A mutation review (91, then 130 mutants) found tests that could not fail
(quick presses with synchronous fakes, a no-flight check with a provider
that never posed), and untested paths. New and rewritten tests kill 123 of
130 mutants; the 7 survivors are equivalent or harmless redraws.
- viewer: held-back loads for quick presses, stale sharp/flat loads,
close mid-load, ends checks for an older photo, WebGL retried per mount,
focus handed back, look direction kept on ›.
- provider: id-ordered pages with out-of-order indexes, page and probe
failures retried, overtaken lookups, cones re-centred on ‹ ›, leftover
imagery filters hide no line or cone, coverage hints, tile cache.
- source: 429 backoff and Retry-After under mock timers, hang timeouts,
the nearest query's parameters. policy: storage-host injection, FOV 360,
longitudes past ±180. panorama: a stub WebGL context (angles, lost
context, re-measuring). lineCoverage.test.mjs: tooHigh hint, passes().
- core: openImage({frame:false}) and openNearest leave the camera
(with a posing provider and a default-open control), KartaView's legend
and wording end to end; viewerHost supportsRenderModes.
- Fixed tick-count waits replaced by an until() poll.
- Browser gate fixture: odd photos archived (409 at storage2, served by
the proxy), the first lookup rate-limited (429, Retry-After: 0); the
line-click step asserts the camera stays and › skips the archived photo.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The fixture gate answers api.kartaview.org, cdn.kartaview.org and
*.openstreetcam.org from fixtures (a drive with a 360° photo, stored on
storage2 while the API names storage1) and adds three steps: keyless
coverage with its credit and hidden filters, a line click opening the
nearest photo with cones and ›, and a 360° photo on the panorama without
FIT / FILL. The Street View share-link check reads the switch field instead
of one exact entry, since a chip click records every provider's switch.
README, DATA_SOURCES, CHANGELOG and CURRENT-STATE describe KartaView.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Coverage lines from KartaView's z13-14 JSON tiles (OSM ways with photos,
chained end to start), the photo nearest a clicked line, cones along its
sequence, and a viewer for flat photos and 360° panoramas (a small WebGL
equirectangular renderer, no new dependency) with ‹ › along the sequence.
Mapillary's camera-driven line coverage and sequence cones move to the
provider-neutral core (lineCoverage.js, sequenceCones.js) with the tile
fetch, zoom ladder, colours and pick prefixes injected; Mapillary keeps
thin wrappers and its tests pass unchanged.
KartaView quirks handled: api.kartaview.org (the documented
api.openstreetcam.org serves empty tiles), photo URLs that name storage1
for photos stored elsewhere, and a photo API that answers 429 to more than
about three requests at once (two in flight, retried with backoff).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Register the keyless webcams.nyctmc.org catalog as a live CCTV source,
synthesize frame URLs from validated camera UUIDs, and keep the nearest
cameras to the five borough cores under the existing catalog ceiling.
Retain upstream changes to the panel controller, formatting scope, changelog and docs. Preserve the #804 ownership fix and its rail restoration regression (original report: @raysung-2026).
Conflicts with upstream's Street Level provider composition and share-state
codec, resolved:
- Street View's switch moves from its own share option (`g`) to upstream's
provider-switch field (`r`, e.g. `0.r.google-1`); a link without it keeps
Street View off. Docs and the browser gate follow.
- createApplicationStreetLevel keeps upstream's injectable provider list;
its default, once the application supplies its Street Level source, is
Mapillary plus Google Street View. Without that source there are none, as
upstream intends.
- The coverage hint keeps upstream's empty-composition message and joins
every switched-on provider's hint otherwise.
- CHANGELOG, README and SECURITY keep both sides' entries.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Google's Maps Platform terms forbid Street View imagery beside non-Google
maps, so the provider declares requiresMapStack: 'photoreal': off Google
3D its chip is dashed with the reason, lookups and opens skip it, and
leaving Google 3D closes its panorama.
- Ground clicks: only a click on the map itself (scenePick.isSurfacePick:
nothing picked or Google 3D tile content) at street zoom opens Street
View, and the camera stays put; higher up the hint says to zoom in.
scenePick.pickGroundPosition replaces the copy in Directions.
