Commit Graph
2418 Commits
Author SHA1 Message Date
Sameh Khamis 22ce0925a2 Run the conformance logic suite on the Cesium renderer
The conformance page can now run the logic checks against the Cesium
scene renderer as well as the stub. CESIUM_CHECKS lists the checks of
the ports Cesium already has; each phase 2 migration adds its own, so
the suite shows how far the renderer is through the contract. All eight
listed checks pass in the browser, and the stub still passes its 69.

A harness frame is one tick of the render loop, observed through
frame.on('preUpdate'). It asks for no frame itself, so a check's own
requestRender is what makes a tick draw, and a loop that stops fails
the check after five seconds instead of hanging the run. The harness
frees each WebGL context on destroy.

FrameTime.dt is now measured rather than fixed at 1/60, and renderOnce
honours timeoutMs. A scene renderer made without the models capability
has no draw.models.
2026-11-05 16:04:02 -08:00
Sameh Khamis 44106b2bfb fix(camera): hold the globe recovery while a pointer is down
Holding a drag still for half a second on a view that already showed no surface looked like a camera at rest, so the recovery turned the view down under the user's hand. The recovery now defers while a pointer pressed on the canvas is held, and runs once it is released, as for a flight or a playing scene.
2026-11-05 15:55:52 -08:00
Sameh Khamis a20076fc5e fix(camera): judge a voice tilt's frame limit by the way its pitch moves
The pre-check picked the in-place look from args.direction alone, while the tilt itself turns down for any direction but up. A tilt sent as left or right at the frame limit was checked as a turn left or right, refused as losing the globe, though it turns down toward the planet. A rotate sent as up or down was checked as a look up or down, though it turns right.

A tilt's look now comes from its goal pitch against the current pitch (tiltLook), and the tick tilts in place through tiltInPlaceWithinFrame(cam, m, goalPitch). Neither depends on the direction word, so a tilt to an absolute angle, or a tilt with no direction, can use them as they are.
2026-11-05 15:55:52 -08:00
Sameh Khamis f53342932d Merge branch 'main' into fix/globe-free-look-orbit 2026-11-05 15:52:21 -08:00
Sameh Khamis dae95e1c7f Refuse a motion after its reply's fly-to found nothing, also on Gemini
Gemini runs one turn's calls one after another. By the time "pan left" ran beside "fly to Xyzzyville", the lookup had already found nothing, so there was no flight to wait on and the pan moved the old view with ok: true. OpenAI's parallel calls refused the same reply.

The runner now remembers, for the latest reply that sent a voice fly-to, whether one moved the camera and whether one found nothing. A tilt, orbit, pan or rotate of that reply with no flight left to wait on is refused when its fly-to found nothing and none moved. The reply is Gemini's turn, passed as a per-turn reply object, or OpenAI's authorityGroup. A motion in a later reply, or beside a fly-to of the same reply that did land, runs as before.
2026-11-05 15:51:14 -08:00
Sameh Khamis 6a8afe3009 Share the Cesium ports between the app and conformance renderers
The frame, draw, camera, query and capture ports move out of the
conformance scene renderer into src/render/cesium/ports.js, unchanged.
The app's transitional renderer, now src/render/cesium/appRenderer.js,
builds the same ports over the full viewer; it still leaves out globe,
whenSettled and setTime, which would misreport photoreal tiles and stop
the app clock.

Disposing the ports now settles a pending renderOnce and detaches the
draw sets, so a model that loads after destroy is destroyed rather than
added to a destroyed collection. A viewer whose ports fail to build is
destroyed with its credits.

Checked in a browser: the app boots with one credits element, and all
eleven conformance scenes match their references exactly.
2026-11-05 15:50:48 -08:00
Sameh Khamis 1eef14454a Drop a queued voice motion when another navigation takes the camera mid-flight
A motion queued behind a voice fly-to checked only that its reply was current and that the user had not touched the map. A location-panel search, share link or file import stamps a deferred navigation without stopping the flight, so the flight landed, the motion took navigation, and the search's reassert then failed: the search was silently dropped while the camera kept orbiting.

