Commit Graph
272 Commits
Author SHA1 Message Date
Sameh Khamis c57e535275 Merge origin/main: street-level links, embed terrain waits, Swedish, and host-supplied weather frames on the renderer's ports
A weather frame source's regional tiles reach the renderer through the
imagery layer's fetchTile, drawn and handed over as PNG bytes, a null tile
one shared transparent tile; the camera-owner watch listens on the
renderer's canvas.
2026-11-11 09:02:11 -08:00
German Khokhlov 71797427d6 Street Level: a posted view whose camera was taken stands down whole again
Applying the rest of a posted view after the camera was taken during its
terrain wait still let it change the camera: stop_tracking dropped a follow
the user had just started, and annotate_map framed the view's marks. A
camera taken during the wait now ends the view again, as before. The 2 s
terrain timeout and the per-view catch on the queue stay.
2026-11-11 19:01:58 +04:00
German Khokhlov 0ebc09079d Street Level: polar look-at, a bounded terrain wait, takeovers during the flight
- The look-at longitude wraps fully, so a tilted camera at a pole gives a
  point on the globe. The strict off-globe check on street_level is undone:
  points are clamped again, as before.
- A posted view that fails is answered, and the views behind it still apply.
- A posted view waits at most 2 s for the terrain under its camera, then
  keeps its own estimate.
- A camera taken during that wait stays where it is: the rest of the view
  applies, and only its photos stand down.
- show_street_level keeps a search or a press on the globe made during its
  own flight: it adopts only its own navigation stamps on landing, and a
  gesture is never forgiven.
2026-11-11 18:02:15 +04:00
German Khokhlov 4fd36c44e0 Street Level: a replacement keeps its own state, and a posted view stands down
- Releasing a held viewer frees the old source's adapter without resetting
  the panel, so a replacement's error, outcome and armed OPEN survive; a
  cross-source replacement drops the old photo's details and marker.
- The action holds the open photo only for its own switch-off: a source
  switched by hand during the load stops it and reports cancelled.
- A posted view waiting on terrain watches the camera and stands down after a
  navigation or a globe press; a flat or straight-down camera asks no terrain.
- An arming link opens the panel without persisting the layout, and a posted
  view's street-level step runs as programmatic.
- An off-globe street_level point throws TypeError.
- zh-Hant uses the file's wording for the new strings; README and
  CURRENT-STATE count 35 tools.
2026-11-11 16:05:26 +04:00
German Khokhlov f612fc2180 Street Level: a posted view without a photo point grounds its look-at too
show_in_gods_eye_view measured a view's altitude from the terrain before
taking the point the camera looks at; a view posted straight into the
embedded app used the ellipsoid altitude, so a camera over high ground
opened photos kilometres ahead. groundedLookAt moves to the view module,
and the embedded app uses it with the app's terrain heights for a posted
street_level that names no point.
2026-11-11 13:46:10 +04:00
Said Turksever e0fedc13dd Street Level: a link whose source has no working key says why 2026-11-11 09:21:06 +00:00
Said Turksever f878efe22d Merge commit '0ceee8df40b97c6c693e86a4443794cd4ed1ff35' into HEAD 2026-11-11 08:54:28 +00:00
Sameh Khamis 619c19ea67 Application extras come from the renderer plugin; framing, occlusion and panel drawing are contract ports
A renderer plugin may supply applicationHooks(renderer) for what only its
renderer has (map engine, own credits, stale commands, QA handles). What every
renderer should do moves onto the contract: controls.keepEarthFramed (behind
the keepEarthFramed capability), query.occlusionTest (behind occlusionTest),
and panel drawing, which keepPanelRendering now does through resize and
frame.renderNow through the contract. renderNow throws when the frame fails to draw.

The Cesium port installs its zoom-out guard through keepEarthFramed (a setView
no longer cancels its turn) and answers occlusionTest with the scene's probe;
the stub answers it with a horizon test.
2026-11-10 21:17:56 -08:00
Sameh Khamis a755f63638 Merge origin/main: shipwrecks, news, transit fronts, signal-lost trails and uncredited photos on the renderer's ports
Upstream's layers and changes are carried onto the ports, with no Cesium
outside src/render and no reach into the viewer:

- Shipwrecks draw as one icon set, clicked through the input dispatcher.
- News draws through draw sets, the camera port and the input dispatcher;
  its beacons pulse each frame through the frame port.
- The scene occlusion probe moves into src/render/cesium and reaches
  detection through a new application hook, createOcclusionProbe; its
  private Cesium reads go through internals.js.
- Flight and military trails, the stale and SIGNAL LOST cue, coasting and
  following the world clock run on the draw and frame ports. GPU icons
  follow the scene clock while the world clock is followed, and fade when
  stale. A report that holds is not planned again every tick.
- Vessels are keyed by their record id.

