Marker and direction (reported on the PR):
- KartaView has its own marker, a purple view cone (Street View's is
blue), not GEV's default pin that Mapillary uses.
- The camera direction (marker, cones, FOLLOW, a panorama's centre) is
the direction of travel to the next photo a few metres on. KartaView's
heading is the device compass: whole drives read 0 (no compass) and
others sit a steady ~110° off. Until the drive loads the compass stands
in (0 = unknown), and the pose is sent again once the course is known.
Remaining P4s from the review of #1121:
- Segment chaining is linear (a per-point cursor) and capped at 20,000
segments a tile and 5,000 points a line: a hostile tile of 60k segments
sharing one point took 1.5 s, now tens of ms.
- Decoded tiles are dropped when KartaView is switched off.
- No network / a refused request says so and is not retried as a timeout;
an unreadable answer says so.
- A docked flat photo skips the 2,560 px download until the viewer grows.
- The panel counts the drive's photos (countActivePhotos), not the thinned
page of cones (2,250, not 217).
- After a GPU reset the viewer redraws the photo itself, so a lookup the
user started is not cancelled; a failure is still reported.
- The gate's keyless page lights KartaView and checks it draws with no key;
the fixture answers the sequence count; the line-click step checks the
camera looks along the drive when the compass says 200°.
- README/CHANGELOG show the share-link form the app writes.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
NYC DOT asks developers who use its camera feed to sign a data-sharing
agreement, and this project does not hold one that covers downstream
installs. The pack now loads only when CCTV_NYC_ENABLED=1; unset, empty
or any other value makes no request to webcams.nyctmc.org (tested).
The NYC credit carries NYC DOT's requested application disclaimer
verbatim, and DATA_SOURCES, README, CHANGELOG, CURRENT-STATE and
.env.example describe the prerequisite.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The layer recorded failure in a single `_error` string. Every city feed is
fetched independently, so one retired operator set that flag for the whole
layer — and the only code that cleared it ran on a successful *activation*,
which `runProximityCheck` skips for a city that already has rendered points.
A dead feed that re-entered camera range therefore set the flag on every
camera move and nothing ever cleared it: a permanent LOAD FAILED over a map
drawing every other city's stations.
Failure is now tracked per city in `_failedCityIds`, and `getStats()` reports
it only when the failures left nothing to draw. A city that recovers removes
its own entry rather than waiting for a neighbour to succeed.
This was reachable only because Buffalo sits 95 km from Toronto, inside the
100 km activation radius — the one dead city in the registry with a healthy
neighbour in range. The other four failed alone, where LOAD FAILED with an
empty map reads as correct, which is why the latch went unnoticed.
Probing all 33 registry systems found five dead. Three had moved and are
repointed: Reddy Bikeshare (Buffalo) to Social Bicycles, Tugo (Tucson) and
Trinity Metro (Fort Worth) to PBSC, all verified serving stations. Two are
dropped because the systems wound down rather than moved — Broward B-cycle
404s at every documented endpoint, and CoGo's replacement Lyft feed publishes
zero stations with status last reported in March 2025. `gbfs.cogobikeshare.com`
no longer resolves, so its allowlist entry goes too.
All 31 remaining systems were verified live, and every registry URL was
checked against the proxy host and path allowlists.
Toronto runs the same PBSC platform as the Austin, Honolulu and
Chattanooga systems already in the registry, and publishes the identical
GBFS v2 endpoint pair under `toronto.publicbikesystem.net`. The proxy
allowlist already admits the host through its `*.publicbikesystem.net`
wildcard and the paths end in the expected `station_information.json` /
`station_status.json`, so the system needs no new plumbing — only the
registry entry that names it.
Verified against the live feeds: 1,069 stations in both documents, all
1,069 joining on `station_id`. The layer reads `num_bikes_available`,
which Toronto populates normally, so availability renders without a
vendor-specific mapping. It does not populate the standard
`num_bikes_available_types`, reporting per-type counts under PBSC ids
(ICONIC/BOOST/EFIT/ASTRO) instead; nothing reads that field today, and
this entry deliberately does not translate it rather than adding a
mapping with no consumer.
