Import no longer loads KML, KMZ, GeoJSON and GPX through Cesium's data
source loaders. geoImportFeatures.js reads the sanitized file into plain
pins, lines, walls, polygons and ground overlays with the looks those
loaders gave them: icon, scale, colour, heading and hot spot, the shared
and inline style precedence, line and polygon colours and widths,
extruded and clamped geometry, rotated boxes and quads, and GeoJSON's
48 px pins, draped lines along rhumb lines and quarter-opacity fills.
geoImportPins.js draws them in three draw sets per file, places ground
pins through the height service (0 on the bare ellipsoid, whose coarse
tiles sag below it; the mesh nearby on photoreal maps), follows a
double-clicked pin, frames Fly-to, and shows, hides and removes them.
The Cesium adapter now draws two members the contract already had: an
icon's pixel offset and the wall shape. Image fills draw in the
translucent pass, so an overlay's own alpha blends as it did.
The Cesium allow-list is now empty; the ratchet test checks that its
scan still sees each way of reaching Cesium. The QA scripts read what a
file drew through the import's drawn(id), and the large-file check
compares it with Cesium's own reading of the same KML. A file the
renderer refuses to draw is refused by itself, without stopping its
batch. Two translations no longer used are dropped.
Each sprite layer's icon or dot set is now made at a draw order taken
from SPRITE_LAYER_ORDER through the renderer's per-set drawOrder:
flights over military, vessels, directions, transit, bikeshare, FIRMS
and CCTV, whichever layer was turned on first. Picks name the topmost
first. The orders are negative, so selection highlights, route
endpoints, the tracked plane and every other set at the default order
still draw over all sprite layers, as they did before.
The raise-to-top restorer, the sprite registry and the primitive-name
lookups are gone, which takes spriteOrder.js off the viewer-access list.
Before, the restorer raised the layers to the bottom of the scene in the
order they were enabled, so flights usually ended up under the others.
The application scene is the composition root: it now takes everything it
needs from one adapter module (src/render/cesium/application.js), which
loads, shows and releases the photoreal tileset and hands out the viewer
hooks. The conformance page keeps importing the adapter's harness and scene
renderer, since running the suite on Cesium is its purpose. Both are named
in the ratchet as the only files outside the adapter that may import it,
each limited to those modules, by name only, and the modules may not hand
out the Cesium namespace. Only geoImportPins stays on the allow-list.
The embed views fly through rendererOf's camera port with geo maths, and
the panel render loop that keeps an inline panel drawing moves into the
Cesium adapter (src/render/cesium/panelRendering.js); the application
scene hands it to the embed views as `keepRendering`. The shell reaches
the camera, effects and globe through rendererOf and loads no Cesium
factories; whether Cockpit's aircraft is an entity of the viewer's own
comes from the scene's `viewerDrawsEntity`, wired in through the
controls. Callers handing the shell or the application tools a viewer
of their own load ./render/cesium/unbound once, as the ports' unbound
check now records.
src/sky/starrySky.js and src/app/viewer.js are Cesium through and
through, so they move into the adapter as src/render/cesium/starrySky.js
and applicationViewer.js; the ./application/viewer export points there.
The celestial ring's precise ICRF rotation reaches the shell through a
Cesium-free registry (src/sky/icrf.js) that the sky provides as it
loads; the application's renderer loads it, and so does
./render/cesium/unbound. Both files leave the Cesium allow-list.
The map stacks' imagery, terrain and Google 3D factories move into the
Cesium adapter (src/render/cesium/mapImagery.js, mapTerrain.js,
google3d.js); the ./maps/imagery, ./maps/terrain and ./maps/3d exports
point there. The catalog names its ion stacks by asset number, and the
map source controller and default sources are Cesium-free: they
build providers and switch imagery layers, terrain, tilesets and the
globe's visibility through a map engine (src/maps/engine.js) that the
Cesium adapter provides as it loads (mapEngine.js), through the
application's renderer or the ./render/cesium/unbound export. The
controller and createDefaultMapSources also take it as an `engine`
option.
src/maps/catalog.js, controller.js, imagery.js, terrain.js and google3d.js
leave the allow-list.
