A point of an arrow, route or area outside the view frustum was not
sampled and stood in at 0 m, so a partly visible arrow could hide, point
at the wrong place or vanish behind the eye. Such points are sampled again
within the 32-sample budget and the one-second retry, as on main; lone
points outside the view still skip sampling. The 0 m stand-in exceptions
are removed. Also from review: shared viewPlanes for transit and the
renderer, a −430..9000 m segment test against the view planes, tighter
tests and shorter docs.
- A clock correction starts a new epoch, and playback may first draw its
second report. The turn point now resets on a new epoch as well as on a
break, so a standing train no longer turns around after a correction.
- recallDirection and earlierFixes are gone: comparing each earlier report
with the newest turned a standing train on GPS jitter. A train bound when
its line arrives late shows no direction until it has moved 15 m.
- Tests share reportDirections, iconOf and the playback helper.
- Comments and CURRENT-STATE match the code.
- GPS jitter under 15 m at a standing train no longer turns it, in reports
and in playback; a reversal needs at least 15 m of movement.
- A standing train keeps its operator's last bearing through reports that
leave it out.
- Playback resets its turn point at a break, so a jump to a corrected
position is not a reversal.
- A train bound while its line is still loading takes its direction from
the movement it already made.
- A vehicle in view that leaves a Transit hold goes on from its own clock
instead of rewinding.
- Tests cover the 15 m boundary, the late line, the hold release and the
icon after Transit is turned back on; duplicate jitter tests are merged.
- FOLLOW_MIN_MOVE_M is gone; comments and CURRENT-STATE match the code.
- A train first seen standing takes its direction from the operator's
course, not from a course drawn out of GPS jitter.
- Moving a hold to another vehicle releases the first one the same way as
ending the hold.
- repaint always goes through placeSample, which hides the held vehicle and
puts it on its current segment, so setShown is no longer exported.
- Tests cover the icon right after a hold, a segment with one known floor,
a known floor at 0 m and selection by click after the layer comes back;
shared helpers replace repeated setup.
- Comments, CURRENT-STATE and the release note say what the code does
without internal figures.
Aircraft icons are one size; helicopters turn a three-frame rotor while
airborne or moving; ADS-B ground vehicles share one amber sprite and
stations/obstacles one mast; vessels get hull sprites by type and one buoy.
Going live keeps contacts until the first live answer and replaces them by
id; fast playback holds before the loaded positions end and prefetches
ahead. Cesium models move their parts from the optional model part state.
- A held vehicle's icon is hidden through the renderer (setShown, then
flushMarkers). The icon sets draw a marker only as last pushed, so the
direct marker.show write left a parked vehicle's icon drawn under the
view's eye.
- disable() ends the hold: turned off and on again, the vehicle shows and
clicks and Escape reach the layer.
- Far above the ground a vehicle with no floor is drawn on the ellipsoid.
Its snapshot now reports groundHeightM null there, as near the ground,
instead of -1.5 m.
- The uneven-ground test also checks the snapshot mid-segment, where a
blend of the two reports' floors would read about 55 m instead of 10 m.
- Scratch and marker positions are a Cesium-free Vec3 (src/geo/vector.js), so writing a coordinate does not allocate.
- The dirty set and the upsert lists are kept between frames instead of rebuilt; patchDrawnIcons reuses its lookup arrays.
- measureFrames and stopFrameProbe live in src/layers/transit/testing.js again.
- Tests: 3000 moving vehicles stay under 8 KiB per frame of layer allocation; moving 500 icons allocates under 256 B per upsert.
createApplicationCatalog takes an optional placement provider. Its
layer(kind) hands Flights, Military Flights, AIS Vessels, Transit and Rail
a place(id, wallMs), and optionally observe(id, fix) and forget(id). While
live, each layer tells it every fix it accepts and draws a contact where it
places it: position, height (the layer's own when none is given), course
and speed. A null answer, a provider that throws, a kind it leaves out, or
no provider at all keeps the layer's own motion unchanged, and following
the world clock the layers never ask it. A transit vehicle or train it
holds still lets the render loop idle and is asked again each second;
vessels ask for frames only while it places one, and stop when the layer
turns off.
Tests show the layers draw and reconcile exactly as before without a
provider and with one that places nothing, draw where a provider places
them, and idle while it holds them still.
The transit layer knew five modes, so a trolleybus drew as a bus, a
funicular as a train and a coach as a city bus. The GTFS basic route types
are now modes of their own (trolleybus, cable_tram, monorail, funicular,
aerial_lift), each with an icon, colour, detection tier, card word, voice
name, speed ceiling and fleet model.
A vehicle record may carry its route's GTFS route_type as routeType. It
settles the mode after the feed's fleet hint and before its route hint, and
picks the finer model (a coach for 200, a high-speed set for 101) when the
type is a kind of the vehicle's mode. Retained history classifies epochs
through transitModeFor too, so trails join the live vehicle.
Route hints from each operator's routes.txt: Prague's trolleybus lines
(51-59, 232, 275) and Petrin funicular, and the trams, trolleybuses and
metro lines of Bucharest, Cluj-Napoca and Turin. A feed may also name
route corrections that outrank the route type: Le Havre's routes.txt types
its funicular (8-FUNI) as a bus, so it is corrected to a funicular.
