The transit, ALPR, vessel, CCTV and flight/military context fixes each
wrapped 359.5° to north with an inline Math.round(x) % 360. They now call
roundHeadingDegrees in src/data/headingDegrees.js, which also wraps negative
and multi-turn bearings. normalizeHeading moves there with it, and
cockpitMath re-exports it so existing imports keep working. It now adds a
turn only to a negative remainder, so a bearing just under half a degree
keeps its precision.
The awareness, Local ADS-B, cockpit wind, cockpit heading and Street Level
readouts use the same helper. The Cockpit's TRACK ACQUIRED signal rounded
without wrapping and could read COURSE 360°; it now uses
formatHeadingReadout, which shows --- for a track that is not finite.
The Street Level viewer caption rounded the photo's bearing without
wrapping, so a view facing 359.5° or more read "360°". The rounded
bearing now wraps to 0°.
- The selected sequence is drawn past the per-tile caps again, and its
highlight takes every loaded part, drawn or not: in a dense tile a
clicked Mapillary or Panoramax line kept its cones but lost its line.
- photoViewer tries :fullscreen and :popover-open one at a time, each in
its own try: Safari before 16.4 parses neither, and the fallback threw
on every flat KartaView or Panoramax photo.
- A lit Street View off Google 3D says it needs the Google 3D map again,
instead of "every provider is switched off".
- Chips carry their provider colour again (--chip-color, as on main).
Each comes with the test that reproduced it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Main gained three imagery providers (Google Street View, KartaView,
Panoramax), shared line-coverage, cone and photo-viewer modules, one source
lit at a time and the translated interface. Their shared modules still
carried what this branch removes, so the merge ports them onto it:
- lineCoverage.js is this branch's coverage.js made provider-neutral
(draped lines near the ground only, the selection drawn over them, key
and rate-limit blocking); sequenceCones.js is sequences.js the same way.
Mapillary, KartaView and Panoramax all build on them; Mapillary moves
back to providers/mapillary/ beside the others.
- No ground casting, mesh sampling, surface modes, FOLLOW, legend, prewarm,
orbit overview points (Panoramax's density dots included), stale-tile
swaps or water-filled point budget come back.
- Kept from main because the new providers need them: requiresMapStack and
attachMapStackController (Street View on Google 3D only), ground clicks,
openNearest with an optional provider nearestImage, openImage {frame},
reportError, the view-cone marker (now an SVG glyph), filters /
coverageLabel / sinceBasis, OPEN STREET VIEW, keyAlternatives and i18n.
- photoViewer.js treats the viewer as expanded when its wrap is full screen
or the iPhone popover, as EXPAND now is.
- The fixture browser gate keeps its 8 steps and adds one each for
KartaView and Panoramax; catalogs, docs, boundaries and format scope
follow.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- i18n scanner: lastError sink, no false sinks on defaults and ternaries
- shared src/i18n/marker.js for modules that only mark strings
- wind field messages move to wind/fields.js; CITY_POIS imports from cityPois.js
- drop review IDs, change history and stale references from comments and docs
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Panoramax's coverageLabel action is 'click a line for its nearest
photo' (like KartaView's) while it counts sequences, but the count-line
discriminator keyed only off the noun, so Panoramax fell through to the
default pair and promised 'its photos'. Discriminate on the action
first, then the noun, and add the sequences + nearest-photo pair
(KartaView keeps streets + nearest-photo; the default keeps sequences +
photos).
Conflicts:
- KartaView viewer moved into the shared photoViewer.js on main; its
labels now take the provider name ("{name} street-level photo") and
are translated there.
- Weather: main's cloud filter strength slider, with its labels in t().
- Street Level caption: translated creator line plus main's licence.
Panoramax status and error texts are marked like KartaView's, and
"Panoramax answered HTTP {status}" gets a template in the panel and the
layer row. Catalogs: es/ru 2553 messages each, complete.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Fixes the 51 P0–P2 findings from the full review of the i18n branch and
the issues found while checking every new string on screen in ru and es.
