KartaView's server filters by upload date only, so SINCE goes by it
throughout for KartaView: the lines (as before), the photo a click opens
and the cones, the cut-off taken as its UTC day as KartaView's startDate
(passesKartaViewFilter). Providers may declare sinceBasis: 'upload'
(validated); while one is lit the panel shows "KartaView: by upload date"
under the SINCE slider, read out with it. The gate checks the note, and
step 13's picks get 60 s on a loaded machine.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
KartaView filters coverage on its server only in its PNG tiles (its JSON
tiles come back empty with a filter), so a filtered tile's PNG is a mask
over the cached JSON segments: a segment stays when at least half the
points along it lie on drawn pixels. A filter change reloads the lines
(lineCoverage.reload keeps the drawn ones until the new ones are in);
masks are cached per filter and tile, and a filtered tile KartaView is
still drawing (504 or a timeout) is asked again, four tries in all.
The nearest lookup asks the photo API for the projection and date, and
the cones follow the filter like Mapillary's. The gate fixture draws
filtered PNG tiles and adds an older flat-only street; a new gate step
checks 360 and LAST YEAR thin KartaView's lines and ALL brings them back.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
From a UX QA round in the browser against the live API:
- A line click could time out while coverage loaded: the meta-catalogue
speaks HTTP/1.1 only (six connections), and six tiles plus four
searches queued the lookup behind megabyte tiles. Tiles now take
three connections and searches two; a search that timed out is asked
once more.
- Between 30 and ~100 km Paris read as empty: the density grid is ~10 km
a cell. Lines now draw to 60 km (z10), as Mapillary's do; above, dots
grow with the pictures they stand for.
- Esc in the docked viewer collapsed the whole panel instead of clearing
the sequence the panel says it clears (shared photo viewer: KartaView
too). The viewer now offers Esc to the provider first; expanded, the
dialog keeps it.
- A picture whose producer is an email address is credited to the
instance holding it (its `via` host), so Licence Ouverte pictures name
their source.
- Empty states say why: "no Panoramax photos here match the filters"
when the filter hid every line, and nothing to zoom into over empty
sea. Wording follows KartaView's ("photos", "click a line for its
nearest photo").
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Panoramax, the open federated street-level commons, registers beside
Mapillary, Google Street View and KartaView. Its meta-catalogue
(api.panoramax.xyz) is keyless and CORS-open, so it runs in the browser:
- coverage from its vector tiles: sequence lines at z11–14 below 30 km
(longest first under the per-tile cap), and above that the grid layer's
density cells as binned points, not counted as sequences;
- a click on a line opens that sequence's picture nearest the click
(STAC search, any direction), without moving the camera, then any
sequence's if it has none within 50 m; the 360° and since filters go to
the lines and to the API;
- cones from the z15 tiles' pictures layer around the open picture
(~110 bytes a picture, against ~7.5 kB for a STAC item), re-centred when
a picture opens outside them; ‹ › follow the picture's prev/next links;
- the caption names the author (not an account named by an email
address) and the picture's licence (StreetPose `license`), and links to
the picture in the Panoramax viewer; the globe credits Panoramax.
KartaView's viewer becomes the shared photoViewer.js (flat <img>, 360° on
panorama.js, ‹ ›, keyboard, pinch, context loss), driven by a per-provider
PhotoSources table; the request limiter moves to limiter.js. Panoramax shows
the 2,048 px SD derivative and fetches the HD original only when the viewer
is wide enough, once, shrunk while it decodes (never above 8,192 px).
Orange #ff6f00 (Panoramax's own), off by default, share option
0.m.0_0.r.panoramax-1. The MCP panel allows the meta-catalogue and the
biggest instances. Tests: policy, decode, source, viewer, provider, and a
Panoramax fixture in the hermetic browser gate.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Marker and direction (reported on the PR):
- KartaView has its own marker, a purple view cone (Street View's is
blue), not GEV's default pin that Mapillary uses.
- The camera direction (marker, cones, FOLLOW, a panorama's centre) is
the direction of travel to the next photo a few metres on. KartaView's
heading is the device compass: whole drives read 0 (no compass) and
others sit a steady ~110° off. Until the drive loads the compass stands
in (0 = unknown), and the pose is sent again once the course is known.
