The heat raster was 2048 px wide with a 3 px blur, so every fire spread
over ~200 km and the far-zoom map read as clouds next to the markers.
Double the grid to ~10 km per pixel and blur by one pixel: a lone fire
is now a spot about as wide as its marker at the 3,000 km hand-off.
Play no longer runs ahead of the data. The world clock gains a wait, which
holds continuous play where it is while a layer loads what the time needs,
and a gate, which keeps play from passing a time a layer has yet to load.
Weather gates play at its next frame and waits there until the frame shows,
so every frame is seen however fast play runs; it waits no more than eight
seconds on a frame that never comes, and takes a wait only when its frames
change. Play pressed while a frame loads waits for it too. A scrub still
drops what loads and moves on.
The bar loses its long date and the dates at its ends: the time rides in a
bubble over the handle, which pulses while play waits, and the bar runs
left to right in every language. Play starts at real time.
Away from live, a launch shows from its lift-off on: its marker, label,
paths and orbit stay hidden while the world time is before it, so scrubbing
or playing brings the launches up in the order they flew. The selected
mission stays whenever it flies, and live shows every launch as before.
Play on the timeline runs the whole track in about a minute, from its start
when at live, and runs the clock itself past weather's own replay. It goes
live when it reaches now, or holds at an end that lies ahead of now. Going
live puts the rate back to 1.
A release that only selects a station now stops the looping noise source and suspends its AudioContext. The qa-radio dial scenarios start from an active stream, or expect a silent release from a stopped Radio.
About 90% of detections are under 20 MW, so the old blue and teal
stops painted most of the map in cold colors that do not read as fire.
The ramp now runs ember, red, flame, orange, gold and white-hot at the
same thresholds, each stop lighter than the one below, so the brightest
marks are the strongest fires. The heatmap uses the same colors.
Releasing the tuning dial always started the chosen station, plus tuning
static, even when nothing was playing. It now follows the Previous/Next
rule: the release plays only if a stream was loading, buffering or playing
when the drag began; otherwise it just selects the station.
The privacy note no longer lists finishing tuning as a way to connect and
now names voice instead, in all locales. Docs, changelog and comments are
tightened to match.
Main moved the layer rows to Vue, so the fire confidence switch and
minimum-FRP slider now render through RowSwitch and RowSlider on the
kit's UiSegmented and UiSlider, with the same classes as before. The
fire filter strings are translated into Arabic.
main moved the Radio markup into Vue views and rebuilt the UI tests on
stores. Resolved:
- src/ui/templates/context.html: deleted in main; the new privacy note now
lives in src/ui/views/panels/RadioPanel.vue.
- src/ui/radioControls.test.mjs: main's store fixture; the Next/Previous
autoplay test drives store.act('cycleRadio').
- src/voice/gevRealtime.test.mjs: main's createTestVoiceUi; the stop and
select handoff cases stay one table-driven test.
- src/data/radioNextState.test.mjs reads the published gev-radio view.
- src/i18n/locales/ar.json: the new note translated for the Arabic locale.
Layers whose data has a time of its own follow the page's world clock from
the start; live feeds such as flights, military, vessels and transit stay
live. Launches register the span of the launches loaded, so turning them on
brings up the timeline. Each timed layer registers its coverage once and
reports none while off, telling the clock after each step has settled. The
launch feed keeps its own window, and an orbit ring is drawn again once the
world time has moved far from when it was drawn.
The catalog stored the designator on satrec.intldesg for
internationalDesignatorYear, while the active-TLE lookup parsed the same
columns with tleLineLaunchYear. Each catalog entry now keeps launchYear from
tleLineLaunchYear, which moves to src/sources/tle.js beside the other TLE
field readers, and internationalDesignatorYear goes.
A blank designator now reads as an unknown year in both lookups; the
active-TLE lookup read it as 2000.
Directions, the Contacts marker and panel, placed annotation labels, the
drawn-line measure, the Cockpit and formatRouteDistance each chose the unit
and precision on their own, and most chose before rounding: #1450, #1433 and
formatDistanceText or kilometreDigits from src/data/distanceFormat.js, which
cut after rounding. Each keeps its own metre step and rendering.
That also fixes the 10 km cut the Contacts marker and panel, the drawn-line
measure and the Cockpit still had (9,960 m read 10.0 km). The helper returns
kilometres already rounded, so the plain marker and the localized panel no
longer disagree on half-tenths such as 1,450 m.
A negative annotation distance now leaves the label without a distance, and
a drawn line with a coordinate that is not a number shows no measure, rather
than printing 0 m or NaN km. The HUD altitude tag and the spoken view height
keep their own unit choice.
The bar now needs more than the world clock being away from live: a layer
that moves with the clock must be on with time to show. In Core that is
weather radar, satellite or lightning with frames; a host adds layers by
following them. Turning the last one off hides the bar; turning it back
on brings it back.