The runner now counts camera handoffs from subscribeCameraHandoff, less the ones voice fly-tos make themselves, and each voice flight records that count when it starts. A motion whose flight saw another navigation since then is not run and says so. Voice fly-tos' own stamps do not count, so a later fly-to in the same reply, including a lookup that finds nothing, is still followed as before. The test harness now publishes handoffs and stamps its voice lookups, as the shell does.
2026-11-05 15:48:21 -08:00
Sameh Khamis c4910d24d0 Keep the place centred when a far tilt reaches the horizon
From 550 to 1,000 km of range the camera's -5° limit lies past the place's own horizon. The swing ran into its 150 m clearance, let go of the pivot and tilted the rest in place, which lifted the crosshair onto the sky (28 to 63 km up from 600 to 900 km), and a return to top-down then landed hundreds of km from the place.

The swing now hands over to an in-place tilt only where the clearance is what stops it (within about 17 km). Farther out it stops with the camera 0.5° above the place's horizon, still pivoting: a tilt to an angle reports the angle it reached with a note, a continuous tilt stops there, and a further tilt up is refused as at the limit. Tests check that the crosshair stays on the place, frame by frame for a continuous tilt, and that top-down returns over it.
2026-11-05 15:43:51 -08:00
Sameh Khamis 395eba4548 Fit the tilt wording under the Realtime prompt ceiling
With main merged, the Overpass prompt measured 55,549 against the 55,500 ceiling. The pitchDeg and direction descriptions now read 'Absolute; -89 top-down.' and 'Needed for pan/rotate/tilt steps', bringing it to 55,497. The schema pin and the measured-size note follow.
2026-11-05 15:38:32 -08:00
Sameh Khamis 8687512fc8 Merge branch 'main' into manjunath/hal-695-voice-tilt
Re-derive the Realtime schema pin for main's control_cockpit wording and this branch's pitchDeg.
2026-11-05 15:37:50 -08:00
Sameh Khamis db78d6a8e4 Add the ratchet that keeps Cesium inside the renderer
Outside src/render/cesium/, only the 236 files on cesiumAllowList.json
may reach Cesium, and each must still do so, so porting a file removes
its entry. A file reaches Cesium by importing it or the Cesium adapter,
by name or by path, or by being handed the namespace as a parameter,
binding or property. Files added to the list since origin/main fail the
check, once the list is on main. The renderer contract, stub and
conformance suite must stay Cesium-free, and runtime code in a language
the check cannot read fails it.
2026-11-05 15:10:04 -08:00
Sameh Khamis 317c3b6589 Create the application scene through a renderer plugin
createApplicationScene takes a renderer plugin, defaulting to Cesium,
which builds today's viewer and credits exactly as before. Its renderer
is transitional: it has only the members it really has, with read-only
capabilities, and a test pins the contract members still to come. Code
not yet ported reaches the viewer through cesiumViewerOf, never through
a renderer member. A plugin whose renderer has no viewer is refused and
destroyed, since the application still runs on the viewer. The result
now includes the renderer.

