Coverage lines from KartaView's z13-14 JSON tiles (OSM ways with photos,
chained end to start), the photo nearest a clicked line, cones along its
sequence, and a viewer for flat photos and 360° panoramas (a small WebGL
equirectangular renderer, no new dependency) with ‹ › along the sequence.
Mapillary's camera-driven line coverage and sequence cones move to the
provider-neutral core (lineCoverage.js, sequenceCones.js) with the tile
fetch, zoom ladder, colours and pick prefixes injected; Mapillary keeps
thin wrappers and its tests pass unchanged.
KartaView quirks handled: api.kartaview.org (the documented
api.openstreetcam.org serves empty tiles), photo URLs that name storage1
for photos stored elsewhere, and a photo API that answers 429 to more than
about three requests at once (two in flight, retried with backoff).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Trim the doc text this PR adds (README, CHANGELOG, CURRENT-STATE,
KNOWN-ISSUES, SECURITY, DATA_SOURCES, .env.example, the CI job comment),
drop code comments that restate the code, cut design-note JSDoc to a line
or two, and drop review tags from test names. Comments only; no code
changes.
Also: README key count (seven keys, two metered), CURRENT-STATE's gate
paragraph (CI runs a production build with a dummy token), the stacked
doc above meshBoxInRange and the orphaned inMeshRange line in
coverage.js, and a duplicate ALPR row in DATA_SOURCES that a merge had
brought back.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
From gekh's review of db79027, each with a test that fails before:
- P2: image cones and the photo marker no longer disappear where the
ground lies below the WGS84 ellipsoid (NYC -22 m, Colombo -95 m). The
horizon cull's occluder is WGS84 shrunk by 1 km (HORIZON_CULL_DEPTH_M),
below any real surface, so a camera near or under the ellipsoid no
longer treats every lower point as behind the horizon; the far side of
the Earth is still hidden from orbit (tested).
- Mesh range across the date line: the camera's longitude is taken to the
box's side of +-180 before clamping (meshBoxInRange), so a tile just
across the line is not measured from its far edge.
- MapillaryJS no longer tracks window resizes (trackResize: false): the
panel's ResizeObserver resizes the viewer and skips it while hidden, so
a window resize after closing a photo cannot ask for a tile at z=NaN.
- A key-less install sends no tile requests before the key status is
known: coverage waits for the first status answer and the provider
refreshes it once the status lands.
- constructCatalog takes the source method list from MAPILLARY_SOURCE_
METHODS; sequences.js imports view.js once; the provider's unused
re-exports are gone.
Verified: unit 5970 pass; strict fixture gate on a production build 28 ok
+ 2 "no Google 3D" skips and the panel gate 6/6 (QA_FAIL_ON_RETRY=1);
live gate with a real token 25 ok + 3 fixture-only skips.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
From the IC8 review of #768, each with tests that fail before:
- P1: a mesh batch no longer rebuilds the selected sequence's cones. The
drawn cones are indexed by mesh cell; a batch that touches none of them
is ignored and the affected cones are moved in place (no removeAll/add).
- P2: mesh sampling keeps to its 6 ms slices. Requests are taken in inside
the budget, only cells within range of the camera are queued, the queue
is a persistent min-heap re-ranked in one pass only after a 100 m camera
move, and the deadline starts before any work. Coverage keeps a bounding
box per line and densifies a line only once it comes within range. On a
synthetic dense tile (600 x 40 points): slice median ~10 ms -> 5 ms, max
18-30 ms -> 6.7 ms, refresh cost 11-24 ms -> 1.5-3 ms.
- P2: image cones and the photo marker are horizon-culled like the
overview dots (one createHorizonCull in view.js, shared by all three).
- P2: a selection change recolours the previous zoom's lines still on
screen and the old lines a cast swap keeps showing.
- P2: distances (metresBetween), line densification and ground-corner
requests go the short way round +-180 deg (wrapLon in tileMath.js), so
nearest ordering, cone thinning, mesh range and cast lines are right
across the date line.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
From gekh's review of #768, each bug with a test that fails before:
- P2: a failed sequence load clears the previous sequence's cones, resets
the selection and can be retried; a second click while loading starts no
second lookup. sequences.js had no tests: sequences.test.mjs now covers
failure and retry, a superseded late answer, the cache and clearSelection.
- P2: closing a photo stops MapillaryJS sequence playback, which kept the
hidden viewer stepping and downloading images.
- openNearest without the panel reports it instead of loading forever, and
stops if the layer (or its provider) went off during the lookup; the
mesh sampler's misses are bounded and forgotten with its samples; the
sequence count is the union of ids across tiles; a provider withdraws
only its own error, so a sequence error cannot mask KEY REJECTED; hover
stays on (throttled) under an orbiting camera and re-picks when it
stops; "since N days" follows the clock in a long-open tab.
- A prewarm waits for one in flight and then builds if it gave up.
- New coverage for the layer core (credits, KEY REJECTED vs REQUIRED,
switching a provider off), the refresh wiring of the tilted-view fix and
the draped-to-cast swap completion.