- Viewer: poses go out at once and again when the date and address
arrive, so an open never hangs on that lookup; one lookup per panorama,
seeded by the nearest lookup; a close settles a pending open; failed
lookups are asked again; poses follow position changes, not pano_changed.
- Loader: the gm_authFailure handler is installed once, so a retried load
reports a refusal once.
- Viewer host: a prewarm that lands after another provider took the host
is released; FIT/FILL availability is set on every open.
- Provider: a refusal while switched off reports no error over another
photo; SINCE compares against the end of Google's month; messages name
the referrer and network causes; FLAT says Street View is 360° only.
- The layer row names the key of the providers that are on; the MCP panel
CSP admits Street View's tiles, control images and photos.
- Tests for each, against fakes that now follow Google's event order; the
browser gate restores its state, waits instead of sleeping, aims its
panel clicks and corner drags, and asserts the camera stays put.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Google Street View registers beside Mapillary as provider `google`. It runs
on the Maps JavaScript API with the browser GOOGLE_MAPS_API_KEY, loaded on
first use (mapsLoader.js), and uses Google's own StreetViewPanorama as its
viewer adapter, emitting provider-neutral poses (address and month in the
caption, a link to Google Maps, steps along Google's arrows, FOLLOW on
Google 3D). Its chip starts off because every panorama is billed to the
key; the share option is `g`.
Google offers no coverage layer for other maps, so the provider draws
none: with it on, a click on bare ground at street zoom opens its nearest
Google-collected outdoor panorama (groundClick.js). A key Google refuses
reads KEY REJECTED and fails a pending open at once; a lookup Google never
answers fails after 10 s.
Core: providers may declare `groundClick` and `defaultOn`; poses may carry
`capturedAtPrecision` and `title`; the coverage line keeps every
provider's hint; opening one provider's image releases another's
prewarmed viewer; FIT/FILL hides for viewers without render modes. CSP
script-src admits https://maps.googleapis.com. The browser gate gains two
Street View steps (the keyed one skips as 'no Google key' in CI).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Fixesbilawalsidhu/gods-eye-view#927. Each stdio MCP server made its own
random panel key, and panel_request accepts only the key in the panel
page. A client that starts two server processes for one connection and
reads the page from one while sending the page's requests to the other
(seen in Claude Desktop on Windows) therefore always got "Only the God's
Eye View panel may make this request".
The stdio entry now passes a key shared by the install, created once in
.gev-cache/mcp-panel-key. The file is staged 0600 and published with
link(), so processes starting together agree on one key and never read a
half-written one. If it cannot be stored, the process keeps a key of its
own, as before. createLocalMcpServer still makes a fresh key unless given
one, so in-process servers (the /mcp HTTP plugin, tests) are unchanged.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- The CI gate builds the app and serves it with `vite preview`, with a
dummy non-secret client token (a fork PR never gets secrets), and
answers the Graph API, image tiles and thumbnails from fixtures: 41
photos on a line under the parked camera and one generated 640x320 JPEG
(scripts/fixtures/street-level). All 7 photo steps now run in CI, plus a
real click on a coverage line and on a cone, the framing flight stopping
on close, the inert modal, the viewer returning into the panel, and a
reload keeping a collapsed panel collapsed (share ui token t).
- Fixture interception is limited to Mapillary hosts via CDP
Fetch.enable: page-wide request interception stalled Cesium's workers,
so the old fixture mode never drew anything on the globe.
- Failure evidence (screenshots, UI state, console, failed requests,
render errors) is written to qa-artifacts/ with keys and tokens redacted
and uploaded on failure; qa-artifacts/ is gitignored.
- Cesium render-loop errors fail the gate; Google 3D branches that cannot
run print as skips, and --strict rejects any other skip.
- Panel presses log their diagnostics, warn on a retry, and CI now fails
on any retry (QA_FAIL_ON_RETRY=1) since the rail settles; a press with
no pointerdown is a failure, not a retry.
- Assertion-gating sleeps 27 -> 1; the rejected-key "no requests" check
has a positive control.
