The tracked-model checks zoom the follow camera to within 2 km of the plane,
and the grounded-model check parks the camera 2 km above the planes instead
of 8 km, since models now draw only within 3 km.
A selected plane is drawn by its own model, and its fleet model was let go once
that model drew. Deselecting showed the icon at once, and the icon stayed for
about a second while a new fleet model loaded.
The fleet model now stays loaded but hidden while the plane is selected, kept
where the plane is. Deselecting hands the plane back to it in the same frame,
and the icon shows only when there is no loaded fleet model. Military aircraft
share this code. Vessels never swap models on selection, so they had no flash.
An aircraft, vessel, transit or rail vehicle now draws as its 3D model only
when it is within 3 km of the camera, and as its icon farther away. A model
already drawn is kept out to 3.6 km, so a vehicle on the edge does not flicker.
Proximity and All use the same distance and still differ by how many models
they allow (150 and 350). Models are drawn at their true size: the minimum
pixel size that inflated distant models is gone.
The camera altitude above which no model is considered is now the highest
aircraft the layers draw (30 km) plus the 3.6 km, so a camera high above the
ground still models an aircraft close to it. Cockpit's aircraft silhouettes
keep their own 150/185 km and 400/450 km bands, since they are icons.
Both layers registered their time coverage with the page's world clock when
created and never unregistered it, so an application destroyed and started
again kept each old layer, and its scene and tiles, reachable through the clock.
They now unregister on destroy and register again on init, as earthquakes do.
Cesium switches the map stacks through its globe port, as any renderer
does, rather than through a map engine of its own. Every route keeps its
behaviour:
- Google 3D turned off is kept hidden, and shown again without loading it
anew; the key route's tiles take clamped marks, as the token routes' do.
- Esri goes to its deepest level (23); its "Map data not yet available"
picture is a missing tile, so the parent's imagery stays.
- Cesium ion's world imagery is Bing over HTTPS on any page, with ion's
credits; a token ion refuses refuses the switch, as before.
- Keyless terrain that does not answer is the flat ellipsoid, tried again
behind it; world terrain asks ion first, as before.
- window.__godsEyeView.tileset is the Cesium photoreal tileset.
createApplicationTools took the Stories page as the open_stories action
even when the app's voice options gave its own. voice.openStories now
takes precedence, spoken or typed, with the Stories page as the default.
- A route globe that cannot draw tells the card, which shows another view.
- A card opened before the model set has loaded waits for that load.
- The model turns at the same rate on any display, and holds still under
reduced motion.
- A hidden cockpit view stops drawing.
- The route plane keeps the craft's latest position through the fly-in.
- Metric altitude graphs keep main's 0.5% change threshold.
Co-authored-by: Manjunath Paparaju <[email protected]>
- The route globe, turning model and cockpit view are the renderer's: the
Cesium plugin hands them over as its `cardPreviews` application hook
(src/render/cesium/cardPreviews.js), and the card's tiles keep only the
words, figures and HUD laid over them. Nothing in the UI reaches Cesium,
and a renderer without the hook leaves the card its photo and figures.
- The turning model is the fleet model the globe draws for the aircraft's
type, from the set loaded at startup, so opening a card fetches nothing.
The flights layer's record now carries the type code and emitter category
that pick it.
- The photo comes from the item's own layer: the flights layer's
Planespotters photo for the plane it tracks, and the vessels layer's Open
Vessel Photos photo for the vessel selected, with its credit. It no longer
waits for Contacts to follow the same aircraft.
- The satellite models are left out: the card shows a satellite's ground
view and graphs its altitude and speed.
- The route globe's airport codes are drawn into its own small scene, the
compass reads its course in the active language, the callouts no longer
speak to screen readers every six seconds, and figures use the app's
number format. Esri's tile address and credit live in one place.
