From gekh's review of #768, each with a test that fails before:
- The routes refuse cross-site requests (sameSiteGated, as the paid
proxies do) and the tile route has a generous per-IP limit (600/min), so
another page cannot burn the token's quota or trip the shared 429 hold.
- At most six upstream fetches run at once; a queued request that is
abandoned never fetches, nor does one abandoned during the disk read.
- A body past the 48 MB cap aborts the upstream request as it streams.
- Empty tiles are charged against the memory and disk budgets.
- Each disk write uses its own temp file and a retrim is skipped while a
write of that tile is pending, so concurrent hits cannot extend a tile's
life or fail a rename.
- Upstream refusals other than 401/403/429 answer 502.
- The tile route's success path is tested end to end (200 with the image
layer stripped and the right headers, 204 when empty, an abandoned
response aborts upstream); the teardown race that made this file flaky
is gone (240 parallel runs, no failure); the QA-constant tautologies are
replaced by a check against the real provider registry; the boundary
group lists the modules the provider actually imports.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
From gekh's review of #768, each bug with a test that fails before:
- P2: a failed sequence load clears the previous sequence's cones, resets
the selection and can be retried; a second click while loading starts no
second lookup. sequences.js had no tests: sequences.test.mjs now covers
failure and retry, a superseded late answer, the cache and clearSelection.
- P2: closing a photo stops MapillaryJS sequence playback, which kept the
hidden viewer stepping and downloading images.
- openNearest without the panel reports it instead of loading forever, and
stops if the layer (or its provider) went off during the lookup; the
mesh sampler's misses are bounded and forgotten with its samples; the
sequence count is the union of ids across tiles; a provider withdraws
only its own error, so a sequence error cannot mask KEY REJECTED; hover
stays on (throttled) under an orbiting camera and re-picks when it
stops; "since N days" follows the clock in a long-open tab.
- A prewarm waits for one in flight and then builds if it gave up.
- New coverage for the layer core (credits, KEY REJECTED vs REQUIRED,
switching a provider off), the refresh wiring of the tilted-view fix and
the draped-to-cast swap completion.
- Cleanup: loading is derived from pending; freshStreet(); tile ranking
computes distances once and shares one path for the date line; shared
metresBetween / whenIdle / redrawTile; one NEAREST_RADIUS_M and one
source method list; unused contract fields, exports, getImage and the
decoder's image branch removed; PROVIDER_COLORS lists only Mapillary.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The diagnostics from d9b13c7 named the CI failure: the press landed on the
globe canvas, not the header, because the CCTV panel had moved 32 px down
between the hit check and the press (docked at 234, 266 at the press) -
something above it in the rail grows on the runner after load. A press that
provably missed the header (the page records the pointerdown target) says
nothing about dragging, so it is retried up to twice, logging what sat
above CCTV at dock and at the retry; a press that landed in the header and
did not lift still fails at once.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
From the IC8 review of #768 (P2s), each with a test that fails before:
- Switching the layer off and on during the first photo download no longer
leaves the viewer stuck on "not mounted": an outdated mount only unmounts
an adapter nobody else holds and subscribes poses only once current, and
the MapillaryJS adapter never builds a viewer after it was unmounted.
- Hover picks at most every 120 ms (the CCTV convention), not while the
camera moves or a button is held, and not after the layer went off.
- Esc shrinks the expanded viewer wherever focus is (document capture), so
the map keeps its selection, and Tab from outside returns into it.
Closing a photo moves focus to the panel instead of dropping it on body.
- Portable panels lift only after a mouse or pen moves past the drag
threshold: a click on a docked panel's edge or a touch swipe on its
header no longer turns it into a floating window, and pointercancel
saves nothing and puts the panel back.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
On the CI runner the header drag stopped lifting CCTV (it did not float),
right after a run where its box never held still: the rail is shifting
there, so the press can land beside the header. It does not reproduce
locally (both gates pass on a fresh key-less dev server). The gate now
waits, bounded at 10 s, until the title point is on the CCTV header before
pressing, and a failed lift reports the element pressed, whether it was in
the header, and where the panel was when docked and at the press.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
On the CI runner the CCTV box never held pixel-identical for ten animation
frames within 15 s, so settle() timed out and failed the gate although the
street-level gate before it passed. The wait now rounds the box to whole
pixels, polls every 100 ms for half a second of stillness, and only logs if
the rail keeps moving: the lift is checked against the box recorded at
pointerdown, so settling is only there to make that box the docked one.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The fixture gate always reported a configured key, so the KEY REQUIRED path
most installs see never ran in CI, nothing checked that the lazily imported
MapillaryJS viewer loads, and the FOLLOW step (which needs an open photo)
failed for anyone with a Google key. Fixture runs now:
- check the viewer is stood up in the panel ahead of the first photo;
- serve a rejected key and assert KEY REJECTED, no further tile requests on
a pan, and no stale message once the layer is off;
- open a second page whose server has no key and assert KEY REQUIRED;
- treat FOLLOW as a photo step.