The center is downtown at 43.6532, -79.3832 with the group's 90 km load
radius. The stations span roughly 37 km east-west, from Etobicoke to
Scarborough, so a tighter radius would drop the outer ends on a downtown
pan.
The new registry test is the reason this was cheap to be sure about: it
holds every city's feed URLs against the same host and path predicates
the proxy enforces, so a city the proxy would silently refuse now fails
the suite instead of rendering an empty layer.
Credited to Bike Share Toronto (Toronto Parking Authority). The City's
open-data package declares no licence and the feed publishes no
`license_url`, so it is treated as attribution-only, like the other GBFS
operators, rather than claiming a licence that was never granted.
The province's 511 pack covers Ontario's highways; this adds the municipal
network underneath it — roughly 336 cameras across downtown arterials plus
the Gardiner, DVP, Allen and Lake Shore, from the City's own open data.
The list is keyless and carries no frame URL, so frame URLs are built from
the convention the dataset documents (`CameraImages/loc####.jpg`) and a
camera number validated as plain digits. The frame proxy is therefore
pinned to the portal origin by construction rather than by trusting a
field. The list fetch refuses redirects, bounds the body it buffers, and
releases the transport on every rejection path.
The dataset publishes no camera facing. `D1`-`D4` look like a compass and
map trivially onto one, but they describe the *comparison* images — static
reference stills captured in 2016 and served from a different path — not
the live pan-tilt-zoom frame. A heading derived from them would be
confidently wrong for every camera in the city, so every camera takes the
shared id-hash fallback at low confidence, as headingless Austin, TfL,
Fintraffic and Calgary cameras do. A test pins that down so it is not
"fixed" later.
Names stay verbatim: the feed's labels are upper-case, and title-casing
would mangle MCCOWAN RD and ST HELEN'S AVE more often than it helped.
Carries the Open Government Licence – Toronto attribution the licence
requires. Disable with `CCTV_TORONTO_ENABLED=0`.
P1s from the correctness review, each with a regression test:
- Cones showed the wrong page of a long sequence (cache keyed by
sequence; no re-centre after a close or a same-drive line click):
KartaView always reselects, and re-centres whenever a photo of the
selected sequence opens on another page.
- A 360° photo's first frame was one colour: the canvas was sized while
hidden (1×1). It is shown first, and re-measured every frame.
P2/P3s: a storage timeout or 5xx is not remembered as archived (only
403/404/409/410 are); dense z13 tiles draw up to 1,600 lines (a third of
downtown Detroit was cut); decoded tiles are kept 10 min; a timed-out tile
is asked once more; pages are 250 photos and the newest page request goes
first; a photo far past deleted ones, or unlisted at a page edge, still
finds its neighbours; a step that gets no answer is not the end; a lost
WebGL context redraws the photo, and a failed one is retried on the next
mount; the first flat image comes from the proxy (KartaView's own can be
1.7 MB); fileurl fallbacks must be https storage hosts; oversized answers
are refused; keyboard (Shift+← →, ↑ ↓, + −) and pinch look around a
panorama; focus stays in the viewer when a step button disables. Docs:
share links with 0.m.0, keyless count, CURRENT-STATE matched to the code.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The fixture gate answers api.kartaview.org, cdn.kartaview.org and
*.openstreetcam.org from fixtures (a drive with a 360° photo, stored on
storage2 while the API names storage1) and adds three steps: keyless
coverage with its credit and hidden filters, a line click opening the
nearest photo with cones and ›, and a 360° photo on the panorama without
FIT / FILL. The Street View share-link check reads the switch field instead
of one exact entry, since a chip click records every provider's switch.
README, DATA_SOURCES, CHANGELOG and CURRENT-STATE describe KartaView.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Review on #856 (kvnloo): the analyst projection flattened a 7700 squawk and
the readsb ADS-B emergency field into the same emergency/emergencyKind pair.
- mapAnalystRecord (flights, military) adds emergencySource ('squawk' |
'ads-b' | null, from aircraftEmergency().source), emergencyBroadcast (new
pure emergencyBroadcastPhrase: "broadcasting squawk 7700 (general
emergency)" vs "ADS-B reports general emergency") and observedAtMs (the
record's lastContactEpochMs: last transponder message, epoch ms).
