Commit Graph
1109 Commits
Author SHA1 Message Date
Sameh Khamis b277b55547 fix(selection): a click that follows a contact from straight down keeps the camera's heading
A click keeps the camera's view of the contact it follows (keptViewFrom),
but a follow frames the eye from its offset alone, its heading the way the
offset leans. Seen from straight down, the eye's view at a contact off the
centre leans only as far as the Earth curves between them, towards the eye,
so the follow turned the camera to face the contact's bearing (from north
to 298 degrees on a click 40 km out from 60 km up). followViewFrom keeps the
range and the tilt to the contact's horizon and turns them to the pose's
heading, a view straight down kept a hair off vertical so its heading holds.
Flights, Military Flights and trains follow from it; a world-focus fly-to,
which sets its orientation itself, keeps the view as it was.
2026-11-14 13:14:15 -08:00
Sameh Khamis d3cc95e9a6 fix(transit): a selected vehicle's trail head is one outlined line again, its centre no darker than before
The seam drew the head as two stacked translucent lanes (a 5 px dark
backing under a 3 px colour line), which darkened its centre by up to 40
of 255 over light ground. It is now one 5 px line with a 2 px dark
outline in the same pass, as the head's own material drew it before.

Conformance gains draw.lines.outlineDraped: a draped, translucent,
revealed outlined line, its centre as bright as a plain line of the
colour, its edges dark, nothing past the reveal.
2026-11-14 12:35:24 -08:00
Sameh Khamis dd15223109 Class only PID's trolleybus lines as trolleybuses, and name the new modes in the plural for voice
PID's routes.txt types lines 51, 52, 53, 58, 59, 232 and 275 as
trolleybuses (route type 11); the rest of 50 to 59 stay buses, as before.
Voice now also knows trolleybuses, gondolas, cable cars, funiculars and
monorails.
2026-11-14 12:22:30 -08:00
Sameh Khamis 39c89d563b Draw transit vehicles as trolleybuses, cable cars, funiculars, gondolas and monorails
The transit layer knew five modes, so a trolleybus drew as a bus, a
funicular as a train and a coach as a city bus. The GTFS basic route types
are now modes of their own (trolleybus, cable_tram, monorail, funicular,
aerial_lift), each with an icon, colour, detection tier, card word, voice
name, speed ceiling and fleet model.

A vehicle record may carry its route's GTFS route_type as routeType. It
settles the mode after the feed's fleet hint and before its route hint, and
picks the finer model (a coach for 200, a high-speed set for 101) when the
type is a kind of the vehicle's mode. Retained history classifies epochs
through transitModeFor too, so trails join the live vehicle.

Route hints from each operator's routes.txt: Prague's trolleybus lines
(51-59, 232, 275) and Petrin funicular, and the trams, trolleybuses and
metro lines of Bucharest, Cluj-Napoca and Turin. A feed may also name
route corrections that outrank the route type: Le Havre's routes.txt types
its funicular (8-FUNI) as a bus, so it is corrected to a funicular.
2026-11-14 12:03:12 -08:00
Sameh Khamis 52507a0755 Draw no buoy for a virtual aid to navigation
A virtual aid (AIS message 21's VirtualAtoN flag) is a mark broadcast
where nothing physical stands, so drawing it as a buoy showed a mark
that is not there. The vessel source record now carries `virtual`
(false unless a source says true; any source may set it), AISStream
sets it from VirtualAtoN, and the vessel layer keeps such an aid's
disc: vesselModelSpec returns null for it and the layer gathers no
model item for it. Its card, selected card and readout add VIRTUAL
after its kind.
2026-11-14 11:07:13 -08:00
Sameh Khamis 6c7fe48f40 Show an aid to navigation's kind, not a speed or heading
A buoy's card, selected card and HUD readout showed "0.0KT · 135°" from
whatever its source reported. A fixed mark has neither, so they now show
its kind alone, whole ("CARDINAL MARK N", which the 14-character type cut
read as "CARDINAL MARK "), in the bone white of its disc.

isAidToNavigation now knows every kind an aid report names ("Light, with
sectors", "Fixed structure off shore" had no aid word), leaves out a
"Buoy Layer" as it does a tender, and matches each type text once: the
vessel layer asks per vessel on its rotation pass, which now skips the
aid discs it never turns.

