The voice card showed English for show_street_level failures the catalog
did not know: a missing key, a map or source that could not be switched on,
the layer, invalid coordinates, an imagery fallback and the filter clause.
They now translate like the other action errors (exact messages and
patterns in speech.js), in all twelve languages; the spoken line stays
English, and the filter clause names the filters as their chips do.
AIS Vessels are keyed by the id their live source gives, with the MMSI as an
attribute: an MMSI can be shared, spoofed or reused, so two vessels with one
MMSI are now two vessels. Looking a vessel up or selecting it by MMSI still
finds it.
A share link made while a vessel is selected opens that vessel. A UUID vessel
id travels as 16 bytes in a new thing field (13). A shared thing that is not
reporting now says so in a sentence per kind, with its id (ICAO, NORAD, MMSI
or vessel UUID) on a second line.
Main added the News layer at the same places: both layers are kept in the
layer names, panel order (News stays last of Events), standalone sources,
voice manifest, credits, DATA_SOURCES and the CURRENT-STATE table. News took
share-link token 00 first, so Shipwrecks moves to 01 (ledger, registry,
CURRENT-STATE and the token tests). The catalog now has 40 layers and the
share-link registry 38. Shipwreck strings are added to the new Hebrew
catalog; the other catalogs keep both sides' strings.
The trail no longer joins a day of history into one line. It lifts the pen
across a gap of more than 48 minutes, an implied speed over 1,500 kt, or a
report without altitude (a parked aircraft within 0.1 nm for under 3 h stays
joined), and every history point is kept as its own segment. History never
gets an invented altitude. The live end is the path the aircraft was drawn
along, thinned to its shape, so it no longer cuts corners through turns; a
late report trims what was drawn after it. Old segments are frozen in chunks,
so a 2,000-point trail costs about 0.1 ms a frame.
A tracked aircraft that misses an update shows STALE and is dimmed. It keeps
flying on its last speed and heading for five minutes (at most 1,500 kt),
then stops, dimmed, labelled SIGNAL LOST with the time since its last report,
and is kept for ten minutes after that report so the camera keeps its target.
Aircraft on or near known ground hold at their last report instead of
coasting. Military flights follow the same rules.
A FIRMS source may answer the 24 hours to a set time, naming its end as
`at` (epoch ms). The layer row then reads "24 h to MM-DD HH:MM UTC"
instead of "LIVE · updated ...", and getStats() reports `at`. A
snapshot without `at` (the trailing 24 hours to now, as the dev proxy
serves) keeps the LIVE label. Translated in every catalog.
- A pasted or start-up link opens its photos only when its restore's camera
landed: a drag or search during the restore flight keeps the camera.
- A posted view whose photo step was cancelled or superseded no longer closes
the viewer or flies; one that found a photo it could not load keeps the error.
- openNearest gains `replace` (keep the open photo while it looks, close it
only when nothing opens, so EXPAND stays) and `proceed()` (asked before a
found photo loads); the action uses both, so a navigation, a gesture or a
hiding mode during the lookup loads no billed panorama.
- Mapillary's timeout message is a msg() string with all eleven translations.
Tracking a civil flight asks Planespotters for that aircraft's photo, once
per aircraft, straight from the browser. The CONTEXT panel's CONTACTS view
shows it under the flight's name with the photographer's credit, as a plain
link to the photo's page. Only images on plnspttrs.net and pages on
www.planespotters.net are ever shown or linked. Military aircraft and a
converted TR-3B are never looked up.
Flight lookups (type, route, photo) whose source failed temporarily are
asked again after a 60-second cool-down; an answer, found or not, and a
permanent refusal stay final for the session. A route belongs to the
callsign it was looked up for, so a callsign change drops the old route.
Browser QA scripts that track a flight answer the photo lookup themselves,
so they never call the third party.
The orbital Context card is gone and the Contact card stays hidden in orbit
again. Live Signals page 1 had nothing in orbit but TRACK ACQUIRED, because
orbit feeds no Contacts snapshot; it now lists what is around the
satellite, built the way the aircraft rows are, five rows with stable keys
rebuilt once a second. Rows already shown keep their places while they
still qualify, so a site passing under a low orbit is not pulled from under
the pointer.