Passes 16/16 locally against a dev server with Google 3D available.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The panel gate read the docked box after a fixed 600 ms sleep and expected
the lifted window 100 px above it. On the Linux CI runner the rail was still
moving and the panel sat 8 px lower when the drag began, so the gate failed
("lifted top: expected 156.5, got 164.8") although the window followed the
pointer exactly. Wait for the box to hold still for ten frames, record it at
pointerdown, and compare the lifted window against that.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The Street Level and panel gates never ran in CI, and the live gate needs a
Mapillary token, the Mapillary network and real coverage at its test site,
so everything users see was guarded only by manual runs (which a bad token
and expired tile caches blocked twice this week).
`qa-street-level.mjs --fixtures` (npm run qa:street-level:fixtures) answers
the page's /api/mapillary/status and coverage-tile requests from generated
tiles (a street grid with flat and 360 deg sequences, half captured three
years ago; overview points from orbit) and blocks mapillary.com. Only the
six steps that open a photo are skipped. Because the data is known, the 360
deg and SINCE steps also assert that the filters remove sequences, not just
that counts do not grow. A unit test pins the fixture contents.
New CI job "Street Level browser gate": install with headless Chrome, start
a key-less dev server, run the fixture gate and qa:panel-resize. Locally,
against a dev server with every key blanked: 14/14 on three consecutive
runs, panel gate all pass.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
From the test-engineering review of #768: the rendering and panel code had
thin unit coverage (coverage.js 29% of lines, sequences/viewer/selection
~30%, cameraFollow 50%, streetLevelControls only source-text checks), and
two shipped bugs were caught only by the manual browser gate.
- coverage.test.mjs drives the real createCoverage against a fake scene and
a source whose tile requests the test resolves. It reproduces gekh's P0 #2:
a request superseded by retire() finishes after a newer one for the same
tile. Without the ownership checks it drops the newer request's key and a
refresh starts a duplicate whose lines nothing can remove (fails on the old
loadTile, passes now). It also covers the draped-to-cast swap keeping both
line sets on the globe until the cast one is built and clear() removing
both mid-swap, and a tile with nothing castable not being rebuilt.
- coverageFixture.mjs encodes Mapillary-shaped coverage tiles (sequence
lines, overview points) from lon/lat; the tests and the hermetic gate use it.
- cameraFollow.test.mjs pins the underground-camera fix: a -14,886 m sample
is ignored for bare earth, a plausible sample wins, and following stands at
eye height. Three of the four fail on the pre-fix module (the first reports
"centre at -14884 m").
- streetLevelControls.test.mjs is a contract test through the real
DataLayerManager and LayerStateCoordinator: a 360 deg click and a SINCE
release reach the durable layer state and the encoded share link under
Street Level's token. Against a stand-in layer it also covers the chip rule
(darkening the last lit chip turns the layer off, provider kept on; lighting
a dark chip is a user params request, then enable), the legend rebuilding
on a same-count swap (review #9) and the viewer resizing only on open
(review #8). With the old direct-to-layer routing, three of these fail,
including both share-link tests.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Norway's ~850 working road cameras load from one keyless GeoJSON request
to the agency's OGC API view of its DATEX 3.1 CCTV table, so no DATEX
account is needed. Faulty cameras are dropped, every camera sits under a
"Norway" category, and the ~135 that publish HLS play as live video
through the existing in-memory relay with the still as fallback. Frames
and manifests are pinned to each camera's own path on the agency hosts.
CCTV_VEGVESEN_ENABLED=0 disables the pack, CCTV_VEGVESEN_MAX_SOURCES
caps it (nearest the largest cities first) and CCTV_VEGVESEN_VIDEO=0
keeps stills only. Attributed under NLOD 2.0.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The fixture answers /api/vessels without X-Feed-Source, so the source
fell back to the feed's name and the attribution check failed. Send
AISStream as the bundled server does.
