With readings kept per point, the floor a vehicle gets depends on which point
is probed and where it is read. Transit offered the sampler the first point of
each vehicle's path in a cell, usually its oldest fix there, so a vehicle that
stayed in one cell never had its current spot probed. It now offers the latest
point of the path in each cell, and the newest fix in the vehicle's own cell
(the selected vehicle's history is walked newest first).
The grounded-flight display clamp read the floor at its sticky cell's centre,
which now answers from the reading nearest the centre, not the contact. It
reads at the contact's own position, held inside the sticky cell so boundary
hysteresis still applies.
On the photoreal stack the rendered-mesh floor took one probe at each coarse
cell's centre (0.001 degrees) and kept it for the session. A centre on a roof
passed the +80 m DEM window and lifted every vehicle in the cell to roof height
(a Haymarket bus drew 23.5 m above the street, on the garage roof); a centre in
the river put Red Line trains on the Longfellow Bridge 6-9 m under the deck.
The sampler now probes at the caller's point. A cell with a reading is probed
again only at spots about 17 m apart from earlier ones, eight at most, and a
spot refused only because the cell's DEM prior was cold is tried again later.
The floor keeps each reading that passes the gate at the point it was taken
(two within about 5 m keep the lower; sixteen at most per cell) and answers a
read from the reading nearest the asked point, so a viaduct and the street
beside it in one cell keep their own heights.
Each sprite layer's icon or dot set is now made at a draw order taken
from SPRITE_LAYER_ORDER through the renderer's per-set drawOrder:
flights over military, vessels, directions, transit, bikeshare, FIRMS
and CCTV, whichever layer was turned on first. Picks name the topmost
first. The orders are negative, so selection highlights, route
endpoints, the tracked plane and every other set at the default order
still draw over all sprite layers, as they did before.
The raise-to-top restorer, the sprite registry and the primitive-name
lookups are gone, which takes spriteOrder.js off the viewer-access list.
Before, the restorer raised the layers to the bottom of the scene in the
order they were enabled, so flights usually ended up under the others.
The application scene is the composition root: it now takes everything it
needs from one adapter module (src/render/cesium/application.js), which
loads, shows and releases the photoreal tileset and hands out the viewer
hooks. The conformance page keeps importing the adapter's harness and scene
renderer, since running the suite on Cesium is its purpose. Both are named
in the ratchet as the only files outside the adapter that may import it,
each limited to those modules, by name only, and the modules may not hand
out the Cesium namespace. Only geoImportPins stays on the allow-list.
The embed views fly through rendererOf's camera port with geo maths, and
the panel render loop that keeps an inline panel drawing moves into the
Cesium adapter (src/render/cesium/panelRendering.js); the application
scene hands it to the embed views as `keepRendering`. The shell reaches
the camera, effects and globe through rendererOf and loads no Cesium
factories; whether Cockpit's aircraft is an entity of the viewer's own
comes from the scene's `viewerDrawsEntity`, wired in through the
controls. Callers handing the shell or the application tools a viewer
of their own load ./render/cesium/unbound once, as the ports' unbound
check now records.
Before merging: singular 'one' forms from the review table (44 entries),
counters keep their order across the slash (מתוך, as Arabic المن), the
lightning layer says ברקים (the legend now counts ברק strikes, the help
text keeps 110°E Latin), configured-elsewhere keys are promised
untouched, Punk is פאנק רוק, dock/panel side labels follow the mirrored
layout, and the HUD-summary English guard covers he (NON_LATIN_LOCALES,
tested) — documented in Adding a language along with format-scope.
Suggestions and nits: restricted is מוגבל, stage recovery is החבה not
שחזור, voice-inactivity names the behavior, lane directions use
attributes (השמאלי) and around is לאחור, Ironbow and KM/S stay Latin in
same-as-english, {age} no longer doubles לפני, typos and garbled words
fixed (תנאים, ידנית, ודאות, מקלט, זמניים, ערוץ 14, מעונן חלקית, אין אות
קריאה, Tab לתצוגה מקדימה, השאר ריק, היוועץ), counted units shortened
(שנ' דק' שע' ימ'), terminology unified (briefing תדריך, forecast תחזית,
course מהלך, אונייה, שריפה), rtl.css shares the mono redirect under
:is(:lang(ar), :lang(he)) and its comments match the rules,
worldOverlayTokens adds Noto Sans Hebrew to the canvas card fonts, he.md
gets the fraction-aware plural table, iw/iw-IL map to he (tested).
