Review of #966: with a Google Maps key but no Mapillary token, switching
Street Level on read KEY REQUIRED / "Needs MAPILLARY_CLIENT_TOKEN" with
nothing about Street View, which stayed off (billing), so the layer looked
broken.
- While the switched-on providers lack their keys, the layer reports the
switched-off ones that would draw with a key already set
(keyAlternatives: Street View on Google 3D with a Google key). The
panel's KEY REQUIRED tooltip, its coverage line and the layer row's
tooltip then read "Needs MAPILLARY_CLIENT_TOKEN — add it in Provider
Settings, or light STREET VIEW to use your Google Maps key"
(keySetupWithAlternatives). Off Google 3D the plain KEY REQUIRED stays.
Street View stays off by default.
- OPEN STREET VIEW moves beside the coverage hint: at the default panel
width the PROVIDERS row has no room for it, so it wrapped onto a line of
its own.
- The panel gate's corner drag names what lay under the pointer when it
fails.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Maintainer follow-up to #966 review:
- A failed panorama-details lookup now waits DETAILS_RETRY_COOLDOWN_MS
(5 s) per panorama before a view event can retry it, so dragging the
view after a failure no longer issues a lookup on every pov change. A
success clears the pause; one panorama's failure does not delay another.
- SECURITY.md notes that allowing maps.googleapis.com in script-src also
trusts its JSONP endpoints, an accepted limitation alongside the
existing 'unsafe-eval' allowance.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- No pointer cursor over coverage lines (no other layer has one); a click
test replaces the hover tests.
- No legend: one source, one colour.
- The on-globe credit lives in index.js; credits.js is gone.
- Billboard glyphs are SVG data URLs with the same geometry, so tests need
no canvas stub.
- The tile cache keeps the 120 most recently used tiles, same 24 h TTL,
instead of a byte budget; listTileLayers was test-only.
- providers/mapillary/ is flattened into the layer and its policy merged
into one policy.js; the source's method list is a literal in the catalog.
- One fakeCesiumViewer for the layer tests.
- The fixture gate keeps the steps the unit tests do not cover: coverage and
credit, a rejected key, line -> cone -> photo, close, a keyless page.
Co-Authored-By: Claude Fable 5.1 <[email protected]>
- A failed or missing key status is asked again on the next switch-on, and
the check gives up after 10 s instead of holding LOADING forever.
- Waiting for the key status reads as LOADING while the layer is on.
- Esc shrinks the photo in full screen too, before the panel's own Esc.
- Destroying the panel with the iPhone popover open leaves no popover behind.
- An empty view says whether the filter emptied it.
- A freed upstream tile slot passes straight to the oldest waiter.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- visibleBbox: no view-rectangle fallback or grid option; its one caller
always ranges the rays
- tilesForBbox returns the tiles; normalizeBbox takes arrays only
- viewerHost: no try/catch around adapter calls that catch for themselves
- coverage: counts come from the drawn sequences; no sequenceCount export
- one keyStatusLabel for the pill and the layer list
- no constructor source check, double-init guard or selectSequence /
clearSequence on the layer
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A release with a modifier held left the LEFT_DOWN/LEFT_UP flag stuck, and
right, middle or modified drags picked every frame. Track pointer buttons
instead, as main did, and pick a still pointer again on moveEnd.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- OPEN STREET VIEW in the PROVIDERS row opens Street View's nearest
panorama at the ground under the middle of the screen, without moving
the camera: Street View no longer needs a pointer. It is disabled (and
says so) until the camera is at street zoom.
- Off the Google 3D map Street View does not appear at all: no chip,
legend swatch, globe credit, layer source or button, and Google's script
is not loaded (the viewer has no prewarm; the script loads on first use).
The share option keeps the user's choice for when Google 3D returns.
- A ground click measures the camera height at the click rather than
reading the cached flag.
- A chip without a usable key explains it instead of lighting; it darkens
beside a lit chip, and the other chips keep switching, so a refused
Street View key cannot lock Mapillary out.
