Google's Maps Platform terms forbid Street View imagery beside non-Google
maps, so the provider declares requiresMapStack: 'photoreal': off Google
3D its chip is dashed with the reason, lookups and opens skip it, and
leaving Google 3D closes its panorama.
- Ground clicks: only a click on the map itself (scenePick.isSurfacePick:
nothing picked or Google 3D tile content) at street zoom opens Street
View, and the camera stays put; higher up the hint says to zoom in.
scenePick.pickGroundPosition replaces the copy in Directions.
- Viewer: poses go out at once and again when the date and address
arrive, so an open never hangs on that lookup; one lookup per panorama,
seeded by the nearest lookup; a close settles a pending open; failed
lookups are asked again; poses follow position changes, not pano_changed.
- Loader: the gm_authFailure handler is installed once, so a retried load
reports a refusal once.
- Viewer host: a prewarm that lands after another provider took the host
is released; FIT/FILL availability is set on every open.
- Provider: a refusal while switched off reports no error over another
photo; SINCE compares against the end of Google's month; messages name
the referrer and network causes; FLAT says Street View is 360° only.
- The layer row names the key of the providers that are on; the MCP panel
CSP admits Street View's tiles, control images and photos.
- Tests for each, against fakes that now follow Google's event order; the
browser gate restores its state, waits instead of sleeping, aims its
panel clicks and corner drags, and asserts the camera stays put.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Google Street View registers beside Mapillary as provider `google`. It runs
on the Maps JavaScript API with the browser GOOGLE_MAPS_API_KEY, loaded on
first use (mapsLoader.js), and uses Google's own StreetViewPanorama as its
viewer adapter, emitting provider-neutral poses (address and month in the
caption, a link to Google Maps, steps along Google's arrows, FOLLOW on
Google 3D). Its chip starts off because every panorama is billed to the
key; the share option is `g`.
Google offers no coverage layer for other maps, so the provider draws
none: with it on, a click on bare ground at street zoom opens its nearest
Google-collected outdoor panorama (groundClick.js). A key Google refuses
reads KEY REJECTED and fails a pending open at once; a lookup Google never
answers fails after 10 s.
Core: providers may declare `groundClick` and `defaultOn`; poses may carry
`capturedAtPrecision` and `title`; the coverage line keeps every
provider's hint; opening one provider's image releases another's
prewarmed viewer; FIT/FILL hides for viewers without render modes. CSP
script-src admits https://maps.googleapis.com. The browser gate gains two
Street View steps (the keyed one skips as 'no Google key' in CI).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Credit the equivalent contribution in PR #959 alongside PR #934, while preserving the original PR author's commits.
Co-authored-by: shirunjies8-png <[email protected]>
- Imported metadata stays inert: descriptions, native labels, properties and
KML extended data are dropped from every entity; names are kept as short
plain text. GeoJSON loads with a describe that builds no HTML, and
simplestyle (including marker-symbol) is dropped, so no icon asset is
fetched for a file and GeoJSON draws in its row's color.
- Bound geometry before loading: features and vertices are counted in the
parsed GeoJSON, the KML document and while reading GPX, and a file over
20,000 features or 250,000 vertices is refused before Cesium builds it.
- Imports run one batch at a time, so concurrent picks or drops cannot pass
the 12-file cap.
- Fly-to framing walks long tracks by index instead of spreading them into a
call.
- Fly-to is an immediate navigation through the application shell; the fly
after an import is a deferred navigation stamped when the batch starts and
re-asserted just before flying.
- Dated imports never change the shared clock: imported sources expose no
clock, entities are available for all time, and a KML gx:Track is drawn as
its line.
- GPX is read into GeoJSON with one line per track segment, without times.
- KML/KMZ rows show a hatched swatch (they keep their own styles); keyboard
focus is kept on the same control after hide/show and moves to the next
row after remove.
