Commit Graph
1724 Commits
Author SHA1 Message Date
Sameh Khamis 9bce41d3c6 Read the mesh floor where transit vehicles and grounded flights actually are
With readings kept per point, the floor a vehicle gets depends on which point
is probed and where it is read. Transit offered the sampler the first point of
each vehicle's path in a cell, usually its oldest fix there, so a vehicle that
stayed in one cell never had its current spot probed. It now offers the latest
point of the path in each cell, and the newest fix in the vehicle's own cell
(the selected vehicle's history is walked newest first).

The grounded-flight display clamp read the floor at its sticky cell's centre,
which now answers from the reading nearest the centre, not the contact. It
reads at the contact's own position, held inside the sticky cell so boundary
hysteresis still applies.
2026-11-09 14:51:35 -08:00
Sameh Khamis 04b8c856ad Keep vehicles off rooftops and bridge decks: probe the mesh where the vehicle is
On the photoreal stack the rendered-mesh floor took one probe at each coarse
cell's centre (0.001 degrees) and kept it for the session. A centre on a roof
passed the +80 m DEM window and lifted every vehicle in the cell to roof height
(a Haymarket bus drew 23.5 m above the street, on the garage roof); a centre in
the river put Red Line trains on the Longfellow Bridge 6-9 m under the deck.

The sampler now probes at the caller's point. A cell with a reading is probed
again only at spots about 17 m apart from earlier ones, eight at most, and a
spot refused only because the cell's DEM prior was cold is tried again later.
The floor keeps each reading that passes the gate at the point it was taken
(two within about 5 m keep the lower; sixteen at most per cell) and answers a
read from the reading nearest the asked point, so a viaduct and the street
beside it in one cell keep their own heights.
2026-11-09 14:51:35 -08:00
Sameh Khamis c073064507 Stack sprite layers by draw order, flights on top
Each sprite layer's icon or dot set is now made at a draw order taken
from SPRITE_LAYER_ORDER through the renderer's per-set drawOrder:
flights over military, vessels, directions, transit, bikeshare, FIRMS
and CCTV, whichever layer was turned on first. Picks name the topmost
first. The orders are negative, so selection highlights, route
endpoints, the tracked plane and every other set at the default order
still draw over all sprite layers, as they did before.

