Commit Graph
2236 Commits
Author SHA1 Message Date
Sameh KhamisandManjunath Paparaju 8885177e2e Keep spelled-out emails, IP addresses, recovery phrases and lower-case codes from the place service
Place suggestions still sent "john(at)gmail.com", "10.0.0.1", a wallet's
recovery phrase, a passphrase run together, "license ABC1234", lower-case
codes after a code label ("otp abcdef", "cvv abc") and short phone numbers
read as an address ("Jo 12345-6789", "Mo 0171 12345"), and a phone's three
and four digits could still be searched as a place on purpose. They now stay
in the browser. Real places that only looked private are looked up again:
Akiak, Bearer Island, SSN Station, Shibuya 150-0002. A suggested house is
named in its country's order ("Hauptstraße 12"), and one without a street
keeps its number.

Co-authored-by: Manjunath Paparaju <[email protected]>
2026-11-18 16:50:46 -08:00
Sameh KhamisandManjunath Paparaju 8675ead171 Stop roster hover and focus from moving the camera while Space Missions goes off
While Space Missions was going off (its Satellites restore still running,
the panel still shown), hovering or keyboard-focusing a roster row still
scheduled the roster preview, which flew the camera to that launch with
nothing left to end it. The preview is no longer scheduled once the layer
is going off, and one already pending is dropped. Selection, focus, replay
and stepping from the Data Layers row were already refused then.

Co-authored-by: Manjunath Paparaju <[email protected]>
2026-11-18 16:37:48 -08:00
Sameh KhamisandManjunath Paparaju 9ac937af82 Let every click subscriber hear a mission-label click
A click a painted overlay handled, such as a Space Missions label, returned
before any click subscriber ran, so the layers that close their cards or let
go of their selection on a click never heard it. Now only the picking the
label replaces is skipped: subscribers still hear the click, marked as an
overlay click whose hit is the label (no draw set, no id, nothing drilled),
and the geometry beneath it is not picked.

Co-authored-by: Manjunath Paparaju <[email protected]>
2026-11-18 16:36:00 -08:00
Sameh KhamisandManjunath Paparaju ee37511332 Keep the saved Satellites state when Satellites is still busy as Space Missions turns off
When Satellites had not settled within the 30 s limit, turning Space Missions
off cleared the saved Satellites state and put the parameters back before
failing, so Satellites stayed on as Space Missions had switched it with
nothing left to retry. Now a busy Satellites layer is left untouched and the
saved state is kept, so turning Space Missions off again finishes the
restore. A Satellites action the person took still gets its parameters back.

Co-authored-by: Manjunath Paparaju <[email protected]>
2026-11-18 16:35:52 -08:00
Sameh KhamisandManjunath Paparaju 67d675c5d9 Keep the Space Missions panel out of the Cockpit and its controls out of teardown
From review:
- Voice "open the Space Missions panel" under the Cockpit opened it and
  wrote its preference; it is refused there now, as the layer's own reveal
  is. On a phone the panel's Missions sheet shows too.
- A voice "context off" switches Space Missions off only when no Context
  mode is on, entering or starting (Contacts), and it also reaches Space
  Missions while the layer is still starting.
- While the layer is going off (its Satellites restore may still run) a
  roster click, focus or replay does nothing.
- Stepping missions from the Data Layers row opens the panel, as a globe
  pick does.
- SHARE-LINK-FORMAT lists panel 11, space-missions-panel (token n).

Co-authored-by: Manjunath Paparaju <[email protected]>
2026-11-18 16:03:51 -08:00
Manjunath PaparajuandSameh Khamis 0a6fd5f43f Make Space Missions an ordinary layer with its own panel
Space Missions no longer runs as a Context mode. The launches layer owns
its Satellites dependency, including the rule that a Satellites off
asked for after Space Missions was switched on ends it (request order
decides), and a small controller connects the layer to its own panel and
store. Context no longer isolates, snapshots or restores Space Missions
or Satellites, so Contacts and Space Missions run together in either
order, and scene playback no longer exits an isolating mode. Settled by
the owner: Contacts leaves Satellites as it is, and only a person's or
voice Satellites off ends Space Missions; a scene, story, preset or
other programmatic off does not.

Turning the layer on by hand or by voice, choosing it at first run, or
picking a mission on the globe opens the Space Missions panel, and on a
phone its Missions sheet. Asking voice to open the panel while the layer
is off is refused with a reason, and voice never opens it while the
Cockpit owns the screen. With no Context mode on, a voice Context off
switches Space Missions off. A failed Satellites restore no longer cuts
the layer's teardown short. Mission labels on the globe select their
mission. The layer names a failed first index load itself, so the
Context toast no longer imports Space Missions code.