Aid rows no longer cost ships their place: aisStreamRows lists every
vessel ahead of every aid, so the layer's 12,000-row request never drops
a ship for a buoy, and vessels_in_area (and the brief built on it)
counts ships only. An aid's name runs on into its NameExtension.
2026-11-14 10:02:59 -08:00
Sameh Khamis 866a9816f2 Merge origin/main into the renderer seam
Brings in main up to f24abfc88: cockpit subject providers, the render
failure notice, aircraft drawn in their own mesh colours, airport ground
vehicles, and an aircraft with no ground track facing its true heading.

Under the seam:
- The render failure notice lives in the Cesium adapter
  (src/render/cesium/renderFailure.js) and is the application hook
  renderFailureNotice({allowReload, store}); its private Cesium fields
  (Event's raise queue, the widget's render loop flag) are read through
  internals.js. The inline panel's timer waits while the frame port reports
  the loop stopped, and goes on after a Retry.
- Ordinary aircraft models draw white with the 'highlight' colour blend
  through the draw port; tracked and emergency colours tint the mesh.
- Held trains and transit vehicles hide their route set and markers through
  the draw port; the fleet model test fakes answer loads through the fake
  draw port instead of Cesium's glTF loader.
- The Cockpit's subject view follows and places the camera through the
  camera port.
2026-11-14 09:59:55 -08:00
Sameh Khamis 279aedb2f4 Draw aids to navigation as buoys
A buoy, beacon, RACON, light or IALA mark in the vessel feed was drawn
as a ship. A vessel record whose type names one, or whose MMSI is an
aid-to-navigation station's (99MIDxxxx), is now isAidToNavigation and
vesselModelSpec draws it as the fleet set's buoy of its mark (cardinal
N/E/S/W, port or starboard hand, safe water, isolated danger, special
mark; a red can when the type names no mark), at its built size and
flagged fixed so its model does not turn to a heading. Its icon is a
disc instead of a chevron.

