- A photo takes a deferred navigation ticket when it starts opening
(begin/reassert, the application's _beginDeferredNavigation and
_reassertNavigationHandoff) and frames only if that ticket still owns
the camera once loaded, so a slow photo no longer flies the camera back
over newer navigation or clears newer aircraft tracking.
- A failed mesh refresh keeps the last good sample and the distance it was
taken from, and is retried after the miss cooldown, instead of recording
the failed distance and never refreshing again.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Photo framing and FOLLOW claim the camera through the application's
navigation, injected with attachNavigation({ run, subscribeHandoff }):
aircraft and satellite tracking is released first, the cockpit refuses,
and FOLLOW stops when another feature takes the camera. No UI imports
in the layer.
- The mesh sampler follows the mesh floor's rules: it waits for the
visible tileset to finish streaming (visibleTilesetLoaded, now exposed
by the mesh floor service), needs a real bare-earth prior and keeps to
the shared meshFloorSampleWithinPrior window, which cameraFollow now
uses too. A cell is probed again once the camera is half as far from
it (down to 40 m), so a coarse early sample is replaced and redrawn.
- The MCP globe panel's CSP allows the Mapillary Graph API and its image
CDN (https://*.xx.fbcdn.net).
- The tile proxy reads bodies with the shared readResponseBytesCapped.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Trim the doc text this PR adds (README, CHANGELOG, CURRENT-STATE,
KNOWN-ISSUES, SECURITY, DATA_SOURCES, .env.example, the CI job comment),
drop code comments that restate the code, cut design-note JSDoc to a line
or two, and drop review tags from test names. Comments only; no code
changes.
Also: README key count (seven keys, two metered), CURRENT-STATE's gate
paragraph (CI runs a production build with a dummy token), the stacked
doc above meshBoxInRange and the orphaned inMeshRange line in
coverage.js, and a duplicate ALPR row in DATA_SOURCES that a merge had
brought back.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
From gekh's review of #768, each with a test that fails before:
- P2: the panel no longer reopens on every page load. The shell reports
who asked for Street Level to switch on; only a user, voice or tool
request (isExplicitLayerStateOrigin) or an opening photo opens it, and
those automatic opens are never stored. Without the hook, a stored or
shared "collapsed" choice wins during the restore window.
- P2: the expanded photo hides in Clean View, recording and the cockpit,
and holds neither Esc nor Tab while hidden.
- Esc/Tab are taken only from the viewer, body or globe, not app-wide;
FIT/FILL show the right choice while expanded; a 0x0 viewer is never
resized (no z=NaN tile request); the expanded viewer keeps the panel's
CSS tokens; KEY REQUIRED hides the raw "no_key" code.
- Share links carry the panel's collapsed state (ui token t); the Cyber
theme frames the panel like its rail peers (the pinned Cyber selector
tests now list it).
- Accessibility: radiogroups move with arrow keys and are one tab stop,
their focus ring is no longer clipped, and the provider chips sit
outside the disabled fieldset so the "how to add the key" hint stays
reachable (a gated chip explains instead of toggling).
- Renders write only changed attributes (the rail's MutationObserver
relaid out on every write); one coalesced resize per open; the legacy
render-mode key migration is gone.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
preserve Bilawal's merge history, OpenAI schema-combinator startup fix, and Contacts viewport note
keep the validated voice and analyst behavior while adopting the current provider-neutral feed routes and Google token fallback
The Street Level and panel gates never ran in CI, and the live gate needs a
Mapillary token, the Mapillary network and real coverage at its test site,
so everything users see was guarded only by manual runs (which a bad token
and expired tile caches blocked twice this week).
`qa-street-level.mjs --fixtures` (npm run qa:street-level:fixtures) answers
the page's /api/mapillary/status and coverage-tile requests from generated
tiles (a street grid with flat and 360 deg sequences, half captured three
years ago; overview points from orbit) and blocks mapillary.com. Only the
six steps that open a photo are skipped. Because the data is known, the 360
deg and SINCE steps also assert that the filters remove sequences, not just
that counts do not grow. A unit test pins the fixture contents.