Also carries the satellites request ordering and
DataLayerManager.waitForLayerIdle, the share token for the panel, voice
panel ids, Cockpit folding the panel away and the phone tab ellipsis.
The panel shares the rail gutters and hover border of the other side
panels.

On top of the Omnibar: "open space missions panel" reaches the new
panel, and Open Context no longer answers to "missions".

Co-authored-by: Sameh Khamis <[email protected]>
2026-11-18 16:03:51 -08:00
Sameh KhamisandManjunath Paparaju ea3d543e13 Keep right-to-left credits clear of the corner row and the readout
From review, checked in headless Chromium at 1100-1920px wide, Tactical
and Minimal, left to right and right to left, with a credit line long
enough to wrap:
- Right to left with the Minimal HUD the credits stayed bottom left,
  under the language picker and Power Up: the Minimal placement's two IDs
  outweighed the right-to-left rule, which now matches it.
- Right to left from 1200px a wrapped credit line ran into the Tactical
  bottom-right readout (AIS); the readout sits 1.5rem higher there.
- The left rail no longer reads a top pin no stylesheet sets since Cyber
  went; VUE-MIGRATION no longer lists the removed cyberTheme test, and
  CURRENT-STATE notes the narrow-screen credit line that does not wrap
  (as on main).

Co-authored-by: Manjunath Paparaju <[email protected]>
2026-11-18 15:47:27 -08:00
Manjunath PaparajuandSameh Khamis d68adcea21 Remove the Cyber HUD layout and keep its sonar as a visual style
Display > HUD > Sonar now turns the sonar sweep on over Tactical or
Minimal. It is off by default, ON reveals its five sliders, and it keeps
its guards: an OFF control, the sweep only while the HUD is visible and
outside Cockpit, no animation under reduced motion, and repaint timers
re-armed only after a drawn frame that still shows contacts.

The Cyber layout, its shell skin and its Cockpit lanes are removed. Share
links, scenes, saved views and set_hud that name Cyber open Tactical with
Sonar on; links and scene shots record Tactical with Sonar under the same
code, and a restored state that names another layout turns Sonar off.
set_cyber_sonar keeps its name and works under any layout. A newer Sonar
toggle or voice setting wins over a share-link restore that lands later.

From 1200px wide the command dock and World Timeline sit 74px above the
bottom edge, as in the Omnibar layout, leaving the bottom row to the map
attribution (left) and the Power Up corner row (right). The attribution
moves to the bottom right when the page runs right to left, where the
corner row sits at the bottom left, and a long credit line wraps upward
before reaching the corner row. The Tactical bottom-right readout sits
8px above Power Up and the coordinates start level with it. The World
Timeline is narrowed to sit between the corners. Toasts keep clear of
the raised dock and the chat and voice panel height budgets subtract its
rise. Below 1200px the layout is unchanged. The left rail treats the
centered World Timeline and voice control as obstacles only where they
reach a laid-out panel.

On top of the Omnibar: sonar.css replaces cyber.css after the Omnibar
imports, the Omnibar's HUD guide step now says Layout picks Tactical or
Minimal, and the Omnibar's Tactical bottom-right readout keeps the same
8px above Power Up.

Co-authored-by: Sameh Khamis <[email protected]>
2026-11-18 15:47:27 -08:00
Sameh KhamisandManjunath Paparaju d7f10e4d2a Fix the search bar's stale errors, hidden-field shortcuts and repeated Enter
From review:
- An error goes when a chip is chosen, and a search's error shows only
  under the line it was for: a lookup that fails after the line was edited
  says nothing under the new text.
- With voice on the field is hidden: "/" and Cmd/Ctrl+K no longer focus
  it, and nothing is looked up for it.
- Without the action runner a refused or cancelled search keeps the line,
  as the plan path does (only true is success).
- Text an input method is still composing is read when it is committed.
- A held or repeated Enter does not restart the same line over its flight.
- A city chip for the city whose landmarks are open flies there instead
  of folding the landmarks.
- "villages around here" is looked up again for the current view.
- Data Layers takes the full lane only where the desktop dock is laid out,
  by the condition omnibar-dock.css uses.
- On short phones the HUD readout moves under the field it shared a row
  with.
- CURRENT-STATE says the phone gains a field and which places are kept.