- Translate errors and statuses that still reached ru/es in English:
feed and tile errors, provider statuses, the ALPR chip, the traffic
mode chip, voice plan step labels, fire feed values, receiver bands,
scene save reasons and the Cesium attribution link.
- Show preset city names in the UI language (src/ui/placeNames.js);
data and everything sent to the model stay English.
- Share layer names between the layer panel, HUD and voice card
(src/ui/layerNames.js).
- Keep long ru/es strings whole: voice card error lines, analyst
titles, the voice tier status, the Nepal evidence button, the ALPR
retry chip. English layout is unchanged.
- Ask before a language switch drops unsaved work.
- Catalog fixes: glossary terms (пуск, пресет), gender agreement and
consistent "peticiones" in es, fewer calques in both languages.
- Fix English text that was itself wrong (e.g. "Exit cockpit to fly to
a weather", raw tool ids in voice plan steps).
Catalogs: es/ru 2535 messages each, complete.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
This branch moved twice at once: upstream merged KartaView (#1121, a
third keyless street-level provider sharing a new lineCoverage.js), and
the remote i18n-spanish gained the whole-interface translation work
(1993 catalog entries, translateKnown, data-i18n-runtime, the unmarked-
string detector in npm run i18n) built on the Street View merge.
Integration keeps the remote's mechanisms and re-adds KartaView on top:
- presentMeta: remote's translateHint for coverage hints, plus the
KartaView count line as its own literal tn pair (Russian plurals need
the noun inside the template; keyed off coverageLabel.noun with the
sequences pair as the default).
- uiState: upstream's highlightsSequence legend gate (KartaView's lines
do not highlight) with t('Selected').
- layer-panels.html: remote's data-i18n/data-i18n-runtime hooks plus the
sl-since-note wiring KartaView's upload-date SINCE note needs.
- kartaview viewer: the photo-navigation aria-label and img alt go
through t(), as the remote's unmarked-string detector requires.
- catalogs: remote's 1987-entry base (its refined keys supersede this
branch's earlier Street View wording) plus the KartaView entries:
coverage hints, the upload-date note, the streets count line (with
Russian one/few/many/other forms) and the viewer strings.
npm run i18n: complete, no unmarked strings. npm test: 6520/6522 (the
one failure is the pre-existing environmental OPENAI_API_KEY leak in
devFreshDotenv). Build passes.
Upstream's KartaView PR (#1121) extracted the Mapillary coverage engine
into a shared lineCoverage.js and made the panel wording
provider-specific (coverage noun/action, SINCE upload-date note,
highlightsSequence legend gate), again in the regions this branch
localizes.
- mapillary/coverage.js: taken as upstream's thin re-export of the new
lineCoverage.js; the generic too-high hint stays msg()-marked, now in
lineCoverage.js where the default lives.
- kartaview/policy.js: coverage hints (tooHigh, noCoverage) marked as
msg() data so they translate like every other coverage hint; thrown
error messages stay English, matching the Mapillary precedent.
- presentMeta: KartaView counts streets, and Russian plurals need the
noun inside the template, so the count line gets its own literal tn
pair keyed off coverageLabel.noun, falling back to the sequences pair;
upstream's noun/action data contract is untouched.
- uiState legend: upstream highlightsSequence gate with t('Selected');
sinceNote localized with a {names} placeholder.
- layer-panels.html: sl-since-note wiring kept, data-i18n hooks kept.
- CHANGELOG: both sides kept. es/ru: 4 new keys each.
npm run i18n complete (953 messages each); npm test 6504/6506 (the one
failure is the pre-existing environmental OPENAI_API_KEY leak in
devFreshDotenv, unrelated); build passes.
