The first press's picture of the track is there because a click on a
selected ship re-centres the camera. It applied to followed aircraft too,
widening their double-click hit area to wherever the aircraft was drawn
as the gesture began. Aircraft are back to the hit where they are drawn.
The ground clamp read the floor at the ship's last AIS fix while the camera
rode that fix dead-reckoned up to 180 s ahead, so a quay or bridge deck at
the old position could lift the eye. Vessels now read the floor at the
dead-reckoned target, as the water read already does; aircraft are
unchanged.
The radar centred on the ship's last AIS fix while the camera rode that fix
dead-reckoned up to 180 s ahead: at 20 kn about a nautical mile apart, so a
ship already passed still showed ahead. Own ship now sits where the camera
rides and each contact is dead-reckoned to the same moment; the query reaches
past the range for ships that have since moved into it.
Ships with no MMSI each get a key of their own instead of all sharing an
empty one on the scope.
A full-detail water read that sampled nothing (tiles not loaded) fell back
to the geoid, and while a full read ran, a loaded-tile read with one coarse
low probe did the same: on the Seine either dropped the eye ~27 m under the
water until the next read. An empty read is now no answer, and once a
full-detail read has answered only full-detail reads change the height.
The read sequence numbers go: only one full-detail read runs at a time,
so a late read can never be older than one already applied.
Voice entry tracked an aircraft first, which cleared the vessel selection
and ended the bridge, and then failed because Cockpit was still active:
no bridge, no cockpit, no selected ship, and voice said entry was
unavailable. It now refuses before it touches tracking and says to exit
the bridge first.
With a vessel selected and no aircraft tracked, Cockpit took C and stopped
it even when the bridge gate was shut, so the key did nothing and CCTV no
longer toggled. C is now taken only when the bridge can be entered.
The arrow keys also stay with comboboxes, spinbuttons, trees, grids,
menubars, scrollbars and text boxes on a bridge, which move with them.
Adds a complete Swedish catalog (2,961 messages) and registers sv in the
locale list, catalogs, language picker and package boundaries. Browsers set
to Swedish get it at once; ?lang=sv or the language picker choose it
elsewhere. Numbers and dates come out Swedish from Intl.
- docs/translations/sv.md: style (imperative without a pronoun, closed
compounds, decimal comma, space before units and %) and the glossary.
- Entries that stay identical to English on purpose (codes such as HDG and
FOV, product, place and source names) are listed under sv in
same-as-english.json.
- The picker-order test places Svenska after Português.
- docs/CURRENT-STATE.md and docs/TRANSLATORS.md list the new language.
The translation comes from God's Eye View Sverige, a Swedish fork, and was
brought up to date with main (wildlife sightings, event age filter, traffic
styles and the rest).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The camera port gains an optional followFrame() (capability followFrame):
the frame the eye is placed in now, as a column-major 4x4 matrix to ECEF.
Once a follow has framed the camera it is the follow's own frame
(east-north-up, or the orbit frame an autodetect follow chose), under
lookAt the target's east-north-up frame, otherwise the identity. setView
places a world pose and keeps that frame. The Cesium port reads it from
camera.transform, only when the capability is on; the stub from its own
eye frame. A conformance check covers the world, lookAt and enu-follow
frames, the offset in it, and setView keeping it.
src/ui/shareFollow.js now reads the pose, the frame and the follow offset
through the camera and frame ports: a shared offset is re-expressed in the
follow's own frame as before, satellites included, and the eye is placed
with setView at exact heading, pitch and roll, so a near-vertical view
keeps its roll. placeFollowEye returns false on a camera that cannot say
its frame. offsetFromHeadingPitchRange moves to src/geo/frames.js, shared
with the stub.
The flights and military layers now reach the renderer only through its
ports: motion, queries, state, tracking, enrichment, evidence and policy
read the camera pose, project through the query port, request and
suspend frames through the frame port, and key per-frame caches on the
frames drawn rather than the scene's frame number. Policy is plain data,
the enrichment view test is pose-based, and the tracked aircraft is an
icon in a draw-port set with a plain holder standing in for the entity
that Cockpit, the tracked card and share links read.
The mesh floor sampler can sample through the query port, excluding
named draw sets, and both layers use it that way. A pick of another
layer's tracked icon is never taken for one of a layer's own contacts.
Twelve layer files leave the Cesium allow-list.
Geo import asks the frame port for renders, the camera port for moveEnd and
the globe port's progress for the terrain queue running dry; its data sources
are added, removed and shown by the listed geoImportPins module. Voice capture
waits on the frame port's postRender. Visual settings toggle the infrared fog
through the globe sky port, and the anime style dims the Milky Way through a
sky getter it is given. The scope mask reads the camera height and listens on
the frame and camera ports. Recent imagery picks the view centre, reads the
view rectangle and the field of view through the query and camera ports.