The raise-to-top restorer, the sprite registry and the primitive-name
lookups are gone, which takes spriteOrder.js off the viewer-access list.
Before, the restorer raised the layers to the bottom of the scene in the
order they were enabled, so flights usually ended up under the others.
2026-11-09 14:32:50 -08:00
quanticsoul4772 409dbf1660 Merge branch 'main' into upstream/firms-age-rounding 2026-11-09 13:44:05 -08:00
Sameh Khamis 26665e8390 Embed views and the application shell leave the Cesium allow-list
The embed views fly through rendererOf's camera port with geo maths, and
the panel render loop that keeps an inline panel drawing moves into the
Cesium adapter (src/render/cesium/panelRendering.js); the application
scene hands it to the embed views as `keepRendering`. The shell reaches
the camera, effects and globe through rendererOf and loads no Cesium
factories; whether Cockpit's aircraft is an entity of the viewer's own
comes from the scene's `viewerDrawsEntity`, wired in through the
controls. Callers handing the shell or the application tools a viewer
of their own load ./render/cesium/unbound once, as the ports' unbound
check now records.
2026-11-09 12:43:36 -08:00
Meir Michanie 584732c3ec i18n(he): complete and ship Hebrew
- Add the full catalog (2940 entries keyed by the English text; 75 plural
  entries carry one/two/other per Intl.PluralRules('he')), reviewed for
  meaning, terms, separators and label length.
- Register he: he-IL and he map to it; it joins RTL_LOCALES so <html
  dir=rtl> mirrors the chrome through logical properties and rtl.css.
- rtl.css: Noto Sans Hebrew (loaded with the other Google fonts) leads the
  mono and sans stacks, tracking released like Arabic, HUDs keep JetBrains
  Mono for Latin telemetry.
- same-as-english: instrument codes and HUD readouts stay as printed
  (HDG/BRG/CRS/FOV/CRT/NVG/FLIR/CAL/SRC, MW units, Sentinel-2, km/h...).
- docs/translations/he.md: style, plurals and glossary.
- docs: TRANSLATORS.md and CURRENT-STATE.md updated; normalizeLocale test
  covers he-IL.
2026-11-09 14:41:36 -06:00
Sameh Khamis e6d9ec0636 Starry sky and the application viewer move into the Cesium adapter
src/sky/starrySky.js and src/app/viewer.js are Cesium through and
through, so they move into the adapter as src/render/cesium/starrySky.js
and applicationViewer.js; the ./application/viewer export points there.
The celestial ring's precise ICRF rotation reaches the shell through a
Cesium-free registry (src/sky/icrf.js) that the sky provides as it
loads; the application's renderer loads it, and so does
./render/cesium/unbound. Both files leave the Cesium allow-list.
2026-11-09 12:31:46 -08:00
Sameh Khamis a8a9cc73a4 Map stacks off the Cesium allow-list: providers move into the Cesium adapter
The map stacks' imagery, terrain and Google 3D factories move into the
Cesium adapter (src/render/cesium/mapImagery.js, mapTerrain.js,
google3d.js); the ./maps/imagery, ./maps/terrain and ./maps/3d exports
point there. The catalog names its ion stacks by asset number, and the
map source controller and default sources are Cesium-free: they
build providers and switch imagery layers, terrain, tilesets and the
globe's visibility through a map engine (src/maps/engine.js) that the
Cesium adapter provides as it loads (mapEngine.js), through the
application's renderer or the ./render/cesium/unbound export. The
controller and createDefaultMapSources also take it as an `engine`
option.

src/maps/catalog.js, controller.js, imagery.js, terrain.js and google3d.js
leave the allow-list.
2026-11-09 12:11:42 -08:00
German Khokhlov fce5ee6381 docs(firms): tighten the Suomi NPP notes 2026-11-09 21:44:09 +04:00
German Khokhlov d90da158ea Merge branch 'main' into fix/firms-drop-snpp
# Conflicts:
#	docs/CURRENT-STATE.md
2026-11-09 21:41:01 +04:00
German Khokhlov b04fcf191c docs(firms): count two VIIRS sources in the layer table and test note 2026-11-09 21:38:07 +04:00
German Khokhlov 015e3ff7fc Merge branch 'main' into fix/node26-allocation-gates 2026-11-09 20:19:29 +04:00
quanticsoul4772 f7b0367d4b Merge remote-tracking branch 'origin/main' into upstream/route-outage-unavailable
# Conflicts:
#	docs/CURRENT-STATE.md
2026-11-09 08:14:35 -08:00
Sameh Khamis 2a26d13fff render: wind relief is the globe port's hillshade; the wind layer no longer reaches Cesium
The wind relief now asks the globe port for hillshade surface shading at
0.28 instead of building a globe material itself; the Cesium globe port
draws the same view-directed shading, over terrain normals or the globe's
curvature, and the unbound provider now lists surfaceShading. The wind
layer's canvas flow, bounds, imagery fade and render requests go through
the camera, frame and query ports, so src/layers/wind/rendering.js and
relief.js leave the Cesium allow list.

A refused shading request is taken back so it never shows after Wind is
off, and a camera height that is not a number falls back as before.

