Commit Graph
4335 Commits
Author SHA1 Message Date
Sameh Khamis 7b4b4d4184 fix(cyclones): cards leave the map with their storms; null advisory values are left out
The world overlay drew on desynchronized 2D contexts. After a frame that
only clears, Chrome could present an earlier buffer, so storm cards and
forecast lead-hour labels stayed on screen when a snapshot without storms
(or an unavailable one) replaced them, although the overlay held no entries
and cleared every frame. Both overlay surfaces now use ordinary contexts.

The storm readout no longer prints "Unavailable" for a null value: an
advisory without pressure shows only its maximum sustained wind, one
without wind only its pressure, and one without either has no intensity
line. The advisory link stays hidden when an advisory has no link.
2026-11-14 16:56:09 -08:00
Sameh Khamis 9b8f45e62b fix(cctv): turning the layer on no longer flashes every camera before the view pass
The icon set was created shown, and the pass that hides cameras beyond the
horizon and thins crowded areas runs only from enable(), after init has
waited on the health check. Every frame drawn in that wait showed the whole
catalogue. The set now starts hidden; enable() culls, then shows it.
2026-11-14 13:21:59 -08:00
Sameh Khamis b277b55547 fix(selection): a click that follows a contact from straight down keeps the camera's heading
A click keeps the camera's view of the contact it follows (keptViewFrom),
but a follow frames the eye from its offset alone, its heading the way the
offset leans. Seen from straight down, the eye's view at a contact off the
centre leans only as far as the Earth curves between them, towards the eye,
so the follow turned the camera to face the contact's bearing (from north
to 298 degrees on a click 40 km out from 60 km up). followViewFrom keeps the
range and the tilt to the contact's horizon and turns them to the pose's
heading, a view straight down kept a hair off vertical so its heading holds.
Flights, Military Flights and trains follow from it; a world-focus fly-to,
which sets its orientation itself, keeps the view as it was.
2026-11-14 13:14:15 -08:00
Sameh Khamis d3cc95e9a6 fix(transit): a selected vehicle's trail head is one outlined line again, its centre no darker than before
The seam drew the head as two stacked translucent lanes (a 5 px dark
backing under a 3 px colour line), which darkened its centre by up to 40
of 255 over light ground. It is now one 5 px line with a 2 px dark
outline in the same pass, as the head's own material drew it before.

Conformance gains draw.lines.outlineDraped: a draped, translucent,
revealed outlined line, its centre as bright as a plain line of the
colour, its edges dark, nothing past the reveal.
2026-11-14 12:35:24 -08:00
Sameh Khamis cdd855b7ec fix(package): list the ./time export once; the seam had added it a second time at the end of exports 2026-11-14 10:14:02 -08:00
Sameh Khamis 866a9816f2 Merge origin/main into the renderer seam
Brings in main up to f24abfc88: cockpit subject providers, the render
failure notice, aircraft drawn in their own mesh colours, airport ground
vehicles, and an aircraft with no ground track facing its true heading.

Under the seam:
- The render failure notice lives in the Cesium adapter
  (src/render/cesium/renderFailure.js) and is the application hook
  renderFailureNotice({allowReload, store}); its private Cesium fields
  (Event's raise queue, the widget's render loop flag) are read through
  internals.js. The inline panel's timer waits while the frame port reports
  the loop stopped, and goes on after a Retry.
- Ordinary aircraft models draw white with the 'highlight' colour blend
  through the draw port; tracked and emergency colours tint the mesh.
- Held trains and transit vehicles hide their route set and markers through
  the draw port; the fleet model test fakes answer loads through the fake
  draw port instead of Cesium's glTF loader.
- The Cockpit's subject view follows and places the camera through the
  camera port.