Site rows come from the Mapped Installations layer (getNearby, asked only
as far as the reach extends) and focus their site, or release it on the
focused site's row, which reads as the subject does. A site the layer drops
during its frequent reloads stays listed for 10 s, since sites do not move.
With the layer off nothing is listed and a SITES STANDBY row says why.
Satellite rows come from the satellites layer's bounded nearest query,
measured from the satellite itself, and ride the satellite; RETURN goes
back to the one before, skipping one that has left the catalogue. While
the camera hops to a new satellite only TRACK ACQUIRED and RETURN show, so
nothing is measured from the old position. An arrow pressed while a focus
eases back takes the arrows' own clock. Site and satellite rows name their
own actions.
In the satellite orbital view a single click on a mapped ground point (a
ground point of a layer that is on, such as a Mapped Installations site, a
fire or a local data pack feature) keeps the camera on it. Each frame the
look is aimed from the satellite's position to the point's Earth-fixed
position in the track-up nadir frame the arrows tilt, so the point stays
at the centre as the satellite moves. The swing onto the point, or between
points, uses the arrows' easing on a slower clock and then holds the point
exactly; reduced motion cuts.
A click elsewhere, FOCUS on the focused point, NADIR, Home or 0 ends the
focus and the view eases back to nadir; an arrow ends it and tilts on from
where the view is. The focus also ends, easing back, when the point leaves
the ±45° reach or the satellite's horizon, when its layer is turned off or
its record is dropped, and with the view. While focused the readout gives
the single off-nadir angle to the point (OFF-NADIR 23.4°), names it in a
polite live region, and the swath reads approximate as for a tilt. Clicks
still reach Cesium's own handler and never untrack the satellite; a click
a tool owns is ignored.
Under the readout, IN REACH lists the mapped points facing the satellite
that are within the reach or in the frame, nearest to nadir first and at
most 12, rebuilt once a second. A row opens the point's position, source
and OpenStreetMap tags (or its layer's properties); FOCUS focuses it,
switches to it, or ends the focus held on it, and is unavailable for a
point in frame but beyond the reach.
An imaging satellite with a known sensor can now zoom past 8x, up to 128x,
as far as the view stays at least as wide as the sensor's narrowest
standard swath at its live altitude; only swaths confirmed on a cited page
open those steps. The top step follows the altitude and window shape and
steps back when it falls below the zoom shown.
The view draws the sensor's swath to scale along the ground track with a
SENSOR SWATH readout (approximate off nadir), and a SENSOR button zooms to
exactly that width when it lies in range at nadir. From 16x the imagery
tiles the view will need 5 to 20 s ahead along the ground track are
pre-loaded at the matching level. The mouse wheel steps the zoom one notch
at a time, and the identity line shows how old the TLE is. The sensor
figures come from a new bundled pack of 46 Earth-observation platforms,
each value cited to its operator or agency, with its own data credit.
With a satellite tracked and no aircraft tracked, Cockpit can ride the
satellite. Entry needs only the Satellites layer; debris can be tracked but
not entered, and voice stays aircraft-only. Double-clicking the tracked
satellite or the entry buttons (reading ORBIT) enter it.
The camera sits on the satellite's per-frame SGP4 position and looks
straight down, turned to the ground track (north-up for a satellite with
none). The optical zoom steps 1x to 8x with a focus pull, the arrows tilt
the view up to 45 degrees off nadir, and Home or 0 returns to nadir. Off
nadir the tilt reads its total angle first and the swath readout becomes an
approximation marked with ≈. While in orbit the map leases flat Esri
imagery, the cloud pass stays off and the view opens in the optical style.
The orbital HUD names the satellite with its owner's flag (from the
flag-icons package, loaded per country) or an organisation badge, its
operator, class, NORAD and COSPAR ids and TLE epoch with the element lines
on request, altitude, orbital speed and the sub-satellite point. CURRENTLY
OVER names the country and its first-level division, or the sea, and from
8x the most prominent populated place nearby, looked up offline from the
bundled Natural Earth packs (populated places are a new pack). The
satellites layer hides the ridden satellite's own marks, dims the other
orbit rings and ignores scene clicks and Escape while held. Exit restores
the camera's field of view and the satellite's follow camera.