AISStream now subscribes to AidsToNavigationReport by default, and the
server names each report's aid type code (0 to 31) as its kind instead
of reading it as a ship type.
2026-11-14 09:54:01 -08:00
Sameh Khamis b86014244d fix(input): no double-click follow or zoom on the map
The globe viewer's own double-click tracked a picked entity with a
position or zoomed to one without. Layers moving onto the draw port had it
re-created one by one (data/stockFollow.js); following is a click in GEV,
so the viewer's handler is removed where the viewer is made and every
re-creation goes: earthquakes, cyclones, air quality, news, perimeters,
drone airspace, ghost maps, places, radio, cables, CCTV, ALPR, launches,
bikeshare, Local ADS-B, installations, directions, trails, data packs,
annotations, the library's view and local GeoJSON. The Cockpit's own
double-click and the draw tool's finishing double-click stay.
2026-11-14 09:10:14 -08:00
Sameh Khamis 58776a6976 Merge branch 'main' into fix/adsblol-true-heading 2026-11-14 09:00:30 -08:00
Sameh Khamis fd06272e37 fix(flights): an aircraft with no ground track faces its true heading, not north
readsb rows (adsb.lol and a local dump1090 receiver) often send no track for
an aircraft on the ground, only its true heading. The track then read as
missing and the aircraft was drawn facing north, so one taxiing south looked
like it was moving backwards. Each normalizer now falls back to true_heading,
never the magnetic heading.
2026-11-14 08:49:29 -08:00
Sameh Khamis 4d81d3be3a Describe aircraft models in their mesh colours in the docs 2026-11-14 08:24:51 -08:00
Sameh Khamis 8cb096fc21 Draw aircraft models in their own mesh colours
Every aircraft model (Flights, Military Flights, Local ADS-B) mixed 94% of a
flat class colour over its mesh, so airliners drew as white silhouettes and
military ones as amber. Models now use HIGHLIGHT: white leaves the mesh's own
colours as built, and the tracked and emergency colours tint the mesh without
hiding its paint. The IR boost still draws them flat white.
2026-11-14 08:06:51 -08:00
Sameh Khamis 91b080a45a fix(geo-import): KML icons stay on their points when zoomed out, and turn by heading as before
Cesium's KML loader shrank an icon's hot-spot offset with the icon and
turned a heading about the Earth's axis. The drawn pins kept the full
offset at globe distance (up to ~14 px off for the Google Earth pushpin)
and turned about local north, which differs in a tilted view. They now
scale the offset with the icon and turn about the Earth's axis by the
heading.
2026-11-14 02:03:26 -08:00
Sameh Khamis c99c577b3e fix(trails, data-packs): a scene with no page to take input from draws without a double-click
The double-click follow asked for the scene's input when a set was first
drawn. On a headless scene Cesium's event handler needs a document, so
drawing a trail or a pack threw there. Asking is guarded, as Directions
does: a scene that cannot take input has no double-click.
2026-11-14 01:55:35 -08:00
Sameh Khamis 805c9b5ccd fix(voice): point-and-ask over a Street Level coverage line names its sequence again
The coverage lines were one primitive per sequence, picked as the
sequence's id. Drawn in parts, a part after the first carries its own
#n id, which point-and-ask passed on. A hit whose item names the id its
parts pick as (meta.pick) resolves as that id, as the line's click
already does.
2026-11-14 01:47:20 -08:00
Sameh Khamis d2e161372c fix(vessels): the ship the Cockpit rides is no object in view again
In-view scanning skipped a vessel whose chevron was hidden and not drawn
as its model, which covered the ship the bridge camera rides. It now
skipped only vessels past the horizon, so the ridden ship was reported,
at the camera's own position. It is skipped again unless its model draws
it.
2026-11-14 01:46:41 -08:00
Sameh Khamis a9de7b3510 fix(trails): a double-click zooms to a trail line again
A trail was polyline entities, which the default renderer's double-click
zoomed to. As draw-port lines they took no part in it. Every trail on a
viewer shares one double-click handler, let go with the last trail.
2026-11-14 01:28:28 -08:00
Sameh Khamis 94ea9cd01d fix(submarine-cables): a double-click follows a landing point or reference and zooms to a cable again
The cables, landing points and references were entities, which the default
renderer's double-click followed (a point, or a reference at its tip) or
zoomed to (a cable or area) until the sources were replaced or hidden. As
draw-port items they took no part in it.
2026-11-14 01:24:24 -08:00
Sameh Khamis c57a8bea83 fix(alpr): a double-click follows a camera with its card again
Each camera was an entity, which the default renderer's double-click
followed, showing its card; a camera no longer shown, or a hidden layer,
took the follow with it. As a draw-port icon it took no part in it.
2026-11-14 01:18:51 -08:00
Sameh Khamis fbc40ef3b6 fix(earthquakes, cyclones): an item that goes takes its double-click follow with it
Removing a followed entity ended the default renderer's follow. A disc gone
from the feed, or a storm point gone from the advisory (or a cleared one),
now ends it too.
2026-11-14 01:17:08 -08:00
Sameh Khamis 26e8e26ba8 fix(ghostmaps): a double-click follows a pin or zooms to a line or area again
Each edition was drawn as entities, which the default renderer's
double-click followed (a pin) or zoomed to (a line or polygon); an expired
report or a replaced edition took the follow with it. drawnItemTarget reads
that rule off a draw item, for every layer that drew entities before.
2026-11-14 01:15:29 -08:00
Sameh Khamis 766cf68272 fix(local-adsb): a double-click follows a local aircraft with its card again
Each aircraft was an entity, which the default renderer's double-click
followed, showing its tracked card; an aircraft that expired took the
follow with it. As a draw-port icon it took no part in it. A double-click
follow can now carry the holder whose entity record shows the card.
2026-11-14 01:12:14 -08:00
Sameh Khamis b9ccdff0a3 fix(flights): a delivery after a pause in polling does not raise the display delay
A hidden tab pauses polls; its first delivery after that measured the pause
as feed lateness and pushed the delay up for minutes.
2026-11-14 01:07:04 -08:00
Sameh Khamis e3cfdcf44e Tracked aircraft keep moving when reports give no speed or a stale one
A fix that moves while the reported speed is 0 or stale used to leave the
aircraft frozen, then jump it kilometres at once. The step between fixes now
measures a jump, and the drawn speed bounds the recovery.
2026-11-14 01:06:21 -08:00
Sameh Khamis 63a6595eaf fix(directions): a double-click follows an A or B marker and zooms to the route again
The markers and the route were entities, which the default renderer's
double-click followed (a marker) or zoomed to (the route). As draw-port
items they took no part in it. Directions now joins the stock double-click
as launches and imported pins do.
2026-11-14 00:44:58 -08:00
Sameh Khamis 667ca632ed fix(library): view-bounded GeoJSON draws as the GeoJSON loader drew it
On the draw port, a Data Library dataset's polygon and line edges were
drawn as geodesics and every feature took the entry's colour. The loader
drew ground edges along rhumb lines and honoured a feature's own
simplestyle fill, fill-opacity, stroke, stroke-opacity and stroke-width,
with a colorBy fill over them. The library now uses local GeoJSON's
rhumb densifying and simplestyle reading for the same result.
2026-11-14 00:32:22 -08:00
Sameh Khamis 5f98f8bdf3 Aircraft drawn as far behind real time as their feed is late, along one curve their trail follows
Civil and military aircraft were drawn a fixed 30 s (15 s) behind real time
while anonymous feed reports arrive about 90 s old every 30 s, so every
contact dead reckoned about a minute past its newest report and snapped
when the next one landed (several km on a turn), and the tracked trail,
recorded from those drawn positions and patched as reports arrived, kinked.