2026-11-14 09:59:55 -08:00
Sameh Khamis f24abfc88f Merge pull request #1732 from bilawalsidhu/fix/adsblol-true-heading
fix(flights): an aircraft with no ground track faces its true heading, not north
2026-11-14 09:10:58 -08:00
Sameh Khamis b86014244d fix(input): no double-click follow or zoom on the map
The globe viewer's own double-click tracked a picked entity with a
position or zoomed to one without. Layers moving onto the draw port had it
re-created one by one (data/stockFollow.js); following is a click in GEV,
so the viewer's handler is removed where the viewer is made and every
re-creation goes: earthquakes, cyclones, air quality, news, perimeters,
drone airspace, ghost maps, places, radio, cables, CCTV, ALPR, launches,
bikeshare, Local ADS-B, installations, directions, trails, data packs,
annotations, the library's view and local GeoJSON. The Cockpit's own
double-click and the draw tool's finishing double-click stay.
2026-11-14 09:10:14 -08:00
Sameh Khamis bb2d22dbce fix(wildlife): the card test's click carries the exact top hit the layer now reads
4f24b9a06 made a wildlife tap read the click's exact top hit; the card
test still handed only the touch search's id, so its clicks opened no card.
2026-11-14 09:10:09 -08:00
Sameh Khamis 58776a6976 Merge branch 'main' into fix/adsblol-true-heading 2026-11-14 09:00:30 -08:00
Sameh Khamis 391e33b0d5 Merge pull request #1731 from bilawalsidhu/fleet/aircraft-mesh-colours
Draw aircraft models in their own mesh colours
2026-11-14 08:54:44 -08:00
Sameh Khamis deb42b38f7 Add the changelog fragment 2026-11-14 08:49:48 -08:00
Sameh Khamis fd06272e37 fix(flights): an aircraft with no ground track faces its true heading, not north
readsb rows (adsb.lol and a local dump1090 receiver) often send no track for
an aircraft on the ground, only its true heading. The track then read as
missing and the aircraft was drawn facing north, so one taxiing south looked
like it was moving backwards. Each normalizer now falls back to true_heading,
never the magnetic heading.
2026-11-14 08:49:29 -08:00
Sameh Khamis e72de07dab fix(rail): the selected route splits at the train and keeps its dark rim, as before
Before, the route was one clamped polyline whose material coloured it
ahead of the train and dimmer behind it, split exactly where the train is,
with a dark rim at its edges. Through the draw port it became per-segment
colours chosen by each segment's midpoint (the split jumped from vertex to
vertex) and lost its rim.

The contract gains a draped line style `split`: `color` from `at` (a
fraction of its length) on, `behind` before it (`reverse`: the other way),
and an optional `rim` (the outer `widthFraction` of its width at `shade` of
each colour). `at`, `reverse` and the colours change in place. The Cesium
renderer draws it with one material; the rail route uses it, measuring its
split in metres on the ground (one per vertex where the scene draws over
the surface). New conformance check draw.lines.split.
2026-11-14 08:33:31 -08:00
Sameh Khamis a3611caddb Fix the Local ADS-B model test name 2026-11-14 08:25:05 -08:00
Sameh Khamis 4d81d3be3a Describe aircraft models in their mesh colours in the docs 2026-11-14 08:24:51 -08:00
Sameh Khamis c2c196ab1e Add the changelog fragment 2026-11-14 08:06:59 -08:00
Sameh Khamis 8cb096fc21 Draw aircraft models in their own mesh colours
Every aircraft model (Flights, Military Flights, Local ADS-B) mixed 94% of a
flat class colour over its mesh, so airliners drew as white silhouettes and
military ones as amber. Models now use HIGHLIGHT: white leaves the mesh's own
colours as built, and the tracked and emergency colours tint the mesh without
hiding its paint. The IR boost still draws them flat white.
2026-11-14 08:06:51 -08:00
Sameh Khamis 96ef7f509e fix(render): Recent Imagery's swipe slots wait for each other's tiles without redrawing
The two slots share one small request budget through one admit hook.
When one slot held it, the other's deferred tiles asked the Cesium globe
for a redraw every 250 ms, about four extra frames a second while tiles
loaded; before, they waited for the holder's tile, whose settling draws
the frame that asks again. Layers given the same admit now share their
waits: with one of their tiles in flight, nothing more is asked for. A
layer deferring while an unrelated layer loads still retries after 250 ms.