Installations claim camera sensitivity from their rendering module. The
application shell loads the unbound globe factory.
Files off the Cesium list sized themselves by, listened on and set the
cursor of `viewer.scene.canvas`. They now read `canvasOf(viewer)` from
src/render/rendererOf.js: the bound renderer's canvas, else the viewer's
own, the same element. Recent Imagery's divider moves the split through the
globe port (`globeSplitTarget`, moved from the flood event into
src/ui/imagerySplit.js), and traffic flow passes the viewer to the listed
surface module (`viewerRoadSurface`) instead of reaching for its scene.
The test fakes give their viewers a canvas, and the fake renderers report
it, as the Cesium renderer reports the viewer's.
src/data/geoFileImport.js now only reads, bounds and sanitizes the
imported files (GeoJSON, GPX, KML and KMZ). Loading the parsed file as a
Cesium data source, scrubbing its entities, settling its ground pins,
the pin billboard collection and the footprint read for Fly-to move into
src/data/geoImportPins.js, which stays on the Cesium list as the
import's Cesium-bound part. The error, the entity limit, the one-minute
deadline and feature-name cleanup both parts use live in the new
src/data/geoImportShared.js; the reader re-exports them for its
existing importers.
Nothing changes for the person importing: the same files load with the
same refusals, styles, ground heights, pins and framing.
Cockpit now places its eye with the geo maths and moves the camera
through the camera port on the frame port's preUpdate, so cockpitCamera.js
and cockpitController.js no longer load Cesium and leave the allow-list.
Whether the aircraft still draws comes from a trackedEntityDrawn service,
which the application shell answers from the viewer's entities. The mesh
floor probe accepts the viewer as well as its scene.
The camera verbs size their keyhole fit by the renderer's canvas and listen
on it for the user's input, and the voice actions size their view samples
by it, rather than reaching through `viewer.scene`; a viewer with no
renderer bound answers with its own canvas, the same element. The test
fakes give their viewers a canvas, and a fake camera binding's renderer
reports the fake viewer's.
With no aircraft tracked, Cockpit can ride the selected AIS vessel. Entry
needs only Live AIS Vessels and a selected vessel; C, double-click and the
entry buttons (reading BRIDGE with a ship icon) enter it, while voice stays
aircraft-only.
The eye sits on the AIS position at a representative bridge height for the
vessel's type family, looks along true heading and moves along course over
ground. The last fix is dead-reckoned for up to 180 s between the layer's
refreshes, and on rivers and lakes the waterline is read from the rendered
surface around the ship rather than the geoid.
The bridge HUD shows speed and course over ground, a straight heading
tape, window mullions, the AIS destination as a reported voyage and a
heading-up radar of nearby ships (3 to 24 NM). The arrow keys look around,
Home or 0 looks ahead again. The vessel layer hides the ridden ship's
sprite and card, ignores scene clicks while held, and returns the camera
to the vessel's map view on exit.
The full-globe ring reads the eye from the camera port's pose, projects the
Earth's centre through the query port, paints on the frame port's
postRender and asks it for the frame that ends a focus flight, and flies
out through the camera port with a geodetic destination. The sun and moon
come from the shared planetary model in geo/celestial, rotated into the
Earth-fixed frame: the precise ICRF frame once its tables have loaded,
which the application shell supplies from the starry sky
(icrfToFixedAxes), and the pseudo-fixed frame before, as Cesium's own
fallback did. It still reads the viewer's canvas and container, which are
DOM.
projectEarthDiscToViewport keeps its scratch arguments: the eye-to-centre
vector is still written before the facing test, which radio navigation
reads after the call.
The annotations entry loaded the Cesium port factories only through the
ring; its world renderer, which stays on the list, now loads them.
The camera ground guard, place and landmark flights and imported-file
flights read terrain and surface heights through heightsOf, the one place
the app's height queries go, rather than asking the query port themselves.
With the annotation resolver off the allow-list, ground snapping, which
the application operations entry also reaches and which stays listed,
loads the Cesium camera factory for a viewer with no renderer bound.
The height docs say what the Cesium renderer answers without depth
textures: no surface or tiles height, and terrain from the loaded tiles.
The box selection tool no longer builds Cesium entities itself: its fill
and dashed outline live in createImageryBoxPreview in the recent imagery
rendering module, and the tool takes the preview as a dependency. The
cockpit contact card reads the nearest contact's position with the geo
helpers. Both files leave the allow-list.
Tests now inject the preview with the Cesium double, check that a second
destroy returns the same promise, and pin the nose-relative bearing to a
known contact.
The shell's camera snapshot now comes from the camera port's pose and its
restore converts with the geo helpers. The shell stays on the allow-list:
it still loads the Cesium camera and effects factories for the entries
that reach it.
