard swath at its live altitude; only swaths confirmed on a cited page
open those steps. The top step follows the altitude and window shape and
steps back when it falls below the zoom shown.
The view draws the sensor's swath to scale along the ground track with a
SENSOR SWATH readout (approximate off nadir), and a SENSOR button zooms to
exactly that width when it lies in range at nadir. From 16x the imagery
tiles the view will need 5 to 20 s ahead along the ground track are
pre-loaded at the matching level. The mouse wheel steps the zoom one notch
at a time, and the identity line shows how old the TLE is. The sensor
figures come from a new bundled pack of 46 Earth-observation platforms,
each value cited to its operator or agency, with its own data credit.
With a satellite tracked and no aircraft tracked, Cockpit can ride the
satellite. Entry needs only the Satellites layer; debris can be tracked but
not entered, and voice stays aircraft-only. Double-clicking the tracked
satellite or the entry buttons (reading ORBIT) enter it.
The camera sits on the satellite's per-frame SGP4 position and looks
straight down, turned to the ground track (north-up for a satellite with
none). The optical zoom steps 1x to 8x with a focus pull, the arrows tilt
the view up to 45 degrees off nadir, and Home or 0 returns to nadir. Off
nadir the tilt reads its total angle first and the swath readout becomes an
approximation marked with ≈. While in orbit the map leases flat Esri
imagery, the cloud pass stays off and the view opens in the optical style.
The orbital HUD names the satellite with its owner's flag (from the
flag-icons package, loaded per country) or an organisation badge, its
operator, class, NORAD and COSPAR ids and TLE epoch with the element lines
on request, altitude, orbital speed and the sub-satellite point. CURRENTLY
OVER names the country and its first-level division, or the sea, and from
8x the most prominent populated place nearby, looked up offline from the
bundled Natural Earth packs (populated places are a new pack). The
satellites layer hides the ridden satellite's own marks, dims the other
orbit rings and ignores scene clicks and Escape while held. Exit restores
the camera's field of view and the satellite's follow camera.
C no longer enters or leaves Cockpit, bridge or orbit: it is left to the
app-wide CCTV shortcut, and Escape or the exit button leave first person.
Both reviews of the timeout found that Cesium cannot cancel a full-detail
read: each one given up kept its nine picks traversing every frame, so
stalled tiles piled up a new set every 30 s, while slow but valid answers
were dropped. Raise-only loaded reads then locked in a wrong-high height.
Back to one full-detail read at a time whose answer always applies, and
loaded reads that may adjust a river height but never take it to the sea;
a coarse probe can again lower it partway until the full read lands.
Keeps the test for another ship selected inside the double-click memory,
and corrects CURRENT-STATE: a failed read keeps the height it had.
Before the first full-detail read lands, a loaded-tile read could still
lower a river height partway (27 m to a 15 m bank). Loaded-tile reads now
only raise it; lowering is the full-detail read's to say.
That makes a full read that never lands (stalled tile requests) hold a
wrong height for the whole bridge, so one still running after 30 s is given
up for a fresh one; its late answer is dropped.
Also tests the other half of the double-click memory fix: another ship
selected within the memory is not entered through the first ship's spot.
Before the first full-detail water read lands (it can take many seconds
from cold tiles), a refresh's loaded-tile read with one low probe still
dropped a river height to the geoid. Before that landing, loaded-tile reads
may now find raised water but only a full-detail read lowers it.
CURRENT-STATE also says what the earlier fixes changed: C stays the CCTV
shortcut when the bridge cannot be entered, voice entry is refused on a
bridge, and the ridden ship's trail is hidden with its sprite.
The first press's picture of the ship survived a change of followed
subject: following an aircraft (or another ship) within 700 ms let a
double-click on the old ship's spot enter the new subject. The memory now
carries the ship's MMSI and is used only while that ship is still the one
followed.
The vessel layer draws other ships at their last AIS fix and does not
advance them, so dead-reckoning radar contacts moved the mismatch from own
ship to everyone else: a 15 kn ferry reported 90 s ago showed ~700 m ahead
of the ship out of the window. Own ship stays centred where the camera
rides; contacts go back to their last fixes, and the query drops the extra
reach and candidates (which could also cut the nearest ship in a crowd).
The bridge tests drive a hand-written layer, so nothing exercised the
vessel layer's own scene-click gate. A wire test now clicks open water with
the bridge holding the ship, then again after release.
