With readings kept per point, the floor a vehicle gets depends on which point
is probed and where it is read. Transit offered the sampler the first point of
each vehicle's path in a cell, usually its oldest fix there, so a vehicle that
stayed in one cell never had its current spot probed. It now offers the latest
point of the path in each cell, and the newest fix in the vehicle's own cell
(the selected vehicle's history is walked newest first).
The grounded-flight display clamp read the floor at its sticky cell's centre,
which now answers from the reading nearest the centre, not the contact. It
reads at the contact's own position, held inside the sticky cell so boundary
hysteresis still applies.
On the photoreal stack the rendered-mesh floor took one probe at each coarse
cell's centre (0.001 degrees) and kept it for the session. A centre on a roof
passed the +80 m DEM window and lifted every vehicle in the cell to roof height
(a Haymarket bus drew 23.5 m above the street, on the garage roof); a centre in
the river put Red Line trains on the Longfellow Bridge 6-9 m under the deck.
The sampler now probes at the caller's point. A cell with a reading is probed
again only at spots about 17 m apart from earlier ones, eight at most, and a
spot refused only because the cell's DEM prior was cold is tried again later.
The floor keeps each reading that passes the gate at the point it was taken
(two within about 5 m keep the lower; sixteen at most per cell) and answers a
read from the reading nearest the asked point, so a viaduct and the street
beside it in one cell keep their own heights.
Each sprite layer's icon or dot set is now made at a draw order taken
from SPRITE_LAYER_ORDER through the renderer's per-set drawOrder:
flights over military, vessels, directions, transit, bikeshare, FIRMS
and CCTV, whichever layer was turned on first. Picks name the topmost
first. The orders are negative, so selection highlights, route
endpoints, the tracked plane and every other set at the default order
still draw over all sprite layers, as they did before.
The raise-to-top restorer, the sprite registry and the primitive-name
lookups are gone, which takes spriteOrder.js off the viewer-access list.
Before, the restorer raised the layers to the bottom of the scene in the
order they were enabled, so flights usually ended up under the others.
The application scene is the composition root: it now takes everything it
needs from one adapter module (src/render/cesium/application.js), which
loads, shows and releases the photoreal tileset and hands out the viewer
hooks. The conformance page keeps importing the adapter's harness and scene
renderer, since running the suite on Cesium is its purpose. Both are named
in the ratchet as the only files outside the adapter that may import it,
each limited to those modules, by name only, and the modules may not hand
out the Cesium namespace. Only geoImportPins stays on the allow-list.
The embed views fly through rendererOf's camera port with geo maths, and
the panel render loop that keeps an inline panel drawing moves into the
Cesium adapter (src/render/cesium/panelRendering.js); the application
scene hands it to the embed views as `keepRendering`. The shell reaches
the camera, effects and globe through rendererOf and loads no Cesium
factories; whether Cockpit's aircraft is an entity of the viewer's own
comes from the scene's `viewerDrawsEntity`, wired in through the
controls. Callers handing the shell or the application tools a viewer
of their own load ./render/cesium/unbound once, as the ports' unbound
check now records.
src/sky/starrySky.js and src/app/viewer.js are Cesium through and
through, so they move into the adapter as src/render/cesium/starrySky.js
and applicationViewer.js; the ./application/viewer export points there.
The celestial ring's precise ICRF rotation reaches the shell through a
Cesium-free registry (src/sky/icrf.js) that the sky provides as it
loads; the application's renderer loads it, and so does
./render/cesium/unbound. Both files leave the Cesium allow-list.
The map stacks' imagery, terrain and Google 3D factories move into the
Cesium adapter (src/render/cesium/mapImagery.js, mapTerrain.js,
google3d.js); the ./maps/imagery, ./maps/terrain and ./maps/3d exports
point there. The catalog names its ion stacks by asset number, and the
map source controller and default sources are Cesium-free: they
build providers and switch imagery layers, terrain, tilesets and the
globe's visibility through a map engine (src/maps/engine.js) that the
Cesium adapter provides as it loads (mapEngine.js), through the
application's renderer or the ./render/cesium/unbound export. The
controller and createDefaultMapSources also take it as an `engine`
option.
src/maps/catalog.js, controller.js, imagery.js, terrain.js and google3d.js
leave the allow-list.
Areas, buildings, routes, arrows, pins and labels are draw-port shapes,
lines and points, one set per mark, faded by upserting their colours.
Pins pulse their ring and size it by camera height; arrows drape.
Ground heights come from the heights service. The module leaves the
Cesium allow-list.