Not yet checked in a browser.
2026-11-05 14:51:42 -08:00
Sameh Khamis d2bc1e9d44 Convert voice action positions and distances through src/geo
Voice actions read degrees from ECEF positions with toLonLatH and
measure distances with src/geo, at the sites that only did maths. A
position that converts to NaN now reads as unknown, never as NaN
coordinates. The analyst test gives its subject a real ECEF position
instead of patching Cesium. Sites that keep a Cesium Cartographic, or
use the camera or picks, wait for the renderer ports.
2026-11-05 14:33:32 -08:00
Sameh Khamis e09b48c4ac Convert share link angles and positions through src/geo
Share links convert degrees, radians and the flight destination with
src/geo. The hash and the destination are bit for bit the same as
before; the flight itself still goes through the Cesium camera.
2026-11-05 14:28:10 -08:00
Sameh Khamis fb2bb9ae46 Match Cesium's fromDegrees exactly and keep toEcef in the stub
fromRadians divides by gamma as Cesium does, so geodetic to ECEF is now
bit for bit Cesium's, and the test checks it exactly. Its tests also
cover three height bands, points inside the Earth and NaN input. toEcef
reads the renderer contract's Position, so it moves to the stub's maths.
The ellipsoid docs pair each conversion with Cesium's.
2026-11-05 14:28:10 -08:00
Sameh Khamis 11167fa608 Add quaternions to src/geo
Ports Cesium's axis-angle, product, rotation-matrix and heading-pitch-roll
quaternions, with rotations given as frame axes. They match Cesium bit for
bit, including heading-pitch-roll frames on the polar axis. The model
convention is documented: at heading 0 the forward axis points east.
2026-11-05 14:15:13 -08:00
Sameh Khamis 5a7c7f3d57 Add the sun and moon to src/geo
A port of Cesium's Simon 1994 sun and moon positions, its TEME to
pseudo-fixed rotation and the JulianDate time handling, with epoch
milliseconds as the only input. Results are identical to Cesium's,
tested with exact equality from year -500 to 3000 and across every
leap second. Times outside the model throw a RangeError, where
Cesium's debug build throws.
2026-11-05 14:10:48 -08:00
Sameh Khamis 103ecae1f1 Read the agent world packet's camera through src/geo
The world packet converts the eye position with toLonLatH instead of
Cesium's Cartographic, so the agent-world-packet group no longer needs
cesium. Degree conversions use precomputed factors, as Cesium.Math does,
so results stay bit for bit the same.
2026-11-05 14:01:57 -08:00
Sameh Khamis e3f668831c Merge branch 'main' into denis/gev-cockpit-entry 2026-11-05 14:01:31 -08:00
Sameh Khamis 63fd559496 Keep the ridden aircraft's layer when Contacts ends, and clear its rows from Live Signals
Riding an aircraft now adopts its layer the way a direct selection does, and
Contacts gives up a dependency the user adopts, so ending Contacts mid-session
(one of its layers off, or Contacts itself) no longer turns off the ridden
layer and ends the Cockpit. When Contacts goes off, Live Signals drops the
rows built from its snapshot instead of leaving stale distances marked
CURRENT, and the feed-off warning is no longer duplicated.
2026-11-05 14:01:17 -08:00
Sameh Khamis 1d7d454dd6 Move the stub's geodesy into a Cesium-free src/geo
WGS84, ECEF and geodetic conversions, surface normals and east-north-up
frames, as plain {x, y, z} objects, exported as ./geo. A test checks
them against Cesium over random points and the poles. The stub's maths
re-exports them and keeps only the camera angle conventions.
2026-11-05 13:49:53 -08:00
Sameh Khamis a75b495cf9 Merge branch 'main' into fix/chat-provider-switch-keeps-context 2026-11-05 13:43:40 -08:00
Sameh Khamis 3dc79515bb Settle imagery, world data and sky capabilities in the renderer contract
- setFrames takes a timed source (URL frames, or video tiles in
  segments) on the scene clock by default or its own; frameReady fires
  once each time the shown frame is drawn.
- drapeOn is 'surface' | 'objects' | 'all' plus lit; imagery.host() and
  onHostChange go, and the drape rule the app derives is written out.
- ImagerySpec.fetchTile answers bytes, missing or defer on every
  renderer; tileTransform, admit and canvas imagery need imageHooks, and
  add() throws for them without it.
- Generic names for the default renderer's world data: worldDataToken,
  the photoreal fallback route, and world terrain and imagery.
- clouds and water capabilities, with globe.setClouds and setWater.
2026-11-05 13:26:14 -08:00
Sameh Khamis a7aeeb558a Settle leases, styles, credits and controls in the renderer contract
- claimPointer takes a grab filter, asked on each down: a lease takes
  only the presses it grabs, and wheel, pinch and every other press stay
  with the camera and everyone else. Each event of a press goes where its
  down went, per button, so a claim never takes a press under way.
- The app owns the styles: effects.defineStyle passes a GLSL (and optionally
  WGSL) full-screen pass, with the shader interface written out.
- Credits are plain data ({ text, href, logoUrl, inline }) that the app
  renders; CreateOptions.creditContainer goes.
- controls.coast { drag, zoom } in seconds replaces the inertia trio; the
  stub's defaults are the default renderer's, converted.
- The frame order is the default renderer's own: a move made by follow or
  in preUpdate reaches changed on the next frame.
2026-11-05 13:11:59 -08:00
Sameh Khamis b7c26351f7 Settle the draw decisions in the renderer contract
- lodGroup links items across sets as one thing at different detail;
  picks name the member shown and report the group. displayRange is
  half-open.
- An orbits capability: the renderer propagates two-line elements with
  SGP4 on the set's motion clock. The stub propagates with satellite.js.
- Height queries see draw sets only with includeInHeightQueries (was
  excludeFromHeightQueries); HeightSample.source gains 'set'.
- courseGlide is a capability; courseBlendMs eases the course on every
  renderer.
- Arc segments climb at climbMps; a negative minDtS stays for the
  aircraft warm-up.
- The star catalogue is optional, a hidden column row keeps its motion,
  and draw.clampState() reports the drape fallback.