The world clock reports this as `supported` in its state. Weather products
register their frames as coverage one by one, suspended or not, so the way
back to live stays on screen with reduced motion. Weather refreshes and
satellite catalog changes tell the clock their coverage may have changed.
A coverage that throws counts as none, and the clock reads its state once
per notification round.
Field 28, worldTime, holds the world time of a link made away from live:
zigzag seconds since 2026-01-01, like field 8, but it may lie ahead of the
link's creation (a forecast moment). Opening such a link pauses the world
clock at that time; a link without it leaves the clock alone, so a page
opens live and Back or Forward does not stop a replay. Times no JS Date
can hold are dropped.
Core told time eight ways: Date.now() in most layers, JulianDate.now() for
flights and military, Cesium's clock frozen at page load for the sky, the
weather clock for observed imagery. They now read one clock,
src/time/worldClock.js, exported as ./time.
Live is a mode, not a timestamp: while live the clock is the wall clock,
so every layer draws as before. Away from live only the layers that follow
the clock move with it. The weather products follow it, as they followed
the weather transport; a host opts others in with follow(id).
- The weather clock takes its time from the world clock and drives its
replay, stepping its frames as before.
- Satellites, launches, flights and military (still 30 s and 15 s behind),
transit, GNSS, Recent Imagery, street level, the HUD and the celestial
ring read worldTimeFor(id). Cadences stay on the wall clock.
- Cesium's sky (stars, sun, moon, atmosphere, lighting) draws at the world
time each frame instead of the moment the page loaded.
- Weather frames and satellites declare coverage() for a host's timeline.
The transit, ALPR, vessel, CCTV and flight/military context fixes each
wrapped 359.5° to north with an inline Math.round(x) % 360. They now call
roundHeadingDegrees in src/data/headingDegrees.js, which also wraps negative
and multi-turn bearings. normalizeHeading moves there with it, and
cockpitMath re-exports it so existing imports keep working. It now adds a
turn only to a negative remainder, so a bearing just under half a degree
keeps its precision.
The awareness, Local ADS-B, cockpit wind, cockpit heading and Street Level
readouts use the same helper. The Cockpit's TRACK ACQUIRED signal rounded
without wrapping and could read COURSE 360°; it now uses
formatHeadingReadout, which shows --- for a track that is not finite.
Main moved the UI to Vue views and Pinia stores, so the Arabic changes to
the old DOM controllers now live in their views: the rail legend range
comes from formatScaleRange (keeping units a source supplies as given),
the voice timeout options are worded by Intl unit formatting in
VoiceControl, and the scene editor's JSON fields stay left to right in
SceneDialog. Main's CCTV status line, launch panel and calibration values
keep the Arabic isolates and Western-digit formatting.
isolate() and keepCodesWithValues() read the locale through getLocale(),
which follows the page's vue-i18n instance, and the Intl formatters take
intlLocale(getLocale()). A language switch now applies in place, and
applyDocumentLanguage sets <html dir> on every switch, so the page mirrors
without a reload.
The icon rails and their tips are placed with logical properties, so they
stay on the outer side of the mirrored stacks; Cyber's new stack offsets,
padding and edge lines are logical too, and rtl.css moves Cyber's right
stack to its new rail clearance. Main removed the Context mini radio, so its
right-to-left rules and test go.
The Arabic catalog gains main's new strings and drops the ones main no
longer uses; the other catalogs keep main's new keys and the branch's
landing labels.
Choosing a language in the picker now applies it at once. The choice is
stored and ?lang is kept in step through replaceState, and the picker keeps
focus.
Code that writes translated text itself re-presents it on a switch:
onLocaleChange() lets an owner listen, removed at teardown, and status
writers hand over a function of the locale (voice cards, scene director,
SDR, draw hints, imagery split, map sources, Bhote Koshi media) so the
words are rebuilt rather than re-sent. The HUD, cockpit, radio, CCTV,
launch, awareness and credit texts follow the same hook, and
applyDocumentTranslations can be applied again without undoing text code
wrote since.
The unsaved-work registry and persistLocaleAndReload existed only to guard
the reload, so they go, with their catalog entries.
A one_side line that doubles back within 5 m of itself, such as a
turnaround drawn as one line, matched its own return leg and took a
two-way half share with no partner. Flow index pieces now carry their
source line, and a radiusFor of 0 leaves a piece out of nearest(), so
pairing skips the line's own pieces.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
TomTom draws a two-way street whose directions differ as two one_side
lines on one centreline, and each got a one-way road's full share of
simulated vehicles, so the street drew twice the dots of the same street as
one full-coverage line or a two-way OSM road. A one_side line with an
opposite-direction one_side line within 5 m of at least two of three points
along it now gets a two-way direction's half share. On the decoded Austin
flow fixture every one_side line is paired, and road length weighted by
direction share falls from 553 to 417 km. Pairing a 16-tile area takes
about 41 ms per road pass. Refs #1455.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A refreshed manifest could lose its credit in two ways. A frame still
loading when the refresh arrived had no credit yet, so the refresh was
skipped and the frame installed with the credit of the snapshot it was
staged from. And a host switch restaged the shown frame, then re-applied
the refreshed manifest captured when the restage began, overwriting any
newer refresh that arrived while it loaded.