- Cleanup: loading is derived from pending; freshStreet(); tile ranking
computes distances once and shares one path for the date line; shared
metresBetween / whenIdle / redrawTile; one NEAREST_RADIUS_M and one
source method list; unused contract fields, exports, getImage and the
decoder's image branch removed; PROVIDER_COLORS lists only Mapillary.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The raycast challenge on #768 showed bare-earth casting misplacing roads
that are not at grade: lines floated over freeways in trenches and steep
streets (rendered line pixels floating: Austin 8.5%, SF 27.1%, LA 43.8%),
because a ~111 m terrain grid cannot see a 30 m-wide cut or a slope between
its corners.
meshSampler.js samples the rendered Google 3D surface (scene.sampleHeight,
overlays excluded) once per ~11 m cell within 900 m of the camera, nearest
first, in idle time within a 6 ms budget; misses are retried, not latched.
groundCast.refineHeights blends it in, per point along a line:
- mesh up to 3 m above bare earth is the road: follow it, 1 m above;
- higher mesh (canopy, deck, roof): carry the road's offset from bare earth
across from the road samples on both sides (up to 8 points);
- otherwise bare earth + 2 m, as before.
Lines, cones and the marker use it; tiles touched by new samples are
redrawn one per idle slice with the no-blink swap.
Rendered line pixels on the surface / floating, before -> after:
Austin 90.0 -> 95.3% / 8.5 -> 0.7%; SF 69.0 -> 86.4% / 27.1 -> 9.1%;
LA 52.3 -> 91.0% / 43.8 -> 4.0%; Innsbruck 95.0 -> 95.7% / 0.2 -> 0.2%;
Sacramento 80.7 -> 79.3% / 3.8 -> 2.7%; buried lines stay under 1%.
Cones floating in SF 44 -> 5%, buried at LA 59 -> 28%. Main-thread long
tasks added during refinement: at most 134 ms (Austin, densest tile).
Roads on elevated decks are still drawn at ground level under the deck.
Unit tests cover the blend (trench, slope, canopy bridge, deck, bad probe),
the finer cast with meshAt, and the sampler (once per cell, nearest first,
overlays excluded, far cells skipped, misses not latched, idle when off).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
As more sources arrive, each one reads the same everywhere it appears: its
PROVIDERS chip, coverage lines, overview points, image cones and a single
legend swatch. The palette lives in one place, PROVIDER_COLORS in
src/layers/streetLevel/policy.js: Mapillary green (#05cb63), Panoramax
purple, Google Street View blue.
Mapillary drops its age dimming and magenta panoramas: lines and overview
points are Mapillary green, cones are green too and 360° images keep their
ring shape; the 360°/FLAT filter still separates them, and the selected
sequence stays GEV cyan.
The provider contract loses `legend`: `colors.coverage` is the source's one
colour, and the core composes the legend as one swatch per active source
(its name, its colour) followed by Selected. The chip group takes an
optional per-chip colour as a `--chip-color` CSS variable, written only
when it changes; Street Level chips show it as a swatch dot and, while on,
as the chip's border, text and a faint fill.
The feature gate checks the legend has one swatch per source plus Selected
and that the Mapillary chip carries #05cb63.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Draped ground polylines and clamped billboards land on the top of the
Google Photorealistic 3D mesh, so on a street under trees or an overpass
the coverage seemed to float at roof height.
At street zoom on Google 3D (camera below 1,400 m, back above 1,800 m)
the core switches to a `terrain` surface mode. groundCast.js samples the
existing terrain service on the ground-floor grid (0.001 deg), interpolates
bilinearly and adds 2 m; Mapillary lines become plain polylines at those
heights, and cones and the position marker stand on the street, so the
mesh hides what is behind buildings and trees. A tile draws draped first
and swaps to its cast lines once the heights arrive, keeping the old lines
until the new primitives are ready. Lookups are once per tile and aborted
when the tile is dropped; a geoid fallback counts as unknown and leaves
lines draped. Other map stacks and higher views are unchanged.
Providers get getSurface() and groundCaster in their context and an
optional setSurface(mode); getUIState() exposes `surface`. The QA gate
checks draped on Esri and terrain on Google 3D.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Street Level is now a provider-neutral layer modelled on the iD editor's
photo overlay. The core owns what every imagery provider shares: the
enable state and a switch per provider, the imagery filter (360°/flat and
captured-since in relative days), one click handler routed by pick prefix,
one viewer host that mounts whichever provider's viewer adapter owns the
open image, the position marker, camera follow, one on-globe credit per
active provider, and share-link parameters (one bit per provider plus the
filter). Providers implement the contract in registry.js: coverage,
sequences, nearest-image lookup and a viewer adapter emitting a common
pose. Mapillary is the only registered provider; Google Street View,
KartaView and Panoramax slot in beside it.
Panel: a PROVIDERS chip row (one chip per registered provider, keyless
chips read as errors), relative-day SINCE options, a provider-neutral
caption whose link label follows the provider, and no vendor mark in the
header. The panel inner is a rail scroller like CCTV's.
Tests cover the registry, params codec, filter, pick router, UI-state
composition, the provider definition and coverage-tile decoding; the QA
harness switches the provider off and on and checks the filter.
Co-Authored-By: Claude Fable 5.1 <[email protected]>
Pure move: the layer id, panel id, CSS prefix, classes, exports and config
paths become provider-neutral (street-level, #street-level-panel, sl-);
the Mapillary-specific modules move under providers/mapillary/. Behaviour
is unchanged. The two sprite collections now register under distinct ids
instead of overwriting each other under 'mapillary'.
Co-Authored-By: Claude Fable 5.1 <[email protected]>