New CI job "Street Level browser gate": install with headless Chrome, start
a key-less dev server, run the fixture gate and qa:panel-resize. Locally,
against a dev server with every key blanked: 14/14 on three consecutive
runs, panel gate all pass.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Norway's ~850 working road cameras load from one keyless GeoJSON request
to the agency's OGC API view of its DATEX 3.1 CCTV table, so no DATEX
account is needed. Faulty cameras are dropped, every camera sits under a
"Norway" category, and the ~135 that publish HLS play as live video
through the existing in-memory relay with the still as fallback. Frames
and manifests are pinned to each camera's own path on the agency hosts.
CCTV_VEGVESEN_ENABLED=0 disables the pack, CCTV_VEGVESEN_MAX_SOURCES
caps it (nearest the largest cities first) and CCTV_VEGVESEN_VIDEO=0
keeps stills only. Attributed under NLOD 2.0.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Keeps the voice-core prompt rules and adds main's world-query and
vessels-vs-visuals rules; the tool catalog wraps the deixis-aware runner.
Also fixes two things the branch had before the merge:
- Live voice could not start: OpenAI rejects track_entity's top-level
anyOf. Model-facing tools now omit top-level combinators; the runner
and benchmark still require a query or a referent.
- The Contacts-centred analyst answer dropped the viewport coverage note.
The flight, military and vessel feeds were named after the providers the
bundled server uses (/api/opensky, /api/adsblol/mil, /api/ais-live and
their track routes; createOpenSkySource, createAdsbLolSource,
createAisStreamSource). Any server should be able to answer a feed from
its own provider, so the feeds are now:
/api/flights /api/flights/track?icao24=
/api/military /api/military/track?hex=
/api/vessels /api/vessels/track?mmsi=
with createFlightSource, createMilitarySource and createVesselSource. The
old routes are removed. Each server names its provider in X-Feed-Source
(the bundled server sends OpenSky Network, adsb.lol and AISStream, so its
attribution is unchanged) and the military feed's cache state and age in
X-Feed-Cache and X-Feed-Age-Ms. Sources report the provider the server
names and fall back to the feed's name.
Brings in 123 commits from main, including the v0.2.0 and v0.2.1 releases
(MCP server and tool catalog, server security hardening, build hygiene).
Conflicts:
- package.json: kept main's script order and added this PR's
qa:panel-resize and qa:street-level; exports keep both sides (main's
tools/view entries and this PR's street-level and Mapillary entries).
- src/tooling/viteBuild.test.mjs: kept this PR's Mapillary-token define
assertion and main's new wildcard-host allowedHosts assertions.
- CHANGELOG.md: main now has release sections; this PR's entries go under
[Unreleased].
Checks after the merge: doctor, format:check, check:boundaries,
layer-token:check (28 published, 1 new: street-level 0), npm test (5726
pass), build, the Windows job's focused tests (70 pass), qa:panel-resize,
and the keyless street-level gate. The new CSP allows Mapillary (https:
connect/img, blob workers). The keyed gate stops at coverage locally
because the dev .env Mapillary token is invalid (upstream 403), not because
of the merge.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Resolve the CHANGELOG and CURRENT-STATE conflicts: the PR's entries go under
Unreleased, after the 0.2.0 release.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The OpenAI endpoints (/api/realtime/token, /api/openai/hud-summary) now
allow 30 requests per minute per client IP and the Google Places endpoints
120, the caps the Pinokio build already ships. GEV_RATELIMIT_OPENAI_PER_MIN
and GEV_RATELIMIT_GOOGLE_PER_MIN still override them and exactly 0 disables
them; an unreadable value falls back to the default rather than to
unlimited.
Salvaged from #683 onto current main.