Co-authored-by: Manjunath Paparaju <[email protected]>
The card's hero tile now previews what was picked. A flight shows its
photo when Contacts has one, its route on a small globe from origin to
destination with the plane on it, its 3D model turning with callouts of
what can be worked out about the flight (phase, flight level, Mach, squawk,
signal age), and the view ahead from its cockpit with speed and altitude
tapes. The model and the cockpit view take turns, the route hands over to
the cockpit view after twenty seconds, and a switch picks one and holds it.
Under reduced motion nothing swaps by itself.
A satellite shows the ground beneath it and graphs its altitude and speed.
Each preview draws in a small scene of its own and frees its graphics
context as it closes, so flicking through cards never pushes out the
globe's.
Co-authored-by: Sameh Khamis <[email protected]>
- Following comes only from the camera's own follow, never claimed ahead
of it; vessels, which the camera does not follow, are flown to.
- A drag or a long press never selects, and only a clean click on open map
closes the card; a card painted on the overlay is not open map.
- Closing the card lets go through its own layer only, as the person's
action, leaving other layers' selections alone.
- Radio's panel, with its local SDR tuner, shows whether or not the Radio
layer is on; Contacts' Cockpit entry hides only while the card offers its
own.
- Expanded Context keeps the credits beside it right to left and with the
minimal HUD.
- Context counts as closed until its panel says it is open; closed, the
card's refresh and the view reading pause, and opening reads the view.
- The five-minute re-read fetches again past the caches, keeps what is
shown meanwhile, and an empty brief is not kept.
Co-authored-by: Manjunath Paparaju <[email protected]>
Context no longer reaches into Cesium or the viewer: the view it describes
comes from the camera port (pose, view rectangle, moveEnd and changed), a
fly-to goes through flyToBounds, and clicks come from the input dispatcher,
which picks each click once for every layer and skips it while a tool holds
the pointer. The card says Following while the camera follows its own item,
as the follow's key names it (src/data/followed.js), whoever started the
follow.
Co-authored-by: Manjunath Paparaju <[email protected]>
- Closed, the panel mounts neither the card nor the view summary, so it
reads no layer records and fetches nothing.
- The weather and news brief goes through the app's regional service
(endpoint overrides, lifetime signal), and a failed read is not kept.
- A spot that stays put reads its brief and hazards again every five
minutes; turning FIRMS on or off updates the hazards at once.
- Enter Cockpit is offered only for layers the tracking action can follow
(not local ADS-B), and a failed attempt leaves the card as it is; a
satellite ride gives up when the card changes or Context goes away.
- Closing the card lets go of the camera when it follows the card's item.
- Map picks leave Context alone while Cockpit runs.
- Expanded Context sits on the left edge in right-to-left languages, lets
go on the phone layout or in Cockpit, and a remount starts collapsed
without leftover tab classes.
- The Inspector and Properties tabs have tab ids, panels and arrow keys.
- Town lookups run again after zooming back in, the camera preview shows
facts only for its own camera, route places wait for the same route, and
acres and heights use the app's number format.
- The omnibar gets no runner from a voice session already disposed.
Co-authored-by: Manjunath Paparaju <[email protected]>
While a layer they act on is on, the Visual panel's detection overlay and
3D aircraft controls move into their tab in Context, beside what they
affect; Cockpit still takes them first, and they go back to Visual when the
layer goes off.
Co-authored-by: Sameh Khamis <[email protected]>
The Context panel's main tab shows the mode row again, with Contacts
(nearby sites search, the TR-3B toggle and the Awareness list) and Space
Missions (the roster and launch replay); only the Properties tab hides
them. Radio shows while its layer is on, and turning Radio or Launches on
opens Context. When Contacts follows the aircraft the card shows, its list
sits inside the card in a compact form and the card leaves out the flights
and vessels Contacts already lists. The card's Enter Cockpit replaces the
Contacts button, and leaving the cockpit returns focus to it.