- Unit regressions for each, and the rendered QA now imports hostile
metadata, dated KML/GPX and a two-segment track, and fails on any request
for a file's contents or icon assets, a clock change, or surviving
metadata.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
DISPLAY ▸ Import (and drop onto the globe) puts the person's own files on
the map as Cesium data sources, clamped to the ground, one color per file,
with a row to show/hide, fly to or remove each. Files stay in the browser
for the session.
KML/KMZ are sanitized before Cesium reads them (network links, remote
icons/styles, models, photo/screen overlays and balloon HTML removed; KMZ
images served from blob URLs), so an imported file cannot make the page
fetch anything. KMZ is read with a small dependency-free zip reader on the
platform DecompressionStream, with a zip-bomb limit. Bounded file size,
entity count and number of files.
Tests: src/data/geoFileImport.test.mjs, src/ui/geoFileImport.test.mjs.
Gate: scripts/qa-geo-import.mjs. The import half of #890.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Fixesbilawalsidhu/gods-eye-view#927. Each stdio MCP server made its own
random panel key, and panel_request accepts only the key in the panel
page. A client that starts two server processes for one connection and
reads the page from one while sending the page's requests to the other
(seen in Claude Desktop on Windows) therefore always got "Only the God's
Eye View panel may make this request".
The stdio entry now passes a key shared by the install, created once in
.gev-cache/mcp-panel-key. The file is staged 0600 and published with
link(), so processes starting together agree on one key and never read a
half-written one. If it cannot be stored, the process keeps a key of its
own, as before. createLocalMcpServer still makes a fresh key unless given
one, so in-process servers (the /mcp HTTP plugin, tests) are unchanged.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Trim the doc text this PR adds (README, CHANGELOG, CURRENT-STATE,
KNOWN-ISSUES, SECURITY, DATA_SOURCES, .env.example, the CI job comment),
drop code comments that restate the code, cut design-note JSDoc to a line
or two, and drop review tags from test names. Comments only; no code
changes.
Also: README key count (seven keys, two metered), CURRENT-STATE's gate
paragraph (CI runs a production build with a dummy token), the stacked
doc above meshBoxInRange and the orphaned inMeshRange line in
coverage.js, and a duplicate ALPR row in DATA_SOURCES that a merge had
brought back.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The client lease id came from crypto.randomUUID, which browsers only
expose in secure contexts. Opened over http://<lan-ip>:4173 (the
HOST=0.0.0.0 opt-in), starting a live camera feed threw before playback.
Fall back to a v4 UUID from crypto.getRandomValues, which the server's
lease check accepts.
From the IC8 review of #768, each with tests that fail before:
- P2: the expanded viewer is a real modal: while it is on screen every
other <body> child is inert (only the ones it set are restored, on
shrink, close and destroy, and when Clean View/recording/cockpit hide
it). The voice pill and toasts are not clickable while it is expanded.
- P2: the tile proxy follows redirects by hand, at most 3 hops, each one
HTTPS on exactly https://tiles.mapillary.com without credentials;
anything else is a 502 and the token never leaves that origin.
- P2: the real dev and preview server smoke tests request
/api/mapillary/status and a tile, and the browser gate first checks the
server's real status route before any interception, so CI fails if the
Mapillary plugin is not registered.
- P2: both gates press panel headers through one shared helper
(scripts/qa-panelDrag.mjs): re-resolve the header until it is under the
pointer, record what the press hit, wait on the real floating/docked
state, and retry only a press that provably missed the header.
Verified: unit 5910 pass; fixture gate 17/17; panel gate 5/5; live gate
with a real Mapillary token 22/22.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Cover every Norwegian station-based city-bike system with an open GBFS
feed: Kolumbus Bysykkel (Stavanger) and Farte Bysykkel (Skien/Porsgrunn)
through Entur Mobility, and Bysykkel Lillestrøm through JCDecaux
Cyclocity.
api.entur.io and api.cyclocity.fr join the GBFS allowlist, each kept to
its GBFS path prefix since both hosts front other APIs. Entur serves its
feeds without a .json suffix, so the endpoint checks accept either form,
and requests to Entur carry the ET-Client-Name header it requires.
