Image loading (photoViewer.js)
- One AbortController per open: a new open, close or unmount stops the
previous photo's first and sharper downloads (an <img> by src = '').
A collapsed viewer never falls back to the original; Panoramax's flat
fallback is the thumbnail. A superseded open resolves quietly.
- Flat HD tracked as "loading" and "shown" apart: a discarded response no
longer blocks later upgrades, and resizes while it loads ask once.
- No upgrade of the photo still shown while another opens.
- Size limits before decoding: imageSize.js reads JPEG/PNG/WebP/GIF
headers; more than 64 MP or 16,384 px a side is refused undecoded, an
<img> that decodes larger is refused and let go, flat HD needs a known
width of at most 8,192 px, and panoramas always decode with a resize.
Panoramax provider
- Retry-After parsed as seconds or an HTTP date; the browser cannot read
it here, so busy answers back off 5 s doubling to 300 s, reset once
answered.
- Headers timed, then the body by an idle timeout (15 s of silence), so a
slow link still gets its megabyte tiles.
- Cones centre only on the picture shown (onShowing), never on a late
lookup; lookups nobody waits for are aborted (shared, refcounted).
- onReopen: a GPU reset redraws in the viewer, not through the core.
- Cones draw the home z15 tile at once and add neighbours as they arrive;
a neighbour that failed is not counted as drawn.
- Coverage tiles decode in ~8 ms slices (a 2 MB z10 tile over Paris was
one ~85-200 ms task); sorted by measured length without a Map.
- Box search asks for 20, not 100 (the API returns them nearest first).
- looksLikeEmail checks every '@'; creatorOf de-duplicates with a Set.
lineCoverage.js
- A redraw while a swap still builds keeps what is on screen (the swap's
old lines and its ready new ones) and drops only the unready ones.
Tests for each (mutation-checked), two vacuous tests made real, the
cones' pictures lane and readable()'s busy/timeout paths covered; the
fixture's box search is nearest first. Docs: README filters and share
links, CHANGELOG HD wording, CURRENT-STATE.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
CHANGELOG: keep both new [Unreleased] entries (Panoramax, and the
emergency-transponder highlight from #856).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Normalize GeoJSON ground footprints, preserve explicit KML track heights,
and tessellate ground paths before native loading. Validate coordinates,
geometry types and decoded image budgets before allocating native resources;
strip loader-sensitive metadata and settle deferred failures and cancellation.
Render static pins in owned billboard collections instead of walking tens
of thousands of point entities each frame. Refine nearby ground heights in
batches, isolate imported pins from height picks, and release owned resources
and point selections on removal. Use safe ray origins above a hidden coarse
globe and retain valid mesh heights outside the current footprint.
Frame complete geometry with viewport-aware nadir arrivals, including walls
and rotated overlays; respect camera gestures and accept document file drops.
Strengthen real-loader, native 3D Tiles, paint, clock and lifecycle coverage.
Addresses both P1 and all 25 P2 findings in the follow-up review of #1122.
Seven QA scripts hard-coded macOS Google Chrome. They now share chromeExecutablePath(): PUPPETEER_EXECUTABLE_PATH when set, then macOS Chrome when installed, otherwise Puppeteer's managed browser. The cables screenshot path is built with fileURLToPath so it works on Windows. qa-overlay-baseline keeps its fixed Chrome because its baselines record the executable.
Co-authored-by: Sameh Khamis <[email protected]>
KartaView's later viewer changes are carried into the shared
photoViewer.js: the camera bearing (`bearingOf`), redrawing the same
photo after a GPU reset through `onReopen`, no pose while a lost context
recovers, the 2,560 px flat version only once the viewer outgrows
1,280 px, `refreshPose`, and one sharper-panorama load at a time with a
second look once it lands. Its tile cache's `keyOf` and `clear` move to
the shared tileCache.js. KartaView gets `onEscape` beside `onReopen`.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Esc moved to the viewer's box (`.sl-viewer-wrap`) in the last commit, but
without one it was a second keydown listener on the root; Esc is now taken
by the root's own handler there. format-scope.json listed
panorama.test.mjs twice, which made the formatter refuse the scope; the
files it skipped are formatted.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
From a five-lens IC8 review (correctness, security, tests with mutation
testing, performance, UX):
- P0: over Paris at 12–60 km the unsimplified z10–z12 lines sent ~2M
points to Cesium's ground-polyline builder (gigabytes of geometry; the
tab hung). decode.js now simplifies lines (Douglas–Peucker, 4 tile
units: 6–10% of the points), and lineCoverage gains an opt-in point
budget (`maxPoints`, 10,000 a tile for Panoramax).