The Contacts test that adopts Live AIS Vessels directly is renamed to say
so: it never rides a bridge.
The ship bridge rules were appended to cockpit.css, taking it to 2705
lines; they move unchanged to cockpitBridge.css, imported right after it so
the cascade is the same. cockpitBridge.css and cockpitRadar.css join the
format scope and the styles package.
The first press's picture of the track is there because a click on a
selected ship re-centres the camera. It applied to followed aircraft too,
widening their double-click hit area to wherever the aircraft was drawn
as the gesture began. Aircraft are back to the hit where they are drawn.
The ground clamp read the floor at the ship's last AIS fix while the camera
rode that fix dead-reckoned up to 180 s ahead, so a quay or bridge deck at
the old position could lift the eye. Vessels now read the floor at the
dead-reckoned target, as the water read already does; aircraft are
unchanged.
The radar centred on the ship's last AIS fix while the camera rode that fix
dead-reckoned up to 180 s ahead: at 20 kn about a nautical mile apart, so a
ship already passed still showed ahead. Own ship now sits where the camera
rides and each contact is dead-reckoned to the same moment; the query reaches
past the range for ships that have since moved into it.
Ships with no MMSI each get a key of their own instead of all sharing an
empty one on the scope.
A full-detail water read that sampled nothing (tiles not loaded) fell back
to the geoid, and while a full read ran, a loaded-tile read with one coarse
low probe did the same: on the Seine either dropped the eye ~27 m under the
water until the next read. An empty read is now no answer, and once a
full-detail read has answered only full-detail reads change the height.
The read sequence numbers go: only one full-detail read runs at a time,
so a late read can never be older than one already applied.
Voice entry tracked an aircraft first, which cleared the vessel selection
and ended the bridge, and then failed because Cockpit was still active:
no bridge, no cockpit, no selected ship, and voice said entry was
unavailable. It now refuses before it touches tracking and says to exit
the bridge first.
With a vessel selected and no aircraft tracked, Cockpit took C and stopped
it even when the bridge gate was shut, so the key did nothing and CCTV no
longer toggled. C is now taken only when the bridge can be entered.
The arrow keys also stay with comboboxes, spinbuttons, trees, grids,
menubars, scrollbars and text boxes on a bridge, which move with them.
Adds a complete Swedish catalog (2,961 messages) and registers sv in the
locale list, catalogs, language picker and package boundaries. Browsers set
to Swedish get it at once; ?lang=sv or the language picker choose it
elsewhere. Numbers and dates come out Swedish from Intl.
- docs/translations/sv.md: style (imperative without a pronoun, closed
compounds, decimal comma, space before units and %) and the glossary.
- Entries that stay identical to English on purpose (codes such as HDG and
FOV, product, place and source names) are listed under sv in
same-as-english.json.
- The picker-order test places Svenska after Português.
- docs/CURRENT-STATE.md and docs/TRANSLATORS.md list the new language.
The translation comes from God's Eye View Sverige, a Swedish fork, and was
brought up to date with main (wildlife sightings, event age filter, traffic
styles and the rest).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The camera port gains an optional followFrame() (capability followFrame):
the frame the eye is placed in now, as a column-major 4x4 matrix to ECEF.
Once a follow has framed the camera it is the follow's own frame
(east-north-up, or the orbit frame an autodetect follow chose), under
lookAt the target's east-north-up frame, otherwise the identity. setView
places a world pose and keeps that frame. The Cesium port reads it from
camera.transform, only when the capability is on; the stub from its own
eye frame. A conformance check covers the world, lookAt and enu-follow
frames, the offset in it, and setView keeping it.
src/ui/shareFollow.js now reads the pose, the frame and the follow offset
through the camera and frame ports: a shared offset is re-expressed in the
follow's own frame as before, satellites included, and the eye is placed
with setView at exact heading, pitch and roll, so a near-vertical view
keeps its roll. placeFollowEye returns false on a camera that cannot say
its frame. offsetFromHeadingPitchRange moves to src/geo/frames.js, shared
with the stub.
The flights and military layers now reach the renderer only through its
ports: motion, queries, state, tracking, enrichment, evidence and policy
read the camera pose, project through the query port, request and
suspend frames through the frame port, and key per-frame caches on the
frames drawn rather than the scene's frame number. Policy is plain data,
the enrichment view test is pose-based, and the tracked aircraft is an
icon in a draw-port set with a plain holder standing in for the entity
that Cockpit, the tracked card and share links read.