Attributed under NLOD (Entur) and Licence Ouverte (JCDecaux).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Add Norway's three Urban Sharing city-bike systems to the Bike Share
layer and get_bike_share. The feeds are keyless GBFS on
gbfs.urbansharing.com, which joins the proxy allowlist. The proxy now
sends the Client-Identifier header the operators ask clients to send.
Attributed under NLOD 2.0 in DATA_SOURCES.md and the data credits.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
From gekh's review of #768, each with a test that fails before:
- The routes refuse cross-site requests (sameSiteGated, as the paid
proxies do) and the tile route has a generous per-IP limit (600/min), so
another page cannot burn the token's quota or trip the shared 429 hold.
- At most six upstream fetches run at once; a queued request that is
abandoned never fetches, nor does one abandoned during the disk read.
- A body past the 48 MB cap aborts the upstream request as it streams.
- Empty tiles are charged against the memory and disk budgets.
- Each disk write uses its own temp file and a retrim is skipped while a
write of that tile is pending, so concurrent hits cannot extend a tile's
life or fail a rename.
- Upstream refusals other than 401/403/429 answer 502.
- The tile route's success path is tested end to end (200 with the image
layer stripped and the right headers, 204 when empty, an abandoned
response aborts upstream); the teardown race that made this file flaky
is gone (240 parallel runs, no failure); the QA-constant tautologies are
replaced by a check against the real provider registry; the boundary
group lists the modules the provider actually imports.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
From the IC8 review of #768 (P2s), each with a test that fails before:
- A tile read from disk keeps its real age in memory, and the trim rewrite
keeps the file's mtime, so nothing is served past the 24 h TTL.
- The disk cache is swept in the background at most every 15 min: expired
tiles go, then the oldest past 1 GiB. Coverage zooms the app never
requests (z6-10) are refused with a 400, and layer names are matched as
own keys only.
- The tests run against a temporary cache directory (a test seam) instead
of writing into and deleting from the developer's real .gev-cache.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The fixture gate always reported a configured key, so the KEY REQUIRED path
most installs see never ran in CI, nothing checked that the lazily imported
MapillaryJS viewer loads, and the FOLLOW step (which needs an open photo)
failed for anyone with a Google key. Fixture runs now:
- check the viewer is stood up in the panel ahead of the first photo;
- serve a rejected key and assert KEY REJECTED, no further tile requests on
a pan, and no stale message once the layer is off;
- open a second page whose server has no key and assert KEY REQUIRED;
- treat FOLLOW as a photo step.
Passes 16/16 locally against a dev server with Google 3D available.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Lower the Vegvesen default cap to 900, still above the ~850 working
cameras, so the per-pack defaults stay closer to the catalog default.
- Name the flat ground-elevation prior as a known limitation: the feed
is 2D, and mountain-pass cameras can sit below terrain where neither
the point-height prior nor the ground snap resolves.
- README: ~3,900 public cameras.
- Use one HLS figure (~135 working) in CHANGELOG and DATA_SOURCES.
- DATA_SOURCES: list the frame and HLS hosts alongside the catalog host.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Norway's ~850 working road cameras load from one keyless GeoJSON request
to the agency's OGC API view of its DATEX 3.1 CCTV table, so no DATEX
account is needed. Faulty cameras are dropped, every camera sits under a
"Norway" category, and the ~135 that publish HLS play as live video
through the existing in-memory relay with the still as fallback. Frames
and manifests are pinned to each camera's own path on the agency hosts.
CCTV_VEGVESEN_ENABLED=0 disables the pack, CCTV_VEGVESEN_MAX_SOURCES
caps it (nearest the largest cities first) and CCTV_VEGVESEN_VIDEO=0
keeps stills only. Attributed under NLOD 2.0.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Keeps the voice-core prompt rules and adds main's world-query and
vessels-vs-visuals rules; the tool catalog wraps the deixis-aware runner.