The stub boot now enables military, shipwrecks and news as well.
2026-11-10 20:03:28 -08:00
Sameh Khamis 16c7034c28 Show the renderer's credits in the application's own line
- On a renderer whose plugin does not show its credits in a display of
  its own (the ownCreditDisplay hook; Cesium's does), the application
  shows what the credits port lists at the bottom left (#gev-credits):
  inline credits on the line, the rest, the layers' data credits among
  them, in the Data attribution list it opens. The button and list are
  keyboard operable; Escape closes the list and returns focus. Text is set
  as text; links and logos keep only safe schemes.
- The panel, Cockpit and overlay layouts keep clear of it as of Cesium's.
- The stub boot check fails when the credits line is not shown or its list
  is empty; it keeps its report when the run stops early, counts only the
  dev server's providers and other origins as feeds, and a failed default
  renderer load is retried without dropping a newer one.
2026-11-10 18:29:47 -08:00
Sameh Khamis 1fbe546531 Follow through the camera port in the remaining tests
- The tests that faked a follow by setting the viewer's tracked entity,
  or by raising its change event, follow through the camera port
  (followEntity, or a port with follow and followChanged), and check
  followedOf: camera handoffs, globe rotation, tilt, ground guard,
  vessels, ALPR, CCTV, Contacts, radio, orientation, share links and
  follow offsets, the tracked readout and the shell's camera listeners.
- The fake Cesium camera port delivers followChanged from the port itself.
- A ride handed to another aircraft is adopted by the follow's change, as
  the application does, not by the test calling the adoption.
- The unbound-factory record lists the scene, the map defaults, share
  restoration and the World Packet as entries whose caller loads the
  factories; the map startup test stubs the default renderer load.
2026-11-10 18:10:14 -08:00
Sameh Khamis 9a13aeab48 A photoreal base that fails to come back keeps the stack before it
- The map source controller waits for a base that loads as it is shown
  (the globe engine's tilesetReady) before it takes the stack before it
  down: one that fails throws there, so that stack and its imagery stay
  and the error is reported, as from any failed switch. The Cesium map
  engine has no tilesetReady, so its switches are unchanged.
- A failed default renderer load is tried again by the next call, and
  the standalone page's early load does not report a failure nobody
  awaited yet.
- The adapter ratchet's on-demand import rule refuses a default or an
  empty destructuring.
- The stub boot check fails a layer whose manager answers false rather
  than throwing, or that is not on (or off) afterwards; a field drawn
  counts as drawn; the dev server is closed when the browser cannot
  start.
2026-11-10 18:10:07 -08:00
Sameh Khamis ae4fbb5053 Load the default renderer as the page starts, and follow through the camera port in tests
- The standalone page starts loading the default renderer as it starts
  (loadDefaultRenderer), so Cesium arrives beside the page's own setup,
  not after it; the scene takes a plugin or a promise of one.
- Where a follow target's layer has no display position yet, the followed
  position is the target's own position at the frame port's scene time.
- The globe engine's photoreal base that fails to come back is off again
  and the globe shown; a later switch tries again. The draped-imagery host
  asks the map engine whether the globe is shown where the renderer cannot
  say. The scene resizes the renderer with its container.
- Cockpit and voice tests follow through the camera port (followEntity),
  not by setting the viewer's tracked entity; the fake frame port has a
  scene time.
2026-11-10 17:44:29 -08:00
Sameh Khamis 6daf63d90c Start the application through the contract, not on the Cesium viewer
The application scene takes a renderer plugin and no longer refuses one
without a Cesium viewer. It loads the default (Cesium) plugin only when it
is given none, so a page on the stub never loads Cesium.

