On the photoreal stack the rendered-mesh floor took one probe at each coarse
cell's centre (0.001 degrees) and kept it for the session. A centre on a roof
passed the +80 m DEM window and lifted every vehicle in the cell to roof height
(a Haymarket bus drew 23.5 m above the street, on the garage roof); a centre in
the river put Red Line trains on the Longfellow Bridge 6-9 m under the deck.
The sampler now probes at the caller's point. A cell with a reading is probed
again only at spots about 17 m apart from earlier ones, eight at most, and a
spot refused only because the cell's DEM prior was cold is tried again later.
The floor keeps each reading that passes the gate at the point it was taken
(two within about 5 m keep the lower; sixteen at most per cell) and answers a
read from the reading nearest the asked point, so a viaduct and the street
beside it in one cell keep their own heights.
- Prague PID: map route-id ranges from PID's GTFS (metro L991-993, S/R trains
L1000s/L1100s, P ferries L1800s, trolleybuses 50-59, X lines, funicular LD)
instead of 'below 100 is a tram, rest bus'.
- Bordeaux TBM: trams ride numbered ids 59-62/163/164 (A-F), boats 951-953;
the old letter match never fired.
- Rouen Astuce: TCAR:90 Metro as tram, TCAR:99 Calypso as ferry; Le Havre FUNI.
- Warsaw and Poznan: credit carries the data date (and Warsaw links its API),
as their terms require.
- data.gov.my feeds: CC BY 4.0, refreshMs 30 s to stay under 4 requests/min;
proxy honours per-feed refreshMs.
- Denver: quote the RTD agreement; tests use the feeds' real route ids.
getNearestPositions makes one bounded pass over the shown points, keeps the
nearest few in a short sorted list and reads latitude and longitude for
those alone, leaving out dense extras, asked-for ids and classes such as
debris. A caller that wants the nearest handful no longer builds and sorts
an entry for every satellite.
getById returns a loaded installation with its drawn position, as getNearby
does, without selecting it; findByPick resolves a scene pick (a named
marker's installationId or a site entity) the way the layer's own click
selection reads it. Both return null while the layer is off.
An imaging satellite with a known sensor can now zoom past 8x, up to 128x,
as far as the view stays at least as wide as the sensor's narrowest
standard swath at its live altitude; only swaths confirmed on a cited page
open those steps. The top step follows the altitude and window shape and
steps back when it falls below the zoom shown.
The view draws the sensor's swath to scale along the ground track with a
SENSOR SWATH readout (approximate off nadir), and a SENSOR button zooms to
exactly that width when it lies in range at nadir. From 16x the imagery
tiles the view will need 5 to 20 s ahead along the ground track are
pre-loaded at the matching level. The mouse wheel steps the zoom one notch
at a time, and the identity line shows how old the TLE is. The sensor
figures come from a new bundled pack of 46 Earth-observation platforms,
each value cited to its operator or agency, with its own data credit.
With a satellite tracked and no aircraft tracked, Cockpit can ride the
satellite. Entry needs only the Satellites layer; debris can be tracked but
not entered, and voice stays aircraft-only. Double-clicking the tracked
satellite or the entry buttons (reading ORBIT) enter it.
The camera sits on the satellite's per-frame SGP4 position and looks
straight down, turned to the ground track (north-up for a satellite with
none). The optical zoom steps 1x to 8x with a focus pull, the arrows tilt
the view up to 45 degrees off nadir, and Home or 0 returns to nadir. Off
nadir the tilt reads its total angle first and the swath readout becomes an
approximation marked with ≈. While in orbit the map leases flat Esri
imagery, the cloud pass stays off and the view opens in the optical style.
The orbital HUD names the satellite with its owner's flag (from the
flag-icons package, loaded per country) or an organisation badge, its
operator, class, NORAD and COSPAR ids and TLE epoch with the element lines
on request, altitude, orbital speed and the sub-satellite point. CURRENTLY
OVER names the country and its first-level division, or the sea, and from
8x the most prominent populated place nearby, looked up offline from the
bundled Natural Earth packs (populated places are a new pack). The
satellites layer hides the ridden satellite's own marks, dims the other
orbit rings and ignores scene clicks and Escape while held. Exit restores
the camera's field of view and the satellite's follow camera.
C no longer enters or leaves Cockpit, bridge or orbit: it is left to the
app-wide CCTV shortcut, and Escape or the exit button leave first person.
The orbital view reads a satellite's owner country, operator, COSPAR id,
TLE epoch and whether its class can be ridden. #1558 now carries only
what the class toggles read, so this brings the rest back here, where it
is first used: the classes.js helpers and the UCS pack's operator and
owner fields.
Class toggles only hid points: with Stations off the ISS's orbit ring and
its label still drew, and each catalog refresh showed the ring again. The
ring and label now follow the ISS's class, and the tracked card no longer
names a docked companion whose class is hidden.
A failed Starlink load reverted to the core catalog without applying class
visibility again, so the core catalog's own Starlink points stayed on while
the chip, legend and lists said Starlink was off, and classes.starlink kept
reading true. Both are put right on failure.
Deduplication kept only the first group's tag, so a recent imaging
satellite in both visual and resource, with no UCS record or known name,
fell to Probes. The catalog entry now keeps every group, and the
last-resort class is the first of them that names one.