Verified locally: strict fixture gate on the production build 28 ok + 2
"no Google 3D" skips (twice, fail-on-retry on); panel gate 5/5 plus no
render errors; live gate with a real token 25 ok + 3 fixture-only skips.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
From the IC8 review of #768, each with tests that fail before:
- P2: the expanded viewer is a real modal: while it is on screen every
other <body> child is inert (only the ones it set are restored, on
shrink, close and destroy, and when Clean View/recording/cockpit hide
it). The voice pill and toasts are not clickable while it is expanded.
- P2: the tile proxy follows redirects by hand, at most 3 hops, each one
HTTPS on exactly https://tiles.mapillary.com without credentials;
anything else is a 502 and the token never leaves that origin.
- P2: the real dev and preview server smoke tests request
/api/mapillary/status and a tile, and the browser gate first checks the
server's real status route before any interception, so CI fails if the
Mapillary plugin is not registered.
- P2: both gates press panel headers through one shared helper
(scripts/qa-panelDrag.mjs): re-resolve the header until it is under the
pointer, record what the press hit, wait on the real floating/docked
state, and retry only a press that provably missed the header.
Verified: unit 5910 pass; fixture gate 17/17; panel gate 5/5; live gate
with a real Mapillary token 22/22.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A duplicate scan of every module the PR adds (repeated 4-line blocks,
normalised) after gekh's dedup round left these:
- glyphs.js: the cone, ring and position glyphs share cachedGlyph(), wedge(),
ring() and dot(). Checked with a recording canvas: all 20 draw calls keep
the same path and fill/stroke state, so the glyphs are pixel-identical.
- panelPositionControls.js: one placeAt() for the three places that pin a
panel's top-left corner as a fixed window.
- tiles.js: one warn() for the three background-failure logs.
- Tests: src/testSupport/streetLevelFakes.mjs holds the provider snapshot
(uiState + presentation tests), the stand-in provider (core + controls
tests) and one real-ray pinhole camera (view + coverage tests, which had
each written their own). The coverage line-of-sight test still fails when
refresh() stops passing its focus.
- qa-street-level.mjs: one waitForCoverage() for the five copies of the
"on, drawn, settled, not key-gated" wait.
No behaviour change: unit 5862 pass, fixture gate 16/16, panel gate 5/5.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
From gekh's review of #768, each bug with a test that fails before:
- P2: a failed sequence load clears the previous sequence's cones, resets
the selection and can be retried; a second click while loading starts no
second lookup. sequences.js had no tests: sequences.test.mjs now covers
failure and retry, a superseded late answer, the cache and clearSelection.
- P2: closing a photo stops MapillaryJS sequence playback, which kept the
hidden viewer stepping and downloading images.
- openNearest without the panel reports it instead of loading forever, and
stops if the layer (or its provider) went off during the lookup; the
mesh sampler's misses are bounded and forgotten with its samples; the
sequence count is the union of ids across tiles; a provider withdraws
only its own error, so a sequence error cannot mask KEY REJECTED; hover
stays on (throttled) under an orbiting camera and re-picks when it
stops; "since N days" follows the clock in a long-open tab.
- A prewarm waits for one in flight and then builds if it gave up.
- New coverage for the layer core (credits, KEY REJECTED vs REQUIRED,
switching a provider off), the refresh wiring of the tilted-view fix and
the draped-to-cast swap completion.
- Cleanup: loading is derived from pending; freshStreet(); tile ranking
computes distances once and shares one path for the date line; shared
metresBetween / whenIdle / redrawTile; one NEAREST_RADIUS_M and one
source method list; unused contract fields, exports, getImage and the
decoder's image branch removed; PROVIDER_COLORS lists only Mapillary.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
From the IC8 review of #768 (P2s), each with a test that fails before:
- Switching the layer off and on during the first photo download no longer
leaves the viewer stuck on "not mounted": an outdated mount only unmounts
an adapter nobody else holds and subscribes poses only once current, and
the MapillaryJS adapter never builds a viewer after it was unmounted.
- Hover picks at most every 120 ms (the CCTV convention), not while the
camera moves or a button is held, and not after the layer went off.
- Esc shrinks the expanded viewer wherever focus is (document capture), so
the map keeps its selection, and Tab from outside returns into it.
Closing a photo moves focus to the panel instead of dropping it on body.