Remaining P4s from the review of #1121:
- Segment chaining is linear (a per-point cursor) and capped at 20,000
segments a tile and 5,000 points a line: a hostile tile of 60k segments
sharing one point took 1.5 s, now tens of ms.
- Decoded tiles are dropped when KartaView is switched off.
- No network / a refused request says so and is not retried as a timeout;
an unreadable answer says so.
- A docked flat photo skips the 2,560 px download until the viewer grows.
- The panel counts the drive's photos (countActivePhotos), not the thinned
page of cones (2,250, not 217).
- After a GPU reset the viewer redraws the photo itself, so a lookup the
user started is not cancelled; a failure is still reported.
- The gate's keyless page lights KartaView and checks it draws with no key;
the fixture answers the sequence count; the line-click step checks the
camera looks along the drive when the compass says 200°.
- README/CHANGELOG show the share-link form the app writes.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
NYC DOT asks developers who use its camera feed to sign a data-sharing
agreement, and this project does not hold one that covers downstream
installs. The pack now loads only when CCTV_NYC_ENABLED=1; unset, empty
or any other value makes no request to webcams.nyctmc.org (tested).
The NYC credit carries NYC DOT's requested application disclaimer
verbatim, and DATA_SOURCES, README, CHANGELOG, CURRENT-STATE and
.env.example describe the prerequisite.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The province's 511 pack covers Ontario's highways; this adds the municipal
network underneath it — roughly 336 cameras across downtown arterials plus
the Gardiner, DVP, Allen and Lake Shore, from the City's own open data.
The list is keyless and carries no frame URL, so frame URLs are built from
the convention the dataset documents (`CameraImages/loc####.jpg`) and a
camera number validated as plain digits. The frame proxy is therefore
pinned to the portal origin by construction rather than by trusting a
field. The list fetch refuses redirects, bounds the body it buffers, and
releases the transport on every rejection path.
The dataset publishes no camera facing. `D1`-`D4` look like a compass and
map trivially onto one, but they describe the *comparison* images — static
reference stills captured in 2016 and served from a different path — not
the live pan-tilt-zoom frame. A heading derived from them would be
confidently wrong for every camera in the city, so every camera takes the
shared id-hash fallback at low confidence, as headingless Austin, TfL,
Fintraffic and Calgary cameras do. A test pins that down so it is not
"fixed" later.
Names stay verbatim: the feed's labels are upper-case, and title-casing
would mangle MCCOWAN RD and ST HELEN'S AVE more often than it helped.
Carries the Open Government Licence – Toronto attribution the licence
requires. Disable with `CCTV_TORONTO_ENABLED=0`.
P1s from the correctness review, each with a regression test:
- Cones showed the wrong page of a long sequence (cache keyed by
sequence; no re-centre after a close or a same-drive line click):
KartaView always reselects, and re-centres whenever a photo of the
selected sequence opens on another page.
- A 360° photo's first frame was one colour: the canvas was sized while
hidden (1×1). It is shown first, and re-measured every frame.
P2/P3s: a storage timeout or 5xx is not remembered as archived (only
403/404/409/410 are); dense z13 tiles draw up to 1,600 lines (a third of
downtown Detroit was cut); decoded tiles are kept 10 min; a timed-out tile
is asked once more; pages are 250 photos and the newest page request goes
first; a photo far past deleted ones, or unlisted at a page edge, still
finds its neighbours; a step that gets no answer is not the end; a lost
WebGL context redraws the photo, and a failed one is retried on the next
mount; the first flat image comes from the proxy (KartaView's own can be
1.7 MB); fileurl fallbacks must be https storage hosts; oversized answers
are refused; keyboard (Shift+← →, ↑ ↓, + −) and pinch look around a
panorama; focus stays in the viewer when a step button disables. Docs:
share links with 0.m.0, keyless count, CURRENT-STATE matched to the code.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The fixture gate answers api.kartaview.org, cdn.kartaview.org and
*.openstreetcam.org from fixtures (a drive with a 360° photo, stored on
storage2 while the API names storage1) and adds three steps: keyless
coverage with its credit and hidden filters, a line click opening the
nearest photo with cones and ›, and a 360° photo on the panorama without
FIT / FILL. The Street View share-link check reads the switch field instead
of one exact entry, since a chip click records every provider's switch.