- Translate the 12 new strings: site standby and Live-Signal pings,
releasing and keeping the camera on a subject, riding a satellite,
the focus and return chips, unnamed mapped sites.
- OFF-NADIR stays as printed via same-as-english.
- Rebase on origin/main and translate the 130 new strings: event-age
filter, satellite class groups (STATIONS/IMAGING/TELECOM/STARLINK/
PROBES/DEBRIS) with CelesTrak SATCAT context, TomTom traffic limits,
the ship bridge view (look/hold/radar/SOG/COG), the orbital view
(swath, off-nadir, TLE, sub-satellite point, nadir/track-up) and the
world-time play speeds.
- Instrument readouts keep the Latin codes (LOOK/STBD/PORT, NM, NORAD,
EPOCH, TLE, OFF-NADIR, STARLINK, EYE, SWATH variants) via
same-as-english.
- Prune 3 entries whose English main replaced.
- Add the full catalog (2940 entries keyed by the English text; 75 plural
entries carry one/two/other per Intl.PluralRules('he')), reviewed for
meaning, terms, separators and label length.
- Register he: he-IL and he map to it; it joins RTL_LOCALES so <html
dir=rtl> mirrors the chrome through logical properties and rtl.css.
- rtl.css: Noto Sans Hebrew (loaded with the other Google fonts) leads the
mono and sans stacks, tracking released like Arabic, HUDs keep JetBrains
Mono for Latin telemetry.
- same-as-english: instrument codes and HUD readouts stay as printed
(HDG/BRG/CRS/FOV/CRT/NVG/FLIR/CAL/SRC, MW units, Sentinel-2, km/h...).
- docs/translations/he.md: style, plurals and glossary.
- docs: TRANSLATORS.md and CURRENT-STATE.md updated; normalizeLocale test
covers he-IL.
src/sky/starrySky.js and src/app/viewer.js are Cesium through and
through, so they move into the adapter as src/render/cesium/starrySky.js
and applicationViewer.js; the ./application/viewer export points there.
The celestial ring's precise ICRF rotation reaches the shell through a
Cesium-free registry (src/sky/icrf.js) that the sky provides as it
loads; the application's renderer loads it, and so does
./render/cesium/unbound. Both files leave the Cesium allow-list.
The map stacks' imagery, terrain and Google 3D factories move into the
Cesium adapter (src/render/cesium/mapImagery.js, mapTerrain.js,
google3d.js); the ./maps/imagery, ./maps/terrain and ./maps/3d exports
point there. The catalog names its ion stacks by asset number, and the
map source controller and default sources are Cesium-free: they
build providers and switch imagery layers, terrain, tilesets and the
globe's visibility through a map engine (src/maps/engine.js) that the
Cesium adapter provides as it loads (mapEngine.js), through the
application's renderer or the ./render/cesium/unbound export. The
controller and createDefaultMapSources also take it as an `engine`
option.
src/maps/catalog.js, controller.js, imagery.js, terrain.js and google3d.js
leave the allow-list.
The world annotation renderer no longer draws entities, so the checks
read the mark's primitives in the scene instead: draped fills and
outlines, built, and unchanged while the camera is still. The last
outlines are checked by picking the mark at the middle of the view.
How long the primitives take to build is reported beside the first
drawn frame.
Areas, buildings, routes, arrows, pins and labels are draw-port shapes,
lines and points, one set per mark, faded by upserting their colours.
Pins pulse their ring and size it by camera height; arrows drape.
Ground heights come from the heights service. The module leaves the
Cesium allow-list.
Unclamped colour fills are built with position and normal only, as the
entities' colour batches build them; image fills keep texture coordinates.