Co-authored-by: Sameh Khamis <[email protected]>
Co-Authored-By: Claude Opus 5.5 (1M context) <[email protected]>
The /mcp route now applies the same proxy and sharing checks as Provider
Settings: requests carrying forwarding headers, or arriving while launcher
sharing is on, are refused. The Host must name the port the request reached
and a browser Origin must match that host exactly. The proxy and sharing
checks move into shared helpers in keySetupCore; Provider Settings behaves
as before.
Co-Authored-By: Claude Opus 5.5 (1M context) <[email protected]>
Embed-mode documents now keep the server's framing protection unless
GEV_EMBED_FRAME_ANCESTORS names the pages that may frame them (or * for any
page). The MCP Apps panel loads the app into its own page and needs no
framing. View answers are posted to the origin that sent the view rather
than to any origin.
Co-Authored-By: Claude Opus 5.5 (1M context) <[email protected]>
show_on_globe replaces open_in_gods_eye_view and names an MCP Apps view, a
ui:// panel that loads the app in embed mode and posts each later view to it,
so the globe in the conversation changes without reloading. It also takes a
view another answer returned. Tools can declare a UI resource, and the MCP
adapter serves resources/list and resources/read and lists each tool's
resource in _meta.ui.resourceUri.
keep contacts counts, rows, scope and provenance on one retained snapshot
report capped cohorts as lower bounds
separate sibling tool cancellation from newer user turns
align track_entity validation across runtime and benchmark paths
The raycast challenge on #768 showed bare-earth casting misplacing roads
that are not at grade: lines floated over freeways in trenches and steep
streets (rendered line pixels floating: Austin 8.5%, SF 27.1%, LA 43.8%),
because a ~111 m terrain grid cannot see a 30 m-wide cut or a slope between
its corners.
meshSampler.js samples the rendered Google 3D surface (scene.sampleHeight,
overlays excluded) once per ~11 m cell within 900 m of the camera, nearest
first, in idle time within a 6 ms budget; misses are retried, not latched.
groundCast.refineHeights blends it in, per point along a line:
- mesh up to 3 m above bare earth is the road: follow it, 1 m above;
- higher mesh (canopy, deck, roof): carry the road's offset from bare earth
across from the road samples on both sides (up to 8 points);
- otherwise bare earth + 2 m, as before.
Lines, cones and the marker use it; tiles touched by new samples are
redrawn one per idle slice with the no-blink swap.
Rendered line pixels on the surface / floating, before -> after:
Austin 90.0 -> 95.3% / 8.5 -> 0.7%; SF 69.0 -> 86.4% / 27.1 -> 9.1%;
LA 52.3 -> 91.0% / 43.8 -> 4.0%; Innsbruck 95.0 -> 95.7% / 0.2 -> 0.2%;
Sacramento 80.7 -> 79.3% / 3.8 -> 2.7%; buried lines stay under 1%.
Cones floating in SF 44 -> 5%, buried at LA 59 -> 28%. Main-thread long
tasks added during refinement: at most 134 ms (Austin, densest tile).
Roads on elevated decks are still drawn at ground level under the deck.
Unit tests cover the blend (trench, slope, canopy bridge, deck, bad probe),
the finer cast with meshAt, and the sampler (once per cell, nearest first,
overlays excluded, far cells skipped, misses not latched, idle when off).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Add find_alpr_cameras over the layer's OpenStreetMap camera extracts:
cameras in a US or Canadian area of at most 3° per side, nearest first,
with operator, manufacturer and facing direction, and the source's
attribution. Areas outside coverage or too wide are reported.
Add find_submarine_cables over the bundled TeleGeography data: cables
passing through or landing in an area, or matching a name, with landing
points and the dataset's attribution. The local MCP server's fetch reads
the bundled data files a browser would load by URL, and nothing outside
that directory.
Add get_recent_imagery. It searches the recent Harmonized Landsat and
Sentinel-2 catalog for an area, picks the image the layer would show
with the layer's own ranking, and returns it with its date, sensor and
cloud cover, falling back to the VIIRS daily overview.