KartaView's later viewer changes are carried into the shared
photoViewer.js: the camera bearing (`bearingOf`), redrawing the same
photo after a GPU reset through `onReopen`, no pose while a lost context
recovers, the 2,560 px flat version only once the viewer outgrows
1,280 px, `refreshPose`, and one sharper-panorama load at a time with a
second look once it lands. Its tile cache's `keyOf` and `clear` move to
the shared tileCache.js. KartaView gets `onEscape` beside `onReopen`.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
KartaView's server filters by upload date only, so SINCE goes by it
throughout for KartaView: the lines (as before), the photo a click opens
and the cones, the cut-off taken as its UTC day as KartaView's startDate
(passesKartaViewFilter). Providers may declare sinceBasis: 'upload'
(validated); while one is lit the panel shows "KartaView: by upload date"
under the SINCE slider, read out with it. The gate checks the note, and
step 13's picks get 60 s on a loaded machine.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Panoramax, the open federated street-level commons, registers beside
Mapillary, Google Street View and KartaView. Its meta-catalogue
(api.panoramax.xyz) is keyless and CORS-open, so it runs in the browser:
- coverage from its vector tiles: sequence lines at z11–14 below 30 km
(longest first under the per-tile cap), and above that the grid layer's
density cells as binned points, not counted as sequences;
- a click on a line opens that sequence's picture nearest the click
(STAC search, any direction), without moving the camera, then any
sequence's if it has none within 50 m; the 360° and since filters go to
the lines and to the API;
- cones from the z15 tiles' pictures layer around the open picture
(~110 bytes a picture, against ~7.5 kB for a STAC item), re-centred when
a picture opens outside them; ‹ › follow the picture's prev/next links;
- the caption names the author (not an account named by an email
address) and the picture's licence (StreetPose `license`), and links to
the picture in the Panoramax viewer; the globe credits Panoramax.
KartaView's viewer becomes the shared photoViewer.js (flat <img>, 360° on
panorama.js, ‹ ›, keyboard, pinch, context loss), driven by a per-provider
PhotoSources table; the request limiter moves to limiter.js. Panoramax shows
the 2,048 px SD derivative and fetches the HD original only when the viewer
is wide enough, once, shrunk while it decodes (never above 8,192 px).
Orange #ff6f00 (Panoramax's own), off by default, share option
0.m.0_0.r.panoramax-1. The MCP panel allows the meta-catalogue and the
biggest instances. Tests: policy, decode, source, viewer, provider, and a
Panoramax fixture in the hermetic browser gate.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Coverage lines from KartaView's z13-14 JSON tiles (OSM ways with photos,
chained end to start), the photo nearest a clicked line, cones along its
sequence, and a viewer for flat photos and 360° panoramas (a small WebGL
equirectangular renderer, no new dependency) with ‹ › along the sequence.
Mapillary's camera-driven line coverage and sequence cones move to the
provider-neutral core (lineCoverage.js, sequenceCones.js) with the tile
fetch, zoom ladder, colours and pick prefixes injected; Mapillary keeps
thin wrappers and its tests pass unchanged.
KartaView quirks handled: api.kartaview.org (the documented
api.openstreetcam.org serves empty tiles), photo URLs that name storage1
for photos stored elsewhere, and a photo API that answers 429 to more than
about three requests at once (two in flight, retried with backoff).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The Street Level error line and its toasts showed provider errors as
thrown (Google's key-rejected message stayed English). They go through
translateKnown now. In a translation the coverage hint no longer shrinks
to a narrow column beside OPEN GOOGLE STREET VIEW: the button takes its
own line when both do not fit. English layout is unchanged.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Main added the Google Street View street-level provider and key guidance
that offers another source. Its new text goes through t()/msg() with ru
and es entries; the key guidance the panel shows is built in the UI
language by src/ui/keyGuidance.js, while keySetupCore.mjs keeps the
English sentences the server and AI tools use.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Upstream's Street View rework (second imagery provider, one source at a
time, OPEN STREET VIEW button, key-alternative guidance) rewrote exactly
the street-level regions this branch localizes.