- The gate checks that nothing of Street View shows off Google 3D even when
a share link switches it on, presses OPEN STREET VIEW on Google 3D, and
asserts that each chip it switches really switched.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Google's Maps Platform terms forbid Street View imagery beside non-Google
maps, so the provider declares requiresMapStack: 'photoreal': off Google
3D its chip is dashed with the reason, lookups and opens skip it, and
leaving Google 3D closes its panorama.
- Ground clicks: only a click on the map itself (scenePick.isSurfacePick:
nothing picked or Google 3D tile content) at street zoom opens Street
View, and the camera stays put; higher up the hint says to zoom in.
scenePick.pickGroundPosition replaces the copy in Directions.
- Viewer: poses go out at once and again when the date and address
arrive, so an open never hangs on that lookup; one lookup per panorama,
seeded by the nearest lookup; a close settles a pending open; failed
lookups are asked again; poses follow position changes, not pano_changed.
- Loader: the gm_authFailure handler is installed once, so a retried load
reports a refusal once.
- Viewer host: a prewarm that lands after another provider took the host
is released; FIT/FILL availability is set on every open.
- Provider: a refusal while switched off reports no error over another
photo; SINCE compares against the end of Google's month; messages name
the referrer and network causes; FLAT says Street View is 360° only.
- The layer row names the key of the providers that are on; the MCP panel
CSP admits Street View's tiles, control images and photos.
- Tests for each, against fakes that now follow Google's event order; the
browser gate restores its state, waits instead of sleeping, aims its
panel clicks and corner drags, and asserts the camera stays put.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Google Street View registers beside Mapillary as provider `google`. It runs
on the Maps JavaScript API with the browser GOOGLE_MAPS_API_KEY, loaded on
first use (mapsLoader.js), and uses Google's own StreetViewPanorama as its
viewer adapter, emitting provider-neutral poses (address and month in the
caption, a link to Google Maps, steps along Google's arrows, FOLLOW on
Google 3D). Its chip starts off because every panorama is billed to the
key; the share option is `g`.
Google offers no coverage layer for other maps, so the provider draws
none: with it on, a click on bare ground at street zoom opens its nearest
Google-collected outdoor panorama (groundClick.js). A key Google refuses
reads KEY REJECTED and fails a pending open at once; a lookup Google never
answers fails after 10 s.
Core: providers may declare `groundClick` and `defaultOn`; poses may carry
`capturedAtPrecision` and `title`; the coverage line keeps every
provider's hint; opening one provider's image releases another's
prewarmed viewer; FIT/FILL hides for viewers without render modes. CSP
script-src admits https://maps.googleapis.com. The browser gate gains two
Street View steps (the keyed one skips as 'no Google key' in CI).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Two regressions from the slimming, found in review:
- Google 3D hides the globe, so groundUnderCamera returned null once the
ground caster was gone: in high cities (Denver ~1,600 m) the camera read
kilometres too high, the coverage zoom came out coarse and the visible box
slid kilometres ahead. With the globe hidden (or not yet loaded) the
ground now comes from the rendered surface (scene.sampleHeight), checked
for plausibility and ignored when above the camera. The plausibility check
is shared with photo framing (plausibleSurfaceHeight, sampledSurfaceHeight).
- Tiles were ranked from the camera's ground point alone, so a tilted view
from a few kilometres up (z13) could miss the tile at the centre of the
screen. They are ranked from viewFocus: halfway between that point and the
ground at the screen centre (or the nadir when the centre ray misses).
A test pins the 3 km / 70° case: the nadir ranking leaves the centre tile
out, the focus ranking loads it.
Also ignore .playwright-mcp/: its browser console logs can carry tokens.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The browser gate is one pass over the remaining flows: rail strip and
expand, coverage with fixtures, the ON/OFF pill, 360° and SINCE filters,
KEY REJECTED, nearest photo with caption, × close, phone fit, keyless
KEY REQUIRED on a second page and no page errors. Panel controls are
pressed through the DOM; pick-point search, line/cone clicks, the
framing-cancel, reload/share and status-route probes, the second
viewport and pointer-settling retries are gone (unit tests cover them).