Co-authored-by: Manjunath Paparaju <[email protected]>
2026-11-18 15:00:07 -08:00
Manjunath PaparajuandSameh Khamis a3f4af91f8 Add the Omnibar: one field above the footer for places, layers and commands
On desktop the dock becomes one search bar (Omnibar.vue) that shows the
rows the line-reading pipeline makes: places with nearby suggestions,
coordinates, map items, layers, commands, plans such as "go to Austin and
show flights", guided walks through the real controls, and Ask GEV for
questions. Enter runs only what the line asks for outright. The map
credits move below the bar onto the Power Up row, the voice waveform
shows in the bar while voice is on, and the dock's Location and Visual
trays are hidden in this layout. The phone layout is unchanged. Long
place names are kept out of automatic Ask GEV.

Co-authored-by: Sameh Khamis <[email protected]>
2026-11-18 15:00:06 -08:00
Sameh Khamis ec00773402 Merge branch 'main' into fleet-entry 2026-11-18 13:37:54 -08:00
Sameh Khamis e19c84bae4 Make the fleet models, their handover and the vessel sprites a public entry point 2026-11-18 13:12:13 -08:00
German Khokhlov 0fdfc3cf45 Merge branch 'main' into fix/cockpit-subject-camera-hud 2026-11-19 01:08:29 +04:00
German Khokhlov ee0440e813 Merge branch 'main' into fix/cockpit-subject-camera-hud 2026-11-19 00:28:46 +04:00
German Khokhlov c5fede952f Merge branch 'main' into fix/cockpit-ride-transit-rail 2026-11-19 00:28:44 +04:00
German Khokhlov 83081730c0 Move only the anchor's height when the floor height arrives
- The first height that replaces the entry frame's now moves only the
  anchor's height. The anchor keeps its place and its eased lift, so the
  camera no longer jumps to a corrected fix or steps back.
- A detail line is measured with the title's glyph widths. They are a
  little wide for its smaller type, so a long detail line is no longer
  clipped.
- The first aircraft update is checked in the existing test, and the copy
  is removed; test fixtures are simpler.
- Comments, the release note and CURRENT-STATE match the code.
2026-11-19 00:26:57 +04:00
German Khokhlov e8ef4d1293 Reset a train's turn point on a new playback epoch
- A clock correction starts a new epoch, and playback may first draw its
  second report. The turn point now resets on a new epoch as well as on a
  break, so a standing train no longer turns around after a correction.
- recallDirection and earlierFixes are gone: comparing each earlier report
  with the newest turned a standing train on GPS jitter. A train bound when
  its line arrives late shows no direction until it has moved 15 m.
- Tests share reportDirections, iconOf and the playback helper.
- Comments and CURRENT-STATE match the code.
2026-11-19 00:26:57 +04:00
German Khokhlov c190e662bc Stand an inertial subject on its floor once the floor arrives
- The first floor height that replaces the entry frame's height re-anchors
  the camera and resets the smoothed rise, so the subject stands on the
  floor within a second instead of hovering above it.
- A provider's thenable gets one rejection handler; frame fields and eye
  are read once each.
- A progress label's width counts the smaller detail line and full-width
  and astral glyphs.
- Tests cover the first camera update of an aircraft and a vessel, a
  double-click on a selected vessel, a tone-only Live Signals change and a
  getter that throws on its second read; repeated cases share helpers.
- Comments, the release note and CURRENT-STATE say which height the camera
  holds while it waits for the surface and how a Live Signals row keeps
  its time.
2026-11-18 20:49:21 +04:00
German Khokhlov 58afb169d1 Keep a standing train's direction through jitter and missing bearings
- GPS jitter under 15 m at a standing train no longer turns it, in reports
  and in playback; a reversal needs at least 15 m of movement.
- A standing train keeps its operator's last bearing through reports that
  leave it out.
- Playback resets its turn point at a break, so a jump to a corrected
  position is not a reversal.
- A train bound while its line is still loading takes its direction from
  the movement it already made.
- A vehicle in view that leaves a Transit hold goes on from its own clock
  instead of rewinding.
- Tests cover the 15 m boundary, the late line, the hold release and the
  icon after Transit is turned back on; duplicate jitter tests are merged.
- FOLLOW_MIN_MOVE_M is gone; comments and CURRENT-STATE match the code.
2026-11-18 20:49:15 +04:00
manjunath22466 7312280817 fix(earthquakes): address review follow-ups on click arbitration
A drifting touch tap or a cockpit-mode tap on a fire, quake or vessel card
beside an aircraft did nothing: the cards deferred to the aircraft, whose
click handler ignores such taps. Pick owners can now declare the clicks
they ignore (registerPickOwner(..., { declinesClick })); flights and
military decline a drag or a cockpit tap and CCTV declines any click that
is not clean, so a card over them keeps that tap.