The flight, military and vessel feeds were named after the providers the
bundled server uses (/api/opensky, /api/adsblol/mil, /api/ais-live and
their track routes; createOpenSkySource, createAdsbLolSource,
createAisStreamSource). Any server should be able to answer a feed from
its own provider, so the feeds are now:
/api/flights /api/flights/track?icao24=
/api/military /api/military/track?hex=
/api/vessels /api/vessels/track?mmsi=
with createFlightSource, createMilitarySource and createVesselSource. The
old routes are removed. Each server names its provider in X-Feed-Source
(the bundled server sends OpenSky Network, adsb.lol and AISStream, so its
attribution is unchanged) and the military feed's cache state and age in
X-Feed-Cache and X-Feed-Age-Ms. Sources report the provider the server
names and fall back to the feed's name.
The vessel source accepts an optional area and sends it as lat, lon and
radius_km. The vessel layer asks for the area the camera shows (centered
on the middle of the screen, sized by camera height), or every vessel
from high enough up, and asks again when the view moves or zooms by a
quarter of that radius. vessels_in_area names its area too. Servers that
hold every vessel may ignore the area; callers still keep only what is
inside it.
Brings in 123 commits from main, including the v0.2.0 and v0.2.1 releases
(MCP server and tool catalog, server security hardening, build hygiene).
Conflicts:
- package.json: kept main's script order and added this PR's
qa:panel-resize and qa:street-level; exports keep both sides (main's
tools/view entries and this PR's street-level and Mapillary entries).
- src/tooling/viteBuild.test.mjs: kept this PR's Mapillary-token define
assertion and main's new wildcard-host allowedHosts assertions.
- CHANGELOG.md: main now has release sections; this PR's entries go under
[Unreleased].
Checks after the merge: doctor, format:check, check:boundaries,
layer-token:check (28 published, 1 new: street-level 0), npm test (5726
pass), build, the Windows job's focused tests (70 pass), qa:panel-resize,
and the keyless street-level gate. The new CSP allows Mapillary (https:
connect/img, blob workers). The keyed gate stops at coverage locally
because the dev .env Mapillary token is invalid (upstream 403), not because
of the merge.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The Cockpit utility gate still expected five modes and an inherited NOIR
entry. Cycle all seven modes, check each drives only its own shader and that
Normal clears them all, enter on a Noir map preset, and restore it through
Exit Cockpit and Reset.
Co-authored-by: Sameh Khamis <[email protected]>
Co-Authored-By: Claude Opus 5.5 <[email protected]>
localRequestGate.mjs owns the reverse-proxy header list and hasProxySignals;
Provider Settings, the cross-site gate and /mcp all use it instead of two
copies of the same nine names. The changelog credits the cross-site gate.
Co-Authored-By: Claude Opus 5.5 (1M context) <[email protected]>
Binding HOST=0.0.0.0 no longer sets Vite's allowedHosts to true. The dev and
preview servers accept IP addresses, localhost and the LAN hostnames listed
in GEV_ALLOWED_HOSTS; suffix and wildcard entries are ignored. The
configuration factory takes the resolved list as an input, so build/vite.js
still reads no environment.
Ported from #97 to the current build/vite.js layout. Fixes#21.
Co-authored-by: Sameh Khamis <[email protected]>
Co-Authored-By: Claude Opus 5.5 (1M context) <[email protected]>
The OpenAI endpoints (/api/realtime/token, /api/openai/hud-summary) now
allow 30 requests per minute per client IP and the Google Places endpoints
120, the caps the Pinokio build already ships. GEV_RATELIMIT_OPENAI_PER_MIN
and GEV_RATELIMIT_GOOGLE_PER_MIN still override them and exactly 0 disables
them; an unreadable value falls back to the default rather than to
unlimited.
Salvaged from #683 onto current main.
Co-authored-by: Sameh Khamis <[email protected]>
Co-Authored-By: Claude Opus 5.5 (1M context) <[email protected]>
The cost-bearing endpoints (/api/realtime/token, /api/openai/hud-summary,
/api/google/nearby-places) and the voice debug log refuse cross-site browser
requests: a foreign or opaque Origin, a Sec-Fetch-Site other than
same-origin/none, or proxy forwarding headers. Loopback tools without an
Origin and the LAN opt-in keep working. The dev and preview servers send one
shared Content-Security-Policy, and embed-mode framing rewrites only the
frame-ancestors directive of it.
Salvaged from #242 onto current main.
Co-authored-by: Sameh Khamis <[email protected]>
Co-Authored-By: Claude Opus 5.5 (1M context) <[email protected]>
Cesium's script sets CESIUM_WORKERS itself when it loads, so the panel's
combined workers script was never used, and neither was the embedded
terrain-heights file: the worker still requested it from the panel
page's site. The panel build now writes only the prelude, and the panel
puts it ahead of whatever Cesium assigns to CESIUM_WORKERS. The separate
esbuild bundle of Cesium's workers is gone.