With the default format Cesium packed texture coordinates with the normals
and the colour appearance decoded the packed value as the normal, so lit
colour fills (an extruded column, a box) shaded darker than the same
entity.
- EXP. {slot} and EXPORT so the Recent Imagery export buttons fit and A
and B read apart; EXPORT listed as same-as-English.
- {count} HÖRT / hört for one aircraft; the plural rule in sv.md no
longer lists HÖRDA.
- INTE FARA ÖVER throughout; VÄ/HÖ for left/right (V is west on the
compass); STYRD KURS vs KURS Ö. GRUND; MIK in the first-run tip.
- Label-first counts for sightings and standby cameras; neuter audio
states; OSÄKER on chip and status line; KN for knots; the ellipsis
character; Ladda ned and VÄNTLÄGE throughout; Olagligt ingripande;
FÖRHANDSVY for the preview flag and authoring heading.
- sv.json in the format scope; Swedish in language-code order in
TRANSLATORS.md; glossary row reduced to incident → händelse; 29
letterless entries dropped from same-as-english.json.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Shapes take an alpha pulse (from, to, periodMs, forever), run before each
frame, with frames asked for while anything drawn pulses. Any other pulse,
or one on a fill that is not a colour, is refused before anything changes.
An upsert that changes only colours, pulse, show or meta is written into
the drawn primitives: unclamped shapes through their instance colours and
ring materials, clamped colour fills through their ground primitive (or
once it is ready). Shapes not yet drawn, or drawn opaque and turning
translucent, rebuild as before.
Draped lines take the arrow style. Clamped ellipses with radii by camera
height are drawn at the camera's height each frame, drawn alone up to
MOVING_SHAPES (counting those a retiring host still draws alone) and
rebuilt past that. Extruded shapes that classify their volume draw as a
ClassificationPrimitive where the scene supports it, and extruded
polygons draw their outline cage. The stub picks clamped rectangles,
ellipses and classifying volumes, outside their holes. Conformance
checks radii by camera height and classifying volumes on both renderers.
The wind relief now asks the globe port for hillshade surface shading at
0.28 instead of building a globe material itself; the Cesium globe port
draws the same view-directed shading, over terrain normals or the globe's
curvature, and the unbound provider now lists surfaceShading. The wind
layer's canvas flow, bounds, imagery fade and render requests go through
the camera, frame and query ports, so src/layers/wind/rendering.js and
relief.js leave the Cesium allow list.
A refused shading request is taken back so it never shows after Wind is
off, and a camera height that is not a number falls back as before.
The application layers and standalone catalog entries no longer load the
unbound factories themselves: a viewer with no renderer bound
needs render/cesium/unbound loaded first. The contract and current-state
docs say what the Cesium adapter's fields and surface shading do now.
The Cesium draw port now implements draw.field for the windStreamlines
kind (src/render/cesium/drawStreamlines.js). It carries the flow shader,
the 30-degree cells, horizon and frustum culling and the path tracing over
from the wind layer. It moves the highlight on the page's own frames, at
most every 32 ms, and only while the field shows, is unpaused, has alpha
and some cell is in view on a visible page. A grid no path runs through,
or one short of the whole globe, is refused. A rebuild that fails draws
nothing and is never told drawn.
The wind layer's GPU flow (src/layers/wind/gpuRendering.js) now builds the
spec, fades it by camera height and pauses it through the draw, camera and
frame ports, and no longer reaches Cesium, so it leaves the Cesium allow
list. The layer runs no animation loop of its own while the renderer draws
the flow; the canvas fallback is unchanged and still takes over wherever
the field is refused. A new conformance check covers the field's 'drawn'
events.
createApplicationTools returns drawShape({ shape, signal }): it opens Draw
for one area or line and resolves with its Polygon or LineString without
placing a mark, or null when draw mode is left, the signal aborts, a newer
request replaces it, the pointer is held elsewhere or the tool goes. The
shape controls cannot change the asked-for shape, and a shape across the
antimeridian is refused as a row's actions refuse it and drawn again. It
also returns pointerFree, so an application's own click handlers yield to a
tool holding the pointer, as the layers' do.