The mesh floor sampler can sample through the query port, excluding
named draw sets, and both layers use it that way. A pick of another
layer's tracked icon is never taken for one of a layer's own contacts.
Twelve layer files leave the Cesium allow-list.
Geo import asks the frame port for renders, the camera port for moveEnd and
the globe port's progress for the terrain queue running dry; its data sources
are added, removed and shown by the listed geoImportPins module. Voice capture
waits on the frame port's postRender. Visual settings toggle the infrared fog
through the globe sky port, and the anime style dims the Milky Way through a
sky getter it is given. The scope mask reads the camera height and listens on
the frame and camera ports. Recent imagery picks the view centre, reads the
view rectangle and the field of view through the query and camera ports.
Installations claim camera sensitivity from their rendering module. The
application shell loads the unbound globe factory.
Files off the Cesium list sized themselves by, listened on and set the
cursor of `viewer.scene.canvas`. They now read `canvasOf(viewer)` from
src/render/rendererOf.js: the bound renderer's canvas, else the viewer's
own, the same element. Recent Imagery's divider moves the split through the
globe port (`globeSplitTarget`, moved from the flood event into
src/ui/imagerySplit.js), and traffic flow passes the viewer to the listed
surface module (`viewerRoadSurface`) instead of reaching for its scene.
The test fakes give their viewers a canvas, and the fake renderers report
it, as the Cesium renderer reports the viewer's.
src/data/geoFileImport.js now only reads, bounds and sanitizes the
imported files (GeoJSON, GPX, KML and KMZ). Loading the parsed file as a
Cesium data source, scrubbing its entities, settling its ground pins,
the pin billboard collection and the footprint read for Fly-to move into
src/data/geoImportPins.js, which stays on the Cesium list as the
import's Cesium-bound part. The error, the entity limit, the one-minute
deadline and feature-name cleanup both parts use live in the new
src/data/geoImportShared.js; the reader re-exports them for its
existing importers.
Nothing changes for the person importing: the same files load with the
same refusals, styles, ground heights, pins and framing.
Cockpit now places its eye with the geo maths and moves the camera
through the camera port on the frame port's preUpdate, so cockpitCamera.js
and cockpitController.js no longer load Cesium and leave the allow-list.
Whether the aircraft still draws comes from a trackedEntityDrawn service,
which the application shell answers from the viewer's entities. The mesh
floor probe accepts the viewer as well as its scene.
The camera verbs size their keyhole fit by the renderer's canvas and listen
on it for the user's input, and the voice actions size their view samples
by it, rather than reaching through `viewer.scene`; a viewer with no
renderer bound answers with its own canvas, the same element. The test
fakes give their viewers a canvas, and a fake camera binding's renderer
reports the fake viewer's.
With no aircraft tracked, Cockpit can ride the selected AIS vessel. Entry
needs only Live AIS Vessels and a selected vessel; C, double-click and the
entry buttons (reading BRIDGE with a ship icon) enter it, while voice stays
aircraft-only.
The eye sits on the AIS position at a representative bridge height for the
vessel's type family, looks along true heading and moves along course over
ground. The last fix is dead-reckoned for up to 180 s between the layer's
refreshes, and on rivers and lakes the waterline is read from the rendered
surface around the ship rather than the geoid.
The bridge HUD shows speed and course over ground, a straight heading
tape, window mullions, the AIS destination as a reported voyage and a
heading-up radar of nearby ships (3 to 24 NM). The arrow keys look around,
Home or 0 looks ahead again. The vessel layer hides the ridden ship's
sprite and card, ignores scene clicks while held, and returns the camera
to the vessel's map view on exit.
The full-globe ring reads the eye from the camera port's pose, projects the
Earth's centre through the query port, paints on the frame port's
postRender and asks it for the frame that ends a focus flight, and flies
out through the camera port with a geodetic destination. The sun and moon
come from the shared planetary model in geo/celestial, rotated into the
Earth-fixed frame: the precise ICRF frame once its tables have loaded,
which the application shell supplies from the starry sky
(icrfToFixedAxes), and the pseudo-fixed frame before, as Cesium's own
fallback did. It still reads the viewer's canvas and container, which are
DOM.
projectEarthDiscToViewport keeps its scratch arguments: the eye-to-centre
vector is still written before the facing test, which radio navigation
reads after the call.
The annotations entry loaded the Cesium port factories only through the
ring; its world renderer, which stays on the list, now loads them.