Tests that pinned constants, copy, CSS or source text, or repeated
another test, are removed or merged. CSS loses an unused variable and
duplicate rules. Docs describe the slimmed feature; unused exports and
the layer's dead setCoverageFilter/refreshCoverage surface are removed.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The layer now owns its Mapillary parts directly: the provider registry,
pick router, multi-provider UI summary, params codec helper and provider
context are gone. createStreetLevelLayer({ source }) builds coverage,
sequences, the nearest-image lookup and the MapillaryJS viewer itself; a
single providerOn switch keeps the share link's `mapillary` option (off
draws nothing), and getParams/setParams keep { mapillary, pano, sinceDays }.
No z0-5 overview points: above 60 km nothing is drawn and the panel says to
zoom in; the proxy now serves only coverage z11-14. Tiles come from the
visible ground within range of the camera, ranked from the ground under it
(no line-of-sight ranking or near-range padding). MapillaryJS loads on the
first photo; viewer prewarm is removed. Key status, a rejected key and a
rate limit share one `blocked` state on coverage.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
FOLLOW is gone: no setFollow, follow state, map-stack availability or
handoff listener. Opening a photo still frames it with one flight through
the application's deferred navigation (begin/reassert), so a slow photo
never overrides newer navigation and tracking is released as before.
Ground casting is gone: groundCast.js, meshSampler.js, the surface mode,
the draped-to-cast swap and remesh. Coverage lines are always draped
GroundPolylinePrimitives (ClassificationType.BOTH); cones and the marker
clamp to the ground and keep the horizon cull. The terrain/meshFloor/ground
services and meshFloor.visibleTilesetLoaded are no longer needed.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A tile whose terrain lookup cast some lines kept castRequested set, so a
later refresh skipped it and the lines that failed stayed draped over
trees and roofs until the tile was rebuilt. A refresh now retries any tile
with lines still draped, and redraws it only when more of its lines can be
cast, so a tile that cannot be cast fully costs a cache check, not a
rebuild, per refresh. castRequested still stops the redraw from casting
again at once.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- A photo takes a deferred navigation ticket when it starts opening
(begin/reassert, the application's _beginDeferredNavigation and
_reassertNavigationHandoff) and frames only if that ticket still owns
the camera once loaded, so a slow photo no longer flies the camera back
over newer navigation or clears newer aircraft tracking.
- A failed mesh refresh keeps the last good sample and the distance it was
taken from, and is retried after the miss cooldown, instead of recording
the failed distance and never refreshing again.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- A floating portable panel saved its measured box, so dragging a
collapsed window stored its 50 px header strip and a reload clamped it
to the minimum. It now saves the inline size the user chose. A unit
test and a collapse -> drag -> reload -> expand step in the panel gate
pin it.
- Coverage awaits the tile fetch and the one-time terrain table load
together, so a tile that fails before the table loads is reported at
once instead of surfacing as an unhandled rejection.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Photo framing and FOLLOW claim the camera through the application's
navigation, injected with attachNavigation({ run, subscribeHandoff }):
aircraft and satellite tracking is released first, the cockpit refuses,
and FOLLOW stops when another feature takes the camera. No UI imports
in the layer.
- The mesh sampler follows the mesh floor's rules: it waits for the
visible tileset to finish streaming (visibleTilesetLoaded, now exposed
by the mesh floor service), needs a real bare-earth prior and keeps to
the shared meshFloorSampleWithinPrior window, which cameraFollow now
uses too. A cell is probed again once the camera is half as far from
it (down to 40 m), so a coarse early sample is replaced and redrawn.
- The MCP globe panel's CSP allows the Mapillary Graph API and its image
CDN (https://*.xx.fbcdn.net).
- The tile proxy reads bodies with the shared readResponseBytesCapped.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Trim the doc text this PR adds (README, CHANGELOG, CURRENT-STATE,
KNOWN-ISSUES, SECURITY, DATA_SOURCES, .env.example, the CI job comment),
drop code comments that restate the code, cut design-note JSDoc to a line
or two, and drop review tags from test names. Comments only; no code
changes.