The map orientation controls pick the view's centre through the query
port (depth, then the globe along the pick ray, then the ellipsoid), read
the camera from the camera port's pose, and set the orbit frame through
the port's lookAt, release and setView. The eased orientation runs on the
frame port's preUpdate, the compass needle on its preRender, and the tilt
state refreshes on the camera port's moveEnd.
While the camera follows something, the orbit offset must stay in the
follow's own frame (a satellite's included), which only Cesium knows: that
step moves verbatim into placeFollowEye in shareFollow, which stays on the
Cesium allow-list. cameraOrientationControls leaves it.
The camera ground guard reads the eye from the camera port's pose, the
flight state from the port, and the surface under it from the query port's
heights, and lifts through the port. Place and landmark flights read the
terrain height from the query port and build their targets with geo.
Framing ranges read the field of view from the pose (the frustum's
wider-side angle, as it read before). An imported file's flight frames its
footprint, plain lon/lat/height points, with geo's bounding sphere and the
port's flyToBounds; walking the file's Cesium data source for those points
moves into the file importer, which stays on the Cesium allow-list.
The Cesium query port answers terrain heights without depth textures, as
the height service always has: only the drawn surface needs them.
cameraGroundGuard, locations, cameraFraming and flyToDataSource leave the
allow-list. The annotation resolver, still listed, loads the camera
factory for the application operations entry, which reached it through
locations before.
The navigation controller and the location navigation cancel flights and
read the camera's place through the camera port. Point-and-ask's camera
pose key and its "around here" radius read the camera port's pose; its
entity pick moves into the input dispatcher (pickAt), which picks as a
click does, so the follow's helper still reads as its target.
navigationController, locationNavigation and pointerPick leave the Cesium
allow-list. Their package entries (./ui/navigation and three voice
entries) no longer load the Cesium adapter: given a viewer of a
caller's own, they find its camera once the caller loads
./render/cesium/unbound. They are listed as such in the unbound camera
test, which fails if one starts loading the factory again.
The station discs are now one draw set of ground-clamped filled ellipses per
layer, with the same band colours, alpha and radius, and their readings as
item meta; they had no visible outline before either (Cesium turns outlines
off on clamped entity ellipses). The readout's in-view list reads the view
rectangle through the camera port. The layer no longer imports Cesium and
leaves the allow-list; a caller handing it a Cesium viewer of their own,
with no renderer bound, loads the ./render/cesium/unbound export once first.
Double-clicking a station no longer starts the viewer's entity follow, since
draw items are not entities.
The orbit controller and the frame-rate monitor had left the Cesium
allow-list but still hooked the scene's preRender and postRender events.
They now listen through the frame port; the monitor looks the port up
each time it is shown, so a renderer bound after it was created is the
one it counts.
The renderer bridge builds and keeps an effects port over a viewer no
renderer is bound to, with a factory the Cesium effects module provides,
so visual settings on a caller's own viewer draw their styles, bloom
and sharpen as before and give the scene's bloom back when destroyed.
The application shell loads the factory; a test checks every export
that reaches the effects lookup loads it.
VisualEffects defines each preset on the renderer and keeps its own
records of intensities and parameters, written through to the port, so
crossfades, the anime sky fade, bloom and sharpen behave as before. The
renderer animates the animated styles. Sensor picks read the style
records instead of the renderer's stages. The application renderer now
has the effects port and its capabilities.
The tracked card, screen annotations, north-up, share links and Cockpit
ask data/followed.js what the camera follows, so they work the same when
a layer follows through the camera port. followed.js gains
entityFollowTarget (a FollowTarget whose presentation reads the drawn
entity's record), resumeFollowing and followedPosition.
src/data/followed.js answers what the camera follows: the camera port's
target, or the entity a layer still tracks itself, seen through the same
fields. Ownership checks, render holds, guards, voice actions, the CCTV
pacing and the navigation release paths read it instead of Cesium's
trackedEntity, so they keep working when layers follow through the port.
The release paths stop following, cancel the flight and release the
camera through the port. The rotate refusal names the followed target by
its name or label title.
- releaseCameraOwnership marks the camera released before stopping, so a
flight navigation asked to preserve survives; exit also releases it, so an
inactive layer never cancels another owner's flight.
- The failure toast names the mission index only when its error is from the
current Context attempt (stats.errorAt), not an earlier one.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Review fixes on top of #1578:
- Exiting Space Missions cancels the layer's own camera flights again (entry,
roster preview, mission focus); only a flight navigation started after
releaseCameraOwnership() runs on.
- A failed first index load says so: "Space Missions unavailable: the
mission index could not load. Try again later." on both the Context and
Data Layers routes, instead of a generic transition toast. Translated.