Also fixes two things the branch had before the merge:
- Live voice could not start: OpenAI rejects track_entity's top-level
anyOf. Model-facing tools now omit top-level combinators; the runner
and benchmark still require a query or a referent.
- The Contacts-centred analyst answer dropped the viewport coverage note.
b4067f9 moved the OpenSky states/all fetch into fetchOpenSkyStates, with a
10-second limit per attempt and one retry. Keep that and drop this branch's
20-second exchange deadline; the 8 MiB body cap now reads inside the helper
under each attempt's signal. The CHANGELOG bullet moves under [Unreleased],
and CURRENT-STATE describes the per-attempt OpenSky deadline.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Brings in 123 commits from main, including the v0.2.0 and v0.2.1 releases
(MCP server and tool catalog, server security hardening, build hygiene).
Conflicts:
- package.json: kept main's script order and added this PR's
qa:panel-resize and qa:street-level; exports keep both sides (main's
tools/view entries and this PR's street-level and Mapillary entries).
- src/tooling/viteBuild.test.mjs: kept this PR's Mapillary-token define
assertion and main's new wildcard-host allowedHosts assertions.
- CHANGELOG.md: main now has release sections; this PR's entries go under
[Unreleased].
Checks after the merge: doctor, format:check, check:boundaries,
layer-token:check (28 published, 1 new: street-level 0), npm test (5726
pass), build, the Windows job's focused tests (70 pass), qa:panel-resize,
and the keyless street-level gate. The new CSP allows Mapillary (https:
connect/img, blob workers). The keyed gate stops at coverage locally
because the dev .env Mapillary token is invalid (upstream 403), not because
of the merge.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Resolve the CHANGELOG and CURRENT-STATE conflicts: the PR's entries go under
Unreleased, after the 0.2.0 release.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
loadBundledJson's callers passed a literal JSON import as a Node fallback,
which made the production build emit a JavaScript copy of every pack beside
the JSON the browser fetches. The loader now reads file: URLs itself under
Node (through process.getBuiltinModule, synchronously, as promptly as the
cached import it replaces), and the callers pass only the URL. On a Node too
old to provide getBuiltinModule it says that Node 24.14 or newer is needed.
dist/ drops from 54 MB to 42 MB. A test keeps app code from importing a pack
as a module.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
/api/google/text-search spends the same Google quota as nearby-places but
was not behind the cross-site gate. It now refuses cross-site requests
before calling Google, and a test covers both paid Google routes.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Vite installs its Host check after the middleware plugins add in
configureServer, so the provider and /api routes answered any Host,
including a DNS-rebinding name. hostCheckPlugin runs first on the dev and
preview servers and applies Vite's rule with the same allowed hosts: IP
addresses, localhost and *.localhost, the configured server host, and the
listed names. A test drives a real Vite server with an unlisted Host.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The server routes a mounted path when a dot follows it, so /mcp.json reached
the MCP endpoint while panel_request refused only /mcp and /mcp/...; the same
held for the provider-settings, credential and model routes. The refusals now
match a dot after the route as well. A regression test drives panel_request
against a real Vite server.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
localRequestGate.mjs owns the reverse-proxy header list and hasProxySignals;
Provider Settings, the cross-site gate and /mcp all use it instead of two
copies of the same nine names. The changelog credits the cross-site gate.
Co-Authored-By: Claude Opus 5.5 (1M context) <[email protected]>
The voice debug log writes the server's timestamp after the client's record,
so a record can no longer replace loggedAt. The dev and preview servers also
send X-Content-Type-Options: nosniff with their shared browser headers.
From the findings in #710.
Co-authored-by: Sunil <[email protected]>
Co-Authored-By: Claude Opus 5.5 (1M context) <[email protected]>
Binding HOST=0.0.0.0 no longer sets Vite's allowedHosts to true. The dev and
preview servers accept IP addresses, localhost and the LAN hostnames listed
in GEV_ALLOWED_HOSTS; suffix and wildcard entries are ignored. The
configuration factory takes the resolved list as an input, so build/vite.js
still reads no environment.