- Decoded coverage tiles are kept (KartaView's tile cache moves to the
shared tileCache.js); a sequence's z15 picture lists are kept and load
on their own connection; cones know their tiles from the start of a
load, so a picture opening meanwhile re-centres them and ‹ › no longer
restarts the load.
- The HD panorama loads only for the expanded viewer (a docked one on a
dense screen asked for 3 MB originals) and is aborted when another
photo opens; picture files over 48 MB or 16,384 px are refused; a
bitmap no renderer took after a context loss is closed.
- A nearest lookup survives one of its two searches failing; only a
timeout is retried; offline reads as unreachable; Retry-After is
capped at five minutes; the search box stays on the map at ±180°;
cones near both edges of a narrow (high-latitude) tile read both.
- Every producer is credited (app and photographer); with none to name,
the caption says "via <instance>" rather than crediting the host.
- Esc anywhere in the docked viewer (toolbar, caption) clears the
sequence before the panel takes it. A filter that hides every density
dot says so; wording aligned ("coverage", "photo").
- Tests for every surviving mutant (Esc consumed, keepOrder and dot-size
wiring, licence in the core, limiter aborts, radius floor, bbox corner,
first-producer-only, byte and size caps), a limiter test, and a gate
fixture that answers box searches and leaves out pictures facing away;
the gate now clicks over the other sequence's pictures, so only the
line click's own-sequence lookup can pass.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Panoramax, the open federated street-level commons, registers beside
Mapillary, Google Street View and KartaView. Its meta-catalogue
(api.panoramax.xyz) is keyless and CORS-open, so it runs in the browser:
- coverage from its vector tiles: sequence lines at z11–14 below 30 km
(longest first under the per-tile cap), and above that the grid layer's
density cells as binned points, not counted as sequences;
- a click on a line opens that sequence's picture nearest the click
(STAC search, any direction), without moving the camera, then any
sequence's if it has none within 50 m; the 360° and since filters go to
the lines and to the API;
- cones from the z15 tiles' pictures layer around the open picture
(~110 bytes a picture, against ~7.5 kB for a STAC item), re-centred when
a picture opens outside them; ‹ › follow the picture's prev/next links;
- the caption names the author (not an account named by an email
address) and the picture's licence (StreetPose `license`), and links to
the picture in the Panoramax viewer; the globe credits Panoramax.
KartaView's viewer becomes the shared photoViewer.js (flat <img>, 360° on
panorama.js, ‹ ›, keyboard, pinch, context loss), driven by a per-provider
PhotoSources table; the request limiter moves to limiter.js. Panoramax shows
the 2,048 px SD derivative and fetches the HD original only when the viewer
is wide enough, once, shrunk while it decodes (never above 8,192 px).
Orange #ff6f00 (Panoramax's own), off by default, share option
0.m.0_0.r.panoramax-1. The MCP panel allows the meta-catalogue and the
biggest instances. Tests: policy, decode, source, viewer, provider, and a
Panoramax fixture in the hermetic browser gate.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A mutation review (91, then 130 mutants) found tests that could not fail
(quick presses with synchronous fakes, a no-flight check with a provider
that never posed), and untested paths. New and rewritten tests kill 123 of
130 mutants; the 7 survivors are equivalent or harmless redraws.
- viewer: held-back loads for quick presses, stale sharp/flat loads,
close mid-load, ends checks for an older photo, WebGL retried per mount,
focus handed back, look direction kept on ›.
- provider: id-ordered pages with out-of-order indexes, page and probe
failures retried, overtaken lookups, cones re-centred on ‹ ›, leftover
imagery filters hide no line or cone, coverage hints, tile cache.