Unclamped colour fills are built with position and normal only, as the
entities' colour batches build them; image fills keep texture coordinates.
With the default format Cesium packed texture coordinates with the normals
and the colour appearance decoded the packed value as the normal, so lit
colour fills (an extruded column, a box) shaded darker than the same
entity.
Shapes take an alpha pulse (from, to, periodMs, forever), run before each
frame, with frames asked for while anything drawn pulses. Any other pulse,
or one on a fill that is not a colour, is refused before anything changes.
An upsert that changes only colours, pulse, show or meta is written into
the drawn primitives: unclamped shapes through their instance colours and
ring materials, clamped colour fills through their ground primitive (or
once it is ready). Shapes not yet drawn, or drawn opaque and turning
translucent, rebuild as before.
Draped lines take the arrow style. Clamped ellipses with radii by camera
height are drawn at the camera's height each frame, drawn alone up to
MOVING_SHAPES (counting those a retiring host still draws alone) and
rebuilt past that. Extruded shapes that classify their volume draw as a
ClassificationPrimitive where the scene supports it, and extruded
polygons draw their outline cage. The stub picks clamped rectangles,
ellipses and classifying volumes, outside their holes. Conformance
checks radii by camera height and classifying volumes on both renderers.
The wind relief now asks the globe port for hillshade surface shading at
0.28 instead of building a globe material itself; the Cesium globe port
draws the same view-directed shading, over terrain normals or the globe's
curvature, and the unbound provider now lists surfaceShading. The wind
layer's canvas flow, bounds, imagery fade and render requests go through
the camera, frame and query ports, so src/layers/wind/rendering.js and
relief.js leave the Cesium allow list.
A refused shading request is taken back so it never shows after Wind is
off, and a camera height that is not a number falls back as before.
The application layers and standalone catalog entries no longer load the
unbound factories themselves: a viewer with no renderer bound
needs render/cesium/unbound loaded first. The contract and current-state
docs say what the Cesium adapter's fields and surface shading do now.
The Cesium draw port now implements draw.field for the windStreamlines
kind (src/render/cesium/drawStreamlines.js). It carries the flow shader,
the 30-degree cells, horizon and frustum culling and the path tracing over
from the wind layer. It moves the highlight on the page's own frames, at
most every 32 ms, and only while the field shows, is unpaused, has alpha
and some cell is in view on a visible page. A grid no path runs through,
or one short of the whole globe, is refused. A rebuild that fails draws
nothing and is never told drawn.
The wind layer's GPU flow (src/layers/wind/gpuRendering.js) now builds the
spec, fades it by camera height and pauses it through the draw, camera and
frame ports, and no longer reaches Cesium, so it leaves the Cesium allow
list. The layer runs no animation loop of its own while the renderer draws
the flow; the canvas fallback is unchanged and still takes over wherever
the field is refused. A new conformance check covers the field's 'drawn'
events.
createApplicationTools returns drawShape({ shape, signal }): it opens Draw
for one area or line and resolves with its Polygon or LineString without
placing a mark, or null when draw mode is left, the signal aborts, a newer
request replaces it, the pointer is held elsewhere or the tool goes. The
shape controls cannot change the asked-for shape, and a shape across the
antimeridian is refused as a row's actions refuse it and drawn again. It
also returns pointerFree, so an application's own click handlers yield to a
tool holding the pointer, as the layers' do.
The Cesium draw port now implements draw.field for the rasterShell kind
and advertises the 'fields' capability. The shell surface (a raised
rectangle with a detail window, drawn in primitive order without depth
writes) moves from the weather layer into src/render/cesium/drawFields.js.
A new rectangle or height is drawn invisibly first and swapped in whole,
and 'drawn' is told in the frame of the swap. A stage of older content
never replaces the drawn one while newer content decodes. A field hidden
mid-stage keeps building it.
The weather shell (src/layers/weather/shellRendering.js) now drives one
field through the draw, camera, frame and globe ports and no longer
imports Cesium, so it leaves the Cesium allow list. The wind shell on
photoreal hosts also draws through draw.field. The conformance page runs
each visual scene on its own, so a kind the Cesium renderer does not draw
yet (scalarRaster) fails only its own scene.
- "destination refresh" is the refresh at the place the camera flew to,
so restore "son actualisation à destination".
- Radio note: "que vous la demandez par la voix", "Votre adresse IP".
- "{count} / 30D": "30 J", like "{days} j".
- Starlink: "la couche complète", as in the active-state tooltip.
- "Show {name} sighting": colon form, so names starting with a vowel
do not break the elision after "de".