The application layers and standalone catalog entries no longer load the
unbound factories themselves: a viewer with no renderer bound
needs render/cesium/unbound loaded first. The contract and current-state
docs say what the Cesium adapter's fields and surface shading do now.
2026-11-09 08:13:04 -08:00
Said Turksever b4c03a1c0c Merge branch 'main' into german/vessel-callout-under-card 2026-11-09 15:50:25 +00:00
Said Turksever 9787d9c4cc Merge branch 'main' into german/transit-bikeshare-empty-state 2026-11-09 15:32:48 +00:00
Said Turksever cf05a29b7f Merge branch 'main' into feat/transit-more-cities 2026-11-09 15:20:12 +00:00
Sameh Khamis 4da477a654 feat(draw): hand one drawn area or line back to the application
createApplicationTools returns drawShape({ shape, signal }): it opens Draw
for one area or line and resolves with its Polygon or LineString without
placing a mark, or null when draw mode is left, the signal aborts, a newer
request replaces it, the pointer is held elsewhere or the tool goes. The
shape controls cannot change the asked-for shape, and a shape across the
antimeridian is refused as a row's actions refuse it and drawn again. It
also returns pointerFree, so an application's own click handlers yield to a
tool holding the pointer, as the layers' do.
2026-11-09 07:16:14 -08:00
Said Turksever c1ca0f489c Merge branch 'main' into feat/transit-more-cities 2026-11-09 15:13:18 +00:00
German Khokhlov c3738c0fdb docs(server): tighten the method-guard comments and changelog 2026-11-09 19:07:14 +04:00
Said Turksever cbb0a391f2 Merge branch 'main' into feat/transit-icon-heading 2026-11-09 15:06:36 +00:00
German Khokhlov ace88172d3 Merge branch 'main' into fix/api-method-guard 2026-11-09 18:51:02 +04:00
German Khokhlov 8b0b975e18 Merge branch 'main' into sv-locale 2026-11-09 18:45:01 +04:00
Denis Groshev 0fdde159cb Merge branch 'main' into denis/gev-news-layer
# Conflicts:
#	DATA_SOURCES.md
#	docs/CURRENT-STATE.md
#	src/data/local_data/natural_earth/README.md
#	src/i18n/same-as-english.json
#	style.css
2026-11-09 15:35:56 +01:00
German Khokhlov 9d7fe8fcaa Merge branch 'main' into feat/opensky-compress-cached-body 2026-11-09 18:30:32 +04:00
German Khokhlov 09bf01630b docs(server): tighten compression comments and docs 2026-11-09 18:14:30 +04:00
German Khokhlov be9c37bee2 Merge remote-tracking branch 'origin/main' into fix/perimeters-sub-acre-size 2026-11-09 17:07:05 +04:00
quanticsoul4772 a42b38c4b3 Merge branch 'main' into upstream/firms-age-rounding 2026-11-09 04:48:51 -08:00
quanticsoul4772 dbb082355a Merge branch 'main' into upstream/tools-heading-wrap 2026-11-09 04:47:58 -08:00
German Khokhlov da6b63b6fd docs(tools): tighten the heading-wrap changelog, comments and overview 2026-11-09 16:45:11 +04:00
Kaj Obst 6a6cee4c21 Merge remote-tracking branch 'origin/main' into sv-locale 2026-11-09 12:53:37 +01:00
Sameh Khamis 26633106fc Traffic surface keys and readiness through the globe port; draped lines fall back to overlay where the scene cannot drape
The traffic layer keys its cached road heights by the globe port's
surfaceVersion() and waits on isSettled('surface') instead of reading the
scene through render/cesium/surfaceState.js, which is gone. Heat-lines are
always asked for draped; the layer no longer checks whether the scene can
drape and drops them. The traffic layer and application/sources no longer
reach Cesium, and src/layers/traffic/rendering.js leaves the Cesium list.

