Commit Graph
123 Commits
Author SHA1 Message Date
Sameh Khamis 9bce41d3c6 Read the mesh floor where transit vehicles and grounded flights actually are
With readings kept per point, the floor a vehicle gets depends on which point
is probed and where it is read. Transit offered the sampler the first point of
each vehicle's path in a cell, usually its oldest fix there, so a vehicle that
stayed in one cell never had its current spot probed. It now offers the latest
point of the path in each cell, and the newest fix in the vehicle's own cell
(the selected vehicle's history is walked newest first).

The grounded-flight display clamp read the floor at its sticky cell's centre,
which now answers from the reading nearest the centre, not the contact. It
reads at the contact's own position, held inside the sticky cell so boundary
hysteresis still applies.
2026-11-09 14:51:35 -08:00
Sameh Khamis 04b8c856ad Keep vehicles off rooftops and bridge decks: probe the mesh where the vehicle is
On the photoreal stack the rendered-mesh floor took one probe at each coarse
cell's centre (0.001 degrees) and kept it for the session. A centre on a roof
passed the +80 m DEM window and lifted every vehicle in the cell to roof height
(a Haymarket bus drew 23.5 m above the street, on the garage roof); a centre in
the river put Red Line trains on the Longfellow Bridge 6-9 m under the deck.

The sampler now probes at the caller's point. A cell with a reading is probed
again only at spots about 17 m apart from earlier ones, eight at most, and a
spot refused only because the cell's DEM prior was cold is tried again later.
The floor keeps each reading that passes the gate at the point it was taken
(two within about 5 m keep the lower; sixteen at most per cell) and answers a
read from the reading nearest the asked point, so a viaduct and the street
beside it in one cell keep their own heights.
2026-11-09 14:51:35 -08:00
Sameh Khamis c073064507 Stack sprite layers by draw order, flights on top
Each sprite layer's icon or dot set is now made at a draw order taken
from SPRITE_LAYER_ORDER through the renderer's per-set drawOrder:
flights over military, vessels, directions, transit, bikeshare, FIRMS
and CCTV, whichever layer was turned on first. Picks name the topmost
first. The orders are negative, so selection highlights, route
endpoints, the tracked plane and every other set at the default order
still draw over all sprite layers, as they did before.

The raise-to-top restorer, the sprite registry and the primitive-name
lookups are gone, which takes spriteOrder.js off the viewer-access list.
Before, the restorer raised the layers to the bottom of the scene in the
order they were enabled, so flights usually ended up under the others.
2026-11-09 14:32:50 -08:00
Sameh Khamis f53f691a80 Ground snapping and mesh floor sampling through the renderer ports, off the Cesium list
src/services/groundSnap.js and src/services/meshFloorSampler.js no longer
reach Cesium. Whether the surface has streamed comes from the globe port
(the snap waits for the 'tiles' and 'surface' settle kinds; the sampler
runs only with the globe hidden and 'surface' settled), the camera height
gate from camera.pose(), heights from the query port, and the maths from
src/geo/ellipsoid.js. The raw exclusion path is gone: callers see through
their own draw sets by id. Cockpit's ground probe names the tracked
contact's icon and model sets, which the flights and military layers keep
on its entity record (groundSets), instead of the tracked holder object.

Probing is unchanged: at the caller's point, up to eight readings per cell
about 17 m apart, a read answering from the nearest one.

The application operations entry is now Cesium-free: a viewer with no
renderer bound needs ./render/cesium/unbound loaded first. Tests that used
to get the adapter's factories through ground snapping load it themselves.
2026-11-09 01:55:36 -08:00
Sameh Khamis 8bcaced6ad Take the input dispatcher off Cesium: pointer input from the renderer's input port, picks from the query port
The dispatcher now builds on renderer.input and the query port, with
positions as plain {x, y}. Its viewer access count is zero and it leaves
the Cesium allow-list. Layers that read the raw engine pick read the Hit,
drawHit or event.native instead, and pickRegistry's resolvePickId and
pickContact take a Hit, with the raw versions kept in the Cesium adapter.

rendererOf gains findInput, provideUnboundInput and provideNativeClick.
event.native carries the engine's pick, drill and pickWindow, and picks
through the follow helper happen inside it. An unbound input port
survives the viewer being bound until it is released.