- source: 429 backoff and Retry-After under mock timers, hang timeouts,
the nearest query's parameters. policy: storage-host injection, FOV 360,
longitudes past ±180. panorama: a stub WebGL context (angles, lost
context, re-measuring). lineCoverage.test.mjs: tooHigh hint, passes().
- core: openImage({frame:false}) and openNearest leave the camera
(with a posing provider and a default-open control), KartaView's legend
and wording end to end; viewerHost supportsRenderModes.
- Fixed tick-count waits replaced by an until() poll.
- Browser gate fixture: odd photos archived (409 at storage2, served by
the proxy), the first lookup rate-limited (429, Retry-After: 0); the
line-click step asserts the camera stays and › skips the archived photo.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The fixture gate answers api.kartaview.org, cdn.kartaview.org and
*.openstreetcam.org from fixtures (a drive with a 360° photo, stored on
storage2 while the API names storage1) and adds three steps: keyless
coverage with its credit and hidden filters, a line click opening the
nearest photo with cones and ›, and a 360° photo on the panorama without
FIT / FILL. The Street View share-link check reads the switch field instead
of one exact entry, since a chip click records every provider's switch.
README, DATA_SOURCES, CHANGELOG and CURRENT-STATE describe KartaView.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Coverage lines from KartaView's z13-14 JSON tiles (OSM ways with photos,
chained end to start), the photo nearest a clicked line, cones along its
sequence, and a viewer for flat photos and 360° panoramas (a small WebGL
equirectangular renderer, no new dependency) with ‹ › along the sequence.
Mapillary's camera-driven line coverage and sequence cones move to the
provider-neutral core (lineCoverage.js, sequenceCones.js) with the tile
fetch, zoom ladder, colours and pick prefixes injected; Mapillary keeps
thin wrappers and its tests pass unchanged.
KartaView quirks handled: api.kartaview.org (the documented
api.openstreetcam.org serves empty tiles), photo URLs that name storage1
for photos stored elsewhere, and a photo API that answers 429 to more than
about three requests at once (two in flight, retried with backoff).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Review on #856 (kvnloo): the analyst projection flattened a 7700 squawk and
the readsb ADS-B emergency field into the same emergency/emergencyKind pair.
- mapAnalystRecord (flights, military) adds emergencySource ('squawk' |
'ads-b' | null, from aircraftEmergency().source), emergencyBroadcast (new
pure emergencyBroadcastPhrase: "broadcasting squawk 7700 (general
emergency)" vs "ADS-B reports general emergency") and observedAtMs (the
record's lastContactEpochMs: last transponder message, epoch ms).
- emergencySource is a queryable analyst text field; the voice payload passes
it and emergencyBroadcast through, and observedAtMs only for aircraft with
a status. Tool description asks the model to narrate with the phrase.
- Source-to-analyst fixture test: OpenSky 7700 vs adsb.lol emergency=general
on squawk 1200 differ in provenance and timestamp; filterable by source.
- Voice tool-payload pins re-derived for the additive description change.
Co-Authored-By: Claude Opus 5.5 (1M context) <[email protected]>
- aircraftEmergency: `source` is 'squawk' only when the Mode A code itself
names the status; the Cockpit HUD no longer quotes an unrelated squawk
(e.g. SQUAWK 1200 on an ADS-B `downed` status).
- military: new billboards and the untrack restore use the fleet tint, so an
emergency stays red instead of snapping back to amber; tint helpers take the
record already in hand instead of a second lookup.
- cockpit/cyber CSS: emergency colour via a custom property / theme token,
meta line bolded so the status does not rely on colour alone in the HUD.
- tests: revert Prettier churn in unscoped test files; only semantic edits.
- docs/CURRENT-STATE.md: transponder emergency highlighting section.
- qa-emergency-squawk: (iv) RELEASE check; new files added to format scope.
Co-Authored-By: Claude <[email protected]>
- Route the adsb.lol GNSS source through createReferenceSources and the
constructCatalog contract; app layer module is a thin pass-through.
- Describe the method honestly: gpsjam.org's published cell formula and
bands; per-aircraft thresholds are the 14 CFR 91.227(c) ADS-B Out minima
(NIC < 7, NACp < 8) plus readsb gpsOkBefore.
- Proxy: reuse the adsb.lol anchor parser, honour upstream Retry-After
(clamped 5-120 s), serve stale during cooldown, cap the body size.