README, DATA_SOURCES, CHANGELOG and CURRENT-STATE describe KartaView.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- One provider is lit at a time: lighting a chip darkens the others, and a
chip click records every registered provider's switch in one update so
the share link keeps the swap (also off Google 3D, where Street View is
not listed). The layer starts with the first default-on provider
(Mapillary, free); params that light several keep the one already on,
so reapplying them never flips (litByParams). The now-unreachable
"several lit" chip paths are gone.
- Leaving Google 3D during a Street View lookup ends it without an error
or a stuck loading state (openImage's early return resets it; the
lookup loop rechecks availability).
- A source swap during a lookup no longer reports "no imagery".
- Street View lit off Google 3D says the panel needs the Google 3D map.
- Comments trimmed to the why; keySetupCore.test.mjs back to upstream's
formatting plus the one new test (was a 551-line reformat).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- The chip reads GOOGLE STREET VIEW (and its caption link likewise).
- Providers declare the imagery filters they honour (`filters`, default
pano + since). Street View declares none: every panorama is 360° and it
draws no coverage to thin, so its lookups ignore the filters and the
panel hides IMAGERY and SINCE while it is the only lit provider.
- The legend lists only providers that draw coverage lines, with
Selected only beside one: Street View alone shows no legend.
- Providers may pick their on-globe marker (`marker`); Street View's is a
Google-blue field-of-view cone from a white-ringed dot, in place of
GEV's amber pin, and switches back for a Mapillary photo.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
main grew the Street Level provider registry while this branch removed it
(#982–#985: injected providers, an empty composition, the `r` switch field).
The registry, params, uiState and pick router come back as main has them and
the slimmed layer sits behind the provider contract:
- The core (index.js) drives providers as on main, without surface modes,
ground casting, FOLLOW, prewarm and nearest-image lookups. A provider's key
status is asked with a 10 s timeout and asked again on a switch-on while no
key is known.
- Mapillary is mapillaryProvider.js over the slim coverage, sequences and
viewer modules, which read the filter and the active flag from the provider
context.
- The viewer host mounts one provider adapter at a time, no prewarm.
- The panel has a chip per provider again (the pill switches the layer);
no legend, EXPAND stays the Fullscreen API.
- The contract drops what no provider implements: groundCaster, meshSampler,
getSurface/setSurface, nearestImage, prewarm, reportError, the legend and
surface fields of the UI snapshot.
Co-Authored-By: Claude Fable 5.1 <[email protected]>
Register the keyless webcams.nyctmc.org catalog as a live CCTV source,
synthesize frame URLs from validated camera UUIDs, and keep the nearest
cameras to the five borough cores under the existing catalog ceiling.
The changelog entry sat below the 0.2.0/0.2.1 release headings after those
were cut; move it to [Unreleased] beside the Norway pack. Name Catalonia in
the README's CCTV Mesh row the way the other packs are listed.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Conflicts with upstream's Street Level provider composition and share-state
codec, resolved:
- Street View's switch moves from its own share option (`g`) to upstream's
provider-switch field (`r`, e.g. `0.r.google-1`); a link without it keeps
Street View off. Docs and the browser gate follow.
- createApplicationStreetLevel keeps upstream's injectable provider list;
its default, once the application supplies its Street Level source, is
Mapillary plus Google Street View. Without that source there are none, as
upstream intends.
- The coverage hint keeps upstream's empty-composition message and joins
every switched-on provider's hint otherwise.
- CHANGELOG, README and SECURITY keep both sides' entries.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The Path 3 section assumed readers already knew how a bind-mounted container
persists state (14traits, #208). It now lists what the app saves and where,
with the NAS and reverse-proxy detail in the collapsed block that was already
there, so the open part stays about the same length.
It also fixes two commands that did not do what they said in bash, confirmed
in bash and dash by PoBruno: `UID=1026 GID=100 docker compose up` prints
"UID: readonly variable" and still runs as the caller's UID, and
`export UID GID` exports an empty GID because bash does not define one. Both
are now `env UID=... GID=...`, which `docker compose config` resolves to the
requested ids.
Suggested-by: 14traits
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Docker delivers the host's own browser to the container from the container
network's gateway, never from 127.0.0.1, so the loopback-only admission gate
answered every POWER UP request with 403 and no key could be saved. The README
and CHANGELOG claimed otherwise; both are corrected here.