The query port's pick memo is now per task rather than per frame,
because Cesium's own picks advance the frame number. A click on the sky
skips the depth pass when nothing is on the ray. Touch contact search
keeps its eight-deep drill in a 14x14 window.
2026-11-09 00:47:30 -08:00
Sameh Khamis 84f3476dd3 Merge remote-tracking branch 'origin/main' into sameh/world-clock
# Conflicts:
#	index.html
#	scripts/package-boundaries.json
#	src/app/scene.js
#	src/i18n/locales/ar.json
#	src/i18n/locales/de.json
#	src/i18n/locales/es.json
#	src/i18n/locales/fr.json
#	src/i18n/locales/it.json
#	src/i18n/locales/ja.json
#	src/i18n/locales/pt.json
#	src/i18n/locales/ru.json
#	src/i18n/locales/uk.json
#	src/i18n/locales/zh-CN.json
#	src/i18n/locales/zh-Hant.json
#	src/layers/launches/ingestion.js
2026-11-08 12:13:41 -08:00
Sameh Khamis 5370feb825 Report model load failures to model sets, and bound the tracked model's retries again
The renderer contract gains an optional event on model draw sets,
`on('loadFailed', (id, message) => ...)`, beside `ready`: a model's url
failed to load, once per failed load. The item stays in the set drawing
what it drew before; removing it and adding it again tries at once. A
renderer that cannot tell a failure may never fire it.

The Cesium draw port fires it once Cesium is done with the frame it
raised the error in, and not for a load that was superseded or whose item
went. The stub fails urls under `stub-fail:`, telling each load once. A
conformance check (`draw.models.loadFailed`) runs on both, with a model
url the dev server does not serve for Cesium.

The flights and military layers use it in place of rewriting every
unloaded model every 5 s. A fleet model whose load failed is removed and
added again 5 s later. The tracked model gets back its per-selection
budget: a failed load is let go and tried again 1.5 s later, and after
three failures the contact stays 2D until another is selected, as
before the models moved onto the draw port. A good load retires the
budget, and a model that loads after all is kept.
2026-11-07 19:44:15 -08:00
Sameh Khamis 23d56f8393 Move the flights and military layers onto the renderer ports
The flights and military layers now reach the renderer only through its
ports: motion, queries, state, tracking, enrichment, evidence and policy
read the camera pose, project through the query port, request and
suspend frames through the frame port, and key per-frame caches on the
frames drawn rather than the scene's frame number. Policy is plain data,
the enrichment view test is pose-based, and the tracked aircraft is an
icon in a draw-port set with a plain holder standing in for the entity
that Cockpit, the tracked card and share links read.

The mesh floor sampler can sample through the query port, excluding
named draw sets, and both layers use it that way. A pick of another
layer's tracked icon is never taken for one of a layer's own contacts.

Twelve layer files leave the Cesium allow-list.
2026-11-07 18:49:23 -08:00
Sameh Khamis abe9f97768 Draw Flights and Military 3D models through draw-port model sets
The two aircraft layers' fleet and tracked models are now draw-port
models sets made each layer lifetime, re-posed and restyled in place,
instead of Cesium models in a collection of their own. Model records are
plain data; picks name the set and the contact, readiness comes from the
set's ready event, the IR boost restyles in place (unlit, white tint,
full blend), and the drawn scale comes from the camera pose and pixel
floor. Fleet writes go out together at the end of each tick, before the
icons they replace, and a failed write hands the contacts back to their
icons. A model that has not loaded is rewritten every few seconds so the
renderer can retry it, which replaces the tracked model's load-failure
budget. Models load off the tile-contended job queue, as before.