Resolved as upstream logic + re-applied localization:
- keySetupCore: new unlock copy kept as msg() data; added
keySetupAlternativeKeyNames() returning machine values (registry key
names) so key-setup core stays English while presentation localizes.
- New src/ui/keyGuidance.js: localized key-guidance composer shared by
layerPanel and streetLevelPresentation (requirement sentence plus the
"or light X to use your Y key" alternatives tail, placeholders only).
- streetLevelPresentation: keyGuidance()/presentNearest()/presentMeta
relocalized (t/tn + formatNumber instead of toLocaleString);
renderModes and month-precision dates kept from upstream.
- layer-panels.html: upstream row ids, sl-meta-row and the new button
kept, data-i18n hooks re-applied (incl. OPEN STREET VIEW fallback).
- es/ru catalogs: 13 new keys, stale unlock key replaced in place.
npm run i18n: complete for es and ru. npm test: 6345/6347; the one
failure (devFreshDotenv provenance) also fails on plain upstream/main
and on the pre-merge tip here - this machine leaks OPENAI_API_KEY into
spawned children with a replaced env, so it is environmental.
- One provider is lit at a time: lighting a chip darkens the others, and a
chip click records every registered provider's switch in one update so
the share link keeps the swap (also off Google 3D, where Street View is
not listed). The layer starts with the first default-on provider
(Mapillary, free); params that light several keep the one already on,
so reapplying them never flips (litByParams). The now-unreachable
"several lit" chip paths are gone.
- Leaving Google 3D during a Street View lookup ends it without an error
or a stuck loading state (openImage's early return resets it; the
lookup loop rechecks availability).
- A source swap during a lookup no longer reports "no imagery".
- Street View lit off Google 3D says the panel needs the Google 3D map.
- Comments trimmed to the why; keySetupCore.test.mjs back to upstream's
formatting plus the one new test (was a 551-line reformat).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- The chip reads GOOGLE STREET VIEW (and its caption link likewise).
- Providers declare the imagery filters they honour (`filters`, default
pano + since). Street View declares none: every panorama is 360° and it
draws no coverage to thin, so its lookups ignore the filters and the
panel hides IMAGERY and SINCE while it is the only lit provider.
- The legend lists only providers that draw coverage lines, with
Selected only beside one: Street View alone shows no legend.
- Providers may pick their on-globe marker (`marker`); Street View's is a
Google-blue field-of-view cone from a white-ringed dot, in place of
GEV's amber pin, and switches back for a Mapillary photo.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
main grew the Street Level provider registry while this branch removed it
(#982–#985: injected providers, an empty composition, the `r` switch field).
The registry, params, uiState and pick router come back as main has them and
the slimmed layer sits behind the provider contract:
- The core (index.js) drives providers as on main, without surface modes,
ground casting, FOLLOW, prewarm and nearest-image lookups. A provider's key
status is asked with a 10 s timeout and asked again on a switch-on while no
key is known.
- Mapillary is mapillaryProvider.js over the slim coverage, sequences and
viewer modules, which read the filter and the active flag from the provider
context.
- The viewer host mounts one provider adapter at a time, no prewarm.
- The panel has a chip per provider again (the pill switches the layer);
no legend, EXPAND stays the Fullscreen API.
- The contract drops what no provider implements: groundCaster, meshSampler,
getSurface/setSurface, nearestImage, prewarm, reportError, the legend and
surface fields of the UI snapshot.
Co-Authored-By: Claude Fable 5.1 <[email protected]>
Both panels landed after the original string extraction, so they rendered
English in every locale. Mark their markup and runtime text (status, SINCE
stops, provider tooltips, coverage meta, viewer captions, draw hints and
colours), the layer-list names kept in PANEL_LABELS, and add 90 es and ru
entries. Street Level is «Уличные снимки» / «A pie de calle».
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Conflicts with upstream's Street Level provider composition and share-state
codec, resolved:
- Street View's switch moves from its own share option (`g`) to upstream's
provider-switch field (`r`, e.g. `0.r.google-1`); a link without it keeps
Street View off. Docs and the browser gate follow.