2026-11-14 08:03:05 -08:00
Sameh Khamis ecf8b31756 fix(library): Norway's cadastre and sea depths draw to the far edge of a tilted view again
The two dense entries (cadastre from z14, sea depths from z11) were drawn
by Cesium only on globe tiles as fine as their minimum zoom, with their
minimum zoom tiles filling the coarsest of those. Through the globe port
they dropped the minimum level and refused every tile below it, so the
far band of a tilted view, one globe level coarser, was blank.

The imagery contract gains hiddenBelowMinLevel: a layer drawn nowhere the
surface is coarser than its minLevel. Cesium gives such a layer
minimumTerrainLevel as the library set it before (minLevel - 1 for Web
Mercator tiles on the geographic globe); the entries keep their minimum
level and drop the admit hook.
2026-11-14 08:01:36 -08:00
Sameh Khamis 3934be9ff9 Merge pull request #1730 from bilawalsidhu/fleet/airport-vehicle-models
Rebuild the airport vehicle models with real shapes
2026-11-14 07:45:39 -08:00
Sameh Khamis 91b080a45a fix(geo-import): KML icons stay on their points when zoomed out, and turn by heading as before
Cesium's KML loader shrank an icon's hot-spot offset with the icon and
turned a heading about the Earth's axis. The drawn pins kept the full
offset at globe distance (up to ~14 px off for the Google Earth pushpin)
and turned about local north, which differs in a tilted view. They now
scale the offset with the icon and turn about the Earth's axis by the
heading.
2026-11-14 02:03:26 -08:00
Sameh Khamis 7ba15deb5e feat(render): an icon's offset may scale with it, and an axis-turned icon turns by its rotation too
The contract gains offsetScalesByDistance: the pixel offset grows and
shrinks with scaleByDistance, as Cesium's pixelOffsetScaleByDistance does
with the same curve. rotationMode 'axis' now also turns by rotation, as a
Cesium billboard with an aligned axis and a rotation does. Cesium draws
both on its billboards; its GPU icons take the rotation and refuse a
scaled offset; the stub picks both. New conformance check
draw.icons.offsetTurn.
2026-11-14 02:03:26 -08:00
Sameh Khamis c99c577b3e fix(trails, data-packs): a scene with no page to take input from draws without a double-click
The double-click follow asked for the scene's input when a set was first
drawn. On a headless scene Cesium's event handler needs a document, so
drawing a trail or a pack threw there. Asking is guarded, as Directions
does: a scene that cannot take input has no double-click.
2026-11-14 01:55:35 -08:00
Sameh Khamis 4f24b9a062 fix(wildlife): a tap selects only a sighting exactly under it again
A click read the scene's exact pick at the tap. Through the input
dispatcher it read the click's id, which on a touch screen comes from the
wider contact search: a tap near a sighting selected it, and one near
another layer's contact kept the selection. It reads the exact top hit
again, as the shipwrecks and Local ADS-B layers do.
2026-11-14 01:51:24 -08:00
Sameh Khamis cbc0c114eb fix(local-adsb): a tap selects only an aircraft exactly under it again
A click read the scene's exact pick and a drill at the tap. Through the
input dispatcher it read the click's id, which on a touch screen comes
from the wider contact search: a tap near a local aircraft selected it,
and one near another layer's contact kept the selection. It reads the
exact top hit again, as the shipwrecks layer does.
2026-11-14 01:49:17 -08:00
Sameh Khamis 805c9b5ccd fix(voice): point-and-ask over a Street Level coverage line names its sequence again
The coverage lines were one primitive per sequence, picked as the
sequence's id. Drawn in parts, a part after the first carries its own
#n id, which point-and-ask passed on. A hit whose item names the id its
parts pick as (meta.pick) resolves as that id, as the line's click
already does.
2026-11-14 01:47:20 -08:00
Sameh Khamis d2e161372c fix(vessels): the ship the Cockpit rides is no object in view again
In-view scanning skipped a vessel whose chevron was hidden and not drawn
as its model, which covered the ship the bridge camera rides. It now
skipped only vessels past the horizon, so the ridden ship was reported,
at the camera's own position. It is skipped again unless its model draws
it.