aircraftModelLayer.js, modelRecord.js and the flights and military
lifecycle and testing files, plus flights rendering.js, come off the
Cesium allow-list.
2026-11-07 17:10:38 -08:00
Sameh Khamis eed3b83858 Compute aircraft model anchors and drawn scale without Cesium
Model visual anchors now turn glTF axes into the placed frame with plain
math, and a new modelDrawnScale reproduces the scale a model is drawn at
under its pixel floor from the camera pose and viewport, so callers no
longer need a Cesium model's computedScale. modelVisualAnchor.js comes
off the Cesium allow-list.
2026-11-07 17:10:38 -08:00
Sameh Khamis 8cefc8cc4a Draw contact trails through the draw port
The shared trail renderer draws a trail's history and its live head as
lines in a draw-port set, geodesic for the history and straight for the
head, each dimmed behind the surface in its depth-fail colour, and
leaves the Cesium allow-list. The flights and military trail heads are
drawn through the trail each frame from the frame port instead of
entity callbacks, and the local ADS-B head uses the same head line. A
head given while its trail is hidden waits until the trail shows.

Geodesic lines are cut a step a degree of arc, with at least 64 steps
over the line, so a long trail of short legs costs its positions rather
than 64 vertices a leg.
2026-11-07 07:39:58 -08:00
Sameh Khamis b1333d8d93 Read the camera through its port when applying military snapshots
The military snapshot renderer took the camera's ground point from the
Cesium camera, built fix positions and history entries with Cesium types,
re-floored stale grounded contacts with Cesium positions and handed the
scene to the mesh floor sampler itself. It now reads the ground point from
the camera port's pose, compares fix times in whole milliseconds as before,
and leaves positions, the stale re-floor and the mesh floor probe to the
military motion part. The file no longer touches Cesium and leaves the
allow-list.

The fix position, copy and history entry helpers the flights and military
motion parts both need now live once in the aircraft motion regime module.
2026-11-07 04:49:47 -08:00
Sameh Khamis 436b110547 Read the camera through its port when applying flight snapshots
The flights snapshot renderer took the camera's ground point from the
Cesium camera, built fix positions and history entries with Cesium types,
and handed the scene to the mesh floor sampler itself. It now reads the
ground point from the camera port's pose, asks the flights motion part for
fix positions, copies and history entries, compares fix times in whole
milliseconds as before, and lets the rendering part sample the mesh floor.
The file no longer touches Cesium and leaves the allow-list.
2026-11-07 04:25:24 -08:00
Sameh Khamis dbd6363e43 Draw the aircraft fleet icons through the draw port
The civil flights and military layers now draw their contacts as one GPU
icon set each from the renderer's draw port instead of a custom primitive.
Each contact is an icon item whose motion is the dead reckoning the layer
plans (interpolation between fixes, warm-up and coast arcs, or a hold),
with its nose gliding onto a new course at the fleet's slew cap. A
contact's item is replanned when its motion runs out, grounded contacts
are pinned with held motion, and focus de-emphasis is written per item.
The near/far image switch follows the renderer's pixel ratio, and writes
made during a fleet tick reach the set before that frame draws.

The aircraft icon layer and the flights icon part no longer touch Cesium
and leave the allow-list. Clicks resolve the draw port's pick ids as well
as the ones the tracked model and entities still carry, so selection,
follow and share-follow work as before.
2026-11-07 04:25:24 -08:00
Sameh Khamis ed6e21b6f3 Ask the flight feed around the camera port's ground point, and take the flights controller off the Cesium list
The flights controller reads the camera's longitude and latitude from the
renderer's camera port instead of the Cesium camera, and asks for no area
when the pose has no ground point or the viewer is gone. It no longer
imports Cesium or reads the viewer's camera, so it leaves the allow-list.
The flights entry already loads the Cesium camera factory for viewers with
no renderer bound.
2026-11-07 02:36:39 -08:00
Sameh Khamis e3a850bc9c Follow aircraft and satellites through the camera port
Flights and military follow their tracked aircraft with an
entityFollowTarget: framed in ENU from viewFrom, never closer than
150 m, presentation read from the drawn entity's record. Satellites
follow in Cesium's autodetect frame. The layers' own framing
(applyTrackedCameraFrame) goes; the port's follow has the same
close-range rules, and trackedCamera.js no longer imports Cesium.