- keySetupCore: GEV_KEY_SETUP_TRUSTED_PEERS, an exact-address list (no
wildcards, prefixes or hostnames) admitted alongside loopback. Unset trusts
nothing, and the sharing, Host, Origin, Content-Type and proxy-header checks
all still apply to a listed address. Twelve assertions pin each refusal.
- scripts/docker-start.mjs: the container entry point, shaped after
scripts/pinokio-start.mjs. It reads the default gateway from /proc/net/route,
trusts exactly that address, and starts Vite. No gateway (--network none)
trusts nothing. The pure helpers are unit-tested and a contract test pins the
Dockerfile CMD and the loopback-only publish.
- Dockerfile: install git. `npm test` builds fixtures with `git init`, so the
suite failed 71 tests inside the image and the README's claim that it runs in
the container was wrong.
- SECURITY.md and .env.example document the setting and why it is safe only
behind a 127.0.0.1 publish; README gains the Linux/NAS id note and .dockerignore
drops macOS AppleDouble sidecars, both reported on the PR.
Verified in Docker on a clean build: saving a key from the panel writes the
bind-mounted .env (0600 in the container), it survives `compose down`/`up`, and
REMOVE comments it back out. A foreign Origin, a foreign Host, a proxy header
and a sibling container on the same network are each refused. `npm run doctor`,
`npm test` (5067 passed, 1 skipped, 0 failed) and `npm run build` are green
inside the container.
Reported-by: @jklaze
Co-Authored-By: Bogdan Petrut <[email protected]>
Co-Authored-By: Claude Opus 5 <[email protected]>
Vite's dev server is the whole app here — it serves the client and runs every
API proxy as middleware — so one container running `npm run dev` covers it, and
HOST/PORT are already env-driven.
Three details are deliberate:
- The port publishes to 127.0.0.1. Docker's usual "4173:4173" binds every host
interface, which would silently make the README's LAN warning the default for
a server that brokers configured provider keys.
- The repo is bind-mounted, so keys saved from Provider Settings, .gev-cache
and .gev-logs persist on the host exactly as they do under `npm run dev`.
node_modules stays in the image so a host install cannot shadow the
Linux-built native deps.
- The container runs as the host user, since everything it writes lands in
that bind mount. Vite's dep optimizer still needs to write inside the image's
node_modules, hence the two loosened directories.
Puppeteer's Chromium download is skipped: it is only needed by `npm run
test:track`, which the README points at the host.
Co-Authored-By: Claude Opus 5 <[email protected]>
Resolve the source-pack conflicts with Statens vegvesen (keep both packs).
The Norway pack's 900 default pushed the per-pack defaults to 5,204, past
the 4,500 catalog cap this PR enforces, so raise DEFAULT_CCTV_MAX_SOURCES
to 5,500 and CCTV_MAX_SOURCES_CEILING to 6,000.
- OPEN STREET VIEW in the PROVIDERS row opens Street View's nearest
panorama at the ground under the middle of the screen, without moving
the camera: Street View no longer needs a pointer. It is disabled (and
says so) until the camera is at street zoom.
- Off the Google 3D map Street View does not appear at all: no chip,
legend swatch, globe credit, layer source or button, and Google's script
is not loaded (the viewer has no prewarm; the script loads on first use).
The share option keeps the user's choice for when Google 3D returns.
- A ground click measures the camera height at the click rather than
reading the cached flag.
- A chip without a usable key explains it instead of lighting; it darkens
beside a lit chip, and the other chips keep switching, so a refused
Street View key cannot lock Mapillary out.
- The gate checks that nothing of Street View shows off Google 3D even when
a share link switches it on, presses OPEN STREET VIEW on Google 3D, and
asserts that each chip it switches really switched.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Google's Maps Platform terms forbid Street View imagery beside non-Google
maps, so the provider declares requiresMapStack: 'photoreal': off Google
3D its chip is dashed with the reason, lookups and opens skip it, and
leaving Google 3D closes its panorama.
- Ground clicks: only a click on the map itself (scenePick.isSurfacePick:
nothing picked or Google 3D tile content) at street zoom opens Street
View, and the camera stays put; higher up the hint says to zoom in.
scenePick.pickGroundPosition replaces the copy in Directions.