The world annotation renderer no longer draws entities, so the checks
read the mark's primitives in the scene instead: draped fills and
outlines, built, and unchanged while the camera is still. The last
outlines are checked by picking the mark at the middle of the view.
How long the primitives take to build is reported beside the first
drawn frame.
Areas, buildings, routes, arrows, pins and labels are draw-port shapes,
lines and points, one set per mark, faded by upserting their colours.
Pins pulse their ring and size it by camera height; arrows drape.
Ground heights come from the heights service. The module leaves the
Cesium allow-list.
Unclamped colour fills are built with position and normal only, as the
entities' colour batches build them; image fills keep texture coordinates.
With the default format Cesium packed texture coordinates with the normals
and the colour appearance decoded the packed value as the normal, so lit
colour fills (an extruded column, a box) shaded darker than the same
entity.
Shapes take an alpha pulse (from, to, periodMs, forever), run before each
frame, with frames asked for while anything drawn pulses. Any other pulse,
or one on a fill that is not a colour, is refused before anything changes.
An upsert that changes only colours, pulse, show or meta is written into
the drawn primitives: unclamped shapes through their instance colours and
ring materials, clamped colour fills through their ground primitive (or
once it is ready). Shapes not yet drawn, or drawn opaque and turning
translucent, rebuild as before.
Draped lines take the arrow style. Clamped ellipses with radii by camera
height are drawn at the camera's height each frame, drawn alone up to
MOVING_SHAPES (counting those a retiring host still draws alone) and
rebuilt past that. Extruded shapes that classify their volume draw as a
ClassificationPrimitive where the scene supports it, and extruded
polygons draw their outline cage. The stub picks clamped rectangles,
ellipses and classifying volumes, outside their holes. Conformance
checks radii by camera height and classifying volumes on both renderers.
The wind relief now asks the globe port for hillshade surface shading at
0.28 instead of building a globe material itself; the Cesium globe port
draws the same view-directed shading, over terrain normals or the globe's
curvature, and the unbound provider now lists surfaceShading. The wind
layer's canvas flow, bounds, imagery fade and render requests go through
the camera, frame and query ports, so src/layers/wind/rendering.js and
relief.js leave the Cesium allow list.
A refused shading request is taken back so it never shows after Wind is
off, and a camera height that is not a number falls back as before.
The application layers and standalone catalog entries no longer load the
unbound factories themselves: a viewer with no renderer bound
needs render/cesium/unbound loaded first. The contract and current-state
docs say what the Cesium adapter's fields and surface shading do now.
The Cesium draw port now implements draw.field for the windStreamlines
kind (src/render/cesium/drawStreamlines.js). It carries the flow shader,
the 30-degree cells, horizon and frustum culling and the path tracing over
from the wind layer. It moves the highlight on the page's own frames, at
most every 32 ms, and only while the field shows, is unpaused, has alpha
and some cell is in view on a visible page. A grid no path runs through,
or one short of the whole globe, is refused. A rebuild that fails draws
nothing and is never told drawn.
The wind layer's GPU flow (src/layers/wind/gpuRendering.js) now builds the
spec, fades it by camera height and pauses it through the draw, camera and
frame ports, and no longer reaches Cesium, so it leaves the Cesium allow
list. The layer runs no animation loop of its own while the renderer draws
the flow; the canvas fallback is unchanged and still takes over wherever
the field is refused. A new conformance check covers the field's 'drawn'
events.
The Cesium draw port now implements draw.field for the rasterShell kind
and advertises the 'fields' capability. The shell surface (a raised
rectangle with a detail window, drawn in primitive order without depth
writes) moves from the weather layer into src/render/cesium/drawFields.js.
