When the whole feed backs off, no poll counts a miss, so the tracked
aircraft read STALE at full brightness while no newer position came in.
It now takes the same stale fade as a missed update, in the flights and
military layers.
The trail no longer joins a day of history into one line. It lifts the pen
across a gap of more than 48 minutes, an implied speed over 1,500 kt, or a
report without altitude (a parked aircraft within 0.1 nm for under 3 h stays
joined), and every history point is kept as its own segment. History never
gets an invented altitude. The live end is the path the aircraft was drawn
along, thinned to its shape, so it no longer cuts corners through turns; a
late report trims what was drawn after it. Old segments are frozen in chunks,
so a 2,000-point trail costs about 0.1 ms a frame.
A tracked aircraft that misses an update shows STALE and is dimmed. It keeps
flying on its last speed and heading for five minutes (at most 1,500 kt),
then stops, dimmed, labelled SIGNAL LOST with the time since its last report,
and is kept for ten minutes after that report so the camera keeps its target.
Aircraft on or near known ground hold at their last report instead of
coasting. Military flights follow the same rules.
The catalog source 'NASA FIRMS · LIVE' still led the row; getStats() now
names the source 'NASA FIRMS' for such a snapshot. get_active_fires says
"in the 24 hours to" its end and reports window_end. The end is checked
to be a printable time, cleared under KEY REQUIRED, the test moves next
to the layer, and the changelog and CURRENT-STATE describe it.
A FIRMS source may answer the 24 hours to a set time, naming its end as
`at` (epoch ms). The layer row then reads "24 h to MM-DD HH:MM UTC"
instead of "LIVE · updated ...", and getStats() reports `at`. A
snapshot without `at` (the trailing 24 hours to now, as the dev proxy
serves) keeps the LIVE label. Translated in every catalog.
Conflicts:
- docs/CURRENT-STATE.md: keep main's hidden-tab polling paragraph and the
display-text normalization paragraph.
- scripts/package-boundaries.json: keep main's voice panel and text chat
modules and add src/data/displayText.js.
- src/voice/gevActions.test.mjs: keep main's set_panel_open and partial
analyst card tests and the display-text tests.
Tracking a civil flight asks Planespotters for that aircraft's photo, once
per aircraft, straight from the browser. The CONTEXT panel's CONTACTS view
shows it under the flight's name with the photographer's credit, as a plain
link to the photo's page. Only images on plnspttrs.net and pages on
www.planespotters.net are ever shown or linked. Military aircraft and a
converted TR-3B are never looked up.
Flight lookups (type, route, photo) whose source failed temporarily are
asked again after a 60-second cool-down; an answer, found or not, and a
permanent refusal stay final for the session. A route belongs to the
callsign it was looked up for, so a callsign change drops the old route.
Browser QA scripts that track a flight answer the photo lookup themselves,
so they never call the third party.
With Lines on, every progressive paint of a loading city rebuilt all road
lines: up to three ground-line primitives for as many as 1,500 roads, built
asynchronously. Builds started faster than they finished, and each kept the
set it replaced in the scene until it was ready, so sets piled up.
One set now builds at a time. A rebuild asked for while lines are building
replaces the one waiting, and the newest starts when the build finishes.
Lines replaced by a finished build are removed before the next one starts.
Turning Lines off removes the lines at once and drops the waiting rebuild.
With readings kept per point, the floor a vehicle gets depends on which point
is probed and where it is read. Transit offered the sampler the first point of
each vehicle's path in a cell, usually its oldest fix there, so a vehicle that
stayed in one cell never had its current spot probed. It now offers the latest
point of the path in each cell, and the newest fix in the vehicle's own cell
(the selected vehicle's history is walked newest first).
The grounded-flight display clamp read the floor at its sticky cell's centre,
which now answers from the reading nearest the centre, not the contact. It
reads at the contact's own position, held inside the sticky cell so boundary
hysteresis still applies.