- Portable panels lift only after a mouse or pen moves past the drag
threshold: a click on a docked panel's edge or a touch swipe on its
header no longer turns it into a floating window, and pointercancel
saves nothing and puts the panel back.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
From the test-engineering review of #768: the rendering and panel code had
thin unit coverage (coverage.js 29% of lines, sequences/viewer/selection
~30%, cameraFollow 50%, streetLevelControls only source-text checks), and
two shipped bugs were caught only by the manual browser gate.
- coverage.test.mjs drives the real createCoverage against a fake scene and
a source whose tile requests the test resolves. It reproduces gekh's P0 #2:
a request superseded by retire() finishes after a newer one for the same
tile. Without the ownership checks it drops the newer request's key and a
refresh starts a duplicate whose lines nothing can remove (fails on the old
loadTile, passes now). It also covers the draped-to-cast swap keeping both
line sets on the globe until the cast one is built and clear() removing
both mid-swap, and a tile with nothing castable not being rebuilt.
- coverageFixture.mjs encodes Mapillary-shaped coverage tiles (sequence
lines, overview points) from lon/lat; the tests and the hermetic gate use it.
- cameraFollow.test.mjs pins the underground-camera fix: a -14,886 m sample
is ignored for bare earth, a plausible sample wins, and following stands at
eye height. Three of the four fail on the pre-fix module (the first reports
"centre at -14884 m").
- streetLevelControls.test.mjs is a contract test through the real
DataLayerManager and LayerStateCoordinator: a 360 deg click and a SINCE
release reach the durable layer state and the encoded share link under
Street Level's token. Against a stand-in layer it also covers the chip rule
(darkening the last lit chip turns the layer off, provider kept on; lighting
a dark chip is a user params request, then enable), the legend rebuilding
on a same-count swap (review #9) and the viewer resizing only on open
(review #8). With the old direct-to-layer routing, three of these fail,
including both share-link tests.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Norway's ~850 working road cameras load from one keyless GeoJSON request
to the agency's OGC API view of its DATEX 3.1 CCTV table, so no DATEX
account is needed. Faulty cameras are dropped, every camera sits under a
"Norway" category, and the ~135 that publish HLS play as live video
through the existing in-memory relay with the still as fallback. Frames
and manifests are pinned to each camera's own path on the agency hosts.
CCTV_VEGVESEN_ENABLED=0 disables the pack, CCTV_VEGVESEN_MAX_SOURCES
caps it (nearest the largest cities first) and CCTV_VEGVESEN_VIDEO=0
keeps stills only. Attributed under NLOD 2.0.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Brings in 123 commits from main, including the v0.2.0 and v0.2.1 releases
(MCP server and tool catalog, server security hardening, build hygiene).
Conflicts:
- package.json: kept main's script order and added this PR's
qa:panel-resize and qa:street-level; exports keep both sides (main's
tools/view entries and this PR's street-level and Mapillary entries).
- src/tooling/viteBuild.test.mjs: kept this PR's Mapillary-token define
assertion and main's new wildcard-host allowedHosts assertions.
- CHANGELOG.md: main now has release sections; this PR's entries go under
[Unreleased].
Checks after the merge: doctor, format:check, check:boundaries,
layer-token:check (28 published, 1 new: street-level 0), npm test (5726
pass), build, the Windows job's focused tests (70 pass), qa:panel-resize,
and the keyless street-level gate. The new CSP allows Mapillary (https:
connect/img, blob workers). The keyed gate stops at coverage locally
because the dev .env Mapillary token is invalid (upstream 403), not because
of the merge.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Binding HOST=0.0.0.0 no longer sets Vite's allowedHosts to true. The dev and
preview servers accept IP addresses, localhost and the LAN hostnames listed
in GEV_ALLOWED_HOSTS; suffix and wildcard entries are ignored. The
configuration factory takes the resolved list as an input, so build/vite.js
still reads no environment.
Ported from #97 to the current build/vite.js layout. Fixes#21.
Co-authored-by: Sameh Khamis <[email protected]>
Co-Authored-By: Claude Opus 5.5 (1M context) <[email protected]>
The OpenAI endpoints (/api/realtime/token, /api/openai/hud-summary) now
allow 30 requests per minute per client IP and the Google Places endpoints
120, the caps the Pinokio build already ships. GEV_RATELIMIT_OPENAI_PER_MIN
and GEV_RATELIMIT_GOOGLE_PER_MIN still override them and exactly 0 disables
them; an unreadable value falls back to the default rather than to
unlimited.