A new rectangle or height is drawn invisibly first and swapped in whole,
and 'drawn' is told in the frame of the swap. A stage of older content
never replaces the drawn one while newer content decodes. A field hidden
mid-stage keeps building it.
The weather shell (src/layers/weather/shellRendering.js) now drives one
field through the draw, camera, frame and globe ports and no longer
imports Cesium, so it leaves the Cesium allow list. The wind shell on
photoreal hosts also draws through draw.field. The conformance page runs
each visual scene on its own, so a kind the Cesium renderer does not draw
yet (scalarRaster) fails only its own scene.
The cyber sonar scene now sets a screenModulation sector each tick that
draws and at the renderer's sonar cadence, and clears it outside the Cyber
map theme. A renderer without the capability, or one that stops listing
the pass, leaves markers native and reports the contact GPU unavailable,
while the HUD sweep keeps its clock. The old Cesium command wrapper is
removed; cyberSonarGpu.js and cyberSonarScene.js leave the allow-list.
The adapter's effects port now has screenModulation: a contract sector
shades points, billboards (labels among them) and icon sets in their own
vertex shaders, swapped into this scene's command list as the primitives
update, and tints models on the CPU after every owner has written its
colour. Geometry and picks are unchanged. It is the sweep the cyber HUD
already draws, carried into src/render/cesium/screenModulation.js and
driven by a sector instead of document settings; nothing is installed
until a sector is set, and disposal gives everything back.
The capability is advertised on the Cesium version the command swap is
tested against; diagnostics list the pass while it draws, and listeners
hear when it starts or stops (a native shader it cannot take stops it).
A set asks for a frame unless it changes nothing drawn: the same sector,
or only the angle of a sweep while no shaded marker was in view.
cyberSonarSector() gives the sector for the cyber sweep; the app switches
to the port in the next commit.
Conformance: the screenModulation check runs on Cesium; new checks read
the pixels (in the band an icon draws, outside it and at radius 0 it dims
to the floor, strength 1 draws it in the colour, clearing restores it) and
check the member is absent without the capability.
The traffic layer keys its cached road heights by the globe port's
surfaceVersion() and waits on isSettled('surface') instead of reading the
scene through render/cesium/surfaceState.js, which is gone. Heat-lines are
always asked for draped; the layer no longer checks whether the scene can
drape and drops them. The traffic layer and application/sources no longer
reach Cesium, and src/layers/traffic/rendering.js leaves the Cesium list.
Where the Cesium renderer cannot drape (no depth textures), its draw port
now draws every draped line over the surface, as the contract asks: along
the surface's curve between its positions, in its colour where the surface
hides it, hidden past the horizon (tested along its arc, shown in 2D). A
segmented line runs from its first shown segment to its last, in its style
colour. A line whose positions hold what they held takes a new colour in
place, so pulsing jam lines build nothing per frame; one that moves is
built anew alone.
src/services/groundSnap.js and src/services/meshFloorSampler.js no longer
reach Cesium. Whether the surface has streamed comes from the globe port
(the snap waits for the 'tiles' and 'surface' settle kinds; the sampler
runs only with the globe hidden and 'surface' settled), the camera height
gate from camera.pose(), heights from the query port, and the maths from
src/geo/ellipsoid.js. The raw exclusion path is gone: callers see through
their own draw sets by id. Cockpit's ground probe names the tracked
contact's icon and model sets, which the flights and military layers keep
on its entity record (groundSets), instead of the tracked holder object.
Probing is unchanged: at the caller's point, up to eight readings per cell
about 17 m apart, a read answering from the nearest one.
The application operations entry is now Cesium-free: a viewer with no
renderer bound needs ./render/cesium/unbound loaded first. Tests that used
to get the adapter's factories through ground snapping load it themselves.
The frame-pass source check ended at the old occluder and so scanned the rest
of the file; it now ends where the frame pass does. A draw-port pick carries
{set, id, meta}, so the sprite's pick is compared by its id.