- Every layer and tool is handed the application's own scene object
  (createSceneHost): the container and isDestroyed(), bound to the
  renderer, the same on Cesium and the stub.
- What only Cesium needs at startup is done in its plugin's create: the
  free-look height limit, and keyboard access to its credits' expand link
  (creditKeyboard.js moves into the adapter).
- What a plugin may hand the application beside the contract goes through
  provideApplicationHooks, each hook optional: Cesium's map engine, stale
  command trimming, inline panel rendering, viewerDrawsEntity, the zoom-out
  guard, and the viewer QA scripts read from window.__godsEyeView.
- The map stacks, and the photoreal base the scene loads, switch through
  the renderer's own map engine (mapEngineFor), else its globe port
  (globeEngine.js). The Cesium engine takes the scene object and changes
  the viewer behind it.
2026-11-10 17:18:48 -08:00
Sameh Khamis 8ff22f1a12 Merge main into feat/shipwrecks
Main added the News layer at the same places: both layers are kept in the
layer names, panel order (News stays last of Events), standalone sources,
voice manifest, credits, DATA_SOURCES and the CURRENT-STATE table. News took
share-link token 00 first, so Shipwrecks moves to 01 (ledger, registry,
CURRENT-STATE and the token tests). The catalog now has 40 layers and the
share-link registry 38. Shipwreck strings are added to the new Hebrew
catalog; the other catalogs keep both sides' strings.
2026-11-10 14:03:39 -08:00
Mazeyar Moeini FeizabadiandClaude Fable 5.2 3342d7a07a Merge origin/main into review/pr-1593
Conflicts: docs/CURRENT-STATE.md layer table, src/ui/layerPanel.js imports,
src/data/dataCredits.test.mjs imports; both sides kept.

Co-Authored-By: Claude Fable 5.2 <[email protected]>
2026-11-10 21:20:15 +01:00
German Khokhlov e34b5103c6 Street Level: shorter comments and docs
- Comments in the action, the layer, embed, the Mapillary policy and the
  controls say why in fewer words; restatements of the code are gone.
- CURRENT-STATE's "Show me X on Street View" section is a list by topic and
  no longer says the browser gate aims at coverageLines.
- TOOLS.md's street-level view paragraph is shorter.
2026-11-10 23:54:16 +04:00
German Khokhlov f3996da0af Street Level: a landed link, a replaced photo and a retired lookup keep their state
- A link's photo step compares with the navigation token its own restore
  flight owned, so a navigation after the flight landed (while the layers
  still load) keeps the camera.
- A request that switches the source keeps the open photo up until it is
  replaced (holdViewer), so EXPAND stays across sources.
- A lookup given up while it looked leaves the open photo and the panel as
  they were, also when it found nothing or failed.
- A failed replacement shows its error inside the expanded viewer.
- A replacing lookup stops a playing Mapillary sequence before the found
  photo opens.
- The action refuses coordinates outside the globe, keeps a name given with
  coordinates as its label, and fly: false keeps the camera only for
  coordinates (its test-only entity and query branches are gone).
- Numbered entities carry their label; a view's street-level point is a pair.
- Mapillary's nearest search always asks for 50 m and 100 images.
- Tests: the lifecycle reproductions, PLAY on replacement, out-of-range
  coordinates, half a point, and the named label; three layer tests share
  enabledLayer; the second payload digest is gone.
- Docs: the tool count, the panel freshness rule, armed: false, the photo
  replacement, the browser-gate comment and a shorter changelog fragment.
2026-11-10 23:48:57 +04:00
Said Turksever 9c73939425 Street Level: leave an interrupted link and an overtaken view alone (gekh review)
- A pasted or start-up link opens its photos only when its restore's camera
  landed: a drag or search during the restore flight keeps the camera.
- A posted view whose photo step was cancelled or superseded no longer closes
  the viewer or flies; one that found a photo it could not load keeps the error.
- openNearest gains `replace` (keep the open photo while it looks, close it
  only when nothing opens, so EXPAND stays) and `proceed()` (asked before a
  found photo loads); the action uses both, so a navigation, a gesture or a
  hiding mode during the lookup loads no billed panorama.
- Mapillary's timeout message is a msg() string with all eleven translations.
2026-11-10 15:12:50 +00:00
Said Turksever 5370b8a268 Merge upstream main into pr/street-level-show-action
gevActions.test.mjs: keep the PR's street-level tests and main's analyst display tests.
2026-11-10 14:59:39 +00:00
Sameh Khamis 7a376ebefc Make quality settings detail only and fold ctrl-wheel zoom into the camera's zoom inputs
Quality no longer switches clouds or water (their ports are gone) and its
atmosphere and post-processing settings are low or high detail; whether the
sky or a pass shows stays with globe.sky and effects. The separate
input.ctrlWheelZoom switch is gone: 'ctrlWheel' in the camera's zoomInputs
also relays trackpad pinches, which the application turns on.
2026-11-10 03:35:35 -08:00
Sameh Khamis 077576ed99 Merge main through #1641 into the renderer seam
Takes main's per-point mesh floor readings (#1642) onto the seam's
port-based sampler: a spot refused only while the cell's DEM prior was
cold is probed again, each spot is recorded once, a cell keeps at most
sixteen readings, and grounded flights read the floor at the contact
held inside its sticky cell.
2026-11-10 02:39:59 -08:00
Sameh Khamis e48ed3eb9e Merge main through #1637 into the renderer seam
Ports the cockpit bridge view, the orbital view riding a satellite with
ground-site focus, satellite classes and draw-mark row actions onto the
renderer contract. The orbital view's imagery look-ahead pre-load is
dropped (no contract member); tiles load as they come on screen.
2026-11-10 01:35:00 -08:00
Sameh Khamis 2b60531c3c Merge main through #1634 into the renderer seam
Brings in the CCTV opening camera, the Iceland, Giroc HLS, Taiwan, Quebec,
Ottawa and world camera packs, the world clock and timeline, the zoom-out
limit and registered-only layer state, ported onto the renderer contract:
the sky follows the world time through the frame port's setTime in
preUpdate, the Quebec overlay reads the eye, projects and redraws through
the camera, query and frame ports, launches hide pending missions through
their draw records, and mission orbit rings turn on the scene clock.
2026-11-10 00:31:23 -08:00
Sameh Khamis 9a2e2ecddd Merge main through #1616 into the renderer seam 2026-11-09 23:42:15 -08:00
Sameh Khamis 020a433b51 Merge main through #1591 into the renderer seam
Brings in the wildlife sightings layer (#1591, iNaturalist and Acartia
sightings). Its badges, density glow and privacy cells draw through the
draw port: the badges and the glow are icons sets (iconCollection.js
batches point writes into one upsert per task), and the privacy cells are
ground-clamped shapes and lines sets swapped whole. The eye, the view
rectangle, clicks, projection, ground readiness and frames come from the
camera, query, input, globe and frame ports, so the layer, its card and
its placement no longer import Cesium.