The ground-polyline worker loads approximateTerrainHeights.json itself,
and a worker's requests go to the panel page's own site, where they
failed with 404 and stopped rendering once ground-clamped lines such as
military installations appeared. The panel build now embeds that file in
the workers script, which answers the worker's request from memory.
Hosts serve panels from their own sites and may refuse other addresses;
Codex refuses any address on the user's machine. The panel now never
requests the app's server: it loads the app's panel build and data
through panel_request, a tool only the panel may call, which requests
the path from the app's server. One path in every host; only map
providers load directly.
npm run build:panel writes the panel build to dist/panel, served at
/panel/: one app script, one stylesheet, Cesium's script, and Cesium's
workers as one script Cesium runs from memory. Tools may now be marked
app-only. The panel CORS rules are gone.
show_on_globe replaces open_in_gods_eye_view and names an MCP Apps view, a
ui:// panel that loads the app in embed mode and posts each later view to it,
so the globe in the conversation changes without reloading. It also takes a
view another answer returned. Tools can declare a UI resource, and the MCP
adapter serves resources/list and resources/read and lists each tool's
resource in _meta.ui.resourceUri.
?embed=1 shows the globe alone: clean view with the HUD, panels, welcome and
setup prompts hidden, and provider attribution kept. The page that frames it
sends views with postMessage; the app applies each through its own actions
and reports every step. Annotations in any link are drawn once it restores.
Only embed-mode documents may be framed; every other page keeps
X-Frame-Options DENY and frame-ancestors 'none', and
GEV_EMBED_FRAME_ANCESTORS can restrict who frames them.
Tool answers with something to show now include data.view: the view with
the matching layers on, the area framed from above or a single aircraft or
satellite followed, and the link that opens it. Area framing moves to
src/tools/views.js so links and answers frame alike.
A view is a camera, data layers, visual style, map imagery and an aircraft,
military aircraft or satellite to follow, written in the share-link format
the app already restores. gods-eye-view/view builds, encodes and decodes one,
and share links take their style names from it. open_in_gods_eye_view now
builds its link from a full view: an area or camera, layers, style, map and
something to follow.
Brief sections received a named place as its bounding box, so they centered
on the box's middle: Tokyo's aircraft were sorted from a point in the
Pacific. Sections now receive the place name and resolve it like a direct
query, and place lookups are cached briefly so a brief resolves it once.
The caption request declared every answered section nominal, so a stale
aircraft snapshot reached the caption as live. Each section now reports
stale or unavailable from its own result, and the provenance envelope is
built with the app's feedProvenanceEnvelope.
get_transit_vehicles returned positions from a feed the proxy served from
its error cache, and hour-old fixes, as current. It now applies the transit
layer's rules: a feed is stale when the proxy says so or the operator has
not answered recently, and fixes older than the vehicle limit are dropped
and counted.
The raycast challenge on #768 showed bare-earth casting misplacing roads
that are not at grade: lines floated over freeways in trenches and steep
streets (rendered line pixels floating: Austin 8.5%, SF 27.1%, LA 43.8%),
because a ~111 m terrain grid cannot see a 30 m-wide cut or a slope between
its corners.
meshSampler.js samples the rendered Google 3D surface (scene.sampleHeight,
overlays excluded) once per ~11 m cell within 900 m of the camera, nearest
first, in idle time within a 6 ms budget; misses are retried, not latched.
groundCast.refineHeights blends it in, per point along a line:
- mesh up to 3 m above bare earth is the road: follow it, 1 m above;
- higher mesh (canopy, deck, roof): carry the road's offset from bare earth
across from the road samples on both sides (up to 8 points);
- otherwise bare earth + 2 m, as before.
Lines, cones and the marker use it; tiles touched by new samples are
redrawn one per idle slice with the no-blink swap.
Rendered line pixels on the surface / floating, before -> after:
Austin 90.0 -> 95.3% / 8.5 -> 0.7%; SF 69.0 -> 86.4% / 27.1 -> 9.1%;
LA 52.3 -> 91.0% / 43.8 -> 4.0%; Innsbruck 95.0 -> 95.7% / 0.2 -> 0.2%;
Sacramento 80.7 -> 79.3% / 3.8 -> 2.7%; buried lines stay under 1%.
Cones floating in SF 44 -> 5%, buried at LA 59 -> 28%. Main-thread long
tasks added during refinement: at most 134 ms (Austin, densest tile).
Roads on elevated decks are still drawn at ground level under the deck.