Ported from #97 to the current build/vite.js layout. Fixes#21.
Co-authored-by: Sameh Khamis <[email protected]>
Co-Authored-By: Claude Opus 5.5 (1M context) <[email protected]>
The OpenAI endpoints (/api/realtime/token, /api/openai/hud-summary) now
allow 30 requests per minute per client IP and the Google Places endpoints
120, the caps the Pinokio build already ships. GEV_RATELIMIT_OPENAI_PER_MIN
and GEV_RATELIMIT_GOOGLE_PER_MIN still override them and exactly 0 disables
them; an unreadable value falls back to the default rather than to
unlimited.
Salvaged from #683 onto current main.
Co-authored-by: Sameh Khamis <[email protected]>
Co-Authored-By: Claude Opus 5.5 (1M context) <[email protected]>
SECURITY.md gains a section on what /mcp accepts, the panel's request key,
the browser keys the panel build carries and embed-mode framing. TOOLS.md
now describes what panel_request may request, and the changelog records
the recent MCP and embed changes.
Co-Authored-By: Claude Opus 5.5 (1M context) <[email protected]>
Reworks #568 to the shape asked for in review.
Generalized from "AQHI" to a provider-backed Air quality layer, with ECCC's
AQHI as the first registered provider. Readings are carried as
{ provider, scale, value, band } rather than a bare number, because
air-quality indices are not interchangeable: AQHI runs 1-10+ on health risk,
the US AQI runs 0-500 on concentration breakpoints, and Europe's EAQI is a
five-step category. Naming the index a value belongs to is what lets another
network be added without inventing a shared numeric meaning. Coverage is
stated as "Canada only" on the provider, the layer row and the card.
Adds the WEATHER panel readout (readout: true) carrying the band legend and
the worst readings currently in view, with getRowControls/setRowControlsListener
following the wind and cyclone cards. An unresolvable view rectangle degrades
to the worst readings overall rather than to a blank card, and a rectangle
crossing the antimeridian is handled.
update() now takes the earthquakes layer's abort-and-guard shape: it aborts any
in-flight request, passes the signal through to the source, and refuses to
touch the scene when the request was superseded, aborted, or the layer was
disabled while it was outstanding. disable() and destroy() abort too. Tests
cover the late-response, superseded-refresh and disabled-update paths.
Rebased on main: the source is registered in src/sources/reference.js, and the
allocation profile was re-measured against the current worker — median 3,900
B/frame, max 4,114, 85.7 B/candidate, inside the shared 154 ceiling, budgeted
at 5,200 for 26% headroom. The earlier figures no longer held.
Freshness is now judged on the observation time rather than on when the last
response arrived. lastUpdate only says the feed answered; a station that keeps
returning a reading from four hours ago would otherwise be narrated as live by
the HUD and the voice provenance envelope. getStats() reports observedAt and
stale, so layerFeedState() calls the layer stale past two missed hourly
publications, and degraded when a refresh fails over readings that are still
good.
The share-link token is 0, which is what layer-token:next allocates. Taking it
moves the ledger fixtures that had hard-coded 0 as the free digit and 3 as the
one after; those shift to 3 and 4. The pinned equality between the reservation
ledger and LEGACY_LAYER_STATE_TOKENS also had to become "the closed legacy set
plus air-quality", since that set is documented as never growing. Happy to
re-pin this differently if you would rather the fixtures derive the provisional
digits from nextLayerStateToken() so the next layer does not move them again.
The layer and its source are registered as ./layers/air-quality and
./layers/air-quality/source, each with its own boundary group, following the
perimeters pair. check:boundaries requires the package exports and the group
exports to be the same set, so a layer that ships a source needs both.
keep contacts counts, rows, scope and provenance on one retained snapshot
report capped cohorts as lower bounds
separate sibling tool cancellation from newer user turns
align track_entity validation across runtime and benchmark paths