- Layer: redraw only when a cell id or band changes, treat a settling
camera as a retry rather than a rejected enable, keep low cells visible,
skip rows without finite coordinates, state the 3-aircraft rule in the
legend blurb.
- Voice: gnss-interference in set_layer_visibility / show_data_layers_menu
plus common aliases; voice pins re-derived.
- qa-gnss: stub the route in-page (request interception stalls Cesium's
geometry workers), assert every cell is built, cover all bands over land
and sea, screenshot every state with the Data Layers row open.
Hex project - Crew Leo Agile dev team.
Co-Authored-By: Claude <[email protected]>
Bins airborne ADS-B v1/v2 aircraft that report degraded navigation
integrity (NIC < 7, NACp < 8, or readsb's GPS-loss flag) into 0.5 degree
cells over a rolling 30-minute window, coloured with the gpsjam.org
bands. Keyless: reads the capped adsb.lol point snapshot around the view
through /api/gnss-integrity, which returns integrity fields only, caches
60 s per whole-degree anchor, backs off on upstream 429 and serves the
last snapshot on failure. Adds scripts/qa-gnss.mjs.
Built by the Hex project (Crew Leo Agile dev team).
Co-Authored-By: Claude <[email protected]>
Register the keyless webcams.nyctmc.org catalog as a live CCTV source,
synthesize frame URLs from validated camera UUIDs, and keep the nearest
cameras to the five borough cores under the existing catalog ceiling.
Conflicts with upstream's Street Level provider composition and share-state
codec, resolved:
- Street View's switch moves from its own share option (`g`) to upstream's
provider-switch field (`r`, e.g. `0.r.google-1`); a link without it keeps
Street View off. Docs and the browser gate follow.
- createApplicationStreetLevel keeps upstream's injectable provider list;
its default, once the application supplies its Street Level source, is
Mapillary plus Google Street View. Without that source there are none, as
upstream intends.
- The coverage hint keeps upstream's empty-composition message and joins
every switched-on provider's hint otherwise.
- CHANGELOG, README and SECURITY keep both sides' entries.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Google's Maps Platform terms forbid Street View imagery beside non-Google
maps, so the provider declares requiresMapStack: 'photoreal': off Google
3D its chip is dashed with the reason, lookups and opens skip it, and
leaving Google 3D closes its panorama.
- Ground clicks: only a click on the map itself (scenePick.isSurfacePick:
nothing picked or Google 3D tile content) at street zoom opens Street
View, and the camera stays put; higher up the hint says to zoom in.
scenePick.pickGroundPosition replaces the copy in Directions.
- Viewer: poses go out at once and again when the date and address
arrive, so an open never hangs on that lookup; one lookup per panorama,
seeded by the nearest lookup; a close settles a pending open; failed
lookups are asked again; poses follow position changes, not pano_changed.
- Loader: the gm_authFailure handler is installed once, so a retried load
reports a refusal once.
- Viewer host: a prewarm that lands after another provider took the host
is released; FIT/FILL availability is set on every open.
- Provider: a refusal while switched off reports no error over another
photo; SINCE compares against the end of Google's month; messages name
the referrer and network causes; FLAT says Street View is 360° only.
- The layer row names the key of the providers that are on; the MCP panel
CSP admits Street View's tiles, control images and photos.
- Tests for each, against fakes that now follow Google's event order; the
browser gate restores its state, waits instead of sleeping, aims its
panel clicks and corner drags, and asserts the camera stays put.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Google Street View registers beside Mapillary as provider `google`. It runs
on the Maps JavaScript API with the browser GOOGLE_MAPS_API_KEY, loaded on
first use (mapsLoader.js), and uses Google's own StreetViewPanorama as its
viewer adapter, emitting provider-neutral poses (address and month in the
caption, a link to Google Maps, steps along Google's arrows, FOLLOW on
Google 3D). Its chip starts off because every panorama is billed to the
key; the share option is `g`.
Google offers no coverage layer for other maps, so the provider draws
none: with it on, a click on bare ground at street zoom opens its nearest
Google-collected outdoor panorama (groundClick.js). A key Google refuses
reads KEY REJECTED and fails a pending open at once; a lookup Google never
answers fails after 10 s.
