On the photoreal stack the rendered-mesh floor took one probe at each coarse
cell's centre (0.001 degrees) and kept it for the session. A centre on a roof
passed the +80 m DEM window and lifted every vehicle in the cell to roof height
(a Haymarket bus drew 23.5 m above the street, on the garage roof); a centre in
the river put Red Line trains on the Longfellow Bridge 6-9 m under the deck.
The sampler now probes at the caller's point. A cell with a reading is probed
again only at spots about 17 m apart from earlier ones, eight at most, and a
spot refused only because the cell's DEM prior was cold is tried again later.
The floor keeps each reading that passes the gate at the point it was taken
(two within about 5 m keep the lower; sixteen at most per cell) and answers a
read from the reading nearest the asked point, so a viaduct and the street
beside it in one cell keep their own heights.
Each sprite layer's icon or dot set is now made at a draw order taken
from SPRITE_LAYER_ORDER through the renderer's per-set drawOrder:
flights over military, vessels, directions, transit, bikeshare, FIRMS
and CCTV, whichever layer was turned on first. Picks name the topmost
first. The orders are negative, so selection highlights, route
endpoints, the tracked plane and every other set at the default order
still draw over all sprite layers, as they did before.
The raise-to-top restorer, the sprite registry and the primitive-name
lookups are gone, which takes spriteOrder.js off the viewer-access list.
Before, the restorer raised the layers to the bottom of the scene in the
order they were enabled, so flights usually ended up under the others.
src/sky/starrySky.js and src/app/viewer.js are Cesium through and
through, so they move into the adapter as src/render/cesium/starrySky.js
and applicationViewer.js; the ./application/viewer export points there.
The celestial ring's precise ICRF rotation reaches the shell through a
Cesium-free registry (src/sky/icrf.js) that the sky provides as it
loads; the application's renderer loads it, and so does
./render/cesium/unbound. Both files leave the Cesium allow-list.
The map stacks' imagery, terrain and Google 3D factories move into the
Cesium adapter (src/render/cesium/mapImagery.js, mapTerrain.js,
google3d.js); the ./maps/imagery, ./maps/terrain and ./maps/3d exports
point there. The catalog names its ion stacks by asset number, and the
map source controller and default sources are Cesium-free: they
build providers and switch imagery layers, terrain, tilesets and the
globe's visibility through a map engine (src/maps/engine.js) that the
Cesium adapter provides as it loads (mapEngine.js), through the
application's renderer or the ./render/cesium/unbound export. The
controller and createDefaultMapSources also take it as an `engine`
option.
src/maps/catalog.js, controller.js, imagery.js, terrain.js and google3d.js
leave the allow-list.
Areas, buildings, routes, arrows, pins and labels are draw-port shapes,
lines and points, one set per mark, faded by upserting their colours.
Pins pulse their ring and size it by camera height; arrows drape.
Ground heights come from the heights service. The module leaves the
Cesium allow-list.
Rouen now reads Métropole Rouen Normandie's TCAR vehicle feed
(api.mrn.cityway.fr) and Le Havre LiA's own GTFS-RT
(opendata.transports-lia.fr), both listed in their transport.data.gouv.fr
records, instead of the unofficial bus-tracker.fr relay. LiA ids carry an
8- prefix, so a new liaRouteLabel strips it and liaRouteMode reads the line.
- Prague PID: map route-id ranges from PID's GTFS (metro L991-993, S/R trains
L1000s/L1100s, P ferries L1800s, trolleybuses 50-59, X lines, funicular LD)
instead of 'below 100 is a tram, rest bus'.
- Bordeaux TBM: trams ride numbered ids 59-62/163/164 (A-F), boats 951-953;
the old letter match never fired.
- Rouen Astuce: TCAR:90 Metro as tram, TCAR:99 Calypso as ferry; Le Havre FUNI.
- Warsaw and Poznan: credit carries the data date (and Warsaw links its API),
as their terms require.
- data.gov.my feeds: CC BY 4.0, refreshMs 30 s to stay under 4 requests/min;
proxy honours per-feed refreshMs.
- Denver: quote the RTD agreement; tests use the feeds' real route ids.
src/services/groundSnap.js and src/services/meshFloorSampler.js no longer
reach Cesium. Whether the surface has streamed comes from the globe port
(the snap waits for the 'tiles' and 'surface' settle kinds; the sampler
runs only with the globe hidden and 'surface' settled), the camera height
gate from camera.pose(), heights from the query port, and the maths from
src/geo/ellipsoid.js. The raw exclusion path is gone: callers see through
their own draw sets by id. Cockpit's ground probe names the tracked
contact's icon and model sets, which the flights and military layers keep
on its entity record (groundSets), instead of the tracked holder object.
Probing is unchanged: at the caller's point, up to eight readings per cell
about 17 m apart, a read answering from the nearest one.
The application operations entry is now Cesium-free: a viewer with no
renderer bound needs ./render/cesium/unbound loaded first. Tests that used
to get the adapter's factories through ground snapping load it themselves.
The dispatcher now builds on renderer.input and the query port, with
positions as plain {x, y}. Its viewer access count is zero and it leaves
the Cesium allow-list. Layers that read the raw engine pick read the Hit,
drawHit or event.native instead, and pickRegistry's resolvePickId and
pickContact take a Hit, with the raw versions kept in the Cesium adapter.
rendererOf gains findInput, provideUnboundInput and provideNativeClick.
event.native carries the engine's pick, drill and pickWindow, and picks
through the follow helper happen inside it. An unbound input port
survives the viewer being bound until it is released.