Differences from main: the density glow is drawn as pixel-sized splats
(56 px) instead of metre-sized ones with a near fade; the card's pan eases
with cubicOut, the contract's nearest ease-out; ground heights are
resampled when the globe's load progress settles or its surface changes,
rather than on tileset load events.

Also fixes two things the last merge left: a double-click that starts on
the followed track and ends off it reaches the renderer's own follow again
(a press that cannot end a double-click on the track gives its hold back
at its release), and the Active Fires heat drapes under the weather
imagery, so weather turned on after it stacks above. CURRENT-STATE notes
that the 2D and Columbus scene-mode checks are gone.
2026-11-09 23:06:26 -08:00
Sameh Khamis 96764f85ca Merge main through #1532 into the renderer seam
Brings in voice camera tilt (#1520) and free look with globe-in-view
recovery (#1532). The tilt and look maths in cameraVerbs.js and
globeInView.js run on camera poses and the geo helpers instead of Cesium.
The free-look height limit lives in the Cesium adapter
(render/cesium/freeLookLimit.js), installed through the application viewer
hooks; the globe-in-view recovery that main added to app/viewer.js runs on
the camera port in app/globeInViewRecovery.js. The scene-mode checks are
gone with the 2D and Columbus modes the seam does not draw.
2026-11-09 21:34:03 -08:00
Sameh Khamis b9f8ac1ff0 Merge main through #1319 into the renderer seam
Brings in range ring visibility and sonar pulses (#1518, #1519), the
drone airspace layer (#1086), the Houston CCTV pack (#1125), typed chat
(#1507, #1545), in-view ground sampling for infrastructure (#1464) and
the CCTV model specs refresh (#1319).

