Two findings from PoBruno's Docker Engine on Linux run (#208), and one from
re-running the suite in the container after rebasing:
- The launcher pinned its own allowedHosts, including '.local'. Vite reads a
leading dot as a suffix match, so `Host: anything.local` reached the page and
the data proxies. Main has since moved the policy into build/allowedHosts.js,
which drops suffix entries on purpose and applies before the app's routes, so
the launcher's override is deleted rather than patched. As a side effect
GEV_ALLOWED_HOSTS now also works from `.env`, as it does under `npm run dev`.
- A checkout the container cannot write - typically a clone made as root on a
NAS or Proxmox host - made Save Keys answer 500 and never created .gev-cache,
with nothing logged. The launcher now warns at start, naming the owner, the
ids it runs as, and the two fixes.
- On Docker Desktop the bind-mounted repo always shows an owner other than the
container user, so git refuses it as "dubious ownership" and the tests that
shell out to git fail (src/data/bundledJson.test.mjs, new on main). The image
now marks /app, and only /app, as a safe directory.
Verified in a container on this base: `anything.local` 403 on the page and on
/api routes, localhost 200, GEV_ALLOWED_HOSTS honoured from the environment and
from .env, the warning on a root-owned /app run as 1000:1000, and
bundledJson.test.mjs 6/6.
Reported-by: PoBruno
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Docker delivers the host's own browser to the container from the container
network's gateway, never from 127.0.0.1, so the loopback-only admission gate
answered every POWER UP request with 403 and no key could be saved. The README
and CHANGELOG claimed otherwise; both are corrected here.
- keySetupCore: GEV_KEY_SETUP_TRUSTED_PEERS, an exact-address list (no
wildcards, prefixes or hostnames) admitted alongside loopback. Unset trusts
nothing, and the sharing, Host, Origin, Content-Type and proxy-header checks
all still apply to a listed address. Twelve assertions pin each refusal.
- scripts/docker-start.mjs: the container entry point, shaped after
scripts/pinokio-start.mjs. It reads the default gateway from /proc/net/route,
trusts exactly that address, and starts Vite. No gateway (--network none)
trusts nothing. The pure helpers are unit-tested and a contract test pins the
Dockerfile CMD and the loopback-only publish.
- Dockerfile: install git. `npm test` builds fixtures with `git init`, so the
suite failed 71 tests inside the image and the README's claim that it runs in
the container was wrong.
- SECURITY.md and .env.example document the setting and why it is safe only
behind a 127.0.0.1 publish; README gains the Linux/NAS id note and .dockerignore
drops macOS AppleDouble sidecars, both reported on the PR.
Verified in Docker on a clean build: saving a key from the panel writes the
bind-mounted .env (0600 in the container), it survives `compose down`/`up`, and
REMOVE comments it back out. A foreign Origin, a foreign Host, a proxy header
and a sibling container on the same network are each refused. `npm run doctor`,
`npm test` (5067 passed, 1 skipped, 0 failed) and `npm run build` are green
inside the container.
Reported-by: @jklaze
Co-Authored-By: Bogdan Petrut <[email protected]>
Co-Authored-By: Claude Opus 5 <[email protected]>
Review of #966: with a Google Maps key but no Mapillary token, switching
Street Level on read KEY REQUIRED / "Needs MAPILLARY_CLIENT_TOKEN" with
nothing about Street View, which stayed off (billing), so the layer looked
broken.
- While the switched-on providers lack their keys, the layer reports the
switched-off ones that would draw with a key already set
(keyAlternatives: Street View on Google 3D with a Google key). The
panel's KEY REQUIRED tooltip, its coverage line and the layer row's
tooltip then read "Needs MAPILLARY_CLIENT_TOKEN — add it in Provider
Settings, or light STREET VIEW to use your Google Maps key"
(keySetupWithAlternatives). Off Google 3D the plain KEY REQUIRED stays.
Street View stays off by default.
- OPEN STREET VIEW moves beside the coverage hint: at the default panel
width the PROVIDERS row has no room for it, so it wrapped onto a line of
its own.
- The panel gate's corner drag names what lay under the pointer when it
fails.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Doctor and dev-fresh told every user without an OpenAI key that voice could
use ChatGPT OAuth, whether or not Codex was installed. Say voice is off
until a key is added or a Codex sign-in is selected, and mark that path
experimental.