Checks cover the climb and warm-up, lodGroup ranges, orbits against SGP4
(with and without motionSegments), hidden rows resuming, and sets not
answering height queries by default.
2026-11-05 12:50:58 -08:00
German Khokhlov b5cef8daf4 Tighten the Rio comments, notes and credits
Name each Rio feed in its credit instead of repeating the licence, drop the
deprecation history from the bus note, list Rio among the feeds with a
route-name table, and shorten the route-table header and test comments.
2026-11-05 21:29:21 +04:00
German Khokhlov 017a3bc99c Merge branch 'main' into feat/rio-transit-gtfs-rt 2026-11-05 21:21:13 +04:00
German Khokhlov e9e7ed4c1a Merge branch 'main' into german/hal-721-provider-labels 2026-11-05 21:02:35 +04:00
German Khokhlov a67c7969fd fix(transit): read Rio speeds as the m/s SMTR publishes
Both SMTR feeds now publish Position.speed in m/s. Compared with how far
vehicles moved between reports on 2026-11-05, the published values ran
3.1x (buses) and 3.6x (BRT) below the observed speed, so the km/h
conversion divided real speeds by 3.6. Drop speedUnit and the conversion.
2026-11-05 13:48:11 +04:00
German Khokhlov e5dd7c71ac Merge main into feat/rio-transit-gtfs-rt 2026-11-05 13:35:27 +04:00
Manjunath 852e93d074 fix(camera): keep a deferred recovery check through long holds
A Director hold longer than the settle check's five-minute bound used
to expire the deferred check, so a run that ended on a stars-only shot
after a long hold stayed there until the next move. While a flight or a
playing scene defers the check, its bound no longer counts down; the
flight or scene bounds the deferral itself.

Also correct the trackball note in CURRENT-STATE: Cesium's tilt tests
the screen centre, so any tilt (drag or touch) with the centre on the
stars between 1,000 and 7,500 km now tilts about the planet's edge or
does nothing, wherever it starts. Rotation drags that start on the
planet are unchanged.
2026-11-05 14:45:29 +05:30
Manjunath 29935cc094 fix(camera): run a recovery check a scene deferred once it ends
A check skipped because a flight or a playing Director scene was in
progress used to be dropped, so a run that ended or held on a stars-only
shot stayed there until the next camera move. Keep watching instead:
the settle check retries once the flight or scene ends, within its
existing five-minute bound, and a moveEnd that arrives while it is
deferred keeps the check armed rather than stopping it.