SATCAT groups merged in group order, so a stale cached copy read later
overwrote a current record of the same object: a satellite SATCAT now
calls dead stayed in Imaging. A stale copy no longer overrules a current
read, from the same merge or an earlier one.
Only catalog and the tracked satellite were saved for the layer, so a class
chip lasted until the next reload and no share link carried it. The choice
is now the satellites option `classes`: one letter per class shown
(`sitpd` by default, `0` for none), with Starlink left to `catalog`, and
the layer takes the letters back through setParams. A partial request
(`{debris: false}`) hides only what it names.
Showing only Stations and Imaging by default hid GPS, GEO comsats, Hubble
and the rest of what the layer showed before classes, for every existing
user and saved view. Every class now starts on except Starlink, which stays
off as the DENSE switch was.
The satellites layer now sorts every object into Stations, Imaging,
Telecom, Starlink, Probes or Debris, each with a chip and a live count on
the layer row. Stations and Imaging show by default; the Starlink chip is
the former DENSE catalog switch. Hidden classes keep their points, so a
toggle needs no reload, and they leave the detection overlay and the voice
position lists.
A class comes, strongest evidence first, from CelesTrak SATCAT (object type
and status, served by a new /api/celestrak-satcat/<group> proxy route and
cached for a day), the bundled UCS Satellite Database pack (operator, owner
country and purpose), name patterns for later launches, and the CelesTrak
group. The core catalog also reads the resource, weather, planet, sar and
science groups. Payloads with no evidence of life launched 20 or more years
ago are filed as debris. The UCS pack, its build script and its data credit
are added.
The vessel layer draws other ships at their last AIS fix and does not
advance them, so dead-reckoning radar contacts moved the mismatch from own
ship to everyone else: a 15 kn ferry reported 90 s ago showed ~700 m ahead
of the ship out of the window. Own ship stays centred where the camera
rides; contacts go back to their last fixes, and the query drops the extra
reach and candidates (which could also cut the nearest ship in a crowd).
The sprite and card were hidden from the bridge but the selected-vessel
trail was not: at sea it ran astern from under the eye, and on a raised
river it lay buried under the water. It is now hidden while the bridge
holds its ship, keeping its history, and shown again on release.
The radar centred on the ship's last AIS fix while the camera rode that fix
dead-reckoned up to 180 s ahead: at 20 kn about a nautical mile apart, so a
ship already passed still showed ahead. Own ship now sits where the camera
rides and each contact is dead-reckoned to the same moment; the query reaches
past the range for ships that have since moved into it.
Ships with no MMSI each get a key of their own instead of all sharing an
empty one on the scope.
With no aircraft tracked, Cockpit can ride the selected AIS vessel. Entry
needs only Live AIS Vessels and a selected vessel; C, double-click and the
entry buttons (reading BRIDGE with a ship icon) enter it, while voice stays
aircraft-only.
The eye sits on the AIS position at a representative bridge height for the
vessel's type family, looks along true heading and moves along course over
ground. The last fix is dead-reckoned for up to 180 s between the layer's
refreshes, and on rivers and lakes the waterline is read from the rendered
surface around the ship rather than the geoid.
The bridge HUD shows speed and course over ground, a straight heading
tape, window mullions, the AIS destination as a reported voyage and a
heading-up radar of nearby ships (3 to 24 NM). The arrow keys look around,
Home or 0 looks ahead again. The vessel layer hides the ridden ship's
sprite and card, ignores scene clicks while held, and returns the camera
to the vessel's map view on exit.
Turning CCTV on picked the first catalog record, so at King's Cross it
showed a Sydney camera. enable() now picks the camera nearest the viewer.
Until someone chooses a camera, each settled move re-picks the nearest,
so a share link whose flight lands after CCTV turned on still opens
nearby.
createTrafficSource({ roadModes }) lets a host offer a subset of the TomTom,
OSM and Hybrid road modes (all three by default). Without OSM the layer never
draws simulated roads, and a single mode shows no road chip.
While flow is live the Street Traffic row offers Lines (every road with flow
as a steady green/amber/red line, from the heat-line renderer) and Dots (the
moving dots), saved in layer state and share links. Defaults: Lines off,
Dots on.
- releaseCameraOwnership marks the camera released before stopping, so a
flight navigation asked to preserve survives; exit also releases it, so an
inactive layer never cancels another owner's flight.
- The failure toast names the mission index only when its error is from the
current Context attempt (stats.errorAt), not an earlier one.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Review fixes on top of #1578:
- Exiting Space Missions cancels the layer's own camera flights again (entry,
roster preview, mission focus); only a flight navigation started after
releaseCameraOwnership() runs on.
- A failed first index load says so: "Space Missions unavailable: the
mission index could not load. Try again later." on both the Context and
Data Layers routes, instead of a generic transition toast. Translated.
- Regression tests for both; docs and changelog describe the real feedback.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Review fixes on top of #1601:
- Only redirect a provider the params switch on to a keyless source, so a
filter-only setParams (360°, SINCE) no longer moves an explicitly chosen
keyless Mapillary to KartaView.
- Keyless QA gate: assert the new KartaView default and that the Mapillary
chip explains its key instead of switching (it used to expect KEY REQUIRED).
- Tests: Graph-proxy keyReady, filter-only updates; shared test helper.
- README and CURRENT-STATE describe the keyless default.
Co-Authored-By: Claude Opus 5.5 <[email protected]>