Also from review:
- the selected quake's contour rings sit on the ground the disc is draped
  on, re-read through the heights service while they paint;
- a label's fly-to frames the whole disc for large quakes;
- a quake that ages out of the feed clears its selection as evicted;
- id-less quakes are named by their content, not their row;
- the Bhote Koshi trigger-record callout opens its source on a click, as
  its keyboard action does, and yields like the other cards;
- the card's place line is cut to 48 characters, its link hint shows only
  with an opener, and its accessible name carries depth, place and time; a
  link-less card's click and keyboard action fly to the quake;
- camera trace comparison scales its tolerance with the value and wraps
  heading and roll.
2026-11-18 19:19:41 +05:30
German Khokhlov 7acc917ae0 Merge branch 'main' into exp/cctv-target-navigation 2026-11-18 17:39:59 +04:00
German Khokhlov a0db300d54 docs(imagery): tighten cancellation notes and match them to the code 2026-11-18 16:39:56 +04:00
German Khokhlov ed586a40a1 Tighten the point-navigation doc comments and state note 2026-11-18 16:38:25 +04:00
German Khokhlov 6e70793f66 Merge branch 'main' into exp/cctv-target-navigation
# Conflicts:
#	docs/CURRENT-STATE.md
#	src/layers/cctv/navigation.js
2026-11-18 16:36:41 +04:00
German Khokhlov 3348e3517e Merge branch 'main' into perf/imagery-stale-thumbnail-cancellation-20260929
# Conflicts:
#	docs/CURRENT-STATE.md
2026-11-18 16:35:39 +04:00
German Khokhlov 109bb0fd4f Tidy the Cockpit subject camera and HUD fixes after review
- A provider's look, height and speed are read once, so a getter that
  answers once is not lost; a Promise in a provider's words is refused and
  its rejection handled.
- A huge heading slew rate is capped at a half turn per step instead of
  overflowing to Infinity.
- A row changed in place keeps the time it first appeared; JSDoc,
  CURRENT-STATE and the ETA test say so.
- APPLICATION.md says the app page must load the entry icon's glyph.
- Tests check that entry succeeds, the vessel bridge is entered, a floor
  takes over from the entry height (also at 0 m), and share helpers;
  the provider unit test moves to the provider tests.
- WIDE_GLYPH uses escapes; comments, the release notes and CURRENT-STATE
  match the code.
2026-11-18 15:07:20 +04:00
German Khokhlov df4d76384c Tidy the Rail and Transit ride fixes after review
- A train first seen standing takes its direction from the operator's
  course, not from a course drawn out of GPS jitter.
- Moving a hold to another vehicle releases the first one the same way as
  ending the hold.
- repaint always goes through placeSample, which hides the held vehicle and
  puts it on its current segment, so setShown is no longer exported.
- Tests cover the icon right after a hold, a segment with one known floor,
  a known floor at 0 m and selection by click after the layer comes back;
  shared helpers replace repeated setup.
- Comments, CURRENT-STATE and the release note say what the code does
  without internal figures.
2026-11-18 15:07:06 +04:00
German Khokhlov a72c0ba237 Fix tone-only signal changes, the first anchor step, row order and emoji widths
- A provider's Live Signals row now changes when only its tone does; fields
  are compared one by one instead of through a joined signature.
- The frame that first sets an inertial subject's anchor puts it on the
  subject, so the view no longer jumps ahead after waiting for the floor.
- The subject HUD drops vanished rows before it adds new ones, so
  TRACK ACQUIRED and a steady warning keep their place.
- Progress labels give astral-plane glyphs such as emoji at least main's
  width, so they are not clipped.
2026-11-18 14:32:45 +04:00
German Khokhlov ee5a6ab317 Turn a train that backs away steadily, however small each step
The direction now follows how far a train has come back from the farthest