- createApplicationStreetLevel keeps upstream's injectable provider list;
its default, once the application supplies its Street Level source, is
Mapillary plus Google Street View. Without that source there are none, as
upstream intends.
- The coverage hint keeps upstream's empty-composition message and joins
every switched-on provider's hint otherwise.
- CHANGELOG, README and SECURITY keep both sides' entries.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Review of #966: with a Google Maps key but no Mapillary token, switching
Street Level on read KEY REQUIRED / "Needs MAPILLARY_CLIENT_TOKEN" with
nothing about Street View, which stayed off (billing), so the layer looked
broken.
- While the switched-on providers lack their keys, the layer reports the
switched-off ones that would draw with a key already set
(keyAlternatives: Street View on Google 3D with a Google key). The
panel's KEY REQUIRED tooltip, its coverage line and the layer row's
tooltip then read "Needs MAPILLARY_CLIENT_TOKEN — add it in Provider
Settings, or light STREET VIEW to use your Google Maps key"
(keySetupWithAlternatives). Off Google 3D the plain KEY REQUIRED stays.
Street View stays off by default.
- OPEN STREET VIEW moves beside the coverage hint: at the default panel
width the PROVIDERS row has no room for it, so it wrapped onto a line of
its own.
- The panel gate's corner drag names what lay under the pointer when it
fails.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- No pointer cursor over coverage lines (no other layer has one); a click
test replaces the hover tests.
- No legend: one source, one colour.
- The on-globe credit lives in index.js; credits.js is gone.
- Billboard glyphs are SVG data URLs with the same geometry, so tests need
no canvas stub.
- The tile cache keeps the 120 most recently used tiles, same 24 h TTL,
instead of a byte budget; listTileLayers was test-only.
- providers/mapillary/ is flattened into the layer and its policy merged
into one policy.js; the source's method list is a literal in the catalog.
- One fakeCesiumViewer for the layer tests.
- The fixture gate keeps the steps the unit tests do not cover: coverage and
credit, a rejected key, line -> cone -> photo, close, a keyless page.
Co-Authored-By: Claude Fable 5.1 <[email protected]>
- A failed or missing key status is asked again on the next switch-on, and
the check gives up after 10 s instead of holding LOADING forever.
- Waiting for the key status reads as LOADING while the layer is on.
- Esc shrinks the photo in full screen too, before the panel's own Esc.
- Destroying the panel with the iPhone popover open leaves no popover behind.
- An empty view says whether the filter emptied it.
- A freed upstream tile slot passes straight to the oldest waiter.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- visibleBbox: no view-rectangle fallback or grid option; its one caller
always ranges the rays
- tilesForBbox returns the tiles; normalizeBbox takes arrays only
- viewerHost: no try/catch around adapter calls that catch for themselves
- coverage: counts come from the drawn sequences; no sequenceCount export
- one keyStatusLabel for the pill and the layer list
- no constructor source check, double-init guard or selectSequence /
clearSequence on the layer
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- OPEN STREET VIEW in the PROVIDERS row opens Street View's nearest
panorama at the ground under the middle of the screen, without moving
the camera: Street View no longer needs a pointer. It is disabled (and
says so) until the camera is at street zoom.
- Off the Google 3D map Street View does not appear at all: no chip,
legend swatch, globe credit, layer source or button, and Google's script
is not loaded (the viewer has no prewarm; the script loads on first use).
The share option keeps the user's choice for when Google 3D returns.
- A ground click measures the camera height at the click rather than
reading the cached flag.
- A chip without a usable key explains it instead of lighting; it darkens
beside a lit chip, and the other chips keep switching, so a refused
Street View key cannot lock Mapillary out.
