A pivot range rebuilt from the camera's position came back a hair over the 1,000 km cutoff when the view sat exactly on it, so a tilt from 1,000 km ran in place and lifted the crosshair onto the sky. The cutoff now allows 1 m of slack.
A zoom during a tilt to an angle changes the range the pivot holds, and with it the place's horizon limit, but the tilt kept its old goal and its reply its old angle: from 400 km, a tilt to -5° zoomed out x2.5 reported -5° with no note and ended at -9.4°. The zoom now re-judges the goal at the new range, eases the tilt from where it is to it, and its result names the angle the tilt now ends at, with a note.
Gemini runs one turn's calls one after another. By the time "pan left" ran beside "fly to Xyzzyville", the lookup had already found nothing, so there was no flight to wait on and the pan moved the old view with ok: true. OpenAI's parallel calls refused the same reply.
The runner now remembers, for the latest reply that sent a voice fly-to, whether one moved the camera and whether one found nothing. A tilt, orbit, pan or rotate of that reply with no flight left to wait on is refused when its fly-to found nothing and none moved. The reply is Gemini's turn, passed as a per-turn reply object, or OpenAI's authorityGroup. A motion in a later reply, or beside a fly-to of the same reply that did land, runs as before.
A motion queued behind a voice fly-to checked only that its reply was current and that the user had not touched the map. A location-panel search, share link or file import stamps a deferred navigation without stopping the flight, so the flight landed, the motion took navigation, and the search's reassert then failed: the search was silently dropped while the camera kept orbiting.
The runner now counts camera handoffs from subscribeCameraHandoff, less the ones voice fly-tos make themselves, and each voice flight records that count when it starts. A motion whose flight saw another navigation since then is not run and says so. Voice fly-tos' own stamps do not count, so a later fly-to in the same reply, including a lookup that finds nothing, is still followed as before. The test harness now publishes handoffs and stamps its voice lookups, as the shell does.
- A tilt's angle, limits and "unchanged" check use the camera's own
pitch. At regional range the pivot pitch is up to about 8 degrees
shallower, so "tilt to 5 degrees" from 900 km ended at -12.9 degrees.
The swing now solves for the pivot pitch that gives the camera angle.
- A zoom out during a pivoting tilt stops at the 1,000 km pivot limit
instead of the orbit's 5,000 km, and a zoom in that reaches the
clearance is applied before the pivot ends.
- An angle the camera already holds still takes navigation, so it stops
a running motion and releases the follow camera.
- A motion queued behind a fly-to moves to a newer fly-to as soon as it
begins, so a stalled lookup no longer holds it past a flight that
landed. Wait listeners are removed when a wait ends, and a lookup that
found nothing points straight at the flight that moved.
- A fly-to that stops a running motion names it (stoppedMotion).
- A tilt left or right is refused, and the pitchDeg description says
steps use direction.
A new voice fly-to now records the last flight that moved as the one it replaced, landed or not; only a still-flying one passes on its manual-input count. A slow lookup cancelled by a direct flight that landed, followed by a lookup that found nothing, used to drop the queued motion, and a cancelled direct flight in the same place let it fall back to an older landing.
A motion queued behind a voice fly-to acts on the last flight that moved the camera. A later lookup that was not found, threw, or was cancelled once a newer voice fly-to had begun moved nothing, so the motion looks past it rather than refusing or running early and cancelling the flight still in the air. It never acts at a flight older than the one it started waiting on. A lookup cancelled while still the latest voice flight (a search, a share link, Cockpit) still refuses.
The top-down no-op now reports the camera's real pitch.
A motion queued behind a voice fly-to now follows a later fly-to in the same reply whether the earlier one arrived, was cancelled or failed. A geocode that loses navigation reports failed, so the motion used to be dropped; and a flight left flying while the next place is looked up could land and run the motion there, taking navigation and cancelling the newer flight. The deadline, abort and stale-reply checks still end the wait.
pitchDeg -90 or -89 from a top-down view is now unchanged rather than a 1° tilt up, and the tilt tests' pitch loops are bounded.