Core: providers may declare `groundClick` and `defaultOn`; poses may carry
`capturedAtPrecision` and `title`; the coverage line keeps every
provider's hint; opening one provider's image releases another's
prewarmed viewer; FIT/FILL hides for viewers without render modes. CSP
script-src admits https://maps.googleapis.com. The browser gate gains two
Street View steps (the keyed one skips as 'no Google key' in CI).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
viewer.flyTo frames ground-clamped billboards before the destination's
terrain has loaded, and their bounding sphere then sits kilometers below
the surface: flying to a points-only GeoJSON from another city left the
camera about 2.3 km underground (a black screen). Frame the features'
longitudes and latitudes at the surface instead, and let the existing
camera ground guard lift the eye once the terrain can be measured
(src/ui/flyToDataSource.js, with tests).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
DISPLAY ▸ Import (and drop onto the globe) puts the person's own files on
the map as Cesium data sources, clamped to the ground, one color per file,
with a row to show/hide, fly to or remove each. Files stay in the browser
for the session.
KML/KMZ are sanitized before Cesium reads them (network links, remote
icons/styles, models, photo/screen overlays and balloon HTML removed; KMZ
images served from blob URLs), so an imported file cannot make the page
fetch anything. KMZ is read with a small dependency-free zip reader on the
platform DecompressionStream, with a zip-bomb limit. Bounded file size,
entity count and number of files.
Tests: src/data/geoFileImport.test.mjs, src/ui/geoFileImport.test.mjs.
Gate: scripts/qa-geo-import.mjs. The import half of #890.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Fixesbilawalsidhu/gods-eye-view#927. Each stdio MCP server made its own
random panel key, and panel_request accepts only the key in the panel
page. A client that starts two server processes for one connection and
reads the page from one while sending the page's requests to the other
(seen in Claude Desktop on Windows) therefore always got "Only the God's
Eye View panel may make this request".
The stdio entry now passes a key shared by the install, created once in
.gev-cache/mcp-panel-key. The file is staged 0600 and published with
link(), so processes starting together agree on one key and never read a
half-written one. If it cannot be stored, the process keeps a key of its
own, as before. createLocalMcpServer still makes a fresh key unless given
one, so in-process servers (the /mcp HTTP plugin, tests) are unchanged.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- The CI gate builds the app and serves it with `vite preview`, with a
dummy non-secret client token (a fork PR never gets secrets), and
answers the Graph API, image tiles and thumbnails from fixtures: 41
photos on a line under the parked camera and one generated 640x320 JPEG
(scripts/fixtures/street-level). All 7 photo steps now run in CI, plus a
real click on a coverage line and on a cone, the framing flight stopping
on close, the inert modal, the viewer returning into the panel, and a
reload keeping a collapsed panel collapsed (share ui token t).
- Fixture interception is limited to Mapillary hosts via CDP
Fetch.enable: page-wide request interception stalled Cesium's workers,
so the old fixture mode never drew anything on the globe.
- Failure evidence (screenshots, UI state, console, failed requests,
render errors) is written to qa-artifacts/ with keys and tokens redacted
and uploaded on failure; qa-artifacts/ is gitignored.
- Cesium render-loop errors fail the gate; Google 3D branches that cannot
run print as skips, and --strict rejects any other skip.
- Panel presses log their diagnostics, warn on a retry, and CI now fails
on any retry (QA_FAIL_ON_RETRY=1) since the rail settles; a press with
no pointerdown is a failure, not a retry.
- Assertion-gating sleeps 27 -> 1; the rejected-key "no requests" check
has a positive control.
Verified locally: strict fixture gate on the production build 28 ok + 2
"no Google 3D" skips (twice, fail-on-retry on); panel gate 5/5 plus no
render errors; live gate with a real token 25 ok + 3 fixture-only skips.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
From the IC8 review of #768, each with tests that fail before:
- P2: the expanded viewer is a real modal: while it is on screen every
other <body> child is inert (only the ones it set are restored, on
shrink, close and destroy, and when Clean View/recording/cockpit hide
it). The voice pill and toasts are not clickable while it is expanded.