- The display delay (data/displayDelay.js) is the 90th percentile of the
  newest 256 report lags plus 5 s, between the layer's floor (30 s, 15 s)
  and five minutes, slewed at most 0.2 s/s up and 0.05 s/s down. Icons,
  the renderer's live motion clock, labels, HUD, detection, the tracked
  camera and the trail read the one delay; following the world clock
  draws with none and deliveries leave it alone.
- Between two reports an aircraft flies a biarc (data/fixCurve.js) that
  passes through both and leaves each along its track, sent as contract
  arc segments; the trail is the reports joined along the same curve, so
  the icon sits on it. Nothing drawn between reports is kept.
- A report a coasting contact missed is eased onto from where it would
  have been that frame (at least 3 s, at most 30% over its speed, within
  20 s); over 5 km it jumps. Past its newest report a contact coasts
  straight on: a turn rate averaged over earlier reports outlived the turn.
- Forward synthetic fixes no longer block real reports older than them,
  and a history keeps 24 fixes.
- A feed simulation (testSupport/aircraftFeedSim.mjs) checks both layers
  against a 90 s late feed, a fallback switch, repeated reports, outages
  and the world clock.
2026-11-14 00:31:29 -08:00
Sameh Khamis ea3b87805a Raised GeoJSON and cable polygons are lit by the sun again
The loader's entities drew a polygon with per-position heights through a
lit appearance; through the draw port it went flat. Local GeoJSON and
submarine cable fills with heights pass lit: true, as file import does.
2026-11-13 23:59:19 -08:00
Sameh Khamis 491c50ed18 Rebuild the airport vehicle models with real shapes
The car, van, fire truck and pushback tug were stacked boxes. The car is now an
operations SUV (rounded body, glass house with a sloped windscreen, roof light
bar, grille and lamps), the van a high-roof panel van, the fire truck an airport
crash tender with roof and bumper turrets on three axles, and the pushback a low
chamfered tug with a glazed cab. All stand on the ground at their built size.
Their trail anchors are measured again.
2026-11-13 23:43:09 -08:00
Sameh Khamis 6e655b801d feat(fleet): draw airport ground vehicles by callsign and ground stations as a radio mast
Feeds carry many airport ground vehicles (type ZVEH) and ground stations
(GRND) that were drawn as the generic plane, some at the 10 km airborne
default.

- types.json gains aircraft_callsign rules: a ZVEH callsign starting FIRE is
  a fire truck, PUSH/TUG a pushback tug, DEICER/SQUID/SQB a van, else a car.
  GRND draws a new 11.8 m radio mast (other/radio_mast.glb).
- resolveAircraft and aircraftModelSpec take the callsign; a matched rule
  names the model outright, ahead of the type's class model.
- The layer spec cache keys such types by the rule matched, so it holds at
  most one entry per rule.
- These models (catalog category `other`) draw at their built size, as such
  models already do, and a
  contact with no altitude whose model is one now stands on the ground; the
  feed's own type is kept for such contacts, as no airframe lookup knows it.
- Local ADS-B passes the callsign too.
2026-11-13 21:20:16 -08:00
Sameh Khamis 7a61bf04a0 feat(selection): selecting a contact keeps its size and the camera's view: aircraft, vessels, trains and transit vehicles keep their form and size when selected (colour only); a click follows from the camera's own distance and angle, the contact gliding to the centre over one second (FollowTarget transitionS, shared rule render/camera/followTransition, conformance camera.follow.transition) 2026-11-13 15:02:28 -08:00
Sameh Khamis e3865f462f Merge origin/main into the renderer-contract branch: the procedural fleet models drawn through the renderer's model sets
Aircraft, military, local ADS-B, vessel, transit and rail models come from
the fleet model set, loaded up front and drawn life size through the draw
port's models sets; no layer touches the viewer or Cesium outside
src/render/cesium/. The models capability gains glTF bytes (gltf), a
per-axis stretch (axisScale), a colour for tinted parts (maskColor) and a
cut below the origin (clip: 'belowOrigin'), with conformance checks.

