The CCTV layer kept every loaded camera live: each view change touched every
icon, every notification rebuilt every camera's state, and the picker listed
the whole catalog. With the default 4,000 cameras, a continental drag ran at
152-179 fps with 18-24 frames over 30 ms (worst 112 ms). It now runs at
235 fps with none. The layer now:
- shows icons only on or near the screen, and when zoomed out keeps one camera
per world-anchored cell (healthy feeds first), so panning keeps the same
cameras;
- grounds and draws coverage only for the cameras in view, the active camera
and its coverage neighbours, retrying a camera at most twice per view regime;
- reruns the view pass while the camera moves, paced by its own cost, and
projects with one matrix per pass instead of a Cesium call per camera;
- keeps the billboard buffer-usage hint fixed, so showing or hiding a few
icons no longer rewrites the vertex data of every billboard;
- lists the cameras in view (active camera first) in the picker, closing with
the count of cameras outside the view, and builds the full camera list in
the UI state only when it is read.
Conflicts in es, ru, zh-CN and zh-Hant catalogs: both sides appended keys
at the end (cyclone errors from this branch, routing refusals from main);
kept both.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Apply the accepted findings from the third three-model French review:
tool-name agreement (« Outil actif : {name} »), elision before ADS-B,
« GORGE AVAL », « CLASSIQUES », « EN SURVOL », one name for the VIIRS
daily overview, U+202F thousands separator, and wording fixes for the
scene editor, directions, radio tuner and status strings.
The CCTV HUD summary now shows its CAL badge, source kind and view band
through existing catalog entries, so French reads « CAL ESTIM. INITIALE ·
SRC AMONT · CONTEXTE RUE »; English output and unknown codes are
unchanged. presentation.js matches the pt branch's round-3 version byte
for byte, so the two branches merge cleanly.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Three-model review (astra, sol, fable), round 3: 17 of 18 findings
applied (some in own wording, one in part); "Missões espac." rejected.
- pt: layer cards «{label}: camada ativada/desativada», pointer and
Directions toasts name «A ferramenta "{owner}"», counters after a
colon where the count can be 1, traffic «sem dados de fluxo» and
«Fluxo: {percent}% cob», «limite de requisições atingido», FECHAR,
ANT., PREDEF. VISUAIS, quoted "Nível da rua", infinitive tooltips,
and more (see docs/translations/pt.md).
- CCTV summary line localizes its CAL, SRC and CONTEXT values through
existing catalog keys (all locales); codes stay underneath.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Catalog fixes from the second review round (squawk 7600/7700 names,
transit occupancy, radio category, cyclone advisory wording, Orbital Watch,
validation and hint texts), cockpit distances keep "km" in Japanese as in
Chinese, the CCTV context line uses the translated view band, and the
Japanese layer status line no longer splits "1分以内".
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- The trailing visibility frame uses the layer's injectable runtime timer and
is cancelled by resetState as well as disable and destroy.
- An empty-feed regular pass records the camera pose, so later in-cadence
frames do not keep scheduling trailing frames.
- New renderGovernor.test.mjs: a parked camera schedules nothing, a stopped
camera gets exactly one trailing frame and no self-wake, a forced pass
requests its frame, destroy cancels the timer.
- The CHANGELOG entry moves to changelog.d/871-vessels-idle-render.md; docs
say the hold also covers vessels dimmed under a live target.
The route proxy also refuses with 'routing busy — too many routes at once'
(429) and 'route proxy error'; both showed in English in every locale.
Mark them in ROUTING_REFUSALS and add es, ru, zh-CN and zh-Hant entries.
errorText is now cleared on a new connection, a mode switch and stop(), so
it never outlives the error it describes. Tests cover the two refusals,
'Routing failed: rate limited' (pattern order) and the stop() reset.
Three-model review (astra, sol, fable), round 2: 29 of 30 findings
applied, one of them in part.
- pt: FIRMS «mais recente há», CCTV «cruzamentos», degraded radio
directory, «{layers}: ativação recente» for any layer list, «Sem
imagem», NIVELADO, AJUSTA-SE, quoted Provider Settings, V/S kept on
the ADS-B card, no-break space in «(24 h)» / «(30 d)», and more
(see docs/translations/pt.md).
- Malformed cyclone snapshot is now a catalog message (all locales).
- Markup supports data-i18n-context; the radio STATION TAG option uses
"radio tag|All", so it no longer flips gender when the list loads.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Meaning fixes: playback connects to the broadcaster when it starts, browser
keys are restricted at the provider, clearing data layers switches them off
(ausschalten, not löschen), cockpit inputs are Quellen, Electronic is
Elektronische Musik, AIS types name vessels (SEGLER, LOTSENBOOT,
SANITÄTSDIENST, SCHNELLSCHIFF), contiguous US excludes Alaska/Hawaii,
wind and weather readings are model values, nearest frames are nearest in
time, cloud imagery and the brightness filter say what they are.
- NHC/CPHC advisories are Lageberichte, not Warnungen; cyclone strings use
Wirbelsturm throughout. Glossary updated.