Also test that the free-look limit never raises Cesium's trackball
height and that dispose keeps a value set after install, note in its
JSDoc the enableLook case it cannot tell apart, and document the
trackball change and the retry in CURRENT-STATE and the changelog.
2026-11-05 14:36:10 +05:30
Manjunath 2f9d13f39d fix(camera): orbit on drags from the stars above 1,000 km
Below Cesium's trackball height (7,500 km by default) a drag that starts
on the stars turns the camera in place, whatever enableLook says, which
was the drag path to a view with no planet in it. Lower that height to
the free-look height with the free-look limit, never raising it, and
restore it on dispose. Above 1,000 km such a drag now orbits the globe,
as it already did above 7,500 km, at a similar rate, and a tilt drag
from the stars there tilts about the planet's edge or does nothing
instead of turning the camera. Drags that start on the planet are
unchanged.
2026-11-05 12:20:26 +05:30
Manjunath 64377db91a fix(camera): leave flights and scenes to their framing
Review follow-ups for the globe-in-view recovery and voice limits.

- Leave a camera flight in progress and a playing Director scene, holds
  included, to their own framing. The recovery is now installed with the
  scene tools, which own the Director, and reads its running state.
- Reuse a voice turn's half-degree proof only from the position and
  direction it was proven at, so a release that moves the camera checks
  the turn again.
- Share one free-globe-camera check between the recovery, the voice
  turn limit and the globe rotation.
- Keep an enableLook setting other code makes after the free-look limit
  is installed, instead of writing back the install-time value.
- Name the nudging test for what it asserts, the 1% floor, and document
  that a view losing its surface without a camera move waits for the
  next one.
2026-11-05 11:59:11 +05:30
Manjunath 1c59105a80 Judge tilts by camera pitch and follow a newer flight at once
- A tilt's angle, limits and "unchanged" check use the camera's own
  pitch. At regional range the pivot pitch is up to about 8 degrees
  shallower, so "tilt to 5 degrees" from 900 km ended at -12.9 degrees.
  The swing now solves for the pivot pitch that gives the camera angle.
- A zoom out during a pivoting tilt stops at the 1,000 km pivot limit
  instead of the orbit's 5,000 km, and a zoom in that reaches the
  clearance is applied before the pivot ends.
- An angle the camera already holds still takes navigation, so it stops
  a running motion and releases the follow camera.
- A motion queued behind a fly-to moves to a newer fly-to as soon as it
  begins, so a stalled lookup no longer holds it past a flight that
  landed. Wait listeners are removed when a wait ends, and a lookup that
  found nothing points straight at the flight that moved.
- A fly-to that stops a running motion names it (stoppedMotion).
- A tilt left or right is refused, and the pitchDeg description says
  steps use direction.
2026-11-05 11:36:29 +05:30
Itallo BrandãoandClaude Opus 5.5 ad48305dac feat(transit): name Rio routes from SMTR's published GTFS
SMTR's realtime feeds carry internal route keys, so a Rio card read
"Route O0731AAN0A" where riders know line SN731. Join both feeds to the
route_short_name in SMTR's static GTFS routes.txt (CC BY 4.0, same
publisher and terms). The keys cannot be parsed: O0014AAA0A is LECD135.
A 2026-11-04 snapshot found all 282 bus and 21 BRT routes in service in
the table; an unknown key still falls through raw.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-11-04 22:49:54 -03:00
Sameh Khamis 8db995acfc Define the renderer contract, with a stub renderer and a conformance suite
The renderer contract is what the application asks of a 3D renderer. It is nine ports
(frame, globe, draw, camera, query, input, effects, credits, quality) plus
the renderer itself, one strict .d.ts per port in src/render/contract/.
PORTS lists every member at run time, and a TypeScript-compiler test fails
when the list and the types disagree on one member. An optional member
exists only with its capability; a required one answers null or empty
without it. Nothing in the application uses the contract yet.