The login child inherited the whole server environment, including
OPENAI_API_KEY and every other provider credential. Pass only what Codex
needs to find its home, open a browser and reach OpenAI through a proxy.
Voice-card captions from main priced transcription usage into the API-key
dollar meter. In a ChatGPT OAuth session that could trip the $2 warning or
$5 cap while the readout said COST UNKNOWN. Count them with the session's
other OAuth usage instead.
Maintainer follow-up to #966 review:
- A failed panorama-details lookup now waits DETAILS_RETRY_COOLDOWN_MS
(5 s) per panorama before a view event can retry it, so dragging the
view after a failure no longer issues a lookup on every pov change. A
success clears the pause; one panorama's failure does not delay another.
- SECURITY.md notes that allowing maps.googleapis.com in script-src also
trusts its JSONP endpoints, an accepted limitation alongside the
existing 'unsafe-eval' allowance.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Resolve the source-pack conflicts with Statens vegvesen (keep both packs).
The Norway pack's 900 default pushed the per-pack defaults to 5,204, past
the 4,500 catalog cap this PR enforces, so raise DEFAULT_CCTV_MAX_SOURCES
to 5,500 and CCTV_MAX_SOURCES_CEILING to 6,000.
- OPEN STREET VIEW in the PROVIDERS row opens Street View's nearest
panorama at the ground under the middle of the screen, without moving
the camera: Street View no longer needs a pointer. It is disabled (and
says so) until the camera is at street zoom.
- Off the Google 3D map Street View does not appear at all: no chip,
legend swatch, globe credit, layer source or button, and Google's script
is not loaded (the viewer has no prewarm; the script loads on first use).
The share option keeps the user's choice for when Google 3D returns.
- A ground click measures the camera height at the click rather than
reading the cached flag.
- A chip without a usable key explains it instead of lighting; it darkens
beside a lit chip, and the other chips keep switching, so a refused
Street View key cannot lock Mapillary out.
- The gate checks that nothing of Street View shows off Google 3D even when
a share link switches it on, presses OPEN STREET VIEW on Google 3D, and
asserts that each chip it switches really switched.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Google's Maps Platform terms forbid Street View imagery beside non-Google
maps, so the provider declares requiresMapStack: 'photoreal': off Google
3D its chip is dashed with the reason, lookups and opens skip it, and
leaving Google 3D closes its panorama.
- Ground clicks: only a click on the map itself (scenePick.isSurfacePick:
nothing picked or Google 3D tile content) at street zoom opens Street
View, and the camera stays put; higher up the hint says to zoom in.
scenePick.pickGroundPosition replaces the copy in Directions.
- Viewer: poses go out at once and again when the date and address
arrive, so an open never hangs on that lookup; one lookup per panorama,
seeded by the nearest lookup; a close settles a pending open; failed
lookups are asked again; poses follow position changes, not pano_changed.
- Loader: the gm_authFailure handler is installed once, so a retried load
reports a refusal once.
- Viewer host: a prewarm that lands after another provider took the host
is released; FIT/FILL availability is set on every open.
- Provider: a refusal while switched off reports no error over another
photo; SINCE compares against the end of Google's month; messages name
the referrer and network causes; FLAT says Street View is 360° only.
- The layer row names the key of the providers that are on; the MCP panel
CSP admits Street View's tiles, control images and photos.
- Tests for each, against fakes that now follow Google's event order; the
browser gate restores its state, waits instead of sleeping, aims its
panel clicks and corner drags, and asserts the camera stays put.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Google Street View registers beside Mapillary as provider `google`. It runs
on the Maps JavaScript API with the browser GOOGLE_MAPS_API_KEY, loaded on
first use (mapsLoader.js), and uses Google's own StreetViewPanorama as its
viewer adapter, emitting provider-neutral poses (address and month in the
caption, a link to Google Maps, steps along Google's arrows, FOLLOW on
Google 3D). Its chip starts off because every panorama is billed to the
key; the share option is `g`.