The dispatcher now builds on renderer.input and the query port, with
positions as plain {x, y}. Its viewer access count is zero and it leaves
the Cesium allow-list. Layers that read the raw engine pick read the Hit,
drawHit or event.native instead, and pickRegistry's resolvePickId and
pickContact take a Hit, with the raw versions kept in the Cesium adapter.
rendererOf gains findInput, provideUnboundInput and provideNativeClick.
event.native carries the engine's pick, drill and pickWindow, and picks
through the follow helper happen inside it. An unbound input port
survives the viewer being bound until it is released.
The query port's pick memo is now per task rather than per frame,
because Cesium's own picks advance the frame number. A click on the sky
skips the depth pass when nothing is on the ray. Touch contact search
keeps its eight-deep drill in a 14x14 window.
Keeping a cell's lowest reading let a street probe pull a vehicle on a viaduct
or bridge in the same cell down to street level. Readings now stay at the point
they were taken (up to eight per cell, about 17 m apart), a read answers from
the reading nearest the vehicle, and two readings within about 5 m keep the
lower.
The rendered-mesh floor took one probe at each coarse cell's centre and kept it
for the session. A centre on a roof passed the +80 m DEM window and lifted every
vehicle in the cell to roof height (a Haymarket bus drew 23.5 m above the
street); a centre in the river put Red Line trains on the Longfellow Bridge
6-9 m under the deck. The sampler now probes at the caller's point, reads a
latched cell again at up to four points apart from each other, and the gate
keeps the lowest reading that passes.
Transit drew its vehicles into two Cesium billboard collections and culled,
turned and floored them through the Cesium scene. It now draws them as two
draw-port icon sets, still and moving, registered with the sprite order by
set id in the same places. Each marker is a plain record; a frame writes the
changed ones in one upsert per set, and markers taken out in one task go in
one removal. Clicks read the draw-port hit.
Visibility uses the query port's horizon test and the frustum planes of the
camera port's pose. Icons stay turned in screen space by an exact projection
through the query port, the same answer the Cesium helper gave. The flat
globe is told from terrain by asking the height service once per surface
change; floors are read again when the answer flips. The mesh floor sampler
sees through the layer's sets by id. The camera pose and surface version are
read once per task.
The Cesium draw port now moves and turns an icon without restyling it. The
GL upload probe moves to src/render/cesium/uploadProbe.js, which the QA
scripts hand to the frame probe; the QA scripts read the billboards drawn for
each set.
The box being dragged was two Cesium entities on a data source of its own.
It is now a clamped colour rectangle in a shapes set and a draped dashed
outline in a lines set, both unpickable, with the same colour, alpha,
width and dash length. The Cesium draw port now redraws a moved clamped
fill in the frame it moves, so the box shows on every frame of the drag.
The fill shows once the box has an area. The outline shows once the box
has any extent, so a drag along one axis still draws a line. The last box
is kept hidden between drags, and the next drag moves it.
markBaseTileset moves to a Cesium-free module, src/render/baseTilesets.js.
The globe port reads it and re-exports it, so a tileset a caller marks
as its base is still draped on. rendering.js no longer imports Cesium or
reaches the viewer and leaves the Cesium allow-list. The application's
tools loaded the globe factory only through it, so embed.js now loads it.
A clamped colour fill (a polygon, a fixed-radius ellipse or a rectangle)
whose upsert changed only its geometry rebuilt its set's ground primitive
batches asynchronously, and each upsert dropped the build in flight, so a
shape dragged every frame never drew. Once Cesium's terrain heights are
loaded, such a fill is now drawn alone where it now is, on a ground
primitive built in the same frame with the same pick id, and hidden in its
batch and in a host still retiring. That mirrors how a moved draped line is
drawn.
A set draws at most MOVING_SHAPES fills alone, counting those a retiring
host still draws; an upsert that would draw more rebuilds as before. A set
whose moved fills have been still for SETTLE_FRAMES drawn frames rebuilds
once, so they go back into its batches. If a second rebuild drops the host
drawing a fill alone before that host is ready, the fill shows again where
the retiring host draws it, unless it is hidden or gone.