Each frame now remembers the latest refreshed manifest of its product,
whether or not its imagery is installed yet, and takes its credit from it,
falling back to the snapshot it was staged from. That snapshot still
supplies the time and bounds. A restage passes the newest refreshed
manifest to the new frame up front instead of re-applying a captured one
afterwards, and a refresh that arrives while a frame loads is kept for a
later restage.
A weather source can describe its own products (credit, units, coverage,
legend) through an optional `display` object in each product manifest:
source, credit, units, coverage, info, legend and extent. The weather
layer uses each valid field in the row summary, legend, info text,
coverage navigation, outside-coverage status, layer stats and imagery
credit, and keeps today's built-in value for any field that is absent or
invalid. Units and legend describe one scale, so they apply only as a
valid pair; otherwise both keep their built-in values, and the radar
info heading names the units in use.
Text is single-line and length-capped. It rejects control characters
(U+0000-U+001F, U+007F-U+009F), line and paragraph separators, and
invisible or format characters: soft hyphen (U+00AD), combining grapheme
joiner (U+034F), Arabic letter mark (U+061C), Mongolian vowel separator
(U+180E), zero-width and direction marks (U+200B-U+200F), bidi embedding
and override (U+202A-U+202E), word joiner, invisible operators and bidi
isolates (U+2060-U+2069), variation selectors (U+FE00-U+FE0F), the
byte-order mark (U+FEFF) and tag characters (U+E0000-U+E007F).
Legends need 2-16 stops whose labels are plain decimal numbers or short
text and whose colours are #rrggbb. A number label must read back
exactly as the legend shows it: within the safe integer range, with no
leading zeros and no digits lost to rounding. Extents must be finite, in
range and non-empty. Supplied source and units text is data: the layer
marks it so the panels show it untranslated, while built-in values are
translated as before.
The imagery credit is escaped as plain text and follows a refreshed
manifest even when the shown frame stays the same. A refresh changes
only the credit: the shown frame keeps the snapshot it was staged from,
so a later host switch restages it with its own time and bounds and the
refreshed credit. Manifests without `display`, including the bundled
nowCOAST ones, render exactly as before.
IntelHUD no longer builds #intel-hud with innerHTML or writes its readouts
by id: it publishes its readouts, typing summary, REC blink, visibility,
layout variant and style colors through its publish option to the gev-hud
store, and the intel-hud application view renders them. The corners render
from mount so the panel layout controllers register them as obstacles.
The vessel layer presents the selected vessel's readout through
src/hudReadouts.js, which IntelHUD follows, instead of writing into the
HUD. The Cyber sonar state answers a HUD toggle from IntelHUD's visibility
rather than the class the view renders on its next update.
The awareness layer presents the compass ring, heading, cardinal labels and
contact bearing markers through subscribeDirectionOverlay(); the application
shell publishes them to the gev-awareness-direction store and the scene
chrome renders them in the viewer's container.
The launches layer keeps the replay state, projection and wording and
presents the replay vehicle overlay through subscribeReplayOverlay(),
sending nothing for an unchanged frame, so the portable launches entry
stays free of Vue. The application shell publishes each presentation to
the gev-mission-replay store and the scene chrome teleports the vehicle,
orbit dot and callout into the globe container with the same markup,
classes, mode, transform, rotation and sonar opacities. Hiding keeps the
mode, place and text, as before.
createWindInspectionMarker() moves to src/layers/wind/inspectionMarker.js,
so the portable ./tools entry that reads wind/inspection.js stays free of
Vue. It keeps the frame listener and projection and presents where the
inspected point falls to the gev-wind-inspection store after each
rendered frame, publishing nothing for an unchanged frame; the scene
chrome teleports the marker into the wind layer's container with the
same class, inline style, hidden state and position. The application
guide lists everything leaving out the scene chrome now leaves out.
The Cockpit controller publishes which surfaces are shown (the entry
button and TR-3B chip, the HUD with its exit and reset buttons and
briefing card, and the Contact card) and the views bind them. Focus moves
to the exit button, and back to the entry, after Vue renders them.
Layout scheduling counts the published presence as visible, so entry
still lays out the cards. The Display portal restores only focus its move
dropped. The Missions layer no longer hides the Contact card directly.
The catalog now passes the gnss-integrity source's windowMs to the layer.
A missing, non-finite or non-positive value keeps the 30-minute default.
The row text now names the window the layer uses instead of a fixed 30 min.