- Regression tests for both; docs and changelog describe the real feedback.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The embed view, the celestial-ring focus, the ground-guard lift, the
Bhote Koshi approach and orbit, launch selection and replay flights, and
the cockpit's view and takeover now drive the renderer's camera port.
The contract gains a sineInOut easing, pinned by a conformance trace.
A viewer with no renderer bound, such as one a caller of a public
export brings, now gets a camera port too, as it already got an input
port: cameraOf builds one over the viewer's own Cesium camera and keeps
it for the viewer's life, until a renderer is bound. The Cesium adapter
provides the factory as it loads; code that reaches Cesium takes cameraOf
from the adapter so the factory comes with it, and findCamera answers
null where a missing camera is not an error (HUD, share link, world
focus, Recent Imagery's ZOOM IN). A test walks every package export and
fails one that can reach the bridge without loading the factory.
A destroyed viewer gets no camera and lets go of a built one, and the
application renderer stays bound until its viewer is destroyed.
Wildlife Sightings (#1591) published share token 9, so News takes the
next free token, 00. The token tests read the ledger before both where
they were written against it, and the README counts both layers.
Main's wildlife-sightings layer took share-link token 9, so shipwrecks
takes the next free token, 00. Locale, docs, format-scope and voice
manifest conflicts keep both sides. Ledger and registry tests now model
the ledger before shipwrecks took 00, and layer counts include both
new layers.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
flyToBounds takes an easing, as flyTo does: in the contract, the Cesium
port and the reference recorder, pinned by a new conformance trace.
The flights of radio, awareness, CCTV, submarine cables, cyclones, the
launch preview, installations, ALPR, street-level framing, recent
imagery, weather and world focus now go through the renderer's camera
port. Street-level framing cancels its own flight handle rather than
whatever flight is current. worldFocus.js no longer reaches Cesium and
leaves the allow-list.
Layer pose reads stay for each layer's own slice. The local GeoJSON
flight stays on Cesium: gods-eye-view/infrastructure is used with plain
Cesium viewers that have no renderer bound.
The Cesium camera port moves into render/cesium/camera.js, with the
listener list and position conversion shared from common.js. It now
covers flights (flyTo, flyToBounds, cancelFlight, flying), lookAt and
release, command hooks, and a flightEnd event for the flights it starts.
A flight's end that Cesium raises inside one of the port's own calls is
delivered once Cesium's call returns, so its callback sees the flight
let go of. A flight Cesium declines to start, mid scene-mode morph,
ends as cancelled instead of never settling.
Flight traces run in Node on the recorder's headless camera with a
virtual clock; the browser harness keeps the instant traces.
The startup fly-in, landmark and viewport flights, share-link restore
and the shell's camera state now go through the port. camera.js and
sharelink.js leave the Cesium allow-list.
The first camera-family slice. The camera port's events move into a
shared module (render/camera/events.js) that the stub and the Cesium
port both use: listener lists, delivery with errors reported, and the
contract's per-listener `changed` measure.
The Cesium port gains:
- camera.on: `changed` measured per listener on every tick, where Cesium
measures its single threshold (the counts match Cesium's own at each
threshold); moveStart and moveEnd relayed from Cesium's camera;
- camera.viewRectangle, in degrees (now in CESIUM_CHECKS);
- lon and lat in pose, and NaN where Cesium has no cartographic position.
Code that still holds the viewer reaches the renderer through
rendererOf(viewer); the application renderer binds it on create and
unbinds on destroy.
The HUD reads its telemetry from the camera port and no longer imports
Cesium (off the allow-list). The share link writes the hash from the
pose. Its restore path stays on the viewer's camera for a later slice.
Behaviour changes:
- The share link listens to `changed` at its own 0.5 threshold, not at
whatever global threshold layers had set, and also to moveEnd, so the
hash always catches up with where the camera comes to rest.
- The HUD's and share link's camera callbacks run from the port's single
relay, ahead of other moveStart/moveEnd listeners, and a throw in one
is reported to the renderer's error listeners instead of escaping from
Cesium's render.
The Cesium renderer now creates the input port and exposes it as
renderer.input. The input dispatcher becomes an adapter over the port:
one port listener per event type, fanned out to its subscribers with the
ownership check read once per event, keeping the legacy event shapes.
- Ctrl+wheel zoom is switched on through renderer.input.ctrlWheelZoom.
- A dispatcher made for a viewer with no port creates its own port with
takeStock: false, which borrows the stock select and double-click
follow only while they are suppressed.
- The stock actions see the press as it began: a click whose press
started while select or follow was held off never runs them.
- A scene accepts one input port; cesiumInputOf(scene) returns it.
- Releasing one mouse button while another is held no longer gives the
held button a click. Cesium still ends that press.