Also: README key count (seven keys, two metered), CURRENT-STATE's gate
paragraph (CI runs a production build with a dummy token), the stacked
doc above meshBoxInRange and the orphaned inMeshRange line in
coverage.js, and a duplicate ALPR row in DATA_SOURCES that a merge had
brought back.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The fleet draws a grounded contact at its delayed position lifted onto the floor under it, but a new billboard was created at the delayed position without that lift. A taxiing aircraft whose reported fix sat lower than the ground under its delayed position started on the fix's floor and then rose on the next fleet tick. Creation now applies the same floor the fleet pass does.
The client lease id came from crypto.randomUUID, which browsers only
expose in secure contexts. Opened over http://<lan-ip>:4173 (the
HOST=0.0.0.0 opt-in), starting a live camera feed threw before playback.
Fall back to a v4 UUID from crypto.getRandomValues, which the server's
lease check accepts.
The military fleet also renders behind real time and projects a fresh contact's first fix back to that delayed time, but its billboard was created at the raw fix. A new contact therefore appeared ahead of where the next fleet tick put it and jumped back. The snapshot renderer now receives the layer's motion and creates the billboard at the dead-reckoned delayed position.
The fleet renders behind real time, so a newly seen aircraft is displayed at its fix projected back to that delayed time. Its billboard was created at the raw fix instead, so it appeared ahead of where the next fleet tick put it and then jumped back about one render delay of travel before moving forward.
From gekh's review of db79027, each with a test that fails before:
- P2: image cones and the photo marker no longer disappear where the
ground lies below the WGS84 ellipsoid (NYC -22 m, Colombo -95 m). The
horizon cull's occluder is WGS84 shrunk by 1 km (HORIZON_CULL_DEPTH_M),
below any real surface, so a camera near or under the ellipsoid no
longer treats every lower point as behind the horizon; the far side of
the Earth is still hidden from orbit (tested).
- Mesh range across the date line: the camera's longitude is taken to the
box's side of +-180 before clamping (meshBoxInRange), so a tile just
across the line is not measured from its far edge.
- MapillaryJS no longer tracks window resizes (trackResize: false): the
panel's ResizeObserver resizes the viewer and skips it while hidden, so
a window resize after closing a photo cannot ask for a tile at z=NaN.
- A key-less install sends no tile requests before the key status is
known: coverage waits for the first status answer and the provider
refreshes it once the status lands.
- constructCatalog takes the source method list from MAPILLARY_SOURCE_
METHODS; sequences.js imports view.js once; the provider's unused
re-exports are gone.
Verified: unit 5970 pass; strict fixture gate on a production build 28 ok
+ 2 "no Google 3D" skips and the panel gate 6/6 (QA_FAIL_ON_RETRY=1);
live gate with a real token 25 ok + 3 fixture-only skips.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A mutation review left 18 earlier survivors; each now has a test that
fails with the mutant applied:
- the expanded viewer returns into the panel on shrink, close and destroy
(the fake DOM had no parentNode, so reinsertion was never exercised); the
fake DOM gains offsetParent and a MutationObserver that honours its
options, and a <body> child added while expanded goes inert;
- each pose moves the marker, drives FOLLOW and selects a new sequence;
close() retires an open still mounting or opening; a provider toggled
while the layer is off activates nothing; the adapter drops late and
superseded poses;
- share-link defaults: "any date" (0 days), the codec max pinned to the
filter's MAX_SINCE_DAYS (layerState cannot import it across package
boundaries, so a test ties the two), Mapillary on when a link omits it;
- Esc that something else handled, or typed in a field, keeps the
selection; a key problem outranks LOADING on the pill;
- the marker's terrain height (mesh, DEM, clamp then re-place);
- proxy: LRU memory cache and its half-budget rule, Retry-After capped,
a request after a cancelled fetch starts a fresh one;
- date-line tile ranking with and without focus; the horizon cull idles
while the camera stands still; the old zoom goes as soon as the new one
lands; a rate limit holds every refresh inside its wait.