Where the Cesium renderer cannot drape (no depth textures), its draw port
now draws every draped line over the surface, as the contract asks: along
the surface's curve between its positions, in its colour where the surface
hides it, hidden past the horizon (tested along its arc, shown in 2D). A
segmented line runs from its first shown segment to its last, in its style
colour. A line whose positions hold what they held takes a new colour in
place, so pulsing jam lines build nothing per frame; one that moves is
built anew alone.
2026-11-09 03:10:29 -08:00
Sameh Khamis f53f691a80 Ground snapping and mesh floor sampling through the renderer ports, off the Cesium list
src/services/groundSnap.js and src/services/meshFloorSampler.js no longer
reach Cesium. Whether the surface has streamed comes from the globe port
(the snap waits for the 'tiles' and 'surface' settle kinds; the sampler
runs only with the globe hidden and 'surface' settled), the camera height
gate from camera.pose(), heights from the query port, and the maths from
src/geo/ellipsoid.js. The raw exclusion path is gone: callers see through
their own draw sets by id. Cockpit's ground probe names the tracked
contact's icon and model sets, which the flights and military layers keep
on its entity record (groundSets), instead of the tracked holder object.

Probing is unchanged: at the caller's point, up to eight readings per cell
about 17 m apart, a read answering from the nearest one.

The application operations entry is now Cesium-free: a viewer with no
renderer bound needs ./render/cesium/unbound loaded first. Tests that used
to get the adapter's factories through ground snapping load it themselves.
2026-11-09 01:55:36 -08:00
Sameh Khamis 9d4e438e63 Merge branch 'sameh/renderer-transit' into sameh/renderer-seam
# Conflicts:
#	src/render/cesium/draw.test.mjs
2026-11-09 01:00:43 -08:00
Sameh Khamis 8bcaced6ad Take the input dispatcher off Cesium: pointer input from the renderer's input port, picks from the query port
The dispatcher now builds on renderer.input and the query port, with
positions as plain {x, y}. Its viewer access count is zero and it leaves
the Cesium allow-list. Layers that read the raw engine pick read the Hit,
drawHit or event.native instead, and pickRegistry's resolvePickId and
pickContact take a Hit, with the raw versions kept in the Cesium adapter.

rendererOf gains findInput, provideUnboundInput and provideNativeClick.
event.native carries the engine's pick, drill and pickWindow, and picks
through the follow helper happen inside it. An unbound input port
survives the viewer being bound until it is released.

The query port's pick memo is now per task rather than per frame,
because Cesium's own picks advance the frame number. A click on the sky
skips the depth pass when nothing is on the ray. Touch contact search
keeps its eight-deep drill in a 14x14 window.
2026-11-09 00:47:30 -08:00
Sameh Khamis 76b5d99e24 Keep each mesh floor reading at its point and answer from the nearest one
Keeping a cell's lowest reading let a street probe pull a vehicle on a viaduct
or bridge in the same cell down to street level. Readings now stay at the point
they were taken (up to eight per cell, about 17 m apart), a read answers from
the reading nearest the vehicle, and two readings within about 5 m keep the
lower.
2026-11-08 23:19:16 -08:00
Sameh Khamis 18a9e0470d Keep vehicles off rooftops: probe the mesh where the vehicle is and keep a cell's lowest reading
The rendered-mesh floor took one probe at each coarse cell's centre and kept it
for the session. A centre on a roof passed the +80 m DEM window and lifted every
vehicle in the cell to roof height (a Haymarket bus drew 23.5 m above the
street); a centre in the river put Red Line trains on the Longfellow Bridge
6-9 m under the deck. The sampler now probes at the caller's point, reads a
latched cell again at up to four points apart from each other, and the gate
keeps the lowest reading that passes.
2026-11-08 22:45:51 -08:00
Sameh Khamis 347427f83d Draw transit vehicles through the renderer ports, off the Cesium list
Transit drew its vehicles into two Cesium billboard collections and culled,
turned and floored them through the Cesium scene. It now draws them as two
draw-port icon sets, still and moving, registered with the sprite order by
set id in the same places. Each marker is a plain record; a frame writes the
changed ones in one upsert per set, and markers taken out in one task go in
one removal. Clicks read the draw-port hit.

Visibility uses the query port's horizon test and the frustum planes of the
camera port's pose. Icons stay turned in screen space by an exact projection
through the query port, the same answer the Cesium helper gave. The flat
globe is told from terrain by asking the height service once per surface
change; floors are read again when the answer flips. The mesh floor sampler
sees through the layer's sets by id. The camera pose and surface version are
read once per task.