Re-pin the Realtime tool payload hash for the merged tree (voice geometry plus pitchDeg). To fit main's 55,500 prompt ceiling with Overpass on, the pitchDeg schema drops its -90..90 range (the runner already clamps to -89..-5, now pinned by a test) and its description is shorter. The Overpass prompt measures 55,492.
osm_query said "At least N" when the server capped its list, but handed
the places to the analyst engine with truncated:false, so "which of those
have emergency?" answered as if the list were whole. The handoff now
carries the cap and its caveat, and follow-ups (and their follow-ups)
stay incomplete with an unknown total.
A zoom in during a pivoting tilt stops at the range that keeps the camera 150 m above the pivot at its current pitch. A zoom that moves the range by less than half a metre (at the clearance, the 80 m floor or the 5,000 km cap) now answers not zoomed instead of ok, and a tilt reports tiltRangeAdjusted rather than orbitRadiusAdjusted.
- A motion waiting on a voice fly-to follows a later fly-to in the
same reply that cancels it, within one deadline, instead of
reporting that its flight did not arrive. A stale reply stops
following.
- The wait is 15 s, down from 30 s: it holds the tool output, and on
Gemini the later tools in the turn.
- Beyond 1,000 km of range a tilt happens in place instead of
swinging thousands of km about the crosshair point.
- The tilt-nudge limits read the pivot pitch the motion starts from,
including for a voice tilt from a tracked view, whose follow camera
is released before it moves.
- move_camera's argument checks run before the flight wait, so a
malformed call is refused at once.
- Tests: t.after cleanup in the fly-then-motion loop, the pitchDeg
pin asserts the field before removing it, and the handoff-order
pin follows the extracted argument checks.
- A zoom during a pivoting tilt now scales the range the tilt holds,
as it already did for orbit, instead of being undone on the next
frame while reporting success. The zoom limits no longer move a view
the wrong way: a zoom in leaves a view closer than 80 m in place, and
a zoom out leaves an orbit beyond 5,000 km where it is.
- A grab, touch or wheel on the map while a voice fly-to is in flight
drops the motion queued behind it. Cesium lands the flight anyway,
so the orbit or tilt would otherwise take the camera back. Chained
fly-tos in one reply keep the earliest snapshot.
- A pivot tilt toward the horizon stops lowering the camera at 150 m
above the pivot and tilts the rest in place, so a close view no
longer ends inside tiles or a hillside.
- pitchDeg is an absolute angle. A direction that contradicts it is
refused, judged from the pitch the swing starts at, and the tool
description says so.
osm_query handed its places to the analyst with no presentation, so "which of
those have emergency?" after "hospitals in Kathmandu" was answered as "anywhere
in the loaded data". The handoff now carries the scope the places were found
in ("inside Kathmandu" with its areaId, or "in view"), as an analyst count over
that area would.
"Fly to Paris and orbit it" reaches the app as two sibling tool calls,
which OpenAI runs at once. With a place that needs a lookup, the orbit
started over the old view and the late flight then replaced it; with a
known place, pan and rotate cancelled the flight already in the air.
Orbit, pan and rotate now wait for a pending voice flight the same way
tilt does: up to 30 s, and not run (saying so) if the flight is
cancelled, finds nothing or times out. Stop and rotate_globe do not
wait. Orbit keeps its own arming for flights the voice runner does not
track.
"Fly to London and tilt the camera" reaches the app as two sibling tool
calls, and OpenAI runs them concurrently. The tilt's navigation step
cancelled the flight already in the air, so the camera tilted where it
was; when the place still needed a lookup, the late flight replaced the
tilt and London came out top-down.
The voice runner now tracks its latest flight. A tilt sent while that
flight is still looking up or flying waits for it to land (up to 30 s),
then tilts at the destination. If the flight is cancelled, finds nothing
or times out, the tilt is not run and says so.
Picks up the Radio Next/Previous fix (#1474) and the Codespaces docs
(#1515). The one conflict is the Radio cycle assertion in
gevActions.test.mjs: main's new fallback flag is kept in this branch's
layout.
