setMarkerStandIn takes an optional focusRangeM(record): when a click on a fire the stand-in draws moves the camera there, it stands off that many metres instead of the usual fire framing. A world focus request may carry its own rangeM; past the framed radius it replaces the kind's range.
The fire layer takes a stand-in for its markers (setMarkerStandIn({ hitTest })): its glows, heatmap and ambient cards are hidden, and a click the stand-in answers selects and focuses the fire exactly as a marker click does.
Space Missions no longer runs as a Context mode. The launches layer owns
its Satellites dependency, including the rule that a Satellites off
asked for after Space Missions was switched on ends it (request order
decides), and a small controller connects the layer to its own panel and
store. Context no longer isolates, snapshots or restores Space Missions
or Satellites, so Contacts and Space Missions run together in either
order, and scene playback no longer exits an isolating mode. Settled by
the owner: Contacts leaves Satellites as it is, and only a person's or
voice Satellites off ends Space Missions; a scene, story, preset or
other programmatic off does not.
Turning the layer on by hand or by voice, choosing it at first run, or
picking a mission on the globe opens the Space Missions panel, and on a
phone its Missions sheet. Asking voice to open the panel while the layer
is off is refused with a reason, and voice never opens it while the
Cockpit owns the screen. With no Context mode on, a voice Context off
switches Space Missions off. A failed Satellites restore no longer cuts
the layer's teardown short. Mission labels on the globe select their
mission. The layer names a failed first index load itself, so the
Context toast no longer imports Space Missions code.
Also carries the satellites request ordering and
DataLayerManager.waitForLayerIdle, the share token for the panel, voice
panel ids, Cockpit folding the panel away and the phone tab ellipsis.
The panel shares the rail gutters and hover border of the other side
panels.
On top of the Omnibar: "open space missions panel" reaches the new
panel, and Open Context no longer answers to "missions".
Co-authored-by: Sameh Khamis <[email protected]>
Display > HUD > Sonar now turns the sonar sweep on over Tactical or
Minimal. It is off by default, ON reveals its five sliders, and it keeps
its guards: an OFF control, the sweep only while the HUD is visible and
outside Cockpit, no animation under reduced motion, and repaint timers
re-armed only after a drawn frame that still shows contacts.
The Cyber layout, its shell skin and its Cockpit lanes are removed. Share
links, scenes, saved views and set_hud that name Cyber open Tactical with
Sonar on; links and scene shots record Tactical with Sonar under the same
code, and a restored state that names another layout turns Sonar off.
set_cyber_sonar keeps its name and works under any layout. A newer Sonar
toggle or voice setting wins over a share-link restore that lands later.
From 1200px wide the command dock and World Timeline sit 74px above the
bottom edge, as in the Omnibar layout, leaving the bottom row to the map
attribution (left) and the Power Up corner row (right). The attribution
moves to the bottom right when the page runs right to left, where the
corner row sits at the bottom left, and a long credit line wraps upward
before reaching the corner row. The Tactical bottom-right readout sits
8px above Power Up and the coordinates start level with it. The World
Timeline is narrowed to sit between the corners. Toasts keep clear of
the raised dock and the chat and voice panel height budgets subtract its
rise. Below 1200px the layout is unchanged. The left rail treats the
centered World Timeline and voice control as obstacles only where they
reach a laid-out panel.
On top of the Omnibar: sonar.css replaces cyber.css after the Omnibar
imports, the Omnibar's HUD guide step now says Layout picks Tactical or
Minimal, and the Omnibar's Tactical bottom-right readout keeps the same
8px above Power Up.
Co-authored-by: Sameh Khamis <[email protected]>
- A tile that cannot be read is left out of placesNear's answer instead of
failing it; without the pack's index the cities are still the answer.
- The build no longer inlines the small tiles into one chunk that loaded
with the first lookup: all 732 are their own files.
- A row at latitude 90 or longitude 180 is tiled where the lookups read it.
- --min-population 0 is taken as 0, not as the default.
Co-authored-by: Manjunath Paparaju <[email protected]>
137,662 places of 1,000 to 14,999 people that Wikidata gives a population
and coordinates for, none already in the cities pack, in 732 tiles of
5 x 5 degrees with an index of row counts (CC0). Nothing loads with the
app: a lookup reads the index once and then only the tiles it touches.
placesNear lists the places around a point, and findPlace finds a small
place by name near the view when no city of that name is near. The cities
build script writes the tiles with --tiles; the step from rows to files is
checked offline.
Co-authored-by: Sameh Khamis <[email protected]>
A tracked aircraft's icon and 3D model keep the colours they have
untracked in Flights and Military Flights (no cyan, no lighter amber);
only the icon's alpha changes (stale fade, clear while its model draws).
A selected vessel or aid keeps its type colour instead of white, and a
tracked satellite's dot keeps its class colour instead of yellow. An
emergency stays red while tracked.
A civil aircraft was drawn as an airliner until its type lookup answered,
even when its feed already named the type: a helicopter showed the
airliner icon and model for as long as the lookup took.