Main's rail layer and Data Library are ported to the ports; the CCTV
footprint probe keeps the globe-terrain clamp through the query port.
2026-11-13 14:14:42 -08:00
Sameh Khamis 7e45d4d989 fix(flights): a trail does not join its track history across a landing or take-off that was not seen 2026-11-13 12:53:18 -08:00
Sameh Khamis 693faae44e fix(flights): an adsb.lol aircraft with no ground track faces its true heading, not north 2026-11-13 11:50:05 -08:00
Sameh Khamis 92d34bc4cc Stretch a vessel to its beam only beside a reported length
A vessel drawn at its type's typical length keeps the model's proportions:
a reported beam alone would squeeze a 300 m container ship to that width.
2026-11-13 07:42:27 -08:00
Sameh Khamis a9d390c165 Draw a vessel of unknown length at its ship type's typical size
Most live vessel feeds send no length, and the resolver then fell through
every length rule to the range's last model drawn as built, so a cruise
ship or a container ship showed as the smallest model of its range.
types.json gives each passenger, cargo, tanker, fishing and service range
a typical_len (cargo 300 m, tanker 250 m, passenger 140 m, fishing 40 m,
...); a vessel with no usable length is chosen and drawn at it.
2026-11-13 07:34:41 -08:00
Sameh Khamis a44c42eb94 fix(vessels, transit, rail): fleet models keep their cards and detection, stand on the floor, clip ships at the waterline and follow NVG/FLIR
- a vehicle drawn as a model keeps its selected card and stays in the detection overlay
- transit and rail models drop the 1.5 m floor lift their icons carry
- vessel models are clipped below the waterline
- models switch to an unlit white look under NVG/FLIR and back
- unknown transit modes keep their icon
- aircraft model specs are cached per set; no key-array copies per frame
2026-11-13 07:16:25 -08:00
Sameh Khamis 7b93045895 feat(vessels, transit, rail): draw fleet models under the 3D toggle
Vessels, Transit and Rail turn nearby icons into fleet models at the
aircraft layers' distances. A vessel is drawn at its AIS length and beam
(static dimensions now reach vessel rows), standing at the sea surface; a
transit vehicle or train stands on its road or rail, raised by its type's
elevation, and is painted in its mode or category colour where the model
marks it.
2026-11-13 07:16:25 -08:00
Sameh Khamis fcc44d0eaf feat(flights): aircraft draw life-size fleet models chosen by type
Flights, Military Flights and Local ADS-B draw each aircraft with the fleet
model its ICAO type, class or emitter category selects, scaled to the type's
length, built from the up-front loaded bytes. The eight third-party aircraft
models and their attribution are removed; every shipped model is now the
project's own.
2026-11-13 07:16:25 -08:00
Sameh Khamis f6760ad96c feat(models): the project's procedural fleet models and the resolver that picks one per vehicle
121 GLBs under public/models/fleet (about 2 MB, MIT like the code) with
catalog.json and types.json. src/data/fleetModels.js picks a model by ICAO
type, aircraft class, emitter category, AIS ship type and size, GTFS route
type, transit mode or rail category, and sizes it life size; the set loads
once, up front. Trail anchors are measured from the meshes.
2026-11-13 07:16:25 -08:00
Sameh Khamis e4832c589c Merge branch 'main' into sameh/vessel-photos 2026-11-12 20:32:03 -08:00
Sameh Khamis 347e77d1f6 feat(vessels): a selected vessel shows its Open Vessel Photos photo and MMSI
Selecting a vessel asks Open Vessel Photos (a free, keyless API) for its
photo by MMSI, once per MMSI. The CONTACTS view shows it under the vessel's
name and MMSI with the photographer, the photo's open licence and a link to
the vessel's page; only images on Open Vessel Photos' own host are shown, and
an answer about another MMSI is no photo. The vessel source exposes the lookup
as getEnrichment({kind: 'photo'}) and fetchOpenVesselPhoto for applications
with their own vessel source.
2026-11-12 20:10:30 -08:00
Sameh Khamis 2445af349d fix(cctv): on a globe map the camera plane ends where the view meets the ground
The activation probe raycast only the photoreal tiles. On a globe map the ray
missed, or ran on through the Earth and met a primitive thousands of
kilometres away, and the monitor plane stood at the camera's full range:
about a kilometre wide and hundreds of metres up. A hit at or beyond the range
now counts as none, and on a globe map the plane also clamps short of the
globe's terrain along the axis, or flat ground at the mount's ground while
that terrain is still loading, whichever is nearer.
2026-11-12 20:10:02 -08:00
Sameh Khamis 4fe8796e89 Swap refreshed Data Library features in place, on every tick
The live refresh had three faults. Its data age counted from when a
fetch finished, so with the manager ticking every cacheSeconds the next
tick found the data just short of due and data refreshed every other
tick. It switched the layer off and on to redraw, which removed the old
features before the new ones were built, closed an open feature card and,
if the rebuild failed, left the layer on but empty. And the tick the
manager runs right after enable refetched after a failed first load, so
a second failure switched the layer off instead of showing UNAVAILABLE.