Both stack parents (#837, #842) are on main, so the voice geometry branch
now builds on main directly. Conflict resolutions keep main's behaviour and
add the geometry work on top: osm_query gating on every provider, restored
admin identity for Nominatim outlines, merged analyst follow-up memory, and
the cancelled Globe View reset instruction ahead of the generic cancellation.
Draw and Import used to be reachable by voice through DISPLAY. set_panel_open
now takes 'utilities-panel', and "utilities", "draw", "drawing" and "import"
reach it. This adds one value to the Realtime tool schema, so the pinned
payload digest, enum list and serialized length are re-derived with a note.
The show_data_layers_menu test now finds a row only inside the list that
really holds it, so dropping #utilities-toggles from the lookup fails it.
main moved the panels to Vue views and a one-open-panel rail, and removed
the two templates this branch edited. This merge carries the branch onto
that architecture; it adds no behaviour of its own beyond the port.
- The Utilities panel is a RailPanel in LayerPanelsView with its own rail
item (handyman). LayerPanel renders the Directions rows into its list with
LayerRows, and falls back to Data Layers without it.
- Draw leaves DisplayPanel for DrawControls, DrawMarkList and DrawSwatches,
which render what the draw tool publishes to the display store and call
its actions, as GeoImport does. drawMarks.js words the rows; the DOM-built
drawMarkList.js is gone. A row's fly-to is an immediate navigation like
Import's ('drawing' gets its Cockpit refusal), the name field keeps a
draft through v-field-value, and the colours are one radio group with a
single tab stop.
- UiSegmented draws an option's icon, named by its label, for the shape
buttons.
- The catalogs take main's languages with this branch's strings, Arabic
included, and the tests follow the views to their new homes.
main moved the Radio markup into Vue views and rebuilt the UI tests on
stores. Resolved:
- src/ui/templates/context.html: deleted in main; the new privacy note now
lives in src/ui/views/panels/RadioPanel.vue.
- src/ui/radioControls.test.mjs: main's store fixture; the Next/Previous
autoplay test drives store.act('cycleRadio').
- src/voice/gevRealtime.test.mjs: main's createTestVoiceUi; the stop and
select handoff cases stay one table-driven test.
- src/data/radioNextState.test.mjs reads the published gev-radio view.
- src/i18n/locales/ar.json: the new note translated for the Arabic locale.
A panel's collapsed, dock-pinned, dock-pinned-top, layout-auto-collapsed
and accordion-collapsed classes are drawn by its root's v-panel-state from
the gev-panel-chrome store. PanelChrome, its restore, the layout
controller, both rails and the side accordion present each panel's state
there instead of writing its classes; the rails call onCollapse(panel,
{collapsed, auto}). The directive applies a change in a synchronous
watcher, since the rails measure a panel in the task that opens or closes
it.
Destroying the chrome inside Cockpit now puts back the panels Cockpit's
entry closed while it can still present them. Without a shell, the voice
tools' set_panel_open reports that there is no panel to open. QA scripts
present the states they set instead of writing the classes.
initKeySetup keeps the setup requests, the ChatGPT OAuth flow, the pasted
field values and the dialog's keyboard, and publishes the POWER UP chip,
the dialog, its key rows and the status line to the gev-provider-settings
store. ProviderSettingsView renders them and sends clicks and typing to
the connected owner; in Cyber the chip is teleported into the top
toolbar. A successful save renders the rows afresh so no field keeps a
key, and the status line announces a repeated message again. The voice
action opens and closes the dialog through the same controls.
Review follow-ups for HAL-722. A Next or Previous that only selects a
station now leaves nothing of the previous stream behind:
- Selecting another station without playing stops a paused or failed
stream, so the panel, Stop, voice summaries and the audio element agree
on "stopped". A fallback the caller armed for the new selection is kept.
- A silent UI step arms no broadcaster fallback, and a user Play of the
selected station drops one left by a cancelled voice step. Voice steps
pass `fallback: true` because voice starts the prepared playback later.
- A user step to another station emits a `select` playback control, and
the realtime voice handoff treats it like Pause and Stop.