An icon set drawn as Cesium billboards now changes an upsert in place
without walking the whole set when every touched item is already drawn
with the image it has, and writes only the position (and the course
axis that follows it), the pick record and the shown state when an
item's look is unchanged since it was last drawn. A layer that moves
hundreds of icons a frame through the draw port then costs a few times
a direct billboard write rather than thirty: 800 icons took 1.1 ms a
frame and now 0.18 ms in a Node benchmark, 3,000 took 4.4 ms and now
0.5 ms. What is drawn is unchanged; any add, removal, reorder, image
change or other restyle takes the existing path.
Five new camera conformance scripts move the camera by user input: a
left drag that coasts, thirty pixel-mode and thirty line-mode wheel
notches from 5 km, a middle-drag tilt, and Shift and Ctrl drags held too
long to coast. The runner turns input steps into pointer events for a
driver: a move starts where the pointer last pressed or moved and carries
the held button. The golden recorder now drives Cesium's own screen-space
camera controller on a stand-in canvas, with Date on the virtual clock so
inertia is deterministic. The existing goldens are unchanged.
A harness that answers pointer input sets cameraInput and a pointer hook.
Harnesses without it, such as the stub, skip the input scripts.
The input port reported a line-mode wheel at 33 1/3 pixels a line. It now
counts lines as the reference does, 40 pixels a line and 3 lines a page,
so a pixel or line wheel converts back to the same pixels.
The geo export now has geodesicAt and horizonFrom. The camera events module
is a public export (./render/camera/events) and holds move detection and the
command hooks as well as the per-listener changed measure; the stub camera
uses them. Each onCommand registration is now its own, so removing one twin
leaves the other. The stub's testing.drawnPosition says where it draws an
item, so a camera that is not the stub's can follow drawn items.
Transit lowered the one camera-change threshold every listener shared to
0.05, through a claim ledger. The camera port measures each listener
against its own threshold, so Transit now asks for 0.05 on its own port
listener, nobody else's trigger changes, and the ledger goes.
A new listener measures from the view at the next tick, so the layer looks
at the view once more after that tick, and a move made in between is not
missed. Disable always removes both subscriptions.
The billboards, the occluder and frustum checks and the frame probe still
drive Cesium, so the renderer stays on the Cesium list.
sensorPickPosition returns {x, y} rather than a Cesium Cartesian2 and is
handed the canvas it sizes by, so it no longer reaches Cesium or the
viewer and leaves the Cesium allow-list. The style records stay keyed by
the scene object.
The cloud layer takes latitude, longitude and height from pose() and its
angle conversion from geo/vector, so it no longer reaches Cesium and
leaves the Cesium allow-list.
ModulationSector gains radius and floor and says what it dims and what it
leaves alone; picks are unchanged and setting or clearing a sector asks
for one frame. The stub names its pass screenModulation, and a
conformance check covers the pass, the frame request and the pick.
windStreamlines takes alpha and paused; rasterShell replaces detailWindow
with a detail image and rectangle and says how shells stack, blend and
update; FieldHandle.on('drawn') says once per change that it is drawn,
never while hidden. The stub fires it on the render after a change, and a
conformance check covers it. The Cesium adapter has no fields yet.
The globe port takes the globe's material only when it is free, follows a
terrain change, lets go of a material someone replaced, and takes it again
once it comes free; idle ticks ask for no frame.
A new capability, surfaceIdentity, adds globe.surfaceVersion(): a number
that changes whenever what surface heights answer against changes (base,
terrain or photoreal swapped, the globe shown or hidden) and never on
camera moves or tile loads, so the app can key cached heights by it. The
settle kind 'surface' says whether that surface has loaded what is in
view: the terrain while the globe is shown, otherwise the drawn tiles,
false with neither; a renderer without the capability answers it as base.