The local GeoJSON layer gains replaceFeatures(): it builds the new set
while the old one stays drawn, removes the old source only once the new
one is in the scene, keeps a selected feature that is still in the new
set (same id, or same place and label), and on a failed rebuild puts the
old features, records and selection back and rejects. The library's
refresh uses it, counts age from the request, allows a little slack on
the tick, and does nothing until a first load has succeeded.
2026-11-12 17:47:29 -08:00
Sameh Khamis 1a657e2a64 Keep the library layer namespace in the layer lifecycle package
The core layer lifecycle imported the whole Data Library manifest
contract only to check the lib- prefix, so the layer-lifecycle package
owned a feature module. The namespace rule (prefix, entry id pattern,
the two id helpers) now lives in src/data/libraryLayerIds.js, which the
lifecycle owns; the manifest contract imports and re-exports it, so
library callers are unchanged.
2026-11-12 16:04:55 -08:00
Sameh Khamis 9e57fd84c8 Draw Data Library coverage outlines from the bundled Natural Earth countries
Imagery outlines fetched Natural Earth's 1:50m countries (about 3 MB)
from the natural-earth-vector repository's master branch on GitHub at
run time: a moving, rate-limited source whose failures silently removed
the outlines. Core already ships the pinned 1:10m countries pack, so
the outlines now read that, once, the first time an outline needs it.
2026-11-12 16:02:07 -08:00
Sameh Khamis d58ba23fba Refresh live Data Library datasets once older than cacheSeconds
A dataset layer loaded its features once and kept them until it was
removed: the parsed set survives disable/enable, so NWS alerts, GDACS and
EONET showed what they held when first switched on for the whole session.

A library dataset now asks the manager for a refresh every cacheSeconds.
Once its data is that old it loads again, and swaps the new set in only
when it is ready, so the old features stay drawn while the request runs
and stay if it fails. An enable after cacheSeconds also loads afresh.
Disable and destroy cancel a refresh in flight.
2026-11-12 15:48:14 -08:00
Sameh Khamis 1a7ef7fc7a docs(data): the Bhote Koshi event layer's comments say event 2026-11-12 11:41:54 -08:00
Said Turksever db80d82b8d Add the Data Library: live regional datasets, tiles and packs
DATA LAYERS keeps its curated core layers; regional and niche sources
live in the Data Library, opened from Browse data library at the foot
of the panel. Each entry is a JSON manifest in src/library/entries/
pointing at a live upstream (query API, provider-hosted file or tile
endpoint), so nothing is bundled and a self-hosted instance hosts no
data. Sources without CORS go through one allowlisted /api/library
route. Kinds: dataset (GeoJSON, CSV, JSON records, ArcGIS, partitioned
GeoParquet), tiles (XYZ, WMS/ArcGIS bbox export, terrarium relief) and
pack. Selections persist and travel in share links as lib=, separate
from the core layer tokens. Library rows get Zoom and Remove icon
chips that work while the layer is off, rendered through RailChips.
Strings are translated in every locale.
2026-11-12 12:26:45 +00:00