- A tuner release onto a station the directory no longer has stops the
stream the drag paused, publishing one state with the gesture's origin,
so the button reads PLAY and a voice handoff is cancelled.
- The transport buttons offer Pause while a stream connects, matching
what a click does.
- The privacy note names every action that connects to a broadcaster
(play, finishing tuning, choosing a station on the globe) in all
locales.
The Next/Previous layer tests live in src/data/radioNextState.test.mjs.
The CCTV layer kept every loaded camera live: each view change touched every
icon, every notification rebuilt every camera's state, and the picker listed
the whole catalog. With the default 4,000 cameras, a continental drag ran at
152-179 fps with 18-24 frames over 30 ms (worst 112 ms). It now runs at
235 fps with none. The layer now:
- shows icons only on or near the screen, and when zoomed out keeps one camera
per world-anchored cell (healthy feeds first), so panning keeps the same
cameras;
- grounds and draws coverage only for the cameras in view, the active camera
and its coverage neighbours, retrying a camera at most twice per view regime;
- reruns the view pass while the camera moves, paced by its own cost, and
projects with one matrix per pass instead of a Cesium call per camera;
- keeps the billboard buffer-usage hint fixed, so showing or hiding a few
icons no longer rewrites the vertex data of every billboard;
- lists the cameras in view (active camera first) in the picker, closing with
the count of cameras outside the view, and builds the full camera list in
the UI state only when it is read.
Voice show_data_layers_menu opens the panel that holds the row, so asking
for Directions opens UTILITIES and reports that panel, not a hidden row
under Data Layers. In Cockpit the panel stays with Directions alone, as
Data Layers does; only Draw and Import step aside there.
Draw's options sit flat under its name instead of keeping the card that
hung under a DISPLAY button, and its Shape label no longer takes DISPLAY's
label column in other languages. Cyber marks Draw on with its red edge.
LayerPanel routing, the voice panel choice, and the panel's order, mode
and phone-sheet CSS gain tests that fail on the earlier code. The form-field
and segmented-control gates open Utilities for Draw's controls, measuring
Scenes and Utilities in turn since the left rail fits one tall panel.
README, CONTRIBUTING, the PR template, CURRENT-STATE and comments now say
UTILITIES for Draw and Import and list the Audio group, and two files
outside the format scope lose an unrelated reflow.
- Keep the documented 72px / flex-grow 1 action sizing and the 360px
panel width; the larger type applies to the Authoring panel only, so
CCTV and Street Level buttons are unchanged.
- Scope the primary and file-row styles to the panel so Cyber's shared
button surface no longer overrides them.
- Shorten the scene PLAY in Spanish and Russian so it does not break
mid-word, and fix two translation inconsistencies.
- Map the spoken name "authoring" to the panel.
- Clear the has-shots marker when the controls are destroyed.
- Test the idle button states through published changes, the PLAY
translation context, and where the sharing row is placed.
Snow is no longer offered anywhere a style can be chosen: the Visual
Presets tray, keyboard shortcut 7, the Cockpit vision carousel, and the
set_visual_style voice action. The shader and its labels go with it;
weather snowfall and the SNOW weather condition are unaffected.
Share links keep working. Snow's enum code (6) stays reserved, so a
compact or long-form link that names it opens on Normal and drops the
Snow shader parameters without reporting them as unknown. A Scene
Director shot saved with Snow plays on Normal too. Snow's frozen share
defaults matched Normal's apart from those parameters, so no other
setting in an old link changes meaning.
The legacy voice-schema pins restore Snow before hashing, so the
unchanged pins still prove nothing else moved; the complete Realtime
payload digest is re-derived.
UTILITIES becomes its own panel in the left column, after Data Layers and
CCTV and above Scenes. The layer panel renders the Directions row into the
panel's list instead of Data Layers, and Draw and Import move there from
DISPLAY with their ids unchanged. Radio, the other row under the old
Utilities heading, stays in Data Layers under "Audio".
The panel collapses and remembers its state like the other left panels; share
links do not carry it. It hides in clean view, recording and Cockpit, takes
the Cyber left-rail treatment, and sits collapsed in the phone's Layers sheet.