Google offers no coverage layer for other maps, so the provider draws
none: with it on, a click on bare ground at street zoom opens its nearest
Google-collected outdoor panorama (groundClick.js). A key Google refuses
reads KEY REJECTED and fails a pending open at once; a lookup Google never
answers fails after 10 s.
Core: providers may declare `groundClick` and `defaultOn`; poses may carry
`capturedAtPrecision` and `title`; the coverage line keeps every
provider's hint; opening one provider's image releases another's
prewarmed viewer; FIT/FILL hides for viewers without render modes. CSP
script-src admits https://maps.googleapis.com. The browser gate gains two
Street View steps (the keyed one skips as 'no Google key' in CI).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Imported metadata stays inert: descriptions, native labels, properties and
KML extended data are dropped from every entity; names are kept as short
plain text. GeoJSON loads with a describe that builds no HTML, and
simplestyle (including marker-symbol) is dropped, so no icon asset is
fetched for a file and GeoJSON draws in its row's color.
- Bound geometry before loading: features and vertices are counted in the
parsed GeoJSON, the KML document and while reading GPX, and a file over
20,000 features or 250,000 vertices is refused before Cesium builds it.
- Imports run one batch at a time, so concurrent picks or drops cannot pass
the 12-file cap.
- Fly-to framing walks long tracks by index instead of spreading them into a
call.
- Fly-to is an immediate navigation through the application shell; the fly
after an import is a deferred navigation stamped when the batch starts and
re-asserted just before flying.
- Dated imports never change the shared clock: imported sources expose no
clock, entities are available for all time, and a KML gx:Track is drawn as
its line.
- GPX is read into GeoJSON with one line per track segment, without times.
- KML/KMZ rows show a hatched swatch (they keep their own styles); keyboard
focus is kept on the same control after hide/show and moves to the next
row after remove.
- Unit regressions for each, and the rendered QA now imports hostile
metadata, dated KML/GPX and a two-segment track, and fails on any request
for a file's contents or icon assets, a clock change, or surviving
metadata.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
viewer.flyTo frames ground-clamped billboards before the destination's
terrain has loaded, and their bounding sphere then sits kilometers below
the surface: flying to a points-only GeoJSON from another city left the
camera about 2.3 km underground (a black screen). Frame the features'
longitudes and latitudes at the surface instead, and let the existing
camera ground guard lift the eye once the terrain can be measured
(src/ui/flyToDataSource.js, with tests).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
DISPLAY ▸ Import (and drop onto the globe) puts the person's own files on
the map as Cesium data sources, clamped to the ground, one color per file,
with a row to show/hide, fly to or remove each. Files stay in the browser
for the session.
KML/KMZ are sanitized before Cesium reads them (network links, remote
icons/styles, models, photo/screen overlays and balloon HTML removed; KMZ
images served from blob URLs), so an imported file cannot make the page
fetch anything. KMZ is read with a small dependency-free zip reader on the
platform DecompressionStream, with a zip-bomb limit. Bounded file size,
entity count and number of files.
Tests: src/data/geoFileImport.test.mjs, src/ui/geoFileImport.test.mjs.
Gate: scripts/qa-geo-import.mjs. The import half of #890.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A tile whose terrain lookup cast some lines kept castRequested set, so a
later refresh skipped it and the lines that failed stayed draped over
trees and roofs until the tile was rebuilt. A refresh now retries any tile
with lines still draped, and redraws it only when more of its lines can be
cast, so a tile that cannot be cast fully costs a cache check, not a
rebuild, per refresh. castRequested still stops the redraw from casting
again at once.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Fixesbilawalsidhu/gods-eye-view#927. Each stdio MCP server made its own
random panel key, and panel_request accepts only the key in the panel
page. A client that starts two server processes for one connection and
reads the page from one while sending the page's requests to the other
(seen in Claude Desktop on Windows) therefore always got "Only the God's
Eye View panel may make this request".
The stdio entry now passes a key shared by the install, created once in
.gev-cache/mcp-panel-key. The file is staged 0600 and published with
link(), so processes starting together agree on one key and never read a
half-written one. If it cannot be stored, the process keeps a key of its
own, as before. createLocalMcpServer still makes a fresh key unless given
one, so in-process servers (the /mcp HTTP plugin, tests) are unchanged.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Meir Michanie