// src/data/geoid.test.mjs — EGM96 geoid-undulation lookup (docs/plans/2026-07-05-entity-height-datum-fix.md Task 1).
//
// Locks the module's public interface (later tasks — aircraft altitude
// correction, CCTV terrain fallback — call this verbatim):
//   ensureGeoidReady(): Promise<void>   lazy-loads the grid on first call
//   geoidHeight(latDeg, lonDeg): number N in metres; throws if not ready
//   orthometricToEllipsoidal(hMslM, latDeg, lonDeg): number  hMslM + N
//
// Tolerance is loose (±2.5 m) by design: the bundled grid is EGM96 while the
// plan's "Verified facts" reference values are Re:Earth's EGM2008 — the two
// models differ by up to ~1 m, and the brief's own tolerance absorbs that
// spread rather than asserting exact agreement.
import { test } from 'node:test';
import assert from 'node:assert/strict';
import {
  ellipsoidalToMslDisplayM,
  ensureGeoidReady,
  geoidHeight,
  orthometricToEllipsoidal,
} from './geoid.js';

const TOLERANCE_M = 2.5;

const LONDON = { lat: 51.5072, lon: -0.1275, nExpected: 46.1 };
const AUSTIN = { lat: 30.2672, lon: -97.7431, nExpected: -26.9 };
const SF = { lat: 37.7749, lon: -122.4194, nExpected: -32.2 };
const DENVER = { lat: 39.7392, lon: -104.9903, nExpected: -17.3 };
/** SFO runway 28R touchdown area — the cockpit/OSD field report's coordinates. */
const SFO = { lat: 37.616, lon: -122.368 };

test('geoidHeight throws before ensureGeoidReady() has resolved', () => {
  // A fresh, never-initialized module instance can't be observed from the
  // same process (ESM module cache), so this asserts the documented
  // contract via the type check further down instead of re-importing.
  // (See "ready-gate" test below for the real not-ready behavior.)
  assert.equal(typeof geoidHeight, 'function');
});

test('ensureGeoidReady() resolves and is idempotent (safe to call repeatedly)', async () => {
  await ensureGeoidReady();
  await ensureGeoidReady();
  await ensureGeoidReady();
});

test('geoidHeight matches known EGM96 undulation values within ±2.5 m', async () => {
  await ensureGeoidReady();
  for (const { lat, lon, nExpected } of [LONDON, AUSTIN, SF, DENVER]) {
    const n = geoidHeight(lat, lon);
    assert.ok(
      Math.abs(n - nExpected) <= TOLERANCE_M,
      `geoidHeight(${lat}, ${lon}) = ${n}, expected ≈ ${nExpected} (±${TOLERANCE_M})`
    );
  }
});

test('orthometricToEllipsoidal adds the geoid undulation to the MSL height', async () => {
  await ensureGeoidReady();
  const hMslM = 15;
  const hEllipsoidal = orthometricToEllipsoidal(hMslM, LONDON.lat, LONDON.lon);
  // London geoid ≈ +46.1 -> 15 + 46.1 = 61.1, expect ≈ 61 within tolerance.
  assert.ok(
    Math.abs(hEllipsoidal - 61) <= TOLERANCE_M,
    `orthometricToEllipsoidal(15, london) = ${hEllipsoidal}, expected ≈ 61 (±${TOLERANCE_M})`
  );
  // Must equal hMslM + geoidHeight exactly (same lookup, no extra fudge).
  const n = geoidHeight(LONDON.lat, LONDON.lon);
  assert.equal(hEllipsoidal, hMslM + n);
});

test('geoidHeight wraps longitude consistently (359.87 === -0.13)', async () => {
  await ensureGeoidReady();
  const wrapped = geoidHeight(51.5, 359.87);
  const normal = geoidHeight(51.5, -0.13);
  // Both longitudes name the same physical point (360° apart); the
  // underlying grid lookup takes different floating-point paths to get
  // there (mod-2π normalization), so equality is asserted to FP epsilon
  // rather than bit-for-bit — this is the "consistent," not "identical
  // bit pattern," invariant the brief calls for.
  assert.ok(
    Math.abs(wrapped - normal) < 1e-9,
    `geoidHeight(51.5, 359.87) = ${wrapped}, geoidHeight(51.5, -0.13) = ${normal}`
  );
});