The query port's pick memo is now per task rather than per frame,
because Cesium's own picks advance the frame number. A click on the sky
skips the depth pass when nothing is on the ray. Touch contact search
keeps its eight-deep drill in a 14x14 window.
Keeping a cell's lowest reading let a street probe pull a vehicle on a viaduct
or bridge in the same cell down to street level. Readings now stay at the point
they were taken (up to eight per cell, about 17 m apart), a read answers from
the reading nearest the vehicle, and two readings within about 5 m keep the
lower.
The rendered-mesh floor took one probe at each coarse cell's centre and kept it
for the session. A centre on a roof passed the +80 m DEM window and lifted every
vehicle in the cell to roof height (a Haymarket bus drew 23.5 m above the
street); a centre in the river put Red Line trains on the Longfellow Bridge
6-9 m under the deck. The sampler now probes at the caller's point, reads a
latched cell again at up to four points apart from each other, and the gate
keeps the lowest reading that passes.
Transit drew its vehicles into two Cesium billboard collections and culled,
turned and floored them through the Cesium scene. It now draws them as two
draw-port icon sets, still and moving, registered with the sprite order by
set id in the same places. Each marker is a plain record; a frame writes the
changed ones in one upsert per set, and markers taken out in one task go in
one removal. Clicks read the draw-port hit.
Visibility uses the query port's horizon test and the frustum planes of the
camera port's pose. Icons stay turned in screen space by an exact projection
through the query port, the same answer the Cesium helper gave. The flat
globe is told from terrain by asking the height service once per surface
change; floors are read again when the answer flips. The mesh floor sampler
sees through the layer's sets by id. The camera pose and surface version are
read once per task.
The Cesium draw port now moves and turns an icon without restyling it. The
GL upload probe moves to src/render/cesium/uploadProbe.js, which the QA
scripts hand to the frame probe; the QA scripts read the billboards drawn for
each set.
Five new camera conformance scripts move the camera by user input: a
left drag that coasts, thirty pixel-mode and thirty line-mode wheel
notches from 5 km, a middle-drag tilt, and Shift and Ctrl drags held too
long to coast. The runner turns input steps into pointer events for a
driver: a move starts where the pointer last pressed or moved and carries
the held button. The golden recorder now drives Cesium's own screen-space
camera controller on a stand-in canvas, with Date on the virtual clock so
inertia is deterministic. The existing goldens are unchanged.
A harness that answers pointer input sets cameraInput and a pointer hook.
Harnesses without it, such as the stub, skip the input scripts.
The input port reported a line-mode wheel at 33 1/3 pixels a line. It now
counts lines as the reference does, 40 pixels a line and 3 lines a page,
so a pixel or line wheel converts back to the same pixels.
Transit lowered the one camera-change threshold every listener shared to
0.05, through a claim ledger. The camera port measures each listener
against its own threshold, so Transit now asks for 0.05 on its own port
listener, nobody else's trigger changes, and the ledger goes.
A new listener measures from the view at the next tick, so the layer looks
at the view once more after that tick, and a move made in between is not
missed. Disable always removes both subscriptions.
The billboards, the occluder and frustum checks and the frame probe still
drive Cesium, so the renderer stays on the Cesium list.
An imaging satellite with a known sensor can now zoom past 8x, up to 128x,
as far as the view stays at least as wide as the sensor's narrowest
standard swath at its live altitude; only swaths confirmed on a cited page
open those steps. The top step follows the altitude and window shape and
steps back when it falls below the zoom shown.
The view draws the sensor's swath to scale along the ground track with a
SENSOR SWATH readout (approximate off nadir), and a SENSOR button zooms to
exactly that width when it lies in range at nadir. From 16x the imagery
tiles the view will need 5 to 20 s ahead along the ground track are
pre-loaded at the matching level. The mouse wheel steps the zoom one notch
at a time, and the identity line shows how old the TLE is. The sensor
figures come from a new bundled pack of 46 Earth-observation platforms,
each value cited to its operator or agency, with its own data credit.
With a satellite tracked and no aircraft tracked, Cockpit can ride the
satellite. Entry needs only the Satellites layer; debris can be tracked but
not entered, and voice stays aircraft-only. Double-clicking the tracked
satellite or the entry buttons (reading ORBIT) enter it.
The camera sits on the satellite's per-frame SGP4 position and looks
straight down, turned to the ground track (north-up for a satellite with
none). The optical zoom steps 1x to 8x with a focus pull, the arrows tilt
the view up to 45 degrees off nadir, and Home or 0 returns to nadir. Off
nadir the tilt reads its total angle first and the swath readout becomes an
approximation marked with ≈. While in orbit the map leases flat Esri
imagery, the cloud pass stays off and the view opens in the optical style.
The orbital HUD names the satellite with its owner's flag (from the
flag-icons package, loaded per country) or an organisation badge, its
operator, class, NORAD and COSPAR ids and TLE epoch with the element lines
on request, altitude, orbital speed and the sub-satellite point. CURRENTLY
OVER names the country and its first-level division, or the sea, and from
8x the most prominent populated place nearby, looked up offline from the
bundled Natural Earth packs (populated places are a new pack). The
satellites layer hides the ridden satellite's own marks, dims the other
orbit rings and ignores scene clicks and Escape while held. Exit restores
the camera's field of view and the satellite's follow camera.
C no longer enters or leaves Cockpit, bridge or orbit: it is left to the
app-wide CCTV shortcut, and Escape or the exit button leave first person.
The orbital view reads a satellite's owner country, operator, COSPAR id,
TLE epoch and whether its class can be ridden. #1558 now carries only
what the class toggles read, so this brings the rest back here, where it
is first used: the classes.js helpers and the UCS pack's operator and
owner fields.