point it reached, so a slow reversal of under 15 m per report still turns it,
while GPS jitter around one spot does not. Rail policy takes the 15 m figure
from pathBinding instead of repeating it.
2026-11-18 14:32:36 +04:00
German Khokhlov e0437cfacb Merge branch 'main' into feat/australia-transit 2026-11-18 13:52:55 +04:00
Sameh Khamis 9554d6ea71 Serve the Data Library from any server, and let a server shape it (#1807)
A server can answer the library with createLibraryHandler, a fetch handler, and shape what it offers: hide entries (listed: false) or route browser-direct ones through itself (fetch: proxied). View-bounded entries ask for a grid-snapped box, and GeoParquet is read on the server within it. Applications can pass their own tile and data fetchers (createApplicationTools({library: {fetchTile, fetchData}})), and with library.requireCatalog a catalog that does not answer offers nothing and is asked again later. Tile paths have one spelling: integer z/x/y without leading zeros, within the grid and the entry's zooms. A server's index and partition reads are bounded and counted against its subrequest limit.
2026-11-17 23:34:00 -08:00
Sameh Khamis 0e6973e0b2 Hand the application the renderer's own engine
An application may draw with a renderer's engine directly beside the
contract. ApplicationHooks gains engine, whose kind names the engine;
Cesium's plugin hands {kind: 'cesium', viewer}. An application draws only
with engines whose kind it knows, and what it draws is its own to add,
update and remove.
2026-11-17 22:19:21 -08:00
Sameh Khamis 8a5f53004f Merge branch 'main' into fix/bikeshare-coverage 2026-11-17 21:20:50 -08:00
Sameh Khamis ce3fc4bc83 Merge remote-tracking branch 'origin/main' into fix/bikeshare-coverage
# Conflicts:
#	src/i18n/locales/ar.json
#	src/i18n/locales/de.json
#	src/i18n/locales/es.json
#	src/i18n/locales/fr.json
#	src/i18n/locales/he.json
#	src/i18n/locales/it.json
#	src/i18n/locales/ja.json
#	src/i18n/locales/pt.json
#	src/i18n/locales/ru.json
#	src/i18n/locales/sv.json
#	src/i18n/locales/uk.json
#	src/i18n/locales/zh-CN.json
#	src/i18n/locales/zh-Hant.json
2026-11-17 21:08:44 -08:00
Sameh Khamis c1ca67bdb1 feat(places): export normalizeOsrmSteps from sources/places so any route proxy serves Directions' turn-by-turn steps 2026-11-17 21:05:20 -08:00
Sameh Khamis 69177feb65 Merge remote-tracking branch 'origin/main' into shots/click-to-go-reorder
# Conflicts:
#	src/i18n/locales/ar.json
#	src/i18n/locales/de.json
#	src/i18n/locales/es.json
#	src/i18n/locales/fr.json
#	src/i18n/locales/he.json
#	src/i18n/locales/it.json
#	src/i18n/locales/ja.json
#	src/i18n/locales/pt.json
#	src/i18n/locales/ru.json
#	src/i18n/locales/sv.json
#	src/i18n/locales/uk.json
#	src/i18n/locales/zh-CN.json
#	src/i18n/locales/zh-Hant.json
2026-11-17 20:44:05 -08:00
Sameh Khamis 3fa3756ca4 Merge branch 'main' into fix/bikeshare-coverage 2026-11-17 20:40:53 -08:00
Sameh Khamis 6b78d72f52 Go to a shot by clicking its row; move shots up and down
Clicking anywhere on a shot row (its number, title or summary line), or
pressing Enter or Space on its title, now selects the shot and loads it,
which is what the row's LOAD button did; the LOAD button is gone. In its
place, up and down arrows swap the shot with its neighbour through
SceneDirector.moveShot, which saves the project and publishes shot-moved.
The arrows are disabled at the ends and while the scene plays, and neither
they nor DEL load the shot.
2026-11-17 20:37:29 -08:00
Sameh Khamis 8fe4be484f Bike Share marks its covered cities on the globe
Above the height stations draw at, the layer only said "Fly below 48 km to
a covered city" without showing which cities those are. Every system in
the registry now has a marker there: a green, white-ringed dot over its
city, 5 km up so terrain never hides it, shown only while the layer is on
and stations are not drawn.