- Viewer: poses go out at once and again when the date and address
arrive, so an open never hangs on that lookup; one lookup per panorama,
seeded by the nearest lookup; a close settles a pending open; failed
lookups are asked again; poses follow position changes, not pano_changed.
- Loader: the gm_authFailure handler is installed once, so a retried load
reports a refusal once.
- Viewer host: a prewarm that lands after another provider took the host
is released; FIT/FILL availability is set on every open.
- Provider: a refusal while switched off reports no error over another
photo; SINCE compares against the end of Google's month; messages name
the referrer and network causes; FLAT says Street View is 360° only.
- The layer row names the key of the providers that are on; the MCP panel
CSP admits Street View's tiles, control images and photos.
- Tests for each, against fakes that now follow Google's event order; the
browser gate restores its state, waits instead of sleeping, aims its
panel clicks and corner drags, and asserts the camera stays put.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Google Street View registers beside Mapillary as provider `google`. It runs
on the Maps JavaScript API with the browser GOOGLE_MAPS_API_KEY, loaded on
first use (mapsLoader.js), and uses Google's own StreetViewPanorama as its
viewer adapter, emitting provider-neutral poses (address and month in the
caption, a link to Google Maps, steps along Google's arrows, FOLLOW on
Google 3D). Its chip starts off because every panorama is billed to the
key; the share option is `g`.
Google offers no coverage layer for other maps, so the provider draws
none: with it on, a click on bare ground at street zoom opens its nearest
Google-collected outdoor panorama (groundClick.js). A key Google refuses
reads KEY REJECTED and fails a pending open at once; a lookup Google never
answers fails after 10 s.
Core: providers may declare `groundClick` and `defaultOn`; poses may carry
`capturedAtPrecision` and `title`; the coverage line keeps every
provider's hint; opening one provider's image releases another's
prewarmed viewer; FIT/FILL hides for viewers without render modes. CSP
script-src admits https://maps.googleapis.com. The browser gate gains two
Street View steps (the keyed one skips as 'no Google key' in CI).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The browser gate is one pass over the remaining flows: rail strip and
expand, coverage with fixtures, the ON/OFF pill, 360° and SINCE filters,
KEY REJECTED, nearest photo with caption, × close, phone fit, keyless
KEY REQUIRED on a second page and no page errors. Panel controls are
pressed through the DOM; pick-point search, line/cone clicks, the
framing-cancel, reload/share and status-route probes, the second
viewport and pointer-settling retries are gone (unit tests cover them).
Tests that pinned constants, copy, CSS or source text, or repeated
another test, are removed or merged. CSS loses an unused variable and
duplicate rules. Docs describe the slimmed feature; unused exports and
the layer's dead setCoverageFilter/refreshCoverage surface are removed.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The layer now owns its Mapillary parts directly: the provider registry,
pick router, multi-provider UI summary, params codec helper and provider
context are gone. createStreetLevelLayer({ source }) builds coverage,
sequences, the nearest-image lookup and the MapillaryJS viewer itself; a
single providerOn switch keeps the share link's `mapillary` option (off
draws nothing), and getParams/setParams keep { mapillary, pano, sinceDays }.
No z0-5 overview points: above 60 km nothing is drawn and the panel says to
zoom in; the proxy now serves only coverage z11-14. Tiles come from the
visible ground within range of the camera, ranked from the ground under it
(no line-of-sight ranking or near-range padding). MapillaryJS loads on the
first photo; viewer prewarm is removed. Key status, a rejected key and a
rate limit share one `blocked` state on coverage.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
EXPAND now uses the browser's Fullscreen API on the viewer element, which
stays in the panel; the hand-built modal (re-parenting to <body>, inert
siblings, focus trap, document-level Esc/Tab, Clean View/recording/cockpit
hide rules) is gone. The button is hidden where the API is missing.
The FOLLOW button and the PROVIDERS chip row are removed. The header pill is
the only layer switch and re-enables a provider switched off elsewhere; under
KEY REQUIRED the error line says which key to add. Chip colour support in
chipGroup, dead CSS and tests pinning the removed behaviour go with them.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
PR #768 bundled a portable-panel windowing system with the Street Level
layer. Remove it so CCTV and Street Level are ordinary docked right-rail
panels again, as on main before the merge.