- Flights classes every contact, and picks its model, by the feed's own
ICAO type designator from the first fix. A looked-up type replaces it
once the lookup answers and outranks the feed's on every later poll;
the lookup still runs and fills the type name and registration.
- A surface emitter category still keeps only a ground type (ZVEH, GRND)
from the feed.
- State vectors have no type field, so an /api/flights answer may send
`typeByIcao` beside them, by ICAO address, as `emergencyByIcao` is sent.
The regional adsb.lol fallback now sends it from each row's `t`.
When an application places live contacts itself, the tracked trail was cut at the layer's own delayed clock, which can run minutes behind the placed aircraft: the trail ended far behind the aircraft, and its head was dropped while that clock warmed up. The trail now reads the aircraft's time off its own reports at the point where it is drawn, for Flights and Military Flights.
Aircraft models multiplied their tint into the shaded paint (HIGHLIGHT).
A saturated tint zeroes every channel it lacks: the tracked cyan (no red)
drew a red helicopter solid black, day or night, and a white Cessna one
flat cyan. Tinted models now mix the colour in at 30%
(AIRCRAFT_MODEL_TINT_MIX), so the paint stays readable and the colour
still marks them; untinted models still draw their own colours, and the
IR boost stays flat white.
Neither the multi-part models nor the part shader were involved: old and
new GLBs, with and without the shader, render the same pixels, and an
untinted model at night is lit by the default ambient term.
The new conformance check draw.models.paint draws a model painted with
COLOR_0 under a fixed sun and reads its colour by day, at night, and
under a tint mixed in. The parts test model can now carry vertex paint.
A host-supplied placement's speed is how fast the marker is drawn. While it
waits for its fixes to catch up it stands still at 0, so tracked-aircraft
panels and the cockpit readout showed 0 m/s for an aircraft in flight.
displayedKinematics now takes derivedFromPlacement: when the drawn speed is a
placement's, the reported ground speed is shown, and the placement's only when
nothing is reported. The placement speed still drives motion and dead
reckoning. Civil and military tracked descriptors pass it from the new
_drSpeedPlaced scratch, which placeLiveAircraft sets.
Turning vessels on returned what the first live poll answered, so a
failing feed (such as a missing AIS key) made enable() resolve false and
the layer reported it could not be turned on. loadLivePositions again
resolves with nothing once the poll is done; going back to live reads the
poll's answer through its own path.
Aircraft icons are one size; helicopters turn a three-frame rotor while
airborne or moving; ADS-B ground vehicles share one amber sprite and
stations/obstacles one mast; vessels get hull sprites by type and one buoy.
Going live keeps contacts until the first live answer and replaces them by
id; fast playback holds before the loaded positions end and prefetches
ahead. Cesium models move their parts from the optional model part state.
A selected plane is drawn by its own model, and its fleet model was let go once
that model drew. Deselecting showed the icon at once, and the icon stayed for
about a second while a new fleet model loaded.
The fleet model now stays loaded but hidden while the plane is selected, kept
where the plane is. Deselecting hands the plane back to it in the same frame,
and the icon shows only when there is no loaded fleet model. Military aircraft
share this code. Vessels never swap models on selection, so they had no flash.
An aircraft, vessel, transit or rail vehicle now draws as its 3D model only
when it is within 3 km of the camera, and as its icon farther away. A model
already drawn is kept out to 3.6 km, so a vehicle on the edge does not flicker.
Proximity and All use the same distance and still differ by how many models
they allow (150 and 350). Models are drawn at their true size: the minimum
pixel size that inflated distant models is gone.
The camera altitude above which no model is considered is now the highest
aircraft the layers draw (30 km) plus the 3.6 km, so a camera high above the
ground still models an aircraft close to it. Cockpit's aircraft silhouettes
keep their own 150/185 km and 400/450 km bands, since they are icons.
- A route globe that cannot draw tells the card, which shows another view.
- A card opened before the model set has loaded waits for that load.
- The model turns at the same rate on any display, and holds still under
reduced motion.
- A hidden cockpit view stops drawing.
- The route plane keeps the craft's latest position through the fly-in.
- Metric altitude graphs keep main's 0.5% change threshold.
Co-authored-by: Manjunath Paparaju <[email protected]>
- The route globe, turning model and cockpit view are the renderer's: the
Cesium plugin hands them over as its `cardPreviews` application hook
(src/render/cesium/cardPreviews.js), and the card's tiles keep only the
words, figures and HUD laid over them. Nothing in the UI reaches Cesium,
and a renderer without the hook leaves the card its photo and figures.
- The turning model is the fleet model the globe draws for the aircraft's
type, from the set loaded at startup, so opening a card fetches nothing.
The flights layer's record now carries the type code and emitter category
that pick it.
- The photo comes from the item's own layer: the flights layer's
Planespotters photo for the plane it tracks, and the vessels layer's Open
Vessel Photos photo for the vessel selected, with its credit. It no longer
waits for Contacts to follow the same aircraft.
- The satellite models are left out: the card shows a satellite's ground
view and graphs its altitude and speed.