2026-11-14 01:46:41 -08:00
Sameh Khamis 4a781f0480 fix(cockpit): the orbital view gives the field of view back on exit
Cesium's fov was saved and put back when the orbital view closed, so a
later resize or rotation kept Cesium's own behaviour. The exit held the
saved vertical angle through setFov instead, which the camera port kept
for the rest of the session: rotated to portrait, the view stayed
zoomed in. setFov(null) gives the field of view back: Cesium's fov as it
was before the first hold, the stub's own angle.
2026-11-14 01:45:27 -08:00
Sameh Khamis 03a7d8827a fix(embed): an inline panel's timer frames move the camera, take input and run the clock again
When a host stops animation frames, the panel drew from a timer with the
viewer's render(): the camera's flight and input, the clock's tick, then a
draw if due. Through the frame port it called renderNow(), which on Cesium
only forced a draw, so flights stood still, drags and zooms did nothing
and the clock stopped. renderNow takes {ifDue: true}: one tick of the
loop as its own would run it, drawing only a frame that is due (the
widget's render() on Cesium; the stub's tick without a forced request).
2026-11-14 01:43:13 -08:00
Sameh Khamis f4beb676ae fix(rail): the selected train's line draws over every network loaded before it again
Each route was a primitive added when it was drawn, so it sat over the
networks of feeds loaded until then. Its draw set was made once and kept
the slot of the first route, so a feed's network loaded after that drew
over later routes. Each route is drawn in a set made for it.
2026-11-14 01:40:41 -08:00
Sameh Khamis 0287ddb9be fix(local-adsb): the selected aircraft's trail head ends on its icon every frame again
The head was a polyline entity whose positions were read each frame. Its
draw-port line was redrawn at most every 100 ms while the aircraft flew,
so its end lagged the icon. It is drawn each frame the aircraft moves, as
the Flights trail head is; the trail still skips a head that has not
moved.
2026-11-14 01:38:50 -08:00
Sameh Khamis 6af4b08293 fix(local-adsb): a click or double-click on a UAT ring takes its aircraft again
The 978 MHz ring was a point on the aircraft's own entity, so a pick on
it was a pick on the aircraft. As a separate points set it was drawn
unpickable and a click there fell through to what is under it. The rings
are picked again and read as their aircraft.
2026-11-14 01:37:59 -08:00
Sameh Khamis aebb3e79c3 fix(wildlife): the reveal pan eases quadratic out again
The pan used Cesium's QUADRATIC_OUT; through the camera port it took
cubicOut, the contract's nearest ease. The contract gains quadraticOut,
which Cesium maps to QUADRATIC_OUT and the stub camera computes.
2026-11-14 01:37:24 -08:00
Sameh Khamis 4b665147e1 fix(traffic): road lines stack as before: flow lines jam on top, heat-lines slow over jam
The lines were one ground primitive per bucket, added free, slow, jam for
flow lines and jam, slow for heat-lines, so where roads cross the later
bucket drew on top. Through the draw port they were one set in kept order
(jam first), and its glow lines draw after its solid ones, which turned
both stackings over. Flow lines are now set free, slow, jam; slow
heat-lines go in a set made after the jam lines' set.
2026-11-14 01:35:56 -08:00
Sameh Khamis df0afa82e1 fix(library): a double-click follows a view dot and zooms to a view area or coverage border again
A view-bounded layer's features and a tile entry's coverage outline were
entities, which the default renderer's double-click followed (points) or
zoomed to (lines and areas); a new view replaced them and ended the
follow. As draw-port items they took no part in it, and the outline was
drawn unpickable. It is picked again, as its entities were.
2026-11-14 01:34:13 -08:00
Sameh Khamis 898909c245 fix(cctv): a double-click zooms to a coverage line and follows the monitor plane again
The coverage rays and cap were polyline entities, which the default
renderer's double-click zoomed to, and the monitor plane a plane entity
with a position, which it followed until the plane was removed. As
draw-port items they took no part in it. The camera icons were billboards
before, so they still take none.