What main added that reached Cesium or the viewer:
- Drone airspace draws its zones as clamped fills and draped boundary
  lines in draw sets and takes clicks from the input dispatcher, as fire
  perimeters does.
- Infrastructure ground sampling tests the view frustum and the horizon
  from the camera port's pose (geo/frustum, geo/horizon) and reads loaded
  terrain through the height queries.
- The awareness lifecycle reads the canvas, frames and whether the camera
  controls take input through the ports. The sonar echo field measures
  with the geo helpers.
- The range ring's pulses need a disc whose fill is computed per pixel
  from values set each frame, and an outlined line whose opacity changes
  without a rebuild. The draw port has neither, so that code keeps to one
  module, src/layers/awareness/rangeRingCesium.js, which is on the Cesium
  allow-list until the draw port can draw them. It draws only on a viewer
  with a Cesium primitive collection, and takes its primitives out of the
  collection it drew them in. On the stub the layer draws the
  ring without pulses as a haloed line through the draw port.

Also from review of the previous merge: tests that the scene's viewer
hooks install the zoom-out guard, and that an ambiguous area name is
settled by the ground at mid-screen, else where the camera stands.
2026-11-09 19:59:26 -08:00
Sameh Khamis fd42fc0afd Merge main through #1495 into the renderer seam
Brings in radio country coverage (#1206), the restored format scope
(#1527), the zoom-out guard (#1522), voice geometry and OSM places (#846)
and paired traffic flow density (#1495).

What main added that reached Cesium or the viewer now goes through the
renderer:
- The zoom-out guard reads the Cesium camera controller's own input, so
  it moves into the adapter (src/render/cesium/zoomOutGuard.js). The
  application installs it through the scene's viewer hooks, and a scene
  whose renderer gives no guard starts without one.
- OSM places draws its points as a draw set, clamped to the ground.
- The voice area actions read the view box and the view centre from the
  camera port.
- The voice workflow harness is test support, named as such where the
  recent-imagery doubles are.
2026-11-09 18:51:30 -08:00
Sameh Khamis a7f96313e9 feat(pointer): an application's own tool can take the pointer
createApplicationTools returns pointer: claim(owner) takes the pointer as
Draw does and returns its lease, or null while another tool holds it;
release(lease) gives it back; isFree() lets the application's own click
handlers yield, as the layers' do. This replaces drawShape, which this
branch added: Draw is as it was.
2026-11-09 16:56:59 -08:00
Sameh Khamis c073064507 Stack sprite layers by draw order, flights on top
Each sprite layer's icon or dot set is now made at a draw order taken
from SPRITE_LAYER_ORDER through the renderer's per-set drawOrder:
flights over military, vessels, directions, transit, bikeshare, FIRMS
and CCTV, whichever layer was turned on first. Picks name the topmost
first. The orders are negative, so selection highlights, route
endpoints, the tracked plane and every other set at the default order
still draw over all sprite layers, as they did before.

The raise-to-top restorer, the sprite registry and the primitive-name
lookups are gone, which takes spriteOrder.js off the viewer-access list.
Before, the restorer raised the layers to the bottom of the scene in the
order they were enabled, so flights usually ended up under the others.
2026-11-09 14:32:50 -08:00
Sameh Khamis 4c587a6d0f Application scene and conformance page leave the Cesium allow-list
The application scene is the composition root: it now takes everything it
needs from one adapter module (src/render/cesium/application.js), which
loads, shows and releases the photoreal tileset and hands out the viewer
hooks. The conformance page keeps importing the adapter's harness and scene
renderer, since running the suite on Cesium is its purpose. Both are named
in the ratchet as the only files outside the adapter that may import it,
each limited to those modules, by name only, and the modules may not hand
out the Cesium namespace. Only geoImportPins stays on the allow-list.
2026-11-09 12:58:45 -08:00
Sameh Khamis 26665e8390 Embed views and the application shell leave the Cesium allow-list
The embed views fly through rendererOf's camera port with geo maths, and
the panel render loop that keeps an inline panel drawing moves into the
Cesium adapter (src/render/cesium/panelRendering.js); the application
scene hands it to the embed views as `keepRendering`. The shell reaches
the camera, effects and globe through rendererOf and loads no Cesium
factories; whether Cockpit's aircraft is an entity of the viewer's own
comes from the scene's `viewerDrawsEntity`, wired in through the
controls. Callers handing the shell or the application tools a viewer
of their own load ./render/cesium/unbound once, as the ports' unbound
check now records.
2026-11-09 12:43:36 -08:00
Sameh Khamis e6d9ec0636 Starry sky and the application viewer move into the Cesium adapter
src/sky/starrySky.js and src/app/viewer.js are Cesium through and
through, so they move into the adapter as src/render/cesium/starrySky.js
and applicationViewer.js; the ./application/viewer export points there.
The celestial ring's precise ICRF rotation reaches the shell through a
Cesium-free registry (src/sky/icrf.js) that the sky provides as it
loads; the application's renderer loads it, and so does
./render/cesium/unbound. Both files leave the Cesium allow-list.
2026-11-09 12:31:46 -08:00
Sameh Khamis a8a9cc73a4 Map stacks off the Cesium allow-list: providers move into the Cesium adapter
The map stacks' imagery, terrain and Google 3D factories move into the
Cesium adapter (src/render/cesium/mapImagery.js, mapTerrain.js,
google3d.js); the ./maps/imagery, ./maps/terrain and ./maps/3d exports
point there. The catalog names its ion stacks by asset number, and the
map source controller and default sources are Cesium-free: they
build providers and switch imagery layers, terrain, tilesets and the
globe's visibility through a map engine (src/maps/engine.js) that the
Cesium adapter provides as it loads (mapEngine.js), through the
application's renderer or the ./render/cesium/unbound export. The
controller and createDefaultMapSources also take it as an `engine`
option.