The stub renderer (src/render/stub/) implements every port in memory and
draws nothing. Its camera is a port of the default camera's maths: views,
lookAt, flights with their height arc and easing, rectangle framing on the
geodesic midpoint, the view rectangle with its horizon and pole cases,
changed thresholds, follows, and flights that finish inside the call.

The conformance suite (src/render/conformance/) runs 59 checks against
a renderer through the contract alone, in Node or in a browser page. The
camera checks compare traces recorded from Cesium's own Camera, headless on
a virtual clock (scripts/record-camera-goldens.mjs), to 1 mm, 1e-9 and
1e-3 px. The other checks cover listener rules on every subscription, the
frame loop, draw sets, picks, motion clocks, heights, leases, imagery,
styles, credits and quality knobs. The stub passes all of them but the
model check, which needs a glTF asset.

Reference scenes draw one scene per primitive family, a city and a
calibration path from orbit to the street, from contract calls only and
with no network. /dev/conformance/ draws them on the Cesium scene renderer
(src/render/cesium/sceneRenderer.js), records references through a
dev-server-only, loopback-only endpoint, and compares captures with
pixelmatch's antialias detection plus a solid-pixel count. Measured on
Cesium: every MSAA setting passes, and a dropped 4 px point, a dropped 2 px
line and a 1 px shift of the view fail. visual.js states the limits.

The package exports ./render/contract, ./render/stub and
./render/conformance. Documented in docs/RENDERER-CONTRACT.md,
docs/CODE-BOUNDARIES.md and docs/CURRENT-STATE.md.
2026-11-04 14:21:48 -08:00
Denis Groshev 219f3e1079 feat(cockpit): enter Cockpit with only the ridden aircraft's layer on
Cockpit entry no longer needs Contacts or both flight feeds: a civilian
aircraft needs Live Flights, a military one Military Flights. Contacts and
every other layer can be turned on or off before or during a session, and
turning off the ridden layer ends it. A Context mode change in flight still
blocks entry.

When the other air feed is off, Live Signals and the Contact card say
FLIGHTS FEED OFF or MILITARY FEED OFF · PARTIAL PICTURE instead of
presenting a partial picture as complete. Voice refuses entry with
subject-layer-off rather than contacts-inactive, and its tool description
says Contacts is not required.

Double-clicking the followed aircraft enters Cockpit through the same gate.
The Cockpit takes the scene's double-click before Cesium's stock handler,
which would otherwise untrack a followed aircraft whose model is a
primitive. The entry also shows under the Intel HUD readout, sharing the
Contacts button's face. A test keeps the classes the Cockpit adds to the
body from matching another element's rule.
2026-11-04 21:53:05 +01:00
Sameh Khamis 464c29a9ed Draw the last native world labels through the label overlay
The Directions A and B letters and a data pack's media label were the two
Cesium text labels left, kept by an allow-list in noCesiumLabels.test.mjs.
Both now publish entries to the shared world-overlay host, and the
allow-list is gone, so any Cesium label in src is a test failure.

Directions publishes the letters to the directions-markers source; the
markers keep only their points. A clicked endpoint's letter hangs over the
surface that was clicked. One placed without a click stays hidden until its
ground-floor cell resolves, then requests a render, so a still camera shows
it; a cell that settles with no height falls back to the ellipsoid. Each
position is computed once.

A pack resource handle gains label(entry). The application passes its
shared overlay host to SceneDirector through dataPacks.overlayHost; without
one a media pack fails to load rather than drawing a native label. Each
labelled resource takes a source from a pool and returns it on dispose, as
the host never removes a source, so two presentations of one pack never
clear each other's labels and repeat loads add no sources. A label written
after dispose is ignored. The media label is protected, so it always draws
as before.