The Cesium draw port now moves and turns an icon without restyling it. The
GL upload probe moves to src/render/cesium/uploadProbe.js, which the QA
scripts hand to the frame probe; the QA scripts read the billboards drawn for
each set.
2026-11-08 21:44:22 -08:00
Sameh Khamis 5b1920d65b Merge branch 'sameh/renderer-layer-wrappers-2' into sameh/renderer-seam
# Conflicts:
#	src/data/localGeojsonCore.js
#	src/render/cesiumAllowList.json
2026-11-08 19:49:29 -08:00
Sameh Khamis 5a6cf22be1 feat(cockpit): the owner flags load at startup from one generated 15 KB sheet; the loading status names the place packs while they load on first lookup 2026-11-08 19:35:30 -08:00
Sameh Khamis 63aa45c520 fix(cockpit): the sensor strip follows the view through a zoom step; the pre-load level test checks a worked number; the boundary gate's dependency-asset exemption is tested 2026-11-08 19:08:51 -08:00
Sameh Khamis b5fa86a20a Listen to the camera through the camera port in the transit layer
Transit lowered the one camera-change threshold every listener shared to
0.05, through a claim ledger. The camera port measures each listener
against its own threshold, so Transit now asks for 0.05 on its own port
listener, nobody else's trigger changes, and the ledger goes.

A new listener measures from the view at the next tick, so the layer looks
at the view once more after that tick, and a move made in between is not
missed. Disable always removes both subscriptions.

The billboards, the occluder and frustum checks and the frame probe still
drive Cesium, so the renderer stays on the Cesium list.
2026-11-08 19:00:37 -08:00
Sameh Khamis eb1969e874 Merge branch 'main' into feat/draw-mark-actions 2026-11-08 18:20:47 -08:00
Sameh Khamis 27847bd063 Draw rows take an application's own actions
createApplicationTools({ drawMarkActions }) adds an application's buttons to
the rows of drawn areas and lines. An action gets the shape's id, kind, name,
row title and [lon, lat] geometry, and what it returns or resolves to is a
note under the row. The standalone shell passes none, so the open-source
build is unchanged.
2026-11-08 18:12:32 -08:00
Sameh Khamis 577170ee8e fix(cockpit): the hop's circle runs through both ends, so it moves smoothly as a nearly opposite destination does and lands on it 2026-11-08 17:12:04 -08:00
Sameh Khamis 6be8af17f1 fix(cockpit): a new ride's TRACK ACQUIRED keeps its own time; an arrow during the ease back tilts on from the view; a site beyond the reach ends a focus; the horizon uses the WGS84 surface normal; a hop to the opposite side goes round the Earth; drop the unused in-frame listing 2026-11-08 17:12:04 -08:00
Denis Groshev 7b844792be docs(cockpit): describe orbit's Live Signals rows and site focus 2026-11-09 01:56:30 +01:00
Denis Groshev b18336d3d4 fix(cockpit): keep the orbital view on a double-click at a ground point
In the orbital view a double-click on a mapped ground point went on to
Cesium's own double-click, which tracks the picked entity and so ended the
view. The Cockpit's double-click routing now takes it in orbit: it keeps or
starts the focus on that point (a point beyond the reach is left unfocused
but still not tracked). A double-click anywhere else, one a tool owns, and
every one outside orbit go on to Cesium's as before, and stopping the
Cockpit still hands Cesium's handler back.
2026-11-09 01:56:30 +01:00
Denis Groshev dd063b0e83 docs(cockpit): describe the orbital view's ground focus 2026-11-09 01:56:30 +01:00
Sameh Khamis 4396ba4506 fix(cockpit): the pre-load serves every lead's centre line before the frame edges, starts a fresh memory and cancels the old map's requests on a new base map, and retries only what the scheduler dropped; the sensor waits for the eased view to reach the Earth 2026-11-08 16:43:59 -08:00