Files
gods-eye-view/changelog.d/1767-space-stations.md
T
Denis Groshev dad59fabbf Orbital label clicks, the Sun's "Underneath", zh-Hant 天後側
- The Cockpit's orbital view counts a site's own label as its own, not
  another layer's card, so clicking it focuses the site again; the test
  now sets the overlay hit test the way the world overlay does.
- The ISS Sun position under the station is "Underneath", with its own
  translations; "Below" stays the ground under a satellite.
- OpenCC turns 问天后侧 into 問天后側 ("empress"); a correction makes it 後.
- The changelog says a label takes the click from a vehicle drawn under it.
2026-11-19 17:07:49 +01:00

42 lines
2.8 KiB
Markdown

- Draw the ISS as NASA's 3D model of the current station when the camera is
near it, its moving parts following computed rules: the solar arrays and
radiators by the Sun, the Ku-band dishes toward the relay satellites, the
robotic arms in an illustrative sway. The model draws through the renderer
contract, whose model items gain `nodes` for a model's moving joints
(Itallo Brandão, @IMBrandao; Denis Groshev, @ZloyS, #1767).
- Draw China's Tiangong station as a 3D model up close, the second station
after the ISS: an original model of the T configuration with a Shenzhou
forward and nadir and a Tianzhou aft, its wings following the Sun, its
antenna aimed at the Tianlian relay satellites and its two arms swaying for
illustration (computed values; China publishes no telemetry). The model
stands in for the dots of the entries docked to it (Denis Groshev, @ZloyS,
#1767).
- Add a STATION section to Context while a space station is selected on the
map: Automatic says where the moving parts' angles come from, Manual offers
Sun positions, array and radiator folding as a labelled demonstration, dish
aim and the arms joint by joint, and Zoom brings the camera to the station.
Selecting a module or a docked vehicle offers it as selecting the station
does (Itallo Brandão, @IMBrandao; Denis Groshev, @ZloyS, #1767).
- Let the ISS model's solar arrays, radiators and Ku-band dish take their
real angles from NASA's public ISSLive telemetry. Off by default: set
`ISS_TELEMETRY_ENABLED=1` and the server relays the feed over one
connection, open only while the model is on screen; without signal the
joints keep their computed rules (Denis Groshev, @ZloyS; Kevin Rajan,
@kvnloo, #1767).
- Add a LIVE section to Context while the ISS is selected: NASA's two live
streams (exterior cameras; live video with space-to-ground audio), stepped
with arrows, in YouTube's embedded player. Nothing loads until you press
Play, under a line saying YouTube sees your IP address, and collapsing the
section stops it. In the Cockpit the same stream is the briefing's fourth
page, LIVE (Itallo Brandão, @IMBrandao; Denis Groshev, @ZloyS, #1767).
- Ride a space station in the Cockpit from views on its model instead of
the straight-down picture: Nauka, Zarya, Poisk, the Cupola, Kibo and a
docked vehicle on the ISS; Tianhe, Wentian, Mengtian and a docked vehicle
on Tiangong. Two arrows step through them, the readout describes the module
each view is from, and leaving selects the station (Denis Groshev, @ZloyS,
#1767).
- Let a click on a mapped installation's label box select the site, as a
click on its 7 px dot does: from orbit the label is what a click lands on.
As with every card on top, the label takes the click from an aircraft or
vessel drawn under it (Denis Groshev, @ZloyS, #1767).