Live (Denver, keyless globe): a clicked A and a programmatic B both anchor
on their dots over 1.58 km ground. Documented in docs/CURRENT-STATE.md and
docs/DIRECTOR-DATA-PACKS.md.
2026-11-04 12:30:31 -08:00
German Khokhlov 06c84f92d3 Ignore Arabic short vowels and shadda in chat autocomplete
Arabic catalog strings carry optional marks ("تتبّع"), but people type
without them, so "تتبع" found no suggestion. Fold the marks out of both
the draft and the candidates before comparing.
2026-11-04 23:35:25 +04:00
Sameh Khamis 18d6e3292d Replace Cesium monkey-patches with hooks and keep internals in one module
The arrival ground guard replaced camera.flyTo, flyToBoundingSphere,
setView, lookAt and cancelFlight with wrappers so a direct caller would stop
it. It now remembers the pose it started on and, before each retry, yields
if a flight is under way or the camera has moved across the ground, down or
around. A straight rise is not a move: Cesium's terrain collision lifts a
buried eye that way as tiles load, which is the case the guard exists for.
This also catches owners the wrappers missed (a pose written directly,
lookAtTransform), and no camera method is replaced.

Recent imagery and weather overwrote provider.requestImage (weather also
provider.credit) to ration tiles. They now state that policy as a hook with
withTileRequestHook(provider, { requestImage, credit }) from
src/render/cesium/tileRequests.js, which hands Cesium a provider delegating
to the original and leaves the original untouched.

Every private Cesium field the app reaches goes through a named helper in
src/render/cesium/internals.js: the main and offscreen pick views and their
command extents, a billboard's collection, a cluster's point collection,
the widget's render-loop latch, the WebGL context and the current camera
flight. internals.test.mjs fails when the installed Cesium stops declaring
one of them, and a source scan fails on private access anywhere else. The
cyber sonar's primitives.update wrap stays until the effects work.

Live (Austin, keyless globe): a buried eye is lifted to 253 m over a 133 m
surface; a setView or flyTo by another caller makes the guard yield; radar
loads its tiles through the hook. Documented in docs/APPLICATION.md and
docs/CURRENT-STATE.md.
2026-11-04 11:15:35 -08:00
manjunath22466 3577d19513 Cover the real provider switch and share chat Settings and stop checks
- Host test switches AI Provider from chat Settings through the real
  provider commands and checks the new mount keeps chat's context, frame,
  Back to chat and focus on the provider choice.
- Drop the open and minimized branches of the carried presentation: the
  provider choice lives only in Settings, so chat is never open then.
- One showChatSettings helper for the gear and the restore, and one
  isStoppable helper for the live-or-error check in chat and the panel close.
2026-11-05 00:17:08 +05:30
German Khokhlov 908cce915a Merge remote-tracking branch 'origin/main' into claude/hal-676-gev-fire-intensity-742bd1
# Conflicts:
#	src/i18n/locales/es.json
#	src/i18n/locales/ru.json
#	src/i18n/locales/uk.json
#	src/i18n/locales/zh-CN.json
2026-11-04 22:45:08 +04:00
Sameh Khamis 9bdeffeca3 Ask for heights through one service per scene
About 20 sites called scene.sampleHeight, globe.getHeight,
scene.clampToHeight or the MostDetailed variants directly, each with its own
idea of a miss (undefined, NaN, a throw). They now ask heightsFor(scene) in
src/queries/heights.js:

- now(point, { against, exclude }) answers from what is loaded, or null;
  against is 'surface' (what is drawn) or 'terrain' (loaded terrain only).
- clampNow(position) moves a position onto the drawn surface, or null.
- batch() and clampBatch() wait for the most detailed tiles: null per
  missed point, a rejection when the whole query fails.
- supported() reports { surface, clamp } without allocating.