The port's helper entity draws nothing: its point's outline is
transparent too, and click and voice picks of it count as picks of
the target's drawn entity. The fake camera binder follows when the
fake has Cesium's entity tracking.
2026-11-06 16:10:48 -08:00
Sameh Khamis 18d6e3292d Replace Cesium monkey-patches with hooks and keep internals in one module
The arrival ground guard replaced camera.flyTo, flyToBoundingSphere,
setView, lookAt and cancelFlight with wrappers so a direct caller would stop
it. It now remembers the pose it started on and, before each retry, yields
if a flight is under way or the camera has moved across the ground, down or
around. A straight rise is not a move: Cesium's terrain collision lifts a
buried eye that way as tiles load, which is the case the guard exists for.
This also catches owners the wrappers missed (a pose written directly,
lookAtTransform), and no camera method is replaced.

Recent imagery and weather overwrote provider.requestImage (weather also
provider.credit) to ration tiles. They now state that policy as a hook with
withTileRequestHook(provider, { requestImage, credit }) from
src/render/cesium/tileRequests.js, which hands Cesium a provider delegating
to the original and leaves the original untouched.

Every private Cesium field the app reaches goes through a named helper in
src/render/cesium/internals.js: the main and offscreen pick views and their
command extents, a billboard's collection, a cluster's point collection,
the widget's render-loop latch, the WebGL context and the current camera
flight. internals.test.mjs fails when the installed Cesium stops declaring
one of them, and a source scan fails on private access anywhere else. The
cyber sonar's primitives.update wrap stays until the effects work.

Live (Austin, keyless globe): a buried eye is lifted to 253 m over a 133 m
surface; a setView or flyTo by another caller makes the guard yield; radar
loads its tiles through the hook. Documented in docs/APPLICATION.md and
docs/CURRENT-STATE.md.
2026-11-04 11:15:35 -08:00
Sameh Khamis 02d492a079 Take pointer input through one dispatcher per scene
Every layer and tool bound its own ScreenSpaceEventHandler and picked the
same click again: with the usual layers on, one click ran about 26
scene.pick and 2 drillPick passes (120-215 ms in NYC with 18 layers). Pointer
input now comes in through src/input/dispatcher.js, one handler per scene.
A click is picked lazily and at most once per kind of query, and every
subscriber reads the same ClickEvent (pick, hit, id, ownerId, gesture,
drill, ground). The same click now costs 3 picks and 2 drills, 17-70 ms.

- Ambient onClick subscribers run only while no tool holds the pointer,
  checked once per event; tools subscribe with their lease. Moves and
  releases always reach ambient subscribers, so hover and drags end cleanly.
- Camera input and the viewer's stock select/track clicks are ref-counted
  holds (suspendCamera, suppressStockClicks). The dispatcher owns the
  controller's enableInputs, so a Cesium flight that ends no longer turns
  input back on under a drag or the cockpit.
- The draw tool, imagery box, CCTV gizmo, cockpit, directions and every
  selecting layer use it; bindTrackingClickGesture is gone (the gesture is
  on the event). A source scan forbids new handlers, enableInputs writes and
  stock-click removal outside the dispatcher.
- The sensor-style pick correction transit had now applies to every layer.
- Radio's 8-pick near-miss ring is one 17x17 windowed drill.
- A missed pick passed to pickContact is no longer picked again, and a
  touch tap's contact search shares the click's drill.
- A gizmo drag whose release Cesium never reported ends on the next press
  instead of leaving the camera held.

The dispatcher is exported as ./input with the pointer-lease functions, and
documented in docs/APPLICATION.md.
2026-11-04 08:48:51 -08:00
Sameh Khamis 83ec9473b6 Delete the billboard and model mirrors; models become layer-held records
Aircraft draw from GPU icon sets, so the billboard mirror, the billboard
treatment and the aircraft visual-state module had no callers left. 3D models
are now records the layer holds under the contact's id (modelRecord.js):
show and placement are written through showModel/placeModel and read back
from the record; renderer-measured values stay on record.model.