- Grammar: " oder " keeps its space as a join separator, "{x} konnte nicht
sauber beendet werden", Then: no longer doubles Dann, scene save reasons
continue the sentence in lower case, neutral "Warten auf".
- Spacing between numbers and units in the remaining nine readouts.
- Reroute tooltip: German mode nouns keep their capital (Auto, Fahrrad).
- Built-in Nepal shot titles localize in every language: the legacy scene
upgrade rebuilds its base shots without sourcePackId, so the pack's own
shots in the scene now vouch for them.
- Layout: the layer status column no longer shrinks under a wide chip, and
a mixed-case compound (ALPR-Kameras) may break at its hyphen; only capital
codes (ADS-B, RTL-SDR) stay unbroken. WIRD AKTIVIERT overlapped the name.
The Bhote step meta line may take a third line.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Three-model review (astra, sol, fable): 51 of 52 findings applied, two
of them in part.
- pt: AQHI bands as health risk, NAVIO-TANQUE, CANDIDATO DO GOOGLE
PLACES, Provider Settings agreement, retry/feed-down wording,
NOTÍCIAS DA ÁREA (fits the briefing kicker), detection modes in the
masculine, GS and REC kept on the HUD, EXPORTAR PREDEF., prepositions
before times, and more (see docs/translations/pt.md).
- Cyclone request timeout is now a catalog message (all locales).
- Built-in Nepal base shots written by the legacy pack bootstrap now
show their localized titles: displayShotTitle also trusts the legacy
keyframes of an append pack the scene has applied.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Labels that ran out of their buttons: EXPORT / EXPORT A stay English
(EXPORTIEREN was cut to EXPORTI…), the imagery mode reads VGL. KARTE,
the scene run log PROTOKOLL (it broke as LAUFPROTOKOL/L), the dock voice
status SPRACHE N. V., and the Esri imagery note fits its line.
- The cyclone layer is Sturmwarnungen (no hyphenated break in the layer
list); Erdbeben (24 h) matches the other hour readouts; retry countdowns
get a space before s; the Mapillary hint names the Straßenebene layer.
- The cyclone source's timeout and malformed-snapshot errors were plain
English in every language: mark them like the wind source does and
translate them in de, es, ru, zh-CN and zh-Hant.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Register ja: CATALOGS, LOCALES, LOCALE_NAMES (日本語) and the package
boundaries; ja and ja-JP tags select it.
- Japanese unit words follow the number directly, as in the catalog:
formatQuantity writes 5分 and 1時間5分 (km and kt keep the space), and
formatRelativeTime drops the space CLDR puts in 5 分前.
- Tests: locale tags, picker order, Intl output, durations and the
ramp/exit/lane wording in Japanese.
- docs/translations/ja.md: style, units, plurals and glossary; ja added to
TRANSLATORS.md and CURRENT-STATE.md.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Once the TomTom tile budget is spent, or TomTom fails, the proxy serves
cached tiles marked STALE-BUDGET / STALE-ERROR. flowSource works out
`stale`, but the layer fetched flow through fetchFlowForBounds, which
returns only the segments, so getStats() and the sync chip still read
"LIVE · Roads: …". #1239 fixed the get_traffic_flow tool the same way; the
layer now uses fetchFlowDetail too, reports stale and oldestTileAt in its
stats, and the chip reads "STALE · Roads: <source> · Flow: cached TomTom
tiles". A source without fetchFlowDetail keeps the previous behaviour.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
When WFIGS was unreachable the proxy served its last snapshot, marked stale
(X-Data-Stale, body.stale), with no age limit, and the client source kept
only the rows. The layer then read healthy with a fresh update time and
get_fire_perimeters reported the perimeters as current; three days into an
outage it still said "1 mapped wildfire perimeter in the requested box."
The source now offers getSnapshotDetail ({rows, stale, fetchedAt}); the
layer reports stale with the snapshot's fetch time, the tool adds stale,
retrieved_at and "(data may be stale)", and the proxy serves a stale
snapshot for at most 24 hours, as the GNSS proxy caps its own.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* chore: remove four modules nothing in the app uses
src/app/sourceSlot.js re-exported src/sources/sourceSlot.js, which every
caller imports directly. src/data/flowTiles.js and src/data/issPass.js were
reached only by their own tests. src/data/localGeojson.js wrapped
localGeojsonCore.js with the app's services, which the catalog already
passes itself. The local GeoJSON layer tests now build layers the way the
catalog does, so they keep covering localGeojsonCore.js; only the test of
the wrapper's own default host goes. Boundary lists, format scope and docs
drop the removed paths.
* docs: changelog for #1403
The Contacts panel checked the raw meters against 1000 but printed them rounded, so 999.5 m or more read "1000 m". Compare the rounded meters so the distance moves to kilometres.
routeDistanceText checked the raw meters against 1000 but printed them rounded to tens, so 995 m or more read "1000 m". Compare the rounded value so it moves to kilometres.
routeDurationText checked the raw seconds against 60 but printed them rounded, so a leg of 59.5 s or more read "60 s". Compare the rounded seconds so it moves to minutes.
Sameh Khamis