- emergencySource is a queryable analyst text field; the voice payload passes
it and emergencyBroadcast through, and observedAtMs only for aircraft with
a status. Tool description asks the model to narrate with the phrase.
- Source-to-analyst fixture test: OpenSky 7700 vs adsb.lol emergency=general
on squawk 1200 differ in provenance and timestamp; filterable by source.
- Voice tool-payload pins re-derived for the additive description change.
Co-Authored-By: Claude Opus 5.5 (1M context) <[email protected]>
Flights and Military Flights tint aircraft red while the latest poll
carries squawk 7500/7600/7700 or an adsb.lol ADS-B emergency status
(general/unlawful/nordo/downed). Minimum-fuel and lifeguard priorities
are reported but not tinted. The Cockpit HUD aircraft-meta line names
the broadcast code in red. The status is not sticky: a cleared code
stops highlighting on the next refresh.
The analyst/voice query engine gains squawk, emergency and
emergencyKind fields. No new source or request: OpenSky state vectors
already carry the squawk and adsb.lol/readsb carries both fields.
Built by the Hex project (Crew Leo Agile dev team).
Co-Authored-By: Claude <[email protected]>
The layer compared the server's fetchedAt with the browser's clock, so a
skewed client clock could shift or void the 30-minute window. The proxy now
returns ageMs (its own now minus fetchedAt, at serve time, on fresh, cached
and stale answers); the source refuses a snapshot without a finite,
non-negative ageMs, and the layer dates rows as its now() - ageMs. fetchedAt
stays in the payload for display.
Tests: proxy cached/stale answers report ageMs on the server clock; the
source rejects missing/invalid/negative ageMs; the layer replay test drives
ageMs. qa-gnss stubs send ageMs.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Maintainer review on #855 (mazy1998, 2026-10-06):
- records: presence (seenAt) and degraded evidence (degradedAt) age
separately, so continuing healthy reports no longer keep an older
degraded flag alive past 30 minutes; an aircraft returning after the
window starts fresh. pruneGnssObservations ages the store with no new
rows.
- Rows are dated by the snapshot's fetchedAt, which the proxy keeps on
cached and stale answers: a replay never restarts the window, the
proxy stops serving a stale snapshot older than the window, the source
refuses an undated one, and cells expire during fetch failures and
while there is no view anchor.
- Normalization accepts ADS-B versions 1 and 2 only; a missing, invalid
or negative seen_pos is not a confirmed position from the last minute.
- qa-gnss: keyboard, 390x844 viewport (fresh page: isMobile reloads) and
replay-age sections; the live cell assertion bins the returned rows
with the layer's own rules instead of a raw row count.
Review on #855: the per-aircraft rule (NIC < 7 || NACp < 8, borrowed from
the US 14 CFR 91.227 ADS-B Out minima) is GEV-defined, not gpsjam's, and
gpsjam's map shows low navigation accuracy, not necessarily jamming.
- Primary cell state is now `navigation-integrity-anomaly` (medium/high) or
`nominal`; `suspected-gnss-interference` is a secondary `interpretation`
marked validated: false.
- GNSS_PROVENANCE / gnssProvenance({ windowMs }) records the classifier
(gev-nic-nacp-v1, GEV, unvalidated), the gpsjam aggregation (formula,
bands [0.02, 0.1], FAQ source) and the GEV 30-minute visited-view window,
built from the constants the code applies. Exposed as layer.provenance
and getStats().provenance; the proxy tags responses with `classifier`.
- Visible name "GNSS Integrity", legend "... low accuracy", blurb leads with
low navigation accuracy and states the threshold is a GEV choice.
- Layer id `gnss-interference` and share token `0` unchanged.
- Voice aliases add "gnss integrity", "navigation integrity",
"low navigation accuracy"; the interference aliases stay.
- Docs describe the method as GEV threshold + gpsjam aggregation.
- Tests: provenance object, renamed state/label, proxy classifier tag;
qa-gnss asserts provenance and wording in the real app.
Hex project - Crew Leo Agile dev team.