- Wildlife note: Acartia is the source, not a kind of marine mammal.
- Straight apostrophes in the five strings added on main since.
The cyber sonar scene now sets a screenModulation sector each tick that
draws and at the renderer's sonar cadence, and clears it outside the Cyber
map theme. A renderer without the capability, or one that stops listing
the pass, leaves markers native and reports the contact GPU unavailable,
while the HUD sweep keeps its clock. The old Cesium command wrapper is
removed; cyberSonarGpu.js and cyberSonarScene.js leave the allow-list.
Rouen now reads Métropole Rouen Normandie's TCAR vehicle feed
(api.mrn.cityway.fr) and Le Havre LiA's own GTFS-RT
(opendata.transports-lia.fr), both listed in their transport.data.gouv.fr
records, instead of the unofficial bus-tracker.fr relay. LiA ids carry an
8- prefix, so a new liaRouteLabel strips it and liaRouteMode reads the line.
- Prague PID: map route-id ranges from PID's GTFS (metro L991-993, S/R trains
L1000s/L1100s, P ferries L1800s, trolleybuses 50-59, X lines, funicular LD)
instead of 'below 100 is a tram, rest bus'.
- Bordeaux TBM: trams ride numbered ids 59-62/163/164 (A-F), boats 951-953;
the old letter match never fired.
- Rouen Astuce: TCAR:90 Metro as tram, TCAR:99 Calypso as ferry; Le Havre FUNI.
- Warsaw and Poznan: credit carries the data date (and Warsaw links its API),
as their terms require.
- data.gov.my feeds: CC BY 4.0, refreshMs 30 s to stay under 4 requests/min;
proxy honours per-feed refreshMs.
- Denver: quote the RTD agreement; tests use the feeds' real route ids.
The adapter's effects port now has screenModulation: a contract sector
shades points, billboards (labels among them) and icon sets in their own
vertex shaders, swapped into this scene's command list as the primitives
update, and tints models on the CPU after every owner has written its
colour. Geometry and picks are unchanged. It is the sweep the cyber HUD
already draws, carried into src/render/cesium/screenModulation.js and
driven by a sector instead of document settings; nothing is installed
until a sector is set, and disposal gives everything back.
The capability is advertised on the Cesium version the command swap is
tested against; diagnostics list the pass while it draws, and listeners
hear when it starts or stops (a native shader it cannot take stops it).
A set asks for a frame unless it changes nothing drawn: the same sector,
or only the angle of a sweep while no shaded marker was in view.
cyberSonarSector() gives the sector for the cyber sweep; the app switches
to the port in the next commit.
Conformance: the screenModulation check runs on Cesium; new checks read
the pixels (in the band an icon draws, outside it and at radius 0 it dims
to the floor, strength 1 draws it in the colour, clearing restores it) and
check the member is absent without the capability.
The traffic layer keys its cached road heights by the globe port's
surfaceVersion() and waits on isSettled('surface') instead of reading the
scene through render/cesium/surfaceState.js, which is gone. Heat-lines are
always asked for draped; the layer no longer checks whether the scene can
drape and drops them. The traffic layer and application/sources no longer
reach Cesium, and src/layers/traffic/rendering.js leaves the Cesium list.
Where the Cesium renderer cannot drape (no depth textures), its draw port
now draws every draped line over the surface, as the contract asks: along
the surface's curve between its positions, in its colour where the surface
hides it, hidden past the horizon (tested along its arc, shown in 2D). A
segmented line runs from its first shown segment to its last, in its style
colour. A line whose positions hold what they held takes a new colour in
place, so pulsing jam lines build nothing per frame; one that moves is
built anew alone.
src/services/groundSnap.js and src/services/meshFloorSampler.js no longer
reach Cesium. Whether the surface has streamed comes from the globe port
(the snap waits for the 'tiles' and 'surface' settle kinds; the sampler
runs only with the globe hidden and 'surface' settled), the camera height
gate from camera.pose(), heights from the query port, and the maths from
src/geo/ellipsoid.js. The raw exclusion path is gone: callers see through
their own draw sets by id. Cockpit's ground probe names the tracked
contact's icon and model sets, which the flights and military layers keep
on its entity record (groundSets), instead of the tracked holder object.
Probing is unchanged: at the caller's point, up to eight readings per cell
about 17 m apart, a read answering from the nearest one.
The application operations entry is now Cesium-free: a viewer with no
renderer bound needs ./render/cesium/unbound loaded first. Tests that used
to get the adapter's factories through ground snapping load it themselves.