Unit tests cover the blend (trench, slope, canopy bridge, deck, bad probe),
the finer cast with meshAt, and the sampler (once per cell, nearest first,
overlays excluded, far cells skipped, misses not latched, idle when off).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
From the code review of #768:
- view.js measured the camera's height above ground with globe.getHeight,
but Google 3D hides the globe, so coverage picked its zoom from the
ellipsoidal height. Over a high city (Denver, ~1,600 m) a camera 500 m up
read 2,100 m: coverage stayed at z12/z13, whose tiles are too big to cast,
and lines stayed draped on the roofs. With the globe hidden, the bare-earth
height from the ground caster now answers; coverage re-picks its zoom when
the surface mode changes. Verified in Denver: terrain mode, z14, cast lines.
The core's surface check uses the same helper (and no longer subtracts the
2 m lift from the camera height).
- castTile rebuilt a tile even when no line could be cast (terrain proxy
down, tile too big); it now leaves such tiles as they are.
- The feature gate read Street Level's share token as a literal `0`; it now
takes it from LAYER_STATE_REGISTRY, since a rebase can reassign it.
New view.test.mjs covers the shown-globe, hidden-globe and no-sample cases.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The merge of main (c451478) appended main's new entries directly after
this branch's last entries in scripts/format-scope.json (after
streetLevel/index.test.mjs) and in two groups of
scripts/package-boundaries.json (after app/layers/streetLevel.js), without
the separating comma. Both files stopped parsing, so every CI job failed
at its first JSON read, the "Check adopted formatting" step.
With the commas back, the CI steps pass locally: doctor, format:check,
check:boundaries, layer-token:check against main, npm test (5475 pass),
build, and the Windows job's focused onboarding tests.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
src/tools/surfaces.js lists the tools a surface leaves out, and the MCP
server, the voice session's tool list and the browser catalog voice calls
all filter through it. Voice leaves out tools that answer with images, link
to the app, or repeat what its app actions already answer.
The datacenter and dam layers parsed their bundled GeoJSON Lines and
built analyst records inside the Cesium-backed layer module. Move the
data URLs, the line parser, mapAnalystRecord and layerTitle unchanged to
src/sources/infrastructureData.js; the layer module imports them and
still exports mapAnalystRecord. The consumer-build pin lists the new
module.
Add find_alpr_cameras over the layer's OpenStreetMap camera extracts:
cameras in a US or Canadian area of at most 3° per side, nearest first,
with operator, manufacturer and facing direction, and the source's
attribution. Areas outside coverage or too wide are reported.
Add find_submarine_cables over the bundled TeleGeography data: cables
passing through or landing in an area, or matching a name, with landing
points and the dataset's attribution. The local MCP server's fetch reads
the bundled data files a browser would load by URL, and nothing outside
that directory.
Add get_recent_imagery. It searches the recent Harmonized Landsat and
Sentinel-2 catalog for an area, picks the image the layer would show
with the layer's own ranking, and returns it with its date, sensor and
cloud cover, falling back to the VIIRS daily overview.
Add get_weather_map, which returns the latest NOAA radar, satellite or
lightning map over an area as an image, choosing a window the image
route accepts and reporting areas outside the product's coverage, and
get_wind, which samples GFS or IFS wind at a location with the wind
layer's own grid sampling.
open_in_gods_eye_view accepts layers and writes them with the app's own
share-link layer codec, so the link opens with those layers on. Layer
names are limited to the registered layer ids.
layerState.js held both the share-link layer codec and the coordinator
that restores layer choices into the running app and persists them to
browser storage. Move the coordinator, unchanged, to
layerStateCoordinator.js so the codec stays a pure data module that code
outside the browser can use to write share links. The registry stays in
layerState.js, where the token tooling reads it, and the aircraft
barrel re-exports both.
Move the composition of the default tool services from the Node MCP
server into gods-eye-view/tools/services, a portable export. Given a
fetch that resolves the sources' /api paths, it builds the same services
in a browser as on the local MCP server, so other surfaces can compose
the same catalog. Queries still read only their services.
Mount the local MCP server at /mcp on the development and preview
servers for clients that connect by URL. The route accepts only
requests from this machine that name a loopback host and, when an
Origin is sent, come from a loopback origin, and drains oversized
bodies so the 413 response is delivered. The provider-order regression
test now pins the route between the providers and the API fallback.
Add open_in_gods_eye_view. It builds a version 2 share link looking
straight down on an area, with altitude chosen from the area's size, on
the app address the application supplies.
Add vessels_in_area, find_vessel and get_vessel_track over the live
vessel source, and a ships section in situation_brief. Without an AIS
key the source's own message reaches clients as an unavailable feed.