- P2: the tile proxy follows redirects by hand, at most 3 hops, each one
HTTPS on exactly https://tiles.mapillary.com without credentials;
anything else is a 502 and the token never leaves that origin.
- P2: the real dev and preview server smoke tests request
/api/mapillary/status and a tile, and the browser gate first checks the
server's real status route before any interception, so CI fails if the
Mapillary plugin is not registered.
- P2: both gates press panel headers through one shared helper
(scripts/qa-panelDrag.mjs): re-resolve the header until it is under the
pointer, record what the press hit, wait on the real floating/docked
state, and retry only a press that provably missed the header.
Verified: unit 5910 pass; fixture gate 17/17; panel gate 5/5; live gate
with a real Mapillary token 22/22.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A duplicate scan of every module the PR adds (repeated 4-line blocks,
normalised) after gekh's dedup round left these:
- glyphs.js: the cone, ring and position glyphs share cachedGlyph(), wedge(),
ring() and dot(). Checked with a recording canvas: all 20 draw calls keep
the same path and fill/stroke state, so the glyphs are pixel-identical.
- panelPositionControls.js: one placeAt() for the three places that pin a
panel's top-left corner as a fixed window.
- tiles.js: one warn() for the three background-failure logs.
- Tests: src/testSupport/streetLevelFakes.mjs holds the provider snapshot
(uiState + presentation tests), the stand-in provider (core + controls
tests) and one real-ray pinhole camera (view + coverage tests, which had
each written their own). The coverage line-of-sight test still fails when
refresh() stops passing its focus.
- qa-street-level.mjs: one waitForCoverage() for the five copies of the
"on, drawn, settled, not key-gated" wait.
No behaviour change: unit 5862 pass, fixture gate 16/16, panel gate 5/5.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
From gekh's review of #768, each bug with a test that fails before:
- P2: a failed sequence load clears the previous sequence's cones, resets
the selection and can be retried; a second click while loading starts no
second lookup. sequences.js had no tests: sequences.test.mjs now covers
failure and retry, a superseded late answer, the cache and clearSelection.
- P2: closing a photo stops MapillaryJS sequence playback, which kept the
hidden viewer stepping and downloading images.
- openNearest without the panel reports it instead of loading forever, and
stops if the layer (or its provider) went off during the lookup; the
mesh sampler's misses are bounded and forgotten with its samples; the
sequence count is the union of ids across tiles; a provider withdraws
only its own error, so a sequence error cannot mask KEY REJECTED; hover
stays on (throttled) under an orbiting camera and re-picks when it
stops; "since N days" follows the clock in a long-open tab.
- A prewarm waits for one in flight and then builds if it gave up.
- New coverage for the layer core (credits, KEY REJECTED vs REQUIRED,
switching a provider off), the refresh wiring of the tilted-view fix and
the draped-to-cast swap completion.
- Cleanup: loading is derived from pending; freshStreet(); tile ranking
computes distances once and shares one path for the date line; shared
metresBetween / whenIdle / redrawTile; one NEAREST_RADIUS_M and one
source method list; unused contract fields, exports, getImage and the
decoder's image branch removed; PROVIDER_COLORS lists only Mapillary.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
From the IC8 review of #768 (P2s), each with a test that fails before:
- Switching the layer off and on during the first photo download no longer
leaves the viewer stuck on "not mounted": an outdated mount only unmounts
an adapter nobody else holds and subscribes poses only once current, and
the MapillaryJS adapter never builds a viewer after it was unmounted.
- Hover picks at most every 120 ms (the CCTV convention), not while the
camera moves or a button is held, and not after the layer went off.
- Esc shrinks the expanded viewer wherever focus is (document capture), so
the map keeps its selection, and Tab from outside returns into it.
Closing a photo moves focus to the panel instead of dropping it on body.
- Portable panels lift only after a mouse or pen moves past the drag
threshold: a click on a docked panel's edge or a touch swipe on its
header no longer turns it into a floating window, and pointercancel
saves nothing and puts the panel back.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
From the test-engineering review of #768: the rendering and panel code had
thin unit coverage (coverage.js 29% of lines, sequences/viewer/selection
~30%, cameraFollow 50%, streetLevelControls only source-text checks), and
two shipped bugs were caught only by the manual browser gate.