src/maps/catalog.js, controller.js, imagery.js, terrain.js and google3d.js
leave the allow-list.
2026-11-09 12:11:42 -08:00
Sameh Khamis 4da477a654 feat(draw): hand one drawn area or line back to the application
createApplicationTools returns drawShape({ shape, signal }): it opens Draw
for one area or line and resolves with its Polygon or LineString without
placing a mark, or null when draw mode is left, the signal aborts, a newer
request replaces it, the pointer is held elsewhere or the tool goes. The
shape controls cannot change the asked-for shape, and a shape across the
antimeridian is refused as a row's actions refuse it and drawn again. It
also returns pointerFree, so an application's own click handlers yield to a
tool holding the pointer, as the layers' do.
2026-11-09 07:16:14 -08:00
Denis Groshev 0fdde159cb Merge branch 'main' into denis/gev-news-layer
# Conflicts:
#	DATA_SOURCES.md
#	docs/CURRENT-STATE.md
#	src/data/local_data/natural_earth/README.md
#	src/i18n/same-as-english.json
#	style.css
2026-11-09 15:35:56 +01:00
Sameh Khamis cf72c7857d Cyber contact sweep goes through the effects port, off the Cesium allow-list
The cyber sonar scene now sets a screenModulation sector each tick that
draws and at the renderer's sonar cadence, and clears it outside the Cyber
map theme. A renderer without the capability, or one that stops listing
the pass, leaves markers native and reports the contact GPU unavailable,
while the HUD sweep keeps its clock. The old Cesium command wrapper is
removed; cyberSonarGpu.js and cyberSonarScene.js leave the allow-list.
2026-11-09 05:59:48 -08:00
Sameh Khamis 8bcaced6ad Take the input dispatcher off Cesium: pointer input from the renderer's input port, picks from the query port
The dispatcher now builds on renderer.input and the query port, with
positions as plain {x, y}. Its viewer access count is zero and it leaves
the Cesium allow-list. Layers that read the raw engine pick read the Hit,
drawHit or event.native instead, and pickRegistry's resolvePickId and
pickContact take a Hit, with the raw versions kept in the Cesium adapter.

rendererOf gains findInput, provideUnboundInput and provideNativeClick.
event.native carries the engine's pick, drill and pickWindow, and picks
through the follow helper happen inside it. An unbound input port
survives the viewer being bound until it is released.

The query port's pick memo is now per task rather than per frame,
because Cesium's own picks advance the frame number. A click on the sky
skips the depth pass when nothing is on the ray. Touch contact search
keeps its eight-deep drill in a 14x14 window.
2026-11-09 00:47:30 -08:00
Sameh Khamis 04a764ed86 Draw the Recent Imagery box preview through the draw port, off the Cesium list
The box being dragged was two Cesium entities on a data source of its own.
It is now a clamped colour rectangle in a shapes set and a draped dashed
outline in a lines set, both unpickable, with the same colour, alpha,
width and dash length. The Cesium draw port now redraws a moved clamped
fill in the frame it moves, so the box shows on every frame of the drag.
The fill shows once the box has an area. The outline shows once the box
has any extent, so a drag along one axis still draws a line. The last box
is kept hidden between drags, and the next drag moves it.

