refreshCctvFocusStyles passes cameraColorFor as baseColorFor, but only
refreshCoverageStyles was tested. The new rendering.test.mjs runs the
focus pass through createRendering with stubbed focus services and
checks that an idle video camera fades from violet, a still from cyan
and the active camera from amber. It fails if the focus callback goes
back to the old active/idle check. Also adds the missing semicolon on
the policy.js import in cctv.test.mjs.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Pass the custom sky box to the Viewer instead of `skyBox: false`, which
also stopped CesiumWidget from creating the Sun and the Moon. Guarded by
scripts/qa-sky-sun-moon.mjs.
- Outside the IAU 2006 tables (before 1975, after ~2050) the preload
resolves without data; remember that span and stay on TEME instead of
preloading and rendering every frame.
- The anime style no longer cel-shades the far plane, where four bands
turned the faint Milky Way into blotches.
- Paint the planets out after the star-removing opening and with the
ring median, so no brighter plateau is left; faces rebuilt.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- State FL511's terms the same way everywhere: individual, personal use
only, and any other use (a public deployment included) needs FDOT's
express written consent. .env.example, README, dataCredits, the source
licence string, the catalog comment and the changelog fragment said only
"individual, non-commercial use".
- Page the ArcGIS catalog on exceededTransferLimit alone and advance the
offset by the rows each page returned, so a lower server-side max
record count no longer cuts the catalog short at the first short page.
- Order pages by OBJECTID_1 (this layer's object id; a plain OBJECTID is
rejected with HTTP 400) so offset paging is stable.
- Raise the page ceiling to 40 and warn when it is hit.
- Tests: short pages with exceededTransferLimit keep paging, orderByFields
is sent, and a service that ignores resultOffset stops at the ceiling.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
aircraft_in_area stats summarized altitude over airborne aircraft but
speed over every match, so parked aircraft pulled the mean speed toward
zero. Both figures now use the same airborne subset, and the on-ground
fixture is stationary so the test can tell the difference.
Reserved AIS ship-type codes 100 to 255 now read as unknown, as type 0
does, instead of showing up in the breakdown as their own type.
Adds tests for an area where every aircraft is on the ground and for
find_vessel type and destination normalization, and notes in the
changelog fragment that every vessel answer is now normalized.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Cesium's default Tycho-2 sky box is six 1024² JPEGs stretched 3–6× around
the whole-globe view, so space read as an over-compressed JPEG (HAL-627).
The scene now draws its own sky in the Scene#skyBox slot: the 9,096 stars
of the Yale Bright Star Catalogue as point sprites sized in CSS pixels
(magnitude → width and opacity, B−V → colour), over a soft, star-free
Milky Way cube map built from ESO/S. Brunier's panorama (CC BY 4.0). Both
layers share one ICRF→Earth-fixed rotation at the scene clock, with the
TEME rotation filling in until Cesium's IAU 2006 tables load.
Assets total 482 KB, built by scripts/build-bright-stars.mjs and
scripts/build-milky-way.mjs. Frame time and the idle render governor are
unchanged.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
AIS sends ship types as ITU-R M.1371 codes, so vessels_in_area grouped
"70", "74" and "79" as three types, and type: "tanker" matched nothing on
feeds that send codes. Codes now read as the family the vessel cards already
show (CARGO, TANKER, TUG), for rows, group_by and the type filter. The code
table moves to src/data/vesselTypes.js, which has no i18n import, so the
server-side tools can use it; vesselLabels re-exports it.
A destination with no letters ("0", "---") now counts as unknown.
Live, Singapore: "most by type: CARGO (3), TANKER (3), PASSENGER (1)"; "how
many tankers near Singapore" found 3.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- dataCredits `gbfs`: names the seven PBSC operators, with BiciMAD's
required "Powered by EMT de Madrid" linking to emtmadrid.es.
- dataCredits `jcdecaux-gbfs`: adds Valenbisi and Sevici.
- DATA_SOURCES.md: a BiciMAD row (Madrid's open-data catalogue publishes
the feed under EMT's terms, attribution required), one row for the other
six PBSC feeds (no licence published; attribution to the operator), and
the JCDecaux row widened to Valencia and Seville.
- CURRENT-STATE.md: the Bikeshare row, and the underscore and
geofenced-capacity rules in "GBFS upstream bounds".
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The flights records and the mesh-floor sampler kept identical copies of the equirectangular distance; both now import src/data/approxDistance.js. The changelog entry moves to changelog.d (#787), and CURRENT-STATE notes the antimeridian behaviour.
- i18n scanner: lastError sink, no false sinks on defaults and ternaries
- shared src/i18n/marker.js for modules that only mark strings
- wind field messages move to wind/fields.js; CITY_POIS imports from cityPois.js
- drop review IDs, change history and stale references from comments and docs
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Status pieces translate in one place (src/ui/statusText.js): a Local
ADS-B error with a single piece now translates, and the analyst card
splits empty-layer notes into pieces (Transit, Local ADS-B).
- Translate the ALPR retry chip text, the ECCC error on the Air quality
card, "Upstream response too large" and the "entry {n}" feed label.
- The unmarked-text check also sees error/loadingLabel/statusMessage/
status assignments, `status:` properties and showToast?.( /
this._showToast( calls; the scene import preview marks its pack
statuses, data and model-facing text carry i18n-ignore with a reason.
- Tests check the real code: the HUD locality formatter moves to
src/hudLocalityFormat.js, the unsaved-keys test pins the teardown.
- One copy each: city names come from src/cityPois.js, the GNSS HTTP
template and wind "field unavailable" texts; dead fallbacks removed.