// ── ellipsoidalToMslDisplayM — the ALT-readout datum correction ─────────────
//
// Field report (2026-08-22, cockpit parked at SFO): the camera OSD read
// "ALT: -15M" because Cesium's camera height is ELLIPSOIDAL and San Francisco
// sits ~32 m above the geoid's dip under the ellipsoid. Same family as the
// earlier JFK "ALT: -18M".

test('the SFO deck case: an ellipsoidal height equal to N reads as 0 m MSL', async () => {
  await ensureGeoidReady();
  const n = geoidHeight(SFO.lat, SFO.lon);
  // A camera sitting exactly ON the geoid reports h = N against the ellipsoid.
  assert.equal(ellipsoidalToMslDisplayM(n, n), 0);
});

test('the reported SFO cockpit OSD height turns into a small positive MSL number', async () => {
  await ensureGeoidReady();
  const n = geoidHeight(SFO.lat, SFO.lon);
  assert.ok(n < -25 && n > -40, `SFO undulation should be strongly negative, got ${n}`);
  // The owner's screenshot: ALT: -15m ellipsoidal over the SFO deck.
  const displayed = ellipsoidalToMslDisplayM(-15, n);
  assert.ok(
    displayed > 10 && displayed < 25,
    `-15 m ellipsoidal at SFO should read ≈ +17 m MSL, got ${displayed}`
  );
});

test('a positive undulation lowers the readout — the correction subtracts N', async () => {
  await ensureGeoidReady();
  const n = geoidHeight(LONDON.lat, LONDON.lon);
  assert.ok(n > 40, `London undulation should be strongly positive, got ${n}`);
  // Cruise case: 10 km ellipsoidal over London reads ~46 m LOWER as MSL.
  const cruise = ellipsoidalToMslDisplayM(10000, n);
  assert.equal(cruise, 10000 - n);
  assert.ok(
    cruise > 9950 && cruise < 9960,
    `10 000 m ellipsoidal over London should read ≈ 9954 m MSL, got ${cruise}`
  );
});

test('ellipsoidalToMslDisplayM round-trips orthometricToEllipsoidal', async () => {
  await ensureGeoidReady();
  for (const point of [LONDON, AUSTIN, SF, DENVER]) {
    const n = geoidHeight(point.lat, point.lon);
    const ellipsoidal = orthometricToEllipsoidal(120, point.lat, point.lon);
    // Exact to FP epsilon: +N then -N is the same lookup, no extra fudge.
    assert.ok(Math.abs(ellipsoidalToMslDisplayM(ellipsoidal, n) - 120) < 1e-9);
  }
});

test('an unavailable geoid returns the uncorrected height, never NaN or blank', () => {
  // Grid still loading, lazy import failed, or an out-of-range lookup: the
  // readout degrades to the ellipsoidal number rather than printing NaN.
  for (const missing of [null, undefined, Number.NaN, 'x']) {
    assert.equal(ellipsoidalToMslDisplayM(-15, missing), -15);
  }
});

test('a non-finite height is passed through untouched', async () => {
  await ensureGeoidReady();
  const n = geoidHeight(SFO.lat, SFO.lon);
  assert.equal(ellipsoidalToMslDisplayM(null, n), null);
  assert.equal(ellipsoidalToMslDisplayM(undefined, n), undefined);
  assert.ok(Number.isNaN(ellipsoidalToMslDisplayM(Number.NaN, n)));
});

test('geoidHeight throws a clear error if called before the grid is ready', async () => {
  // Exercise the not-ready path via a fresh dynamic import under Node's ESM
  // cache-busting query trick so this module instance has never had
  // ensureGeoidReady() called on it.
  const fresh = await import('./geoid.js?fresh-not-ready-check');
  assert.throws(() => fresh.geoidHeight(0, 0), /not ready|ensureGeoidReady/i);
});