The tracked-model click check only matches when a tracked model exists, so
an id-only pick is never mistaken for a click on the tracked plane.
2026-11-03 22:36:27 -08:00
Sameh Khamis 816002e3b9 Share the aircraft 3D-model regime between flights and military 2026-11-03 20:55:09 -08:00
Sameh Khamis b027bde6ad Draw military flights from the shared GPU icon set
The flights icon planning and presentation move into
`createAircraftIcons` (src/data/aircraftIconLayer.js), and the motion
regime both layers dead-reckon from into src/data/aircraftMotionRegime.js.
Flights keeps only its grounded-floor pass on top.

Military now draws every contact as a row of that icon set, like
flights: the billboards, the cull positions and the rotation-pass
signature go. Tracking hides the row and untracking re-plans it from
the tracked course. Queries read the drawn row position and judge the
horizon as the shader does. Snapshots that arrive before init or after
destroy are ignored, and per-contact lookups find no contact then
instead of throwing.

With about 120 live military contacts, preRender p95 drops from
0.7-0.8 ms to 0.2 ms on the same views. Render time and frame gaps are
unchanged or slightly lower.
2026-11-03 20:30:43 -08:00
Sameh Khamis fa3a3a3bca Draw civil flights from an icon set moved on the GPU
Every flight is now a row in the layer's icon set. Its motion segment
follows the same regime `_deadReckon` picks (interpolate between fixes,
warm up backward from the oldest, coast forward from the newest), and
one shared `_motionRegime` makes that choice for both. The shader moves
every untracked contact between polls, so the 12 Hz fleet tick no
longer touches each billboard. It now only re-plans expired rows,
floors grounded contacts, advances focus while needed, and runs the 3D
model regime.

Grounded contacts the floor lifts are pinned to a hold at the floored
position. Their nose glides on the GPU. Contacts within 50 km re-floor
every tick, and farther ones take turns about once a second. Low
contacts are judged for the horizon at no lower than 12 m above the
ellipsoid, as before. Below hover speed a contact's nose holds. A row
whose fleet model is drawn keeps its focus updated, because the model
reads it. Untracking re-plans and re-floors the icon from the tracked
course.

On the same views with about 6,700 OpenSky flights, frame gaps at p95
drop from 28-40 ms to 17 ms, and the fleet tick from 16-37 ms to about
2 ms at most.
2026-11-03 19:40:39 -08:00
Sameh Khamis 0889cd0cb7 Answer earthquake, CCTV pick and tracked sprite reads from the app
Earthquake analyst records come from the events the layer drew, gated on
its own enabled flag, instead of reading each entity's position and
property bag back; the discs no longer carry the bag. CCTV coverage rays
and projection planes record their camera id in a layer pick store
instead of a cctvCameraId entity property, with the same ownership checks.

The tracked flight, military and local ADS-B billboards record their size
and distance scaling as the entity record's sprite, which the close-range
camera guard and the screen annotations' tracked footprint now read in
place of the billboard's property getters.
2026-11-03 13:32:53 -08:00
Sameh Khamis 05904edfc9 Read aircraft model placement from the app's mirror
Flights, military and local ADS-B now write their models' show and world
matrix through setModel in src/data/modelMirror.js, and read them back
through modelState: the fleet and tracked handoffs, the tracked visual and
trail anchors, detection anchors and modelAnchorWorld. A matrix is copied
into the app's record and into the model's own matrix, so the shared scratch
can be passed directly and models still never share one matrix object.

What Cesium measures (ready, computedScale) is still read from the model,
and colour stays live as on billboards, because cyber sonar writes it too.
Test seams mirror the models they install, as they do billboards.
2026-11-03 12:58:50 -08:00
Sameh Khamis bb91688a62 Read flight and military billboard state from the app's mirror
Flights and military now add their billboards through addBillboard and
write show, position, scale, rotation, size and distance scaling through
setBillboard, which keeps the app's copy in src/data/billboardMirror.js.
Their reads go to billboardState instead of the Cesium billboard, so the
layers no longer read back what they pushed to the renderer.