Removed:
- header drag to float, 8-way edge/corner resize, double-press snap-back,
dockOnCollapse, command-dock clearance, float hint toast, floating z floor,
persisted floating geometry and ResizeObserver re-clamping
(panelPositionControls.js restored to its pre-#768 version)
- src/ui/panelResize.js and its tests, panelDock.test.mjs
- onPanelResized/dockPanel wiring in PanelChrome, the application shell and
StreetLevelControls (EXPAND/SHRINK no longer docks)
- :not(.panel-floating) guards and .panel-floating/.panel-portable/resize CSS
- qa:panel-resize, qa-panel-resize.mjs, qa-panelDrag.mjs, their tests, the
CI "Portable panel gate" step, QA_FAIL_ON_RETRY, and the Street Level
gate's float/resize/dock steps
- floating-panel docs in README, CHANGELOG, CURRENT-STATE, KNOWN-ISSUES
Kept: the Street Level panel as a docked rail panel (share/cockpit/rail
lists, layout controller, rail and Cyber CSS, EXPAND viewer), and the
independent right-rail alignment fix (settledLeftRailTop, 9dde7b4).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Trim the doc text this PR adds (README, CHANGELOG, CURRENT-STATE,
KNOWN-ISSUES, SECURITY, DATA_SOURCES, .env.example, the CI job comment),
drop code comments that restate the code, cut design-note JSDoc to a line
or two, and drop review tags from test names. Comments only; no code
changes.
Also: README key count (seven keys, two metered), CURRENT-STATE's gate
paragraph (CI runs a production build with a dummy token), the stacked
doc above meshBoxInRange and the orphaned inMeshRange line in
coverage.js, and a duplicate ALPR row in DATA_SOURCES that a merge had
brought back.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Address review feedback on #903: the DATA_SOURCES terms link now points
at the actual terms page instead of a sign-in page, key-creation links
go straight to my.tomtom.com/keys, and the README table row is realigned.
Co-Authored-By: Claude Sonnet 5.5 <[email protected]>
- Lower the Vegvesen default cap to 900, still above the ~850 working
cameras, so the per-pack defaults stay closer to the catalog default.
- Name the flat ground-elevation prior as a known limitation: the feed
is 2D, and mountain-pass cameras can sit below terrain where neither
the point-height prior nor the ground snap resolves.
- README: ~3,900 public cameras.
- Use one HLS figure (~135 working) in CHANGELOG and DATA_SOURCES.
- DATA_SOURCES: list the frame and HLS hosts alongside the catalog host.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Norway's ~850 working road cameras load from one keyless GeoJSON request
to the agency's OGC API view of its DATEX 3.1 CCTV table, so no DATEX
account is needed. Faulty cameras are dropped, every camera sits under a
"Norway" category, and the ~135 that publish HLS play as live video
through the existing in-memory relay with the still as fallback. Frames
and manifests are pinned to each camera's own path on the agency hosts.
CCTV_VEGVESEN_ENABLED=0 disables the pack, CCTV_VEGVESEN_MAX_SOURCES
caps it (nearest the largest cities first) and CCTV_VEGVESEN_VIDEO=0
keeps stills only. Attributed under NLOD 2.0.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Brings in 123 commits from main, including the v0.2.0 and v0.2.1 releases
(MCP server and tool catalog, server security hardening, build hygiene).
Conflicts:
- package.json: kept main's script order and added this PR's
qa:panel-resize and qa:street-level; exports keep both sides (main's
tools/view entries and this PR's street-level and Mapillary entries).
- src/tooling/viteBuild.test.mjs: kept this PR's Mapillary-token define
assertion and main's new wildcard-host allowedHosts assertions.
- CHANGELOG.md: main now has release sections; this PR's entries go under
[Unreleased].
Checks after the merge: doctor, format:check, check:boundaries,
layer-token:check (28 published, 1 new: street-level 0), npm test (5726
pass), build, the Windows job's focused tests (70 pass), qa:panel-resize,
and the keyless street-level gate. The new CSP allows Mapillary (https:
connect/img, blob workers). The keyed gate stops at coverage locally
because the dev .env Mapillary token is invalid (upstream 403), not because
of the merge.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