Salvaged from #683 onto current main.
Co-authored-by: Sameh Khamis <[email protected]>
Co-Authored-By: Claude Opus 5.5 (1M context) <[email protected]>
The cost-bearing endpoints (/api/realtime/token, /api/openai/hud-summary,
/api/google/nearby-places) and the voice debug log refuse cross-site browser
requests: a foreign or opaque Origin, a Sec-Fetch-Site other than
same-origin/none, or proxy forwarding headers. Loopback tools without an
Origin and the LAN opt-in keep working. The dev and preview servers send one
shared Content-Security-Policy, and embed-mode framing rewrites only the
frame-ancestors directive of it.
Salvaged from #242 onto current main.
Co-authored-by: Sameh Khamis <[email protected]>
Co-Authored-By: Claude Opus 5.5 (1M context) <[email protected]>
show_on_globe replaces open_in_gods_eye_view and names an MCP Apps view, a
ui:// panel that loads the app in embed mode and posts each later view to it,
so the globe in the conversation changes without reloading. It also takes a
view another answer returned. Tools can declare a UI resource, and the MCP
adapter serves resources/list and resources/read and lists each tool's
resource in _meta.ui.resourceUri.
?embed=1 shows the globe alone: clean view with the HUD, panels, welcome and
setup prompts hidden, and provider attribution kept. The page that frames it
sends views with postMessage; the app applies each through its own actions
and reports every step. Annotations in any link are drawn once it restores.
Only embed-mode documents may be framed; every other page keeps
X-Frame-Options DENY and frame-ancestors 'none', and
GEV_EMBED_FRAME_ANCESTORS can restrict who frames them.
Tool answers with something to show now include data.view: the view with
the matching layers on, the area framed from above or a single aircraft or
satellite followed, and the link that opens it. Area framing moves to
src/tools/views.js so links and answers frame alike.
A view is a camera, data layers, visual style, map imagery and an aircraft,
military aircraft or satellite to follow, written in the share-link format
the app already restores. gods-eye-view/view builds, encodes and decodes one,
and share links take their style names from it. open_in_gods_eye_view now
builds its link from a full view: an area or camera, layers, style, map and
something to follow.
Brief sections received a named place as its bounding box, so they centered
on the box's middle: Tokyo's aircraft were sorted from a point in the
Pacific. Sections now receive the place name and resolve it like a direct
query, and place lookups are cached briefly so a brief resolves it once.
The raycast challenge on #768 showed bare-earth casting misplacing roads
that are not at grade: lines floated over freeways in trenches and steep
streets (rendered line pixels floating: Austin 8.5%, SF 27.1%, LA 43.8%),
because a ~111 m terrain grid cannot see a 30 m-wide cut or a slope between
its corners.
meshSampler.js samples the rendered Google 3D surface (scene.sampleHeight,
overlays excluded) once per ~11 m cell within 900 m of the camera, nearest
first, in idle time within a 6 ms budget; misses are retried, not latched.
groundCast.refineHeights blends it in, per point along a line:
- mesh up to 3 m above bare earth is the road: follow it, 1 m above;
- higher mesh (canopy, deck, roof): carry the road's offset from bare earth
across from the road samples on both sides (up to 8 points);
- otherwise bare earth + 2 m, as before.
Lines, cones and the marker use it; tiles touched by new samples are
redrawn one per idle slice with the no-blink swap.
Rendered line pixels on the surface / floating, before -> after:
Austin 90.0 -> 95.3% / 8.5 -> 0.7%; SF 69.0 -> 86.4% / 27.1 -> 9.1%;
LA 52.3 -> 91.0% / 43.8 -> 4.0%; Innsbruck 95.0 -> 95.7% / 0.2 -> 0.2%;
Sacramento 80.7 -> 79.3% / 3.8 -> 2.7%; buried lines stay under 1%.
Cones floating in SF 44 -> 5%, buried at LA 59 -> 28%. Main-thread long
tasks added during refinement: at most 134 ms (Austin, densest tile).
Roads on elevated decks are still drawn at ground level under the deck.