- The gate checks that nothing of Street View shows off Google 3D even when
a share link switches it on, presses OPEN STREET VIEW on Google 3D, and
asserts that each chip it switches really switched.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Google's Maps Platform terms forbid Street View imagery beside non-Google
maps, so the provider declares requiresMapStack: 'photoreal': off Google
3D its chip is dashed with the reason, lookups and opens skip it, and
leaving Google 3D closes its panorama.
- Ground clicks: only a click on the map itself (scenePick.isSurfacePick:
nothing picked or Google 3D tile content) at street zoom opens Street
View, and the camera stays put; higher up the hint says to zoom in.
scenePick.pickGroundPosition replaces the copy in Directions.
- Viewer: poses go out at once and again when the date and address
arrive, so an open never hangs on that lookup; one lookup per panorama,
seeded by the nearest lookup; a close settles a pending open; failed
lookups are asked again; poses follow position changes, not pano_changed.
- Loader: the gm_authFailure handler is installed once, so a retried load
reports a refusal once.
- Viewer host: a prewarm that lands after another provider took the host
is released; FIT/FILL availability is set on every open.
- Provider: a refusal while switched off reports no error over another
photo; SINCE compares against the end of Google's month; messages name
the referrer and network causes; FLAT says Street View is 360° only.
- The layer row names the key of the providers that are on; the MCP panel
CSP admits Street View's tiles, control images and photos.
- Tests for each, against fakes that now follow Google's event order; the
browser gate restores its state, waits instead of sleeping, aims its
panel clicks and corner drags, and asserts the camera stays put.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Google Street View registers beside Mapillary as provider `google`. It runs
on the Maps JavaScript API with the browser GOOGLE_MAPS_API_KEY, loaded on
first use (mapsLoader.js), and uses Google's own StreetViewPanorama as its
viewer adapter, emitting provider-neutral poses (address and month in the
caption, a link to Google Maps, steps along Google's arrows, FOLLOW on
Google 3D). Its chip starts off because every panorama is billed to the
key; the share option is `g`.
Google offers no coverage layer for other maps, so the provider draws
none: with it on, a click on bare ground at street zoom opens its nearest
Google-collected outdoor panorama (groundClick.js). A key Google refuses
reads KEY REJECTED and fails a pending open at once; a lookup Google never
answers fails after 10 s.
Core: providers may declare `groundClick` and `defaultOn`; poses may carry
`capturedAtPrecision` and `title`; the coverage line keeps every
provider's hint; opening one provider's image releases another's
prewarmed viewer; FIT/FILL hides for viewers without render modes. CSP
script-src admits https://maps.googleapis.com. The browser gate gains two
Street View steps (the keyed one skips as 'no Google key' in CI).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Three regressions from the slimming, found in review:
- Clean View, recording and the cockpit hid the old expanded viewer with
CSS; native fullscreen sits above all of that, so the photo stayed over the
globe (and in recordings). While expanded, the panel now watches the
<body> classes of those modes and leaves full screen when one starts.
- iPhone Safari has no element fullscreen, so EXPAND had disappeared there.
Where requestFullscreen is missing but popovers exist, EXPAND opens the
viewer as a top-layer popover sized to the viewport (it stays in the
panel's DOM; the popover attribute is set only while open, since a closed
popover is hidden). Checked in Chrome: the popover fills the viewport over
the panel's backdrop filter.
- Without the provider chips, a layer that was on with Mapillary switched off
by a share link or tool (`0.m.0`) showed ON and drew nothing. The pill now
reads OFF with a hint, and pressing it brings Mapillary back without
switching the layer off.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The layer now owns its Mapillary parts directly: the provider registry,
pick router, multi-provider UI summary, params codec helper and provider
context are gone. createStreetLevelLayer({ source }) builds coverage,
sequences, the nearest-image lookup and the MapillaryJS viewer itself; a
single providerOn switch keeps the share link's `mapillary` option (off
draws nothing), and getParams/setParams keep { mapillary, pano, sinceDays }.