markBaseTileset moves to a Cesium-free module, src/render/baseTilesets.js.
The globe port reads it and re-exports it, so a tileset a caller marks
as its base is still draped on. rendering.js no longer imports Cesium or
reaches the viewer and leaves the Cesium allow-list. The application's
tools loaded the globe factory only through it, so embed.js now loads it.
2026-11-08 21:18:56 -08:00
Sameh Khamis 27847bd063 Draw rows take an application's own actions
createApplicationTools({ drawMarkActions }) adds an application's buttons to
the rows of drawn areas and lines. An action gets the shape's id, kind, name,
row title and [lon, lat] geometry, and what it returns or resolves to is a
note under the row. The standalone shell passes none, so the open-source
build is unchanged.
2026-11-08 18:12:32 -08:00
Said Turksever b7531e655d Merge upstream main into pr/street-level-show-action
Locale conflicts: main's catalogs plus the PR's 10 street-level strings.
2026-11-09 00:11:38 +00:00
Said Turksever efaeece117 Merge upstream main into pr/street-level-show-action
Locale conflicts: main's catalogs plus the PR's 10 street-level strings.
2026-11-08 20:30:04 +00:00
Sameh Khamis 137639dd38 Merge branch 'sameh/world-clock' into sameh/world-timeline-launches 2026-11-08 12:13:46 -08:00
Sameh Khamis 84f3476dd3 Merge remote-tracking branch 'origin/main' into sameh/world-clock
# Conflicts:
#	index.html
#	scripts/package-boundaries.json
#	src/app/scene.js
#	src/i18n/locales/ar.json
#	src/i18n/locales/de.json
#	src/i18n/locales/es.json
#	src/i18n/locales/fr.json
#	src/i18n/locales/it.json
#	src/i18n/locales/ja.json
#	src/i18n/locales/pt.json
#	src/i18n/locales/ru.json
#	src/i18n/locales/uk.json
#	src/i18n/locales/zh-CN.json
#	src/i18n/locales/zh-Hant.json
#	src/layers/launches/ingestion.js
2026-11-08 12:13:41 -08:00
Itallo BrandãoandClaude Opus 5.5 584138decf Merge main into feat/shipwrecks
Keeps main's reformatted layer table in docs/CURRENT-STATE.md and adds the Shipwrecks row to it.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-11-07 18:37:28 -03:00
Sameh Khamis b9248bfce5 Keep the scene command trim in the Cesium adapter and take its installer off the Cesium list
The private-field trim of Cesium's reused per-pass command arrays moves to
src/render/cesium/sceneCommandRelease.js. The installer waits for the
renderer frame port's postRender after each layer disable and calls a trim
the application scene hands over, so it no longer touches the Cesium scene.
2026-11-07 05:29:57 -08:00
Sameh Khamis f509c688e8 Check annotation visibility and frame marks through the renderer's ports
The annotation engine no longer imports Cesium. The camera assist tests
whether a fresh mark is in view against the frustum planes of the camera
port's view-projection, with the same one-metre sphere Cesium's culling
volume used, and asks the query port whether it is behind the globe. The
view-projection is in world coordinates, so the test now also holds when
the camera has a reference frame of its own. Framing uses the camera port
and the geo helpers for spheres, angles and distances. It leaves the
Cesium allow-list.

The window.__CESIUM__ dev hook the QA scripts read moves to the
application viewer module, which every app boot loads before the viewer
is made. A new test covers the assist: marks in view, off the frustum,
behind the globe, and a camera that cannot answer.
2026-11-07 04:13:56 -08:00
Sameh Khamis 2b66c46a30 Show or hide the app's starting globe through the renderer's globe port
At start-up the app now sets the globe's visibility through its bound
renderer's globe port rather than on the Cesium scene. The map
controller keeps writing the scene: it is a public entry, and on a
caller's own viewer the port would be one built just for it, whose
listeners outlive the controller.
2026-11-06 20:06:40 -08:00
Sameh Khamis 7eec2f828c Read what the camera follows through one module
src/data/followed.js answers what the camera follows: the camera port's
target, or the entity a layer still tracks itself, seen through the same
fields. Ownership checks, render holds, guards, voice actions, the CCTV
pacing and the navigation release paths read it instead of Cesium's
trackedEntity, so they keep working when layers follow through the port.
The release paths stop following, cancel the flight and release the
camera through the port. The rotate refusal names the followed target by
its name or label title.
2026-11-06 12:27:23 -08:00