Co-Authored-By: Claude Opus 5.5 (1M context) <[email protected]>
- Route the adsb.lol GNSS source through createReferenceSources and the
constructCatalog contract; app layer module is a thin pass-through.
- Describe the method honestly: gpsjam.org's published cell formula and
bands; per-aircraft thresholds are the 14 CFR 91.227(c) ADS-B Out minima
(NIC < 7, NACp < 8) plus readsb gpsOkBefore.
- Proxy: reuse the adsb.lol anchor parser, honour upstream Retry-After
(clamped 5-120 s), serve stale during cooldown, cap the body size.
- Layer: redraw only when a cell id or band changes, treat a settling
camera as a retry rather than a rejected enable, keep low cells visible,
skip rows without finite coordinates, state the 3-aircraft rule in the
legend blurb.
- Voice: gnss-interference in set_layer_visibility / show_data_layers_menu
plus common aliases; voice pins re-derived.
- qa-gnss: stub the route in-page (request interception stalls Cesium's
geometry workers), assert every cell is built, cover all bands over land
and sea, screenshot every state with the Data Layers row open.
Hex project - Crew Leo Agile dev team.
Co-Authored-By: Claude <[email protected]>
Bins airborne ADS-B v1/v2 aircraft that report degraded navigation
integrity (NIC < 7, NACp < 8, or readsb's GPS-loss flag) into 0.5 degree
cells over a rolling 30-minute window, coloured with the gpsjam.org
bands. Keyless: reads the capped adsb.lol point snapshot around the view
through /api/gnss-integrity, which returns integrity fields only, caches
60 s per whole-degree anchor, backs off on upstream 429 and serves the
last snapshot on failure. Adds scripts/qa-gnss.mjs.
Built by the Hex project (Crew Leo Agile dev team).
Co-Authored-By: Claude <[email protected]>
- One provider is lit at a time: lighting a chip darkens the others, and a
chip click records every registered provider's switch in one update so
the share link keeps the swap (also off Google 3D, where Street View is
not listed). The layer starts with the first default-on provider
(Mapillary, free); params that light several keep the one already on,
so reapplying them never flips (litByParams). The now-unreachable
"several lit" chip paths are gone.
- Leaving Google 3D during a Street View lookup ends it without an error
or a stuck loading state (openImage's early return resets it; the
lookup loop rechecks availability).
- A source swap during a lookup no longer reports "no imagery".
- Street View lit off Google 3D says the panel needs the Google 3D map.
- Comments trimmed to the why; keySetupCore.test.mjs back to upstream's
formatting plus the one new test (was a 551-line reformat).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Assert through computeInRangeCities that a camera over each system's
outermost live-feed station activates it, including both Kona and Hilo
for HIBike, and that HIBike stays off over Honolulu. Drop Pennsylvania
from the changelog: Philadelphia's Indego is already registered.
CHANGELOG-only conflict: the bullet stays first under [Unreleased], ahead of
the entries upstream added there. No code changes.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- The chip reads GOOGLE STREET VIEW (and its caption link likewise).
- Providers declare the imagery filters they honour (`filters`, default
pano + since). Street View declares none: every panorama is 360° and it
draws no coverage to thin, so its lookups ignore the filters and the
panel hides IMAGERY and SINCE while it is the only lit provider.
- The legend lists only providers that draw coverage lines, with
Selected only beside one: Street View alone shows no legend.
- Providers may pick their on-globe marker (`marker`); Street View's is a
Google-blue field-of-view cone from a white-ringed dot, in place of
GEV's amber pin, and switches back for a Mapillary photo.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
fetchPinnedRadioResponse built `new Response(stream, { status })` inside
the raw https response callback, which runs outside the surrounding
promise. A Radio Browser mirror answering 204, 205 or 304 (null-body
statuses), or any status outside 200-599, made the Response constructor
throw. Nothing caught it, so the whole dev/preview server process exited
and every layer went down, not only radio. The catalog's mirror failover
never saw the error.
Mirror the guard local-receivers.js already uses: null-body statuses get
a null body, statuses outside 200-599 are rejected, and anything thrown
in the callback rejects the promise so the existing error handling and
mirror failover run.