Voice focuses the Directions row in its new list. The Directions, Draw,
Import and form-field gates open UTILITIES to reach their controls.
The HUD builds place context for its AI summary whenever the camera
settles, and each build paid for up to four reverse geocodes plus a Nearby
Places search, even when no OpenAI key was configured to use them.
- Ask GET /api/openai/hud-summary/status once; with no summary configured,
or after an unconfigured reply, make no place lookups for the page.
- Reverse-geocode at most two points: the view center and one viewport
point.
- Reuse a lookup until the view center moves a quarter of the visible
width, the camera's distance to it doubles or halves, or the camera
crosses a lookup height. The reused points are asked again, so only a
timeout, failure or empty answer spends.
- Repaint the last AI reply when a small pan leaves the context unchanged.
Cached-only hosts and voice context lookups are unchanged.
add the shared Voice Preview and Settings panel with browser-local preview
and inactivity preferences, keyboard controls and responsive positioning
preserve main’s Rotation and Context behavior, clarify panel routing and
refresh schema pins within the unchanged prompt limit
Drop module-local helpers that nothing calls (linkAbort, summarize,
stringOption, summarizeEntity and the polygonCenter, propertyObject and
unwrapProperties helpers only it used, CALLOUT_DOT_SIZE_PX) and unused
import specifiers in runtime modules, tests, QA scripts and tools.
None of the removed bindings is exported. Re-exports such as the ALPR
policy constants and every package export are unchanged.
Reuse one context/contacts/tracking owner in voice and World Packet. Compare voice outputs after stripping presentation fields; remove the unconsumed fingerprint API pending an actual caller. Document the exported packet boundary and reject null options safely.
Review guidance: asturksever on origin #880; Windows parity diagnosis by quanticsoul4772. Existing source ownership retained.
Reconcile #880 with current main. Delegate the view-state builder while keeping enabled-only layers, disabledLayerCount, provenance, context semantics, and existing voice behavior. Add parity and roster-read regressions; retain package export, boundaries and changelog fragment.
Preserve original GEV voice, layer and packet contributor credit.
- i18n scanner: lastError sink, no false sinks on defaults and ternaries
- shared src/i18n/marker.js for modules that only mark strings
- wind field messages move to wind/fields.js; CITY_POIS imports from cityPois.js
- drop review IDs, change history and stale references from comments and docs
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Fixes the 51 P0–P2 findings from the full review of the i18n branch and
the issues found while checking every new string on screen in ru and es.
- Translate errors and statuses that still reached ru/es in English:
feed and tile errors, provider statuses, the ALPR chip, the traffic
mode chip, voice plan step labels, fire feed values, receiver bands,
scene save reasons and the Cesium attribution link.
- Show preset city names in the UI language (src/ui/placeNames.js);
data and everything sent to the model stay English.
- Share layer names between the layer panel, HUD and voice card
(src/ui/layerNames.js).
- Keep long ru/es strings whole: voice card error lines, analyst
titles, the voice tier status, the Nepal evidence button, the ALPR
retry chip. English layout is unchanged.
- Ask before a language switch drops unsaved work.
- Catalog fixes: glossary terms (пуск, пресет), gender agreement and
consistent "peticiones" in es, fewer calques in both languages.
- Fix English text that was itself wrong (e.g. "Exit cockpit to fly to
a weather", raw tool ids in voice plan steps).
Catalogs: es/ru 2535 messages each, complete.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Conflicts resolved by keeping both sides: the Events group gains
gnss-integrity with a translated label, the cockpit aircraft line shows
main's transponder emergency through a localized formatter (cockpitMath.js
stays i18n-free, like the Context scope line), and the boundary lists keep
both the i18n modules and main's new data modules.
Main's new UI is translated into es and ru: the GNSS Integrity row, legend
and notes; geo file import (button, hints, list actions, every import
error, with numbers passed as placeholders); transponder status names.
Also formats kartaview/viewer.js so format:check passes.
Co-Authored-By: Claude Opus 5.5 <[email protected]>