Unit tests cover the blend (trench, slope, canopy bridge, deck, bad probe),
the finer cast with meshAt, and the sampler (once per cell, nearest first,
overlays excluded, far cells skipped, misses not latched, idle when off).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
From the code review of #768:
- view.js measured the camera's height above ground with globe.getHeight,
but Google 3D hides the globe, so coverage picked its zoom from the
ellipsoidal height. Over a high city (Denver, ~1,600 m) a camera 500 m up
read 2,100 m: coverage stayed at z12/z13, whose tiles are too big to cast,
and lines stayed draped on the roofs. With the globe hidden, the bare-earth
height from the ground caster now answers; coverage re-picks its zoom when
the surface mode changes. Verified in Denver: terrain mode, z14, cast lines.
The core's surface check uses the same helper (and no longer subtracts the
2 m lift from the camera height).
- castTile rebuilt a tile even when no line could be cast (terrain proxy
down, tile too big); it now leaves such tiles as they are.
- The feature gate read Street Level's share token as a literal `0`; it now
takes it from LAYER_STATE_REGISTRY, since a rebase can reassign it.
New view.test.mjs covers the shown-globe, hidden-globe and no-sample cases.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The merge of main (c451478) appended main's new entries directly after
this branch's last entries in scripts/format-scope.json (after
streetLevel/index.test.mjs) and in two groups of
scripts/package-boundaries.json (after app/layers/streetLevel.js), without
the separating comma. Both files stopped parsing, so every CI job failed
at its first JSON read, the "Check adopted formatting" step.
With the commas back, the CI steps pass locally: doctor, format:check,
check:boundaries, layer-token:check against main, npm test (5475 pass),
build, and the Windows job's focused onboarding tests.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
src/tools/surfaces.js lists the tools a surface leaves out, and the MCP
server, the voice session's tool list and the browser catalog voice calls
all filter through it. Voice leaves out tools that answer with images, link
to the app, or repeat what its app actions already answer.
Add find_alpr_cameras over the layer's OpenStreetMap camera extracts:
cameras in a US or Canadian area of at most 3° per side, nearest first,
with operator, manufacturer and facing direction, and the source's
attribution. Areas outside coverage or too wide are reported.
Add find_submarine_cables over the bundled TeleGeography data: cables
passing through or landing in an area, or matching a name, with landing
points and the dataset's attribution. The local MCP server's fetch reads
the bundled data files a browser would load by URL, and nothing outside
that directory.
Add get_recent_imagery. It searches the recent Harmonized Landsat and
Sentinel-2 catalog for an area, picks the image the layer would show
with the layer's own ranking, and returns it with its date, sensor and
cloud cover, falling back to the VIIRS daily overview.
Add get_weather_map, which returns the latest NOAA radar, satellite or
lightning map over an area as an image, choosing a window the image
route accepts and reporting areas outside the product's coverage, and
get_wind, which samples GFS or IFS wind at a location with the wind
layer's own grid sampling.
Mount the local MCP server at /mcp on the development and preview
servers for clients that connect by URL. The route accepts only
requests from this machine that name a loopback host and, when an
Origin is sent, come from a loopback origin, and drains oversized
bodies so the 413 response is delivered. The provider-order regression
test now pins the route between the providers and the API fallback.
Add open_in_gods_eye_view. It builds a version 2 share link looking
straight down on an area, with altitude chosen from the area's size, on
the app address the application supplies.
Add vessels_in_area, find_vessel and get_vessel_track over the live
vessel source, and a ships section in situation_brief. Without an AIS
key the source's own message reaches clients as an unavailable feed.
Add get_weather, get_regional_brief, get_cyclones, get_fire_perimeters,
get_terrain_height, find_military_installations and get_map_features
over the application request services and the layers' sources.
situation_brief combines weather, earthquakes, fires, aircraft and
cyclones for an area by reusing those tools, marking sections that are
unavailable instead of failing. get_hud_caption returns the app's
heads-up display caption for the same overview.
Add get_bike_share over the public GBFS systems and get_transit_vehicles
over the GTFS-Realtime feeds. Each finds the systems or feeds whose
coverage reaches the area, reads up to three, and reports any that were
unavailable instead of failing the whole answer. Transit results carry
each feed's attribution and license.
Kevin Rajan