A mirrored billboard needs an explicit width and height, because unset
Cesium reports the loaded image's size. Colour is not mirrored yet: the
cyber-sonar theme writes it too and tells the writers apart by the live
value, so it moves with the effects port.
2026-11-03 10:56:08 -08:00
Sameh Khamis 04a70d59e9 Keep aircraft, installation and viewshed state off Cesium objects
The aircraft layers' model spec key, IR boost and belly offset and the
billboards' large-icon flag move into aircraftVisuals, one store shared by
flights, military and local ADS-B. Installation markers' last drawn height
and selection move into installationMarkers. The CCTV viewshed QA tag is now
the viewshedCameraId record field, which qa-cctv-v2 reads through
entityRecords. Test fixtures drop a placement flag nothing reads.
2026-11-03 09:54:41 -08:00
Said Turksever 66a5c483c2 fix: resolve review findings and refresh PR #870 against main 2026-11-03 16:17:31 +00:00
Sameh Khamis 65587f6c08 Keep tracked-entity state in app records instead of on Cesium entities
Flights, military, satellites, installations, local ADS-B and ALPR hung
gevTrackedId, gevDisplayPosition, gevVisualPosition, gevSelectionOrigin and
gevLabelModel on the Cesium entities they draw, and the tracked readout,
follow camera, cockpit, share links and awareness read them back. They now
live in src/data/entityRecords.js, an app-owned record per entity: layers
write entityRecord(entity), readers use readEntityRecord(entity). Nothing
changes on screen. This is the first slice of the renderer plan's state
mirror (P1).

The module is exported as ./data/entity-records so callers can read the
same records, and window.__godsEyeView.entityRecords gives the QA scripts
the same access from the page.
2026-11-03 08:09:00 -08:00
Sameh Khamis 32e08f5043 Merge remote-tracking branch 'origin/main' into sameh/world-clock
# Conflicts:
#	index.html
#	src/i18n/locales/ar.json
#	src/i18n/locales/de.json
#	src/i18n/locales/es.json
#	src/i18n/locales/fr.json
#	src/i18n/locales/it.json
#	src/i18n/locales/ja.json
#	src/i18n/locales/pt.json
#	src/i18n/locales/ru.json
#	src/i18n/locales/uk.json
#	src/i18n/locales/zh-CN.json
#	src/i18n/locales/zh-Hant.json
2026-11-02 13:14:32 -08:00
Sameh Khamis 0c4da3cdb2 Keep one world clock that every timed layer reads
Core told time eight ways: Date.now() in most layers, JulianDate.now() for
flights and military, Cesium's clock frozen at page load for the sky, the
weather clock for observed imagery. They now read one clock,
src/time/worldClock.js, exported as ./time.

Live is a mode, not a timestamp: while live the clock is the wall clock,
so every layer draws as before. Away from live only the layers that follow
the clock move with it. The weather products follow it, as they followed
the weather transport; a host opts others in with follow(id).

- The weather clock takes its time from the world clock and drives its
  replay, stepping its frames as before.
- Satellites, launches, flights and military (still 30 s and 15 s behind),
  transit, GNSS, Recent Imagery, street level, the HUD and the celestial
  ring read worldTimeFor(id). Cadences stay on the wall clock.
- Cesium's sky (stars, sun, moon, atmosphere, lighting) draws at the world
  time each frame instead of the moment the page loaded.
- Weather frames and satellites declare coverage() for a host's timeline.
2026-11-01 21:47:32 -08:00
Sameh Khamis 0e90a03de7 Round every heading readout through one shared helper
The transit, ALPR, vessel, CCTV and flight/military context fixes each
wrapped 359.5° to north with an inline Math.round(x) % 360. They now call
roundHeadingDegrees in src/data/headingDegrees.js, which also wraps negative
and multi-turn bearings. normalizeHeading moves there with it, and
cockpitMath re-exports it so existing imports keep working. It now adds a
turn only to a negative remainder, so a bearing just under half a degree
keeps its precision.