Cesium still answers now() synchronously, so nothing changes on screen and
nothing is slower: in the live app 1,000 calls cost the same through the
service as direct (terrain 0.5-0.7 ms, surface 2-6 ms a call, run-to-run
noise larger than the difference). Every site already treated a miss as
"hold the last value or fall back"; a renderer that can only answer from a
cache or asynchronously can now plug in at one place.

- A Bhote Koshi evidence point whose terrain sample misses stays at its
  fallback elevation instead of reading the miss as sea level.
- The mesh floor sampler skips a scene without depth-texture support
  instead of spending its budget on probes that throw.
- The world annotation probe's trace reads hit/missed.
- A source scan forbids direct height calls outside the service.

The service is exported as ./queries/heights and documented in
docs/APPLICATION.md.
2026-11-04 09:24:30 -08:00
Sameh Khamis 02d492a079 Take pointer input through one dispatcher per scene
Every layer and tool bound its own ScreenSpaceEventHandler and picked the
same click again: with the usual layers on, one click ran about 26
scene.pick and 2 drillPick passes (120-215 ms in NYC with 18 layers). Pointer
input now comes in through src/input/dispatcher.js, one handler per scene.
A click is picked lazily and at most once per kind of query, and every
subscriber reads the same ClickEvent (pick, hit, id, ownerId, gesture,
drill, ground). The same click now costs 3 picks and 2 drills, 17-70 ms.

- Ambient onClick subscribers run only while no tool holds the pointer,
  checked once per event; tools subscribe with their lease. Moves and
  releases always reach ambient subscribers, so hover and drags end cleanly.
- Camera input and the viewer's stock select/track clicks are ref-counted
  holds (suspendCamera, suppressStockClicks). The dispatcher owns the
  controller's enableInputs, so a Cesium flight that ends no longer turns
  input back on under a drag or the cockpit.
- The draw tool, imagery box, CCTV gizmo, cockpit, directions and every
  selecting layer use it; bindTrackingClickGesture is gone (the gesture is
  on the event). A source scan forbids new handlers, enableInputs writes and
  stock-click removal outside the dispatcher.
- The sensor-style pick correction transit had now applies to every layer.
- Radio's 8-pick near-miss ring is one 17x17 windowed drill.
- A missed pick passed to pickContact is no longer picked again, and a
  touch tap's contact search shares the click's drill.
- A gizmo drag whose release Cesium never reported ends on the next press
  instead of leaving the camera held.

The dispatcher is exported as ./input with the pointer-lease functions, and
documented in docs/APPLICATION.md.
2026-11-04 08:48:51 -08:00
Denis Groshev 82f17e694e refactor(cockpit): place the camera from a per-subject eye profile
Split the Cockpit camera update into the aircraft's own front half and a
shared placeCamera that reads the eye's forward and up offsets, pitch and
ground clearance from a profile. The aircraft profile carries the existing
constants, so the aircraft view is unchanged; other subjects can now supply
their own eye.
2026-11-04 17:03:52 +01:00
Itallo BrandãoandClaude Opus 5.5 1b0b4a10dc Merge main into feat/rio-transit-gtfs-rt
Resolves the DATA_SOURCES.md conflict by keeping main's rewritten Transit
and Radio bullets and restating the count for this branch: eighteen feeds
covering seventeen regions (the two Rio feeds share one region).

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-11-04 11:53:46 -03:00
German Khokhlov 11fb45b31b Merge branch 'main' into feat/cctv-model-specs-refresh 2026-11-04 18:24:30 +04:00
German Khokhlov f79e9328d6 docs(cctv): tighten the Bosch MIC record notes 2026-11-04 18:17:26 +04:00
German Khokhlov 55e6c0017c Tighten the provider-label comments and docs 2026-11-04 18:15:16 +04:00