One real bug found and fixed: Esc inside a contenteditable cleared the
selected sequence (selection.js now ignores isContentEditable targets).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
From the IC8 review of #768, each with tests that fail before:
- P1: a mesh batch no longer rebuilds the selected sequence's cones. The
drawn cones are indexed by mesh cell; a batch that touches none of them
is ignored and the affected cones are moved in place (no removeAll/add).
- P2: mesh sampling keeps to its 6 ms slices. Requests are taken in inside
the budget, only cells within range of the camera are queued, the queue
is a persistent min-heap re-ranked in one pass only after a 100 m camera
move, and the deadline starts before any work. Coverage keeps a bounding
box per line and densifies a line only once it comes within range. On a
synthetic dense tile (600 x 40 points): slice median ~10 ms -> 5 ms, max
18-30 ms -> 6.7 ms, refresh cost 11-24 ms -> 1.5-3 ms.
- P2: image cones and the photo marker are horizon-culled like the
overview dots (one createHorizonCull in view.js, shared by all three).
- P2: a selection change recolours the previous zoom's lines still on
screen and the old lines a cast swap keeps showing.
- P2: distances (metresBetween), line densification and ground-corner
requests go the short way round +-180 deg (wrapLon in tileMath.js), so
nearest ordering, cone thinning, mesh range and cast lines are right
across the date line.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
From the IC8 review of #768, each with tests that fail before:
- P1: closing a photo, switching the layer off or destroying it stops the
1.6 s framing flight toward that photo. The flight is claimed with a
token before flyToBoundingSphere and released by its complete/cancel
callbacks, so cancelFraming() calls camera.cancelFlight() only while
the flight is still Street Level's: a newer navigation flight (a search
result, a scene) is never cancelled. Turning FOLLOW on also stops it, so
the tween cannot overwrite the follow view.
- P2: an older nearest-photo lookup can no longer replace a newer choice.
The core owns one AbortController per lookup, aborted by a newer lookup,
a direct open or cone click, closing the viewer, disable and destroy;
the signal reaches source.nearestImages through the provider, and an
aborted lookup never surfaces as an error.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A duplicate scan of every module the PR adds (repeated 4-line blocks,
normalised) after gekh's dedup round left these:
- glyphs.js: the cone, ring and position glyphs share cachedGlyph(), wedge(),
ring() and dot(). Checked with a recording canvas: all 20 draw calls keep
the same path and fill/stroke state, so the glyphs are pixel-identical.
- panelPositionControls.js: one placeAt() for the three places that pin a
panel's top-left corner as a fixed window.
- tiles.js: one warn() for the three background-failure logs.
- Tests: src/testSupport/streetLevelFakes.mjs holds the provider snapshot
(uiState + presentation tests), the stand-in provider (core + controls
tests) and one real-ray pinhole camera (view + coverage tests, which had
each written their own). The coverage line-of-sight test still fails when
refresh() stops passing its focus.
- qa-street-level.mjs: one waitForCoverage() for the five copies of the
"on, drawn, settled, not key-gated" wait.
No behaviour change: unit 5862 pass, fixture gate 16/16, panel gate 5/5.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Cover every Norwegian station-based city-bike system with an open GBFS
feed: Kolumbus Bysykkel (Stavanger) and Farte Bysykkel (Skien/Porsgrunn)
through Entur Mobility, and Bysykkel Lillestrøm through JCDecaux
Cyclocity.
api.entur.io and api.cyclocity.fr join the GBFS allowlist, each kept to
its GBFS path prefix since both hosts front other APIs. Entur serves its
feeds without a .json suffix, so the endpoint checks accept either form,
and requests to Entur carry the ET-Client-Name header it requires.
Attributed under NLOD (Entur) and Licence Ouverte (JCDecaux).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Add Norway's three Urban Sharing city-bike systems to the Bike Share
layer and get_bike_share. The feeds are keyless GBFS on
gbfs.urbansharing.com, which joins the proxy allowlist. The proxy now
sends the Client-Identifier header the operators ask clients to send.
Attributed under NLOD 2.0 in DATA_SOURCES.md and the data credits.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