C no longer enters or leaves Cockpit, bridge or orbit: it is left to the
app-wide CCTV shortcut, and Escape or the exit button leave first person.
The satellites layer now sorts every object into Stations, Imaging,
Telecom, Starlink, Probes or Debris, each with a chip and a live count on
the layer row. Stations and Imaging show by default; the Starlink chip is
the former DENSE catalog switch. Hidden classes keep their points, so a
toggle needs no reload, and they leave the detection overlay and the voice
position lists.
A class comes, strongest evidence first, from CelesTrak SATCAT (object type
and status, served by a new /api/celestrak-satcat/<group> proxy route and
cached for a day), the bundled UCS Satellite Database pack (operator, owner
country and purpose), name patterns for later launches, and the CelesTrak
group. The core catalog also reads the resource, weather, planet, sar and
science groups. Payloads with no evidence of life launched 20 or more years
ago are filed as debris. The UCS pack, its build script and its data credit
are added.
With no aircraft tracked, Cockpit can ride the selected AIS vessel. Entry
needs only Live AIS Vessels and a selected vessel; C, double-click and the
entry buttons (reading BRIDGE with a ship icon) enter it, while voice stays
aircraft-only.
The eye sits on the AIS position at a representative bridge height for the
vessel's type family, looks along true heading and moves along course over
ground. The last fix is dead-reckoned for up to 180 s between the layer's
refreshes, and on rivers and lakes the waterline is read from the rendered
surface around the ship rather than the geoid.
The bridge HUD shows speed and course over ground, a straight heading
tape, window mullions, the AIS destination as a reported voyage and a
heading-up radar of nearby ships (3 to 24 NM). The arrow keys look around,
Home or 0 looks ahead again. The vessel layer hides the ridden ship's
sprite and card, ignores scene clicks while held, and returns the camera
to the vessel's map view on exit.
createTrafficSource({ roadModes }) lets a host offer a subset of the TomTom,
OSM and Hybrid road modes (all three by default). Without OSM the layer never
draws simulated roads, and a single mode shows no road chip.
While flow is live the Street Traffic row offers Lines (every road with flow
as a steady green/amber/red line, from the heat-line renderer) and Dots (the
moving dots), saved in layer state and share links. Defaults: Lines off,
Dots on.
Review fixes on top of #1578:
- Exiting Space Missions cancels the layer's own camera flights again (entry,
roster preview, mission focus); only a flight navigation started after
releaseCameraOwnership() runs on.
- A failed first index load says so: "Space Missions unavailable: the
mission index could not load. Try again later." on both the Context and
Data Layers routes, instead of a generic transition toast. Translated.
- Regression tests for both; docs and changelog describe the real feedback.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Street Level: keep the PR's billedPerImage contract note beside main's keyReady, and both sides' layer tests (armed OPEN, failing source) and (keyless default lighting).
- Keep the open card across a widened reload only when its index still
holds the same report; the server may answer a pinned version with newer
bytes.
- Narrowing to a window the loaded data already covers clears a failed
wider reload, so the row no longer stays in error.
- Label the every-age option "All" (contextual) so the six-option switch
fits the row in every locale; tooltip and info line keep "All markers".
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Review fixes on top of #1528:
- Narrowing the age window only removes markers; a product loaded with a
narrower window is reloaded when the window widens again. Fixes markers
missing after 7d -> 1d -> 7d and avoids reparsing every KMZ on narrowing.
- A wider window over the same edition keeps the open report card.
- Date-only event dates cover their whole UTC day, so 1d still shows
yesterday's reports.
- The age options are one labelled "Event age" radio switch (row
`segmented` control, as FIRMS confidence) instead of toggle chips mixed
with the product chips.
- Un-nest the per-product age test; QA compares data-source counts with the
live defaults instead of a hard-coded 2.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Wildlife Sightings (#1591) published share token 9, so News takes the
next free token, 00. The token tests read the ledger before both where
they were written against it, and the README counts both layers.
German Khokhlov