- The route globe's airport codes are drawn into its own small scene, the
compass reads its course in the active language, the callouts no longer
speak to screen readers every six seconds, and figures use the app's
number format. Esri's tile address and credit live in one place.
Co-authored-by: Manjunath Paparaju <[email protected]>
The Context panel's main tab shows the mode row again, with Contacts
(nearby sites search, the TR-3B toggle and the Awareness list) and Space
Missions (the roster and launch replay); only the Properties tab hides
them. Radio shows while its layer is on, and turning Radio or Launches on
opens Context. When Contacts follows the aircraft the card shows, its list
sits inside the card in a compact form and the card leaves out the flights
and vessels Contacts already lists. The card's Enter Cockpit replaces the
Contacts button, and leaving the cockpit returns focus to it.
Co-authored-by: Sameh Khamis <[email protected]>
The shell passes the ground picker to the click bridge, so the UI shell no
longer pulls in the annotation and search stack. Context's new modules are
owned by the packages that import them and formatted with the rest.
Co-authored-by: Manjunath Paparaju <[email protected]>
A transit vehicle picked on the map now finds its record in Context (the
click carries the feed and vehicle key), so the card shows its operator,
place, route, report age and the operator's last reported state in plain
words. The layer card breaks transit in view down by motion (moving,
stopped, waiting for an update, no recent fix), mode, operator, last
reported state and crowding where the feed has it; vehicle-position feeds
carry no timetable, so early or late is not shown. Rows in the in-view
list carry a motion icon.
Clicking anything a layer can identify opens one card in Context: a hero
tile (route globe and 3D model for a flight, the camera for CCTV, headline
figures otherwise), its facts, actions with Cockpit or the orbital view as
the primary one, and a standard set of nearby blocks (weather and local
time, flights, vessels, hazards, alerts) within one radius the user sets.
Aircraft show altitude as a graph. Things that move are followed when
picked, and a card closes when its layer is turned off.
With nothing selected the panel describes the view: the layers that are on
with a breakdown of what each holds, the camera's height, what is in view,
then time, weather and local news. From far out it shows worldwide counts
per layer. A search field in the header narrows whatever the panel shows.
Prototype. Context reads weather and hazard feeds while its panel is closed,
the two 3D previews on a flight card repaint continuously, Follow can show
pressed after tracking has ended elsewhere, and most new strings are fixed
English. Same-named sites are told apart by position, not by a stable id.
A resumed hold waited only its rest unless the layer gave a media gate,
and only trimmed clips have one, so an untrimmed clip started again (as
on Gyirong) was cut short. The layer now says when a run going on from a
seek started its clip again, and the hold then plays out as from its
start: through the media gate when there is one, else for the whole hold.
For a shot whose path runs during the camera move, a seek in the hold
showed its evidence sequence at the start and a resumed run jumped to
its end. The sequence now stands where its own clock has it (after the
clip and its exit), and a resumed run carries on from there.
After placing the layers at the seek's moment, the hold settles them
without the seek, so the reveal continues from where the seek put it and
a clip the moment falls in starts again from its beginning (a clip
cannot be joined partway); one the moment is past stays finished.
A Stories button (top right) opens Explore: a feed of GEV scenes over
GEV's own Cesium globe, with a pin per story. Explore opens at country
level over the first story and, while idle, flies on from story to story
for a minute. A picked story is framed in the middle of the view; a pin
plays its story on a second click. The Story page plays the scene through
SceneDirector with a timeline, chapters, key moments, sources and
background, then Close (or Back) puts the person's camera, clock, layers,
style and AUTHORING selection back. Open in GEV hands the scene to the
Scenes panel at its current shot.
Stories lists the scenes GEV ships with a camera path (while they are in
the project), the scenes saved with SAVE TO STORIES in AUTHORING, and the
person's other scenes as drafts. The person's own stories live in the
project on this device, so they have no Share; a link to a story that is
not here opens Explore and says so. Each shipped story's
context comes from what GEV knows: what it shows, the place each shot goes,
and each layer's data sources as DATA_SOURCES.md lists them; the Nepal
story carries the event pack's facts and CC BY-NC sources. Card images are
a captured THUMBNAIL or drawn from the keyless Esri World Imagery.
AUTHORING has no scene picker: it starts with no scene, NEW SCENE (or
CAPTURE SHOT) makes one, and Stories' Open in GEV selects one. Before SAVE
TO STORIES it offers topic tags and THUMBNAIL. A scene's stories flag,
storyThumb and storyTags are saved with the project and kept through
export and import.
Only the closed state loads with the page; the screens, styles, story data
and controller load on first open. Stories keeps its place in the query
(one history entry per screen) and holds the share link's hash writes
while open. Keyboard input and voice tools stay with Stories while it is
open. Explore's pins move on every drawn frame without asking for frames;
the idle tour and tile settling are bounded.
All strings are translated in the 13 locales.
Grounded aircraft turn 3D on the first settled frame: streaming tiles are not a miss. groundSnap's tests keep main's cases against the branch's query port; trackedModelForm.test.mjs (the branch's form of trackedModelRegime.test.mjs) takes main's edits.