The awareness, Local ADS-B, cockpit wind, cockpit heading and Street Level
readouts use the same helper. The Cockpit's TRACK ACQUIRED signal rounded
without wrapping and could read COURSE 360°; it now uses
formatHeadingReadout, which shows --- for a track that is not finite.
2026-11-01 21:41:49 -08:00
Aditya ac0e124a67 fix(flights): read a 359.6° track as 0° in the voice context, not 360°
The voice context records for a selected flight or military contact
rounded the track without wrapping, so a contact on 359.5° or more was
described to the assistant as heading "360°". Both now wrap after
rounding: 359.6° reads "0°", 359.4° still reads "359°".
2026-10-28 18:11:42 +05:30
quanticsoul4772 91144e88ad perf(models): aircraft models skip Cesium's dynamic environment map (#1366)
Skip per-aircraft dynamic environment maps while retaining default model lighting.

Contribution by @quanticsoul4772.
2026-10-25 08:08:43 -07:00
Sameh Khamis 45a093fb42 perf(flights): reuse resolved models in detection queries 2026-10-24 23:36:30 -07:00
Sameh Khamis 7cdaa6044b perf(flights): cache unchanged detection label text 2026-10-24 23:36:30 -07:00
Sameh Khamis 27cfbe5562 Reuse aircraft render times and extrapolation frames 2026-10-24 22:47:20 -07:00
Sameh Khamis 8d454bf7f1 fix: improve mobile contact selection and context drawers (#1338)
Improve coarse-pointer contact selection, reveal tracked aircraft through Contacts, support downward drawer dismissal, and enlarge the mobile logo.
2026-10-23 15:05:23 -07:00
Sameh Khamis 73e789489b chore: drop exports nothing imports
Knip, configured with the application, package exports, scripts, QA
harnesses, workers, tools and tests as entry points, reports exports
that no module imports. Each was checked by hand against string-based
and namespace imports.

- Symbols that are still used inside their own module lose only the
  `export` keyword (176 constants and helpers).
- Unused re-exports are removed from barrel modules (flight, military,
  vessel, CCTV, directions, transit history, local ADS-B and street-level
  policy modules).
- Declarations that nothing uses at all are deleted, among them
  AIS_WATCHDOG_STATUSES, applyFilter, isRadioCountryCode, compactText,
  DENSITY_STOPS, the unused CCTV endpoint constants, and the SDR band
  constants.
- Default exports that nothing imports are removed. The ones in
  src/data/earthquakes.js, src/data/telegeographySubmarineCables.js,
  src/data/wind.js and src/data/bhoteKoshiLocator.js each constructed a
  layer instance at import time that nothing used; those instances are
  no longer created.

Every export of a package.json entry stays, as does TOMTOM_CREDIT,
which the traffic layer reads from the credits namespace it is given.
2026-10-22 19:00:40 -07:00
Sameh Khamis dbb20c72fe chore: drop unused local bindings
Remove locals that are assigned but never read: two unused
JulianDate.now() calls in the flights and military nearby queries, an
unread record lookup in the military snapshot renderer, unused axes from
the CCTV gizmo, an unused vessel state alias, and two unused ALPR
presentation handles. Each removed expression is side-effect free.
2026-10-22 18:09:40 -07:00
Sameh Khamis 761953b0bf Correct the remaining permanent-cache comments
The adsbdb proxy keeps successful and 404 answers for 24 hours; two policy comments and the provider's doc comment still said forever.
2026-10-17 11:30:46 -07:00
Sameh Khamis 84cd4d7f99 Merge branch 'main' into docs/fix-adsbdb-cache-ttl 2026-10-17 11:30:30 -07:00
Said Turksever 694c51d0d1 Merge branch 'main' into fix/tracked-info-vertical-rate 2026-10-17 00:06:57 +01:00
Sameh Khamis c6f0f9db0a Share one antimeridian-safe distance and move the changelog entry
The flights records and the mesh-floor sampler kept identical copies of the equirectangular distance; both now import src/data/approxDistance.js. The changelog entry moves to changelog.d (#787), and CURRENT-STATE notes the antimeridian behaviour.
2026-10-16 15:01:29 -07:00
Sameh Khamis c37e301ab7 Merge branch 'main' into fix/geo-distance-dateline
# Conflicts:
#	CHANGELOG.md
2026-10-16 14:59:29 -07:00
German KhokhlovandClaude Opus 5.5 20f4cf3763 i18n: fix the LGTM review findings and tidy the branch texts
- i18n scanner: lastError sink, no false sinks on defaults and ternaries
- shared src/i18n/marker.js for modules that only mark strings
- wind field messages move to wind/fields.js; CITY_POIS imports from cityPois.js
- drop review IDs, change history and stale references from comments and docs