- coverage.test.mjs drives the real createCoverage against a fake scene and
a source whose tile requests the test resolves. It reproduces gekh's P0 #2:
a request superseded by retire() finishes after a newer one for the same
tile. Without the ownership checks it drops the newer request's key and a
refresh starts a duplicate whose lines nothing can remove (fails on the old
loadTile, passes now). It also covers the draped-to-cast swap keeping both
line sets on the globe until the cast one is built and clear() removing
both mid-swap, and a tile with nothing castable not being rebuilt.
- coverageFixture.mjs encodes Mapillary-shaped coverage tiles (sequence
lines, overview points) from lon/lat; the tests and the hermetic gate use it.
- cameraFollow.test.mjs pins the underground-camera fix: a -14,886 m sample
is ignored for bare earth, a plausible sample wins, and following stands at
eye height. Three of the four fail on the pre-fix module (the first reports
"centre at -14884 m").
- streetLevelControls.test.mjs is a contract test through the real
DataLayerManager and LayerStateCoordinator: a 360 deg click and a SINCE
release reach the durable layer state and the encoded share link under
Street Level's token. Against a stand-in layer it also covers the chip rule
(darkening the last lit chip turns the layer off, provider kept on; lighting
a dark chip is a user params request, then enable), the legend rebuilding
on a same-count swap (review #9) and the viewer resizing only on open
(review #8). With the old direct-to-layer routing, three of these fail,
including both share-link tests.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Norway's ~850 working road cameras load from one keyless GeoJSON request
to the agency's OGC API view of its DATEX 3.1 CCTV table, so no DATEX
account is needed. Faulty cameras are dropped, every camera sits under a
"Norway" category, and the ~135 that publish HLS play as live video
through the existing in-memory relay with the still as fallback. Frames
and manifests are pinned to each camera's own path on the agency hosts.
CCTV_VEGVESEN_ENABLED=0 disables the pack, CCTV_VEGVESEN_MAX_SOURCES
caps it (nearest the largest cities first) and CCTV_VEGVESEN_VIDEO=0
keeps stills only. Attributed under NLOD 2.0.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Brings in 123 commits from main, including the v0.2.0 and v0.2.1 releases
(MCP server and tool catalog, server security hardening, build hygiene).
Conflicts:
- package.json: kept main's script order and added this PR's
qa:panel-resize and qa:street-level; exports keep both sides (main's
tools/view entries and this PR's street-level and Mapillary entries).
- src/tooling/viteBuild.test.mjs: kept this PR's Mapillary-token define
assertion and main's new wildcard-host allowedHosts assertions.
- CHANGELOG.md: main now has release sections; this PR's entries go under
[Unreleased].
Checks after the merge: doctor, format:check, check:boundaries,
layer-token:check (28 published, 1 new: street-level 0), npm test (5726
pass), build, the Windows job's focused tests (70 pass), qa:panel-resize,
and the keyless street-level gate. The new CSP allows Mapillary (https:
connect/img, blob workers). The keyed gate stops at coverage locally
because the dev .env Mapillary token is invalid (upstream 403), not because
of the merge.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Binding HOST=0.0.0.0 no longer sets Vite's allowedHosts to true. The dev and
preview servers accept IP addresses, localhost and the LAN hostnames listed
in GEV_ALLOWED_HOSTS; suffix and wildcard entries are ignored. The
configuration factory takes the resolved list as an input, so build/vite.js
still reads no environment.
Ported from #97 to the current build/vite.js layout. Fixes#21.
Co-authored-by: Sameh Khamis <[email protected]>
Co-Authored-By: Claude Opus 5.5 (1M context) <[email protected]>
The OpenAI endpoints (/api/realtime/token, /api/openai/hud-summary) now
allow 30 requests per minute per client IP and the Google Places endpoints
120, the caps the Pinokio build already ships. GEV_RATELIMIT_OPENAI_PER_MIN
and GEV_RATELIMIT_GOOGLE_PER_MIN still override them and exactly 0 disables
them; an unreadable value falls back to the default rather than to
unlimited.
Salvaged from #683 onto current main.
Co-authored-by: Sameh Khamis <[email protected]>
Co-Authored-By: Claude Opus 5.5 (1M context) <[email protected]>