On the photoreal stack the rendered-mesh floor took one probe at each coarse
cell's centre (0.001 degrees) and kept it for the session. A centre on a roof
passed the +80 m DEM window and lifted every vehicle in the cell to roof height
(a Haymarket bus drew 23.5 m above the street, on the garage roof); a centre in
the river put Red Line trains on the Longfellow Bridge 6-9 m under the deck.
The sampler now probes at the caller's point. A cell with a reading is probed
again only at spots about 17 m apart from earlier ones, eight at most, and a
spot refused only because the cell's DEM prior was cold is tried again later.
The floor keeps each reading that passes the gate at the point it was taken
(two within about 5 m keep the lower; sixteen at most per cell) and answers a
read from the reading nearest the asked point, so a viaduct and the street
beside it in one cell keep their own heights.
- Prague PID: map route-id ranges from PID's GTFS (metro L991-993, S/R trains
L1000s/L1100s, P ferries L1800s, trolleybuses 50-59, X lines, funicular LD)
instead of 'below 100 is a tram, rest bus'.
- Bordeaux TBM: trams ride numbered ids 59-62/163/164 (A-F), boats 951-953;
the old letter match never fired.
- Rouen Astuce: TCAR:90 Metro as tram, TCAR:99 Calypso as ferry; Le Havre FUNI.
- Warsaw and Poznan: credit carries the data date (and Warsaw links its API),
as their terms require.
- data.gov.my feeds: CC BY 4.0, refreshMs 30 s to stay under 4 requests/min;
proxy honours per-feed refreshMs.
- Denver: quote the RTD agreement; tests use the feeds' real route ids.
getNearestPositions makes one bounded pass over the shown points, keeps the
nearest few in a short sorted list and reads latitude and longitude for
those alone, leaving out dense extras, asked-for ids and classes such as
debris. A caller that wants the nearest handful no longer builds and sorts
an entry for every satellite.
getById returns a loaded installation with its drawn position, as getNearby
does, without selecting it; findByPick resolves a scene pick (a named
marker's installationId or a site entity) the way the layer's own click
selection reads it. Both return null while the layer is off.
An imaging satellite with a known sensor can now zoom past 8x, up to 128x,
as far as the view stays at least as wide as the sensor's narrowest
standard swath at its live altitude; only swaths confirmed on a cited page
open those steps. The top step follows the altitude and window shape and
steps back when it falls below the zoom shown.
The view draws the sensor's swath to scale along the ground track with a
SENSOR SWATH readout (approximate off nadir), and a SENSOR button zooms to
exactly that width when it lies in range at nadir. From 16x the imagery
tiles the view will need 5 to 20 s ahead along the ground track are
pre-loaded at the matching level. The mouse wheel steps the zoom one notch
at a time, and the identity line shows how old the TLE is. The sensor
figures come from a new bundled pack of 46 Earth-observation platforms,
each value cited to its operator or agency, with its own data credit.
With a satellite tracked and no aircraft tracked, Cockpit can ride the
satellite. Entry needs only the Satellites layer; debris can be tracked but
not entered, and voice stays aircraft-only. Double-clicking the tracked
satellite or the entry buttons (reading ORBIT) enter it.
The camera sits on the satellite's per-frame SGP4 position and looks
straight down, turned to the ground track (north-up for a satellite with
none). The optical zoom steps 1x to 8x with a focus pull, the arrows tilt
the view up to 45 degrees off nadir, and Home or 0 returns to nadir. Off
nadir the tilt reads its total angle first and the swath readout becomes an
approximation marked with ≈. While in orbit the map leases flat Esri
imagery, the cloud pass stays off and the view opens in the optical style.
The orbital HUD names the satellite with its owner's flag (from the
flag-icons package, loaded per country) or an organisation badge, its
operator, class, NORAD and COSPAR ids and TLE epoch with the element lines
on request, altitude, orbital speed and the sub-satellite point. CURRENTLY
OVER names the country and its first-level division, or the sea, and from
8x the most prominent populated place nearby, looked up offline from the
bundled Natural Earth packs (populated places are a new pack). The
satellites layer hides the ridden satellite's own marks, dims the other
orbit rings and ignores scene clicks and Escape while held. Exit restores
the camera's field of view and the satellite's follow camera.