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-16 21:00:28 +04:00
German KhokhlovandClaude Opus 5.5 3157888780 i18n: fix the repeat-review findings
- Status pieces translate in one place (src/ui/statusText.js): a Local
  ADS-B error with a single piece now translates, and the analyst card
  splits empty-layer notes into pieces (Transit, Local ADS-B).
- Translate the ALPR retry chip text, the ECCC error on the Air quality
  card, "Upstream response too large" and the "entry {n}" feed label.
- The unmarked-text check also sees error/loadingLabel/statusMessage/
  status assignments, `status:` properties and showToast?.( /
  this._showToast( calls; the scene import preview marks its pack
  statuses, data and model-facing text carry i18n-ignore with a reason.
- Tests check the real code: the HUD locality formatter moves to
  src/hudLocalityFormat.js, the unsaved-keys test pins the teardown.
- One copy each: city names come from src/cityPois.js, the GNSS HTTP
  template and wind "field unavailable" texts; dead fallbacks removed.
- Leftovers of the reverted vessel-label change and the reformatting of
  detectionHost.test.mjs / keySetup.test.mjs are back to main.

Catalogs: es/ru 2617 messages each, complete.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-16 19:28:59 +04:00
Aditya 2c61d9e2b7 fix(geo): wrap longitude differences across the antimeridian
The flights ground-floor pipeline subtracted longitudes without wrapping.
approxDistanceKm, and its copy in the mesh-floor sampler, measured two
points 0.2° apart either side of 180° (21 km at Fiji) as about 38,000 km,
so low and grounded aircraft just across the line from the viewer were
never floored or mesh-sampled. corridorFloorCells walked a segment across
180° the long way round, filling its cell budget with ground behind the
contact and never requesting the cells it was about to cross, and
stickyFloorCell dropped its hysteresis for a contact on the seam. Each now
takes the short way round, and corridor points are normalised back into
[-180, 180].

SEARCH NEARBY SITES centred its Google Places search on the mean of west
and east, which for a view across 180° (west > east) is longitude 0, and
sized the radius from the view's height alone. It now measures the view's
width through 180° and searches its real centre.
2026-10-16 16:48:37 +05:30
daikaginza e9fb6c15c6 Merge remote-tracking branch 'upstream/main' into fix/tracked-info-vertical-rate 2026-10-16 08:39:10 +07:00
Meir Michanie e82e7a3dd4 Merge remote-tracking branch 'upstream/main' into i18n-spanish 2026-10-16 02:18:19 +02:00
Mazeyar Moeini FeizabadiandClaude Opus 5.5 2e4beb9418 Merge main (82022306) into fix/flights-unpositioned-rows-complete
Resolve conflicts with main by keeping both sides:
- CHANGELOG.md: keep this PR's flights entry above main's newer entries.
- src/layers/flights/records.test.mjs: keep this PR's position-less
  retention test alongside main's civil emergency-status test.

src/sources/live/aircraft.js merged cleanly: openSkySnapshot keeps main's
emergencyByIcao normalizer and passes openSkyUnpositionedId to admitRecords.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-10-16 01:30:21 +02:00