Register the keyless webcams.nyctmc.org catalog as a live CCTV source,
synthesize frame URLs from validated camera UUIDs, and keep the nearest
cameras to the five borough cores under the existing catalog ceiling.
Register four live US systems on Lyft's PBSC platform: MoGo (Detroit, 81
stations), POGOH (Pittsburgh, 60), WE-cycle (Aspen, 101) and HIBike (Kona
and Hilo, 23). The proxy already allows *.publicbikesystem.net, so no
server change is needed. HIBike's centre sits between Kailua-Kona and
Hilo so a camera over either town loads the whole system.
The test checks each system is registered, passes the proxy's host and
endpoint checks, and has an activation radius covering its farthest
station as measured against the live feed.
Conflicts with upstream's Street Level provider composition and share-state
codec, resolved:
- Street View's switch moves from its own share option (`g`) to upstream's
provider-switch field (`r`, e.g. `0.r.google-1`); a link without it keeps
Street View off. Docs and the browser gate follow.
- createApplicationStreetLevel keeps upstream's injectable provider list;
its default, once the application supplies its Street Level source, is
Mapillary plus Google Street View. Without that source there are none, as
upstream intends.
- The coverage hint keeps upstream's empty-composition message and joins
every switched-on provider's hint otherwise.
- CHANGELOG, README and SECURITY keep both sides' entries.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Docker delivers the host's own browser to the container from the container
network's gateway, never from 127.0.0.1, so the loopback-only admission gate
answered every POWER UP request with 403 and no key could be saved. The README
and CHANGELOG claimed otherwise; both are corrected here.
- keySetupCore: GEV_KEY_SETUP_TRUSTED_PEERS, an exact-address list (no
wildcards, prefixes or hostnames) admitted alongside loopback. Unset trusts
nothing, and the sharing, Host, Origin, Content-Type and proxy-header checks
all still apply to a listed address. Twelve assertions pin each refusal.
- scripts/docker-start.mjs: the container entry point, shaped after
scripts/pinokio-start.mjs. It reads the default gateway from /proc/net/route,
trusts exactly that address, and starts Vite. No gateway (--network none)
trusts nothing. The pure helpers are unit-tested and a contract test pins the
Dockerfile CMD and the loopback-only publish.
- Dockerfile: install git. `npm test` builds fixtures with `git init`, so the
suite failed 71 tests inside the image and the README's claim that it runs in
the container was wrong.
- SECURITY.md and .env.example document the setting and why it is safe only
behind a 127.0.0.1 publish; README gains the Linux/NAS id note and .dockerignore
drops macOS AppleDouble sidecars, both reported on the PR.
Verified in Docker on a clean build: saving a key from the panel writes the
bind-mounted .env (0600 in the container), it survives `compose down`/`up`, and
REMOVE comments it back out. A foreign Origin, a foreign Host, a proxy header
and a sibling container on the same network are each refused. `npm run doctor`,
`npm test` (5067 passed, 1 skipped, 0 failed) and `npm run build` are green
inside the container.
Reported-by: @jklaze
Co-Authored-By: Bogdan Petrut <[email protected]>
Co-Authored-By: Claude Opus 5 <[email protected]>
Vite's dev server is the whole app here — it serves the client and runs every
API proxy as middleware — so one container running `npm run dev` covers it, and
HOST/PORT are already env-driven.
Three details are deliberate:
- The port publishes to 127.0.0.1. Docker's usual "4173:4173" binds every host
interface, which would silently make the README's LAN warning the default for
a server that brokers configured provider keys.
- The repo is bind-mounted, so keys saved from Provider Settings, .gev-cache
and .gev-logs persist on the host exactly as they do under `npm run dev`.
node_modules stays in the image so a host install cannot shadow the
Linux-built native deps.
- The container runs as the host user, since everything it writes lands in
that bind mount. Vite's dep optimizer still needs to write inside the image's
node_modules, hence the two loosened directories.
Puppeteer's Chromium download is skipped: it is only needed by `npm run
test:track`, which the README points at the host.
Co-Authored-By: Claude Opus 5 <[email protected]>