Clicking a marker flies straight down into its city from 20 km, as an
explicit camera action through the shell's runNavigation, like News and
the weather layers. The markers belong to the layer for picking.
2026-11-17 20:30:04 -08:00
Sameh Khamis f5d3521cda The title logo goes back to live at the starting view
The logo in the title was only a picture. It is now a button, "Back to
live at the starting view": the world clock goes live and the camera flies
to the view the app started from, letting go of whatever it follows as
Reset Globe does.

The shell's returnToStart() does it. It flies to the `homeView` option of
createApplicationControls, which is the start view unless given: an
application that passes `startView` only to carry a view across a rebuild
can keep the logo on its own first view. START_VIEW is exported from
./application/controls for that.

The title heading keeps "GOD'S EYE VIEW" as its name beside the button.
2026-11-17 19:48:46 -08:00
Sameh Khamis d9b187bf9a Airport vehicles and ground stations must behave as such
A feed's ZVEH type held for any contact, so a test transponder at 77 m/s
drew as a car driving at airliner speed and a drone at 762 m as a car in
the air; a GRND station reporting 11,880 m drew as a mast in the sky.
ZVEH now holds only for a contact reported on the ground (or with no
altitude) at up to 40 m/s; anything else is classed as an aircraft. A
GRND station stands on the ground whatever height it reports.
2026-11-17 19:13:04 -08:00
Sameh Khamis ca5e82ae41 Merge remote-tracking branch 'origin/main' into selection/no-tint
# Conflicts:
#	docs/CURRENT-STATE.md
2026-11-17 18:46:23 -08:00
Sameh Khamis dc9b1042df Merge remote-tracking branch 'origin/main' into selection/no-tint 2026-11-17 17:53:51 -08:00
Sameh Khamis 4c0afcff9e Merge branch 'main' into fix/flights-feed-type 2026-11-17 17:52:37 -08:00
Sameh Khamis f49352d228 fix(selection): selecting or tracking a contact never recolours it
A tracked aircraft's icon and 3D model keep the colours they have
untracked in Flights and Military Flights (no cyan, no lighter amber);
only the icon's alpha changes (stale fade, clear while its model draws).
A selected vessel or aid keeps its type colour instead of white, and a
tracked satellite's dot keeps its class colour instead of yellow. An
emergency stays red while tracked.
2026-11-17 17:49:33 -08:00
Sameh Khamis f2537743ab fix(flights): class an aircraft by its feed's type from the first fix
A civil aircraft was drawn as an airliner until its type lookup answered,
even when its feed already named the type: a helicopter showed the
airliner icon and model for as long as the lookup took.

- Flights classes every contact, and picks its model, by the feed's own
  ICAO type designator from the first fix. A looked-up type replaces it
  once the lookup answers and outranks the feed's on every later poll;
  the lookup still runs and fills the type name and registration.
- A surface emitter category still keeps only a ground type (ZVEH, GRND)
  from the feed.
- State vectors have no type field, so an /api/flights answer may send
  `typeByIcao` beside them, by ICAO address, as `emergencyByIcao` is sent.
  The regional adsb.lol fallback now sends it from each row's `t`.
2026-11-17 17:37:48 -08:00
Sameh Khamis 914b28822a The followed aircraft's trail runs to where the aircraft is drawn
When an application places live contacts itself, the tracked trail was cut at the layer's own delayed clock, which can run minutes behind the placed aircraft: the trail ended far behind the aircraft, and its head was dropped while that clock warmed up. The trail now reads the aircraft's time off its own reports at the point where it is drawn, for Flights and Military Flights.
2026-11-17 17:36:36 -08:00
Sameh Khamis 39f2d0b165 Merge remote-tracking branch 'origin/main' into fix/models-black
# Conflicts:
#	docs/CURRENT-STATE.md
2026-11-17 16:54:43 -08:00
Sameh Khamis e83c1672dd fix(models): tracked and emergency tints mix into aircraft paint instead of multiplying it
Aircraft models multiplied their tint into the shaded paint (HIGHLIGHT).
A saturated tint zeroes every channel it lacks: the tracked cyan (no red)
drew a red helicopter solid black, day or night, and a white Cessna one
flat cyan. Tinted models now mix the colour in at 30%
(AIRCRAFT_MODEL_TINT_MIX), so the paint stays readable and the colour
still marks them; untinted models still draw their own colours, and the
IR boost stays flat white.

Neither the multi-part models nor the part shader were involved: old and
new GLBs, with and without the shader, render the same pixels, and an
untinted model at night is lit by the default ambient term.

The new conformance check draw.models.paint draws a model painted with
COLOR_0 under a fixed sun and reads its colour by day, at night, and
under a tint mixed in. The parts test model can now carry vertex paint.
2026-11-17 16:50:52 -08:00
Sameh Khamis b9cbc42f20 Merge remote-tracking branch 'origin/main' into models/three-km-true-size
# Conflicts:
#	docs/CURRENT-STATE.md
2026-11-17 15:29:39 -08:00