The Cesium globe port reads both off the scene, so a base changed around
the port counts too; its versions come from one counter shared by every
port. The stub bumps on real base, terrain, photoreal and visibility
changes. A conformance check and a globe port test cover them.
ShapeItem.lit picks the renderer's fixed light or a flat colour; omitted,
extruded shapes and boxes are lit and the rest flat, as they were. The
Cesium draw port lights unclamped colour and image fills by it; clamped
shapes still drape unlit. A new reference scene, shapes-lit, draws a lit
and a flat box and square.
LineItem.mode now says a renderer that cannot drape at all draws draped
lines and clamped shapes as overlay, and clampState() says overlay. The
Cesium port says overlay when its context has no depth textures, which
only a WebGL 1 context can lack.
The satellite dots, the tracked satellite's dot and the orbit rings now go
through the draw port instead of a raw point collection, an entity and
primitives, so the layer's rendering no longer drives Cesium and leaves the
Cesium allow-list.
- Dots are one points set, patched in place and sent once per frame.
- The tracked dot is its own set, drawn at the sample the follow camera
framed (or after the frame's own sample when no camera read it).
- Rings are geodesic lines with a behind-the-globe colour, turned about the
pole by the sidereal angle in the layer each second, since the port has no
inertial frame. The orbit frame matrix is a plain 16-number array, and
the launches layer now receives plain ECEF orbit positions.
- Clicks match the draw hit against the layer's own sets.
- The focus pass projects every dot in one batched call.
- Depth-fail lines in the Cesium draw port honour pickable: false.
Among sets that skip the depth test, a higher drawOrder draws over a lower
one whatever order they were made in, and picks name them topmost first.
Cesium draws the earlier of two opaque near-plane icons on top and picks
it, so the draw port stacks the sets' hosts with a higher order earlier,
ties in the order the sets were made. Hosts trade places only among the
slots draw-set hosts already hold, so no other primitive moves; nothing
moves while every set is at 0. Translucent items blend
order-independently in Cesium and are not ordered by it.
The stub sorts its hits the same way. A conformance check draws two icon
sets at one spot and swaps their orders.
The query contract now says picks answer against the scene as drawn before
effects, and that a drillPick limit bounds the work as well as the answer:
the renderer stops at `limit` hits and looks through at most
max(limit, 16) things under the pointer. The Cesium query port passes that
depth to Cesium's drill (a pick looking under something unpickable stays
unbounded), a click's drill caches one pass per depth, and the stub counts
unpickable items toward the depth.
CameraPose says fovy and aspectRatio describe the nearest centred
perspective frustum, the exact projection being in matrices().
A changed listener's own threshold is now the capability
cameraChangeThreshold; without it every listener fires at 0.5. The Cesium
and stub cameras have it, measured per listener without touching Cesium's
shared percentageChanged.
Conformance: draw.drillPick checks limit 0, never the surface, nothing over
the bare globe, an unpickable cover, nearest first and a bounded prefix;
query.pickBeforeStyles picks an icon under a mirroring style; the threshold
trace is skipped without its capability.
The site dots, outlines and selected footprint fill are now draw-port sets
(points, draped lines, clamped shapes) instead of Cesium entities. The
selected site's dot is drawn by a set of its own, so selecting a site
redraws no other dot. Selection is registered through plain carrier
objects in the context store, as the local GeoJSON layer does, and the
tracked card reads the site's label and position from the carrier's entity
record.
A double-click on a site dot now follows it through camera.follow (gated on
the stock double-click follow), centred on the surface under the dot when
its height is loaded; one on an outline or fill zooms to it. Hiding the
layer stops a follow it started. The layer no longer lowers the shared
camera change sensitivity: its own camera-port listener carries its
threshold.
The follow offset fitting moves to src/geo/frames.js and is shared with
the local GeoJSON layer. rendering.js leaves the Cesium allow-list
(33 -> 32); the layer's entry joins DRAW_FROM_CALLER.