No z0-5 overview points: above 60 km nothing is drawn and the panel says to
zoom in; the proxy now serves only coverage z11-14. Tiles come from the
visible ground within range of the camera, ranked from the ground under it
(no line-of-sight ranking or near-range padding). MapillaryJS loads on the
first photo; viewer prewarm is removed. Key status, a rejected key and a
rate limit share one `blocked` state on coverage.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
EXPAND now uses the browser's Fullscreen API on the viewer element, which
stays in the panel; the hand-built modal (re-parenting to <body>, inert
siblings, focus trap, document-level Esc/Tab, Clean View/recording/cockpit
hide rules) is gone. The button is hidden where the API is missing.
The FOLLOW button and the PROVIDERS chip row are removed. The header pill is
the only layer switch and re-enables a provider switched off elsewhere; under
KEY REQUIRED the error line says which key to add. Chip colour support in
chipGroup, dead CSS and tests pinning the removed behaviour go with them.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Trim the doc text this PR adds (README, CHANGELOG, CURRENT-STATE,
KNOWN-ISSUES, SECURITY, DATA_SOURCES, .env.example, the CI job comment),
drop code comments that restate the code, cut design-note JSDoc to a line
or two, and drop review tags from test names. Comments only; no code
changes.
Also: README key count (seven keys, two metered), CURRENT-STATE's gate
paragraph (CI runs a production build with a dummy token), the stacked
doc above meshBoxInRange and the orphaned inMeshRange line in
coverage.js, and a duplicate ALPR row in DATA_SOURCES that a merge had
brought back.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
From gekh's review of #768, each with a test that fails before:
- P2: the panel no longer reopens on every page load. The shell reports
who asked for Street Level to switch on; only a user, voice or tool
request (isExplicitLayerStateOrigin) or an opening photo opens it, and
those automatic opens are never stored. Without the hook, a stored or
shared "collapsed" choice wins during the restore window.
- P2: the expanded photo hides in Clean View, recording and the cockpit,
and holds neither Esc nor Tab while hidden.
- Esc/Tab are taken only from the viewer, body or globe, not app-wide;
FIT/FILL show the right choice while expanded; a 0x0 viewer is never
resized (no z=NaN tile request); the expanded viewer keeps the panel's
CSS tokens; KEY REQUIRED hides the raw "no_key" code.
- Share links carry the panel's collapsed state (ui token t); the Cyber
theme frames the panel like its rail peers (the pinned Cyber selector
tests now list it).
- Accessibility: radiogroups move with arrow keys and are one tab stop,
their focus ring is no longer clipped, and the provider chips sit
outside the disabled fieldset so the "how to add the key" hint stays
reachable (a gated chip explains instead of toggling).
- Renders write only changed attributes (the rail's MutationObserver
relaid out on every write); one coalesced resize per open; the legacy
render-mode key migration is gone.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Tilted views: the visible box came from screen rays against the bare
ellipsoid and the 9 tiles kept were the ones nearest its centre, so a view
over high ground (Denver, 1,600 m up) or near the horizon dropped the
streets in front of the camera. At street zooms the rays now meet an
ellipsoid raised to the ground under the camera, hits beyond a range tied
to camera height are ignored, tilted views also keep the ground around the
camera, and tiles are ranked along the line of sight (nadir to screen
centre). Simulated with real Cesium ray maths over Sacramento and Denver
from 2 m to 1,000 m: the nearest visible ground and the screen centre are
always loaded.
Rejected token: Mapillary's 401/403 reached the panel as a raw "Mapillary
tiles HTTP 403" while the pill said ON, and every pan asked Mapillary again.
The proxy now answers a refusal as {keyRejected: true} and holds it for that
token (5 min), and a 429 with its Retry-After (held until then). The panel
reads KEY REJECTED, names MAPILLARY_CLIENT_TOKEN and Provider Settings,
gates its controls like KEY REQUIRED, requests nothing more, and clears the
message when the layer goes off. A rate limit keeps the drawn tiles and
refreshes once the wait is over.