Co-authored-by: Sameh Khamis <[email protected]>
Tracking set by another control or by voice for another craft no longer
shows Following on the open card: the card remembers the entity its own
pick started tracking, and any other tracked entity clears Following.
Co-authored-by: Manjunath Paparaju <[email protected]>
A share link or restored view moves the camera without a moveEnd, and the
once-a-second read of camera changes dropped the last one, so Context named
a point from the fly-in. A last read now follows the final change.
Co-authored-by: Manjunath Paparaju <[email protected]>
FIRMS needs a key the browser cannot see. Without one the proxy answers
503, so Context no longer asks for fire hits unless the FIRMS layer is on.
Co-authored-by: Manjunath Paparaju <[email protected]>
Expanded, Context covers the right edge from top to bottom, so the credit
row now ends short of it. The credit model knows the expanded column and
pins the gap, the header test lists the new search and expand buttons, and
the controls tolerate operations without an annotation resolver.
Co-authored-by: Manjunath Paparaju <[email protected]>
The shell passes the ground picker to the click bridge, so the UI shell no
longer pulls in the annotation and search stack. Context's new modules are
owned by the packages that import them and formatted with the rest.
Co-authored-by: Manjunath Paparaju <[email protected]>
The shell connects the layer store that Context and the omnibar share,
installs the click-to-Context bridge and removes both on dispose. Voice
sessions hand their command runner to the same store, and the stylesheet
imports the Context styles.
Co-authored-by: Sameh Khamis <[email protected]>
A transit vehicle picked on the map now finds its record in Context (the
click carries the feed and vehicle key), so the card shows its operator,
place, route, report age and the operator's last reported state in plain
words. The layer card breaks transit in view down by motion (moving,
stopped, waiting for an update, no recent fix), mode, operator, last
reported state and crowding where the feed has it; vehicle-position feeds
carry no timetable, so early or late is not shown. Rows in the in-view
list carry a motion icon.
- Context reads what is under the pointer when the button goes down. The
flights layer acts on the click first and swaps the plane's icon for its
model, so a pick at click time found a different plane behind it.
- For flights, military, satellites and live vessels, whose own click
already follows the craft, Context no longer starts a second follow: the
flights layer read that as a click on empty map and let go. The card is
marked as following once the camera has taken hold.
- The card's following state resets when the camera stops following, so
picking the same item again follows it again.
- A click on open ground, sea, sky or the photorealistic ground clears the
card.
Clicking anything a layer can identify opens one card in Context: a hero
tile (route globe and 3D model for a flight, the camera for CCTV, headline
figures otherwise), its facts, actions with Cockpit or the orbital view as
the primary one, and a standard set of nearby blocks (weather and local
time, flights, vessels, hazards, alerts) within one radius the user sets.
Aircraft show altitude as a graph. Things that move are followed when
picked, and a card closes when its layer is turned off.
With nothing selected the panel describes the view: the layers that are on
with a breakdown of what each holds, the camera's height, what is in view,
then time, weather and local news. From far out it shows worldwide counts
per layer. A search field in the header narrows whatever the panel shows.
Prototype. Context reads weather and hazard feeds while its panel is closed,
the two 3D previews on a flight card repaint continuously, Follow can show
pressed after tracking has ended elsewhere, and most new strings are fixed
English. Same-named sites are told apart by position, not by a stable id.
A resumed hold waited only its rest unless the layer gave a media gate,
and only trimmed clips have one, so an untrimmed clip started again (as
on Gyirong) was cut short. The layer now says when a run going on from a
seek started its clip again, and the hold then plays out as from its
start: through the media gate when there is one, else for the whole hold.
For a shot whose path runs during the camera move, a seek in the hold
showed its evidence sequence at the start and a resumed run jumped to
its end. The sequence now stands where its own clock has it (after the
clip and its exit), and a resumed run carries on from there.
The corner controls are the ACTIVE STYLE readout and any element marked
with data-stories-corner, looked for again for 20 s after Stories mounts,
in place of an element id this app never has.