Add get_weather_map, which returns the latest NOAA radar, satellite or
lightning map over an area as an image, choosing a window the image
route accepts and reporting areas outside the product's coverage, and
get_wind, which samples GFS or IFS wind at a location with the wind
layer's own grid sampling.
Mount the local MCP server at /mcp on the development and preview
servers for clients that connect by URL. The route accepts only
requests from this machine that name a loopback host and, when an
Origin is sent, come from a loopback origin, and drains oversized
bodies so the 413 response is delivered. The provider-order regression
test now pins the route between the providers and the API fallback.
Add open_in_gods_eye_view. It builds a version 2 share link looking
straight down on an area, with altitude chosen from the area's size, on
the app address the application supplies.
Add get_traffic_flow over the traffic source's TomTom flow tiles. It
reports average speed as a share of free-flow speed, congested and
closed road length, and a breakdown by road category, stepping down a
zoom level when an area needs more tiles than the source reads at once.
Add vessels_in_area, find_vessel and get_vessel_track over the live
vessel source, and a ships section in situation_brief. Without an AIS
key the source's own message reaches clients as an unavailable feed.
Add get_weather, get_regional_brief, get_cyclones, get_fire_perimeters,
get_terrain_height, find_military_installations and get_map_features
over the application request services and the layers' sources.
situation_brief combines weather, earthquakes, fires, aircraft and
cyclones for an area by reusing those tools, marking sections that are
unavailable instead of failing. get_hud_caption returns the app's
heads-up display caption for the same overview.
Add get_bike_share over the public GBFS systems and get_transit_vehicles
over the GTFS-Realtime feeds. Each finds the systems or feeds whose
coverage reaches the area, reads up to three, and reports any that were
unavailable instead of failing the whole answer. Transit results carry
each feed's attribution and license.
Add search_places and places_nearby over the app's Google Places routes,
and plan_route over its OpenStreetMap routing. The place search service
reports when no search key is configured, so an unconfigured server is
not mistaken for an empty result, and rate limits become retry_later.
Route endpoints accept a place name or coordinates.
Add aircraft_in_area, find_aircraft, get_aircraft_track and
get_aircraft_info over the live aircraft sources, with an optional
military feed, and next_satellite_pass and satellites_overhead over the
satellite catalog and the existing pass predictor.
Source failures from the live contract now become tool errors with the
matching code, so a rate limit reaches clients as retry_later with a
wait time. Tool schemas may use pattern.
Define tools that answer questions from the app's data once, independent
of the surface that exposes them. A tool declares its arguments and the
services it reads; applications compose tools with their own services and
optional call interceptors. Queries reuse the layers' portable source
factories, so they run wherever an application routes /api requests.
The first queries are get_earthquakes, get_active_fires and
get_recent_launches, with a shared area argument (place name, bounding
box, or point and radius) and capped lists.
gods-eye-view/tools/mcp adapts a catalog to the Model Context Protocol
with a small JSON-RPC handler and a stateless HTTP transport, adding no
dependencies. npm run mcp serves Core's tools over stdio to local clients
such as Claude Code, reading from a running app. Both exports are
portable and checked by check:boundaries; the app does not import them.
- Voice layer manifest (src/voice/layerManifest.js) generates the layer enums,
aliases and analyst field hints; a test fails when a catalog layer has no entry.
- analyst_query validates fields, operators, units, values and scopes, counts up
to 250,000 loaded records per layer, reports complete/partial/unanswered, tells
LAYER_OFF / NOT_READY / FEED_UNAVAILABLE apart from zero, refuses mismatched
follow-ups and never lets a superseded query replace follow-up memory. Seven
more layers expose analyst records.
- Tool results carry a code-built say line and a display card; the voice card in
the mic control shows captions, plan steps and the result
(src/voice/resultDisplay.js is the one adapter). Slow tools narrate their
current step out of band; holding Space while the assistant talks cuts it off.