- Leftovers of the reverted vessel-label change and the reformatting of
detectionHost.test.mjs / keySetup.test.mjs are back to main.
Catalogs: es/ru 2617 messages each, complete.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The vessels layer hid the detection callout for every vessel whose card
it published to the world overlay. The overlay paints only part of the
published cards (shared budget, collisions, UI chrome), so vessels whose
card was dropped lost all their text: with 60 vessels and Detection on,
21 showed only an arrow. Back to main's behaviour: the callout always
draws. Hiding it only under a painted card is HAL-628.
The translated speed unit in the callout stays.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The flights ground-floor pipeline subtracted longitudes without wrapping.
approxDistanceKm, and its copy in the mesh-floor sampler, measured two
points 0.2° apart either side of 180° (21 km at Fiji) as about 38,000 km,
so low and grounded aircraft just across the line from the viewer were
never floored or mesh-sampled. corridorFloorCells walked a segment across
180° the long way round, filling its cell budget with ground behind the
contact and never requesting the cells it was about to cross, and
stickyFloorCell dropped its hysteresis for a contact on the seam. Each now
takes the short way round, and corridor points are normalised back into
[-180, 180].
SEARCH NEARBY SITES centred its Google Places search on the mean of west
and east, which for a view across 180° (west > east) is longitude 0, and
sized the radius from the view's height alone. It now measures the view's
width through 180° and searches its real centre.
Conflicts:
- CCTV HUD: main's datasheet FOV, capability range and spec summary,
with their labels translated; specFovCapabilityToken takes a format
so the HUD can pass a translated one. Datasheet resolution labels are
camera data (i18n-ignore).
- Transit: main's route labels and operator mode words, with the
generic words still translated; an operator's own word stays a name.
Catalogs: es/ru 2566 messages each, complete.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Bicing (543 stations, PBSC) and AMBici (237 e-bike stations across the
metropolitan area, nextbike) join the GBFS registry from the operators'
keyless GBFS 2.3 feeds, both listed in MobilityData's systems catalogue.
- gbfs.nextbike.net joins the proxy allowlist as an exact host.
- Credits, DATA_SOURCES, CURRENT-STATE and CHANGELOG updated; a test pins
each system's proxy reachability and the range check for its outermost
stations.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Replacement buses on 5xx streetcar routes were drawn as streetcars, and
Flexity streetcars reporting no route were drawn as buses. A feed can now
supply vehicleMode(id); TTC maps 4400-4699 to streetcars and every other
fleet number to buses, falling back to the route otherwise.
The seven feeds publish no licence, operator or attribution fields, so DATA_SOURCES records that and credits the operator. Adds a registry test per city: allowed host and path, provider, and activation over its outermost live station.
Number() reads null, blank strings and booleans as 0 (or 1), and
/api/cctv/sources sends an unknown number as JSON null. A source-pack
camera that left out its pose therefore reached the browser as zeros
clamped to each field's floor (north, pitch -2, FOV 20, range 120 m,
mount 6 m, ground 0 m) instead of taking the defaults, and a null or
blank position put the camera at 0,0.
toFiniteNumber (server) and safeNumber (browser) now return the fallback
for absent, blank and boolean values, as validateBox already does for
Recent Imagery. The same conversion fixes the per-pack paths: a Tallinn
row with a null heading no longer reads as a high-confidence north-facing
camera, a Caltrans camera with a blank elevation keeps its 150 m ground
prior, and TfL or Catalonia cameras with a null or blank coordinate are
dropped instead of kept at 0,0 or on the zero meridian.
Not one of HSR's 80 route ids equals the number on the bus. Hamilton was
registered without a routeLabel, so every vehicle in the city read as
"Route 5783" where a rider would say 5 DELAWARE — 228 of them in an
afternoon sample. The mechanism to fix it already existed and simply was
never pointed at this feed.
Two details the table cannot skip:
Hamilton runs two generations of route id at once. `5688` and `5780` are
both the 2 BARTON, and both arrive in the live feed, so both are listed.
That is why 80 ids collapse to 46 distinct routes.
The seasonal and event shuttles publish a name where the local routes
publish a number — TC230, PEACH, ROCKTON. Those are already what a rider
would say, so they survive as published rather than being forced into a
number they do not have. Numbers are unpadded to match the rest of the
registry: routes.txt says `02`, a rider says 2.
Ids and names are from the City's own published GTFS routes.txt, which
sits under the same open-data licence as the realtime feed. Checked
against the live feed: all 30 route ids in service translate, none fall
through.
YRT encodes a branch as a two-digit suffix on the base route id. The Viva
table already depended on that scheme — `60102` is Viva Blue's B branch —
but local routes were passed through whole, on the reasoning that a YRT
route id is already the number on the bus. For a plain route it is. For a
branch it is not: a rider watching route 83's B-branch bus saw "8301".
A 15:41 EDT sample of the live feed found four branch ids in service.
Three are published in York Region's GTFS `routes.txt` and are named here
from it, unpadded to match the local routes beside them (the file says
`083A`; the registry has always preferred `105` to `005`):
10702 -> 107B KEELE
8301 -> 83A TRENCH
9002 -> 90B LESLIE
The fourth, `9101`, runs in the realtime feed but appears nowhere in
`routes.txt`. The pattern all but spells "91A" and that is precisely why
it is absent: the registry translates published names, it does not infer
them. It stays opaque until York Region publishes it.
Renamed YRT_VIVA_ROUTE_NAMES to YRT_ROUTE_NAMES, since the table is no
longer only about Viva.
German Khokhlov