2026-11-14 01:32:03 -08:00
Sameh Khamis 0dc3a1fb66 fix(bikeshare): a double-click follows the selected station again
The selected station's highlight was a point entity, which the default
renderer's double-click followed; deselecting removed it and ended the
follow. As a draw-port point it took no part in it. The station dots were
point primitives before, so they still take none.
2026-11-14 01:30:38 -08:00
Sameh Khamis 9c4c831ba2 fix(data-packs): a double-click follows a pack's point again
A pack's points and media marker were point entities, which the default
renderer's double-click followed; removing the pack ended the follow. As
draw-port points they took no part in it. Lines, polygons and images were
primitives before, so they still take none.
2026-11-14 01:29:22 -08:00
Sameh Khamis a9de7b3510 fix(trails): a double-click zooms to a trail line again
A trail was polyline entities, which the default renderer's double-click
zoomed to. As draw-port lines they took no part in it. Every trail on a
viewer shares one double-click handler, let go with the last trail.
2026-11-14 01:28:28 -08:00
Sameh Khamis 322e4a91d3 fix(annotations): a double-click follows a pin and zooms to an area or line again
A mark's ring, marker, areas and lines were entities, which the default
renderer's double-click followed (ring and marker) or zoomed to (the rest)
until the mark was removed. As draw-port items they took no part in it.
2026-11-14 01:25:45 -08:00
Sameh Khamis 94ea9cd01d fix(submarine-cables): a double-click follows a landing point or reference and zooms to a cable again
The cables, landing points and references were entities, which the default
renderer's double-click followed (a point, or a reference at its tip) or
zoomed to (a cable or area) until the sources were replaced or hidden. As
draw-port items they took no part in it.
2026-11-14 01:24:24 -08:00
Sameh Khamis d003d9ee78 fix(news): a double-click follows a marker or zooms to an outline again
The markers and outlines were entities, which the default renderer's
double-click followed (a marker, until the markers were drawn anew) or
zoomed to (an outline or hotspot box). As draw-port items they took no part
in it.
2026-11-14 01:22:44 -08:00
Sameh Khamis 6ac8aed1b5 fix(radio): a double-click follows a station again
Each station, and the selected one's dot, was an entity, which the default
renderer's double-click followed until the stations or the selection were
drawn anew. As draw-port items they took no part in it.
2026-11-14 01:20:12 -08:00
Sameh Khamis c57a8bea83 fix(alpr): a double-click follows a camera with its card again
Each camera was an entity, which the default renderer's double-click
followed, showing its card; a camera no longer shown, or a hidden layer,
took the follow with it. As a draw-port icon it took no part in it.
2026-11-14 01:18:51 -08:00
Sameh Khamis 37a1e1500b fix(air-quality): a double-click follows a station again
The stations were entities, which the default renderer's double-click
followed, framed to fit the disc; one no longer reported took the follow
with it. As draw-port items they took no part in it.
2026-11-14 01:17:37 -08:00
Sameh Khamis fbc40ef3b6 fix(earthquakes, cyclones): an item that goes takes its double-click follow with it
Removing a followed entity ended the default renderer's follow. A disc gone
from the feed, or a storm point gone from the advisory (or a cleared one),
now ends it too.
2026-11-14 01:17:08 -08:00
Sameh Khamis def2e1ecca fix(perimeters, drone-airspace): a double-click zooms to an area again
The areas were polygon entities, which the default renderer's double-click
zoomed to. As draw-port items they took no part in it.
2026-11-14 01:16:20 -08:00
Sameh Khamis 26e8e26ba8 fix(ghostmaps): a double-click follows a pin or zooms to a line or area again
Each edition was drawn as entities, which the default renderer's
double-click followed (a pin) or zoomed to (a line or polygon); an expired
report or a replaced edition took the follow with it. drawnItemTarget reads
that rule off a draw item, for every layer that drew entities before.
2026-11-14 01:15:29 -08:00
Sameh Khamis 766cf68272 fix(local-adsb): a double-click follows a local aircraft with its card again
Each aircraft was an entity, which the default renderer's double-click
followed, showing its tracked card; an aircraft that expired took the
follow with it. As a draw-port icon it took no part in it. A double-click
follow can now carry the holder whose entity record shows the card.
2026-11-14 01:12:14 -08:00