Turn spans go to the debug log; caption transcription is metered; the log
omits what was said unless GEV_VOICE_LOG_CONTENT=1.
- Point and ask: the Space-down pointer snapshot resolves "this", "that one" and
"around here" through 'pointer' targets, and "the second one" through
referent:n from the last numbered list.
- Prompt states each policy once (instructions + tools 48.5k -> 46.7k chars).
- Voice benchmark harness (scripts/qa-voice-bench.mjs, scripts/voice-bench/)
shares its phrase table and grading with scripts/qa-voice-routing.mjs.
Traffic roads come from OpenFreeMap vector tiles, or TomTom flow tiles with a
key (Hybrid by default). Military areas use OpenFreeMap polygons with a bundled
worldwide name index; wide views show named points. ALPR reads an hourly
OpenStreetMap extract. Cockpit place context and country, state and US county
outlines use bundled Natural Earth and US Census data. Overpass is used only
when an operator configures their own endpoint.
Also: camera arrivals no longer land below ground, keyless terrain retries on
429, bounded relation geometry for configured Overpass, one shared
OpenStreetMap credit, and separate tile and API transports for embedders.
Co-authored-by: theGaryLarson <[email protected]>
Co-authored-by: Milan Khanal <[email protected]>
As more sources arrive, each one reads the same everywhere it appears: its
PROVIDERS chip, coverage lines, overview points, image cones and a single
legend swatch. The palette lives in one place, PROVIDER_COLORS in
src/layers/streetLevel/policy.js: Mapillary green (#05cb63), Panoramax
purple, Google Street View blue.
Mapillary drops its age dimming and magenta panoramas: lines and overview
points are Mapillary green, cones are green too and 360° images keep their
ring shape; the 360°/FLAT filter still separates them, and the selected
sequence stays GEV cyan.
The provider contract loses `legend`: `colors.coverage` is the source's one
colour, and the core composes the legend as one swatch per active source
(its name, its colour) followed by Selected. The chip group takes an
optional per-chip colour as a `--chip-color` CSS variable, written only
when it changes; Street Level chips show it as a swatch dot and, while on,
as the chip's border, text and a faint fill.
The feature gate checks the legend has one swatch per source plus Selected
and that the Mapillary chip carries #05cb63.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
fetchTile coalesced concurrent requests for one tile onto a single
upstream fetch, but that fetch ran on the first caller's signal. When the
first request was abandoned (an older pan), every joined request lost a
tile it still needed; and a joined caller that aborted stayed subscribed
until the shared fetch finished.
A flight now owns its AbortController and counts waiters, the pattern the
weather and wind providers use. Each caller's own abort rejects that caller
at once; the upstream fetch is cancelled only when the last waiter leaves,
and a later request after that starts a fresh fetch.
Regression tests (fail on the previous tiles.js, pass now): a joined
request survives the first caller aborting with one upstream request; a
joined caller that aborts leaves at once while the first still gets the
tile; both waiters leaving cancels the owned fetch.
Reported by kvnloo in review.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Brings in #744 (share-link token ledger). package.json: keep the branch's
sorted scripts and add layer-token:next and layer-token:check.
Street Level's token moves from the provisional `3` to `0`: following
CONTRIBUTING, the provisional entry was removed and
`npm run layer-token:next -- street-level` assigned `0` (free digits in
order). It is added to the registry and to
src/data/layerStateTokenReservations.json, and
`npm run layer-token:check -- --base-ref upstream/main` passes (28
published, 1 new). No link with the provisional token was ever published.
Pinned token tests move with the ledger as CONTRIBUTING asks: 29
reservations, next free digit `3`, and the competing-PR and retired-digit
scenarios shift up one free digit (0->3, 3->4) so they still test the same
rules. The README share examples and the free-digit notes in
CONTRIBUTING and CURRENT-STATE now read `0`.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Sameh Khamis