Found in the IC8 review of #768 (P1 tile selection, P2 rejected token).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
As more sources arrive, each one reads the same everywhere it appears: its
PROVIDERS chip, coverage lines, overview points, image cones and a single
legend swatch. The palette lives in one place, PROVIDER_COLORS in
src/layers/streetLevel/policy.js: Mapillary green (#05cb63), Panoramax
purple, Google Street View blue.
Mapillary drops its age dimming and magenta panoramas: lines and overview
points are Mapillary green, cones are green too and 360° images keep their
ring shape; the 360°/FLAT filter still separates them, and the selected
sequence stays GEV cyan.
The provider contract loses `legend`: `colors.coverage` is the source's one
colour, and the core composes the legend as one swatch per active source
(its name, its colour) followed by Selected. The chip group takes an
optional per-chip colour as a `--chip-color` CSS variable, written only
when it changes; Street Level chips show it as a swatch dot and, while on,
as the chip's border, text and a faint fill.
The feature gate checks the legend has one swatch per source plus Selected
and that the Mapillary chip carries #05cb63.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
FOLLOW puts the globe camera at eye height inside the street-level view; on
flat imagery or terrain there is nothing to stand among. The layer now takes
the application map stack controller (attachMapStackController), subscribes
to stack switches, offers FOLLOW only while the stack is 'photoreal', disables
the button with a MAP SOURCE hint elsewhere, and stops following when the
stack leaves Google 3D. Selection uninstall is a no-op when never installed.
The QA gate checks the disabled path and, when Google 3D is available, that
leaving it stops following; its caption-timeout dump now forces one render to
tell a missed update from a render fault.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- The viewer opens at the top of the panel, under the header, so the photo
is on screen without scrolling; its tools (EXPAND, FIT/FILL, FOLLOW, close)
sit in a bar above the image, clear of the provider's own overlays, and the
caption wraps instead of truncating.
- No separate ON/OFF or OPEN NEAREST PHOTO buttons: the header pill is the
layer switch, and a provider chip is lit only while the layer is on (the
last lit chip switches the layer off).
- SINCE is a stepped slider (any date to the last month) whose readout names
the cut-off date and is announced via aria-valuetext.
- The panel floats and resizes (portable spec); in a resized window the
viewer takes the spare height and only the settings scroll. SHRINK after
EXPAND, collapsing, or a header double-click docks it at its default size.
- FIT/FILL tooltips say what they do.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Street Level is now a provider-neutral layer modelled on the iD editor's
photo overlay. The core owns what every imagery provider shares: the
enable state and a switch per provider, the imagery filter (360°/flat and
captured-since in relative days), one click handler routed by pick prefix,
one viewer host that mounts whichever provider's viewer adapter owns the
open image, the position marker, camera follow, one on-globe credit per
active provider, and share-link parameters (one bit per provider plus the
filter). Providers implement the contract in registry.js: coverage,
sequences, nearest-image lookup and a viewer adapter emitting a common
pose. Mapillary is the only registered provider; Google Street View,
KartaView and Panoramax slot in beside it.
Panel: a PROVIDERS chip row (one chip per registered provider, keyless
chips read as errors), relative-day SINCE options, a provider-neutral
caption whose link label follows the provider, and no vendor mark in the
header. The panel inner is a rail scroller like CCTV's.
Tests cover the registry, params codec, filter, pick router, UI-state
composition, the provider definition and coverage-tile decoding; the QA
harness switches the provider off and on and checks the filter.
Co-Authored-By: Claude Fable 5.1 <[email protected]>
Pure move: the layer id, panel id, CSS prefix, classes, exports and config
paths become provider-neutral (street-level, #street-level-panel, sl-);
the Mapillary-specific modules move under providers/mapillary/. Behaviour
is unchanged. The two sprite collections now register under distinct ids
instead of overwriting each other under 'mapillary'.
Co-Authored-By: Claude Fable 5.1 <[email protected]>