C no longer enters or leaves Cockpit, bridge or orbit: it is left to the
app-wide CCTV shortcut, and Escape or the exit button leave first person.
The orbital view reads a satellite's owner country, operator, COSPAR id,
TLE epoch and whether its class can be ridden. #1558 now carries only
what the class toggles read, so this brings the rest back here, where it
is first used: the classes.js helpers and the UCS pack's operator and
owner fields.
Class toggles only hid points: with Stations off the ISS's orbit ring and
its label still drew, and each catalog refresh showed the ring again. The
ring and label now follow the ISS's class, and the tracked card no longer
names a docked companion whose class is hidden.
A failed Starlink load reverted to the core catalog without applying class
visibility again, so the core catalog's own Starlink points stayed on while
the chip, legend and lists said Starlink was off, and classes.starlink kept
reading true. Both are put right on failure.
Deduplication kept only the first group's tag, so a recent imaging
satellite in both visual and resource, with no UCS record or known name,
fell to Probes. The catalog entry now keeps every group, and the
last-resort class is the first of them that names one.
SATCAT groups merged in group order, so a stale cached copy read later
overwrote a current record of the same object: a satellite SATCAT now
calls dead stayed in Imaging. A stale copy no longer overrules a current
read, from the same merge or an earlier one.
Only catalog and the tracked satellite were saved for the layer, so a class
chip lasted until the next reload and no share link carried it. The choice
is now the satellites option `classes`: one letter per class shown
(`sitpd` by default, `0` for none), with Starlink left to `catalog`, and
the layer takes the letters back through setParams. A partial request
(`{debris: false}`) hides only what it names.
Showing only Stations and Imaging by default hid GPS, GEO comsats, Hubble
and the rest of what the layer showed before classes, for every existing
user and saved view. Every class now starts on except Starlink, which stays
off as the DENSE switch was.
The satellites layer now sorts every object into Stations, Imaging,
Telecom, Starlink, Probes or Debris, each with a chip and a live count on
the layer row. Stations and Imaging show by default; the Starlink chip is
the former DENSE catalog switch. Hidden classes keep their points, so a
toggle needs no reload, and they leave the detection overlay and the voice
position lists.
A class comes, strongest evidence first, from CelesTrak SATCAT (object type
and status, served by a new /api/celestrak-satcat/<group> proxy route and
cached for a day), the bundled UCS Satellite Database pack (operator, owner
country and purpose), name patterns for later launches, and the CelesTrak
group. The core catalog also reads the resource, weather, planet, sar and
science groups. Payloads with no evidence of life launched 20 or more years
ago are filed as debris. The UCS pack, its build script and its data credit
are added.
The vessel layer draws other ships at their last AIS fix and does not
advance them, so dead-reckoning radar contacts moved the mismatch from own
ship to everyone else: a 15 kn ferry reported 90 s ago showed ~700 m ahead
of the ship out of the window. Own ship stays centred where the camera
rides; contacts go back to their last fixes, and the query drops the extra
reach and candidates (which could also cut the nearest ship in a crowd).
The sprite and card were hidden from the bridge but the selected-vessel
trail was not: at sea it ran astern from under the eye, and on a raised
river it lay buried under the water. It is now hidden while the bridge
holds its ship, keeping its history, and shown again on release.
The radar centred on the ship's last AIS fix while the camera rode that fix
dead-reckoned up to 180 s ahead: at 20 kn about a nautical mile apart, so a
ship already passed still showed ahead. Own ship now sits where the camera
rides and each contact is dead-reckoned to the same moment; the query reaches
past the range for ships that have since moved into it.
Ships with no MMSI each get a key of their own instead of all sharing an
empty one on the scope.