Brings in main up to f24abfc88: cockpit subject providers, the render
failure notice, aircraft drawn in their own mesh colours, airport ground
vehicles, and an aircraft with no ground track facing its true heading.
Under the seam:
- The render failure notice lives in the Cesium adapter
(src/render/cesium/renderFailure.js) and is the application hook
renderFailureNotice({allowReload, store}); its private Cesium fields
(Event's raise queue, the widget's render loop flag) are read through
internals.js. The inline panel's timer waits while the frame port reports
the loop stopped, and goes on after a Retry.
- Ordinary aircraft models draw white with the 'highlight' colour blend
through the draw port; tracked and emergency colours tint the mesh.
- Held trains and transit vehicles hide their route set and markers through
the draw port; the fleet model test fakes answer loads through the fake
draw port instead of Cesium's glTF loader.
- The Cockpit's subject view follows and places the camera through the
camera port.
Aircraft, military, local ADS-B, vessel, transit and rail models come from
the fleet model set, loaded up front and drawn life size through the draw
port's models sets; no layer touches the viewer or Cesium outside
src/render/cesium/. The models capability gains glTF bytes (gltf), a
per-axis stretch (axisScale), a colour for tinted parts (maskColor) and a
cut below the origin (clip: 'belowOrigin'), with conformance checks.
Main's rail layer and Data Library are ported to the ports; the CCTV
footprint probe keeps the globe-terrain clamp through the query port.
The fleet models (#1714) draw nearby trains and vehicles under the 3D toggle. A
held one now leaves out its model as it does its icon, as the Vessels layer does
for its bridge subject: its model item is hidden, and handing the visual back
to its icon keeps the icon hidden while held. Tests drive each layer with the
real fleet-model layer and a stubbed glTF loader; both fail without the fix.
- a vehicle drawn as a model keeps its selected card and stays in the detection overlay
- transit and rail models drop the 1.5 m floor lift their icons carry
- vessel models are clipped below the waterline
- models switch to an unlit white look under NVG/FLIR and back
- unknown transit modes keep their icon
- aircraft model specs are cached per set; no key-array copies per frame
Vessels, Transit and Rail turn nearby icons into fleet models at the
aircraft layers' distances. A vessel is drawn at its AIS length and beam
(static dimensions now reach vessel rows), standing at the sea surface; a
transit vehicle or train stands on its road or rail, raised by its type's
elevation, and is painted in its mode or category colour where the model
marks it.
GEV itself registers no new subject: with no provider, the Cockpit offers
aircraft, satellites and vessels as before, except that the most recently
selected of them now wins entry.
- services.cockpitSubjects: providers ({kind, layerId, entryFace, priority,
isEntryAllowed, read, hold, release, hud}) are checked once by the
coordinator; frames and HUD views on every update; a throwing provider
ends its view or keeps the last HUD.
- Entry: the most recently selected subject wins, across all kinds.
- Camera: a frame may turn the ground clamp off, anchor exactly on the
subject and update every frame.
- A generic HUD: kicker, title, cards, always-visible source rows, banner,
a veil with light streaks (off under reduced motion) and a bottom
progress line whose close ticks merge.
- Text comes from the provider, already in the page's language
(./i18n/locale: getLocale, onLocaleChange).
- Rail and Transit read and hold APIs (getSelectedTrain/Vehicle,
getCockpitSubject, setCockpitSubject, focusTrain/Vehicle); a held
train's marker, card and route line are hidden, and its feed keeps
polling while held.
- ./layers/rail/paths is exported.
Its last turn was kept when it came back into view, so a vehicle that
left the view while the camera moved, and came back after the pass for
the camera's new pose, kept the turn from the old pose until the camera
moved again. Coming back into view now clears its last turn.
The rotation pass reprojected courses only when the camera moved, a poll
marked a course, or a vehicle was moving. A vehicle that entered the view
or was shown on a later visibility sweep (its ground height arriving
after its poll) kept the icon pointing up until one of those happened,
under a camera that held still. The visibility sweep now marks the
rotations for the next pass when it changes what is in view or shown.
Upstream's layers and changes are carried onto the ports, with no Cesium
outside src/render and no reach into the viewer:
- Shipwrecks draw as one icon set, clicked through the input dispatcher.
- News draws through draw sets, the camera port and the input dispatcher;
its beacons pulse each frame through the frame port.
- The scene occlusion probe moves into src/render/cesium and reaches
detection through a new application hook, createOcclusionProbe; its
private Cesium reads go through internals.js.
- Flight and military trails, the stale and SIGNAL LOST cue, coasting and
following the world clock run on the draw and frame ports. GPU icons
follow the scene clock while the world clock is followed, and fade when
stale. A report that holds is not planned again every tick.
- Vessels are keyed by their record id.
The stub boot now enables military, shipwrecks and news as well.
Brings in the CCTV opening camera, the Iceland, Giroc HLS, Taiwan, Quebec,
Ottawa and world camera packs, the world clock and timeline, the zoom-out
limit and registered-only layer state, ported onto the renderer contract:
the sky follows the world time through the frame port's setTime in
preUpdate, the Quebec overlay reads the eye, projects and redraws through
the camera, query and frame ports, launches hide pending missions through
their draw records, and mission orbit rings turn on the scene clock.
Each sprite layer's icon or dot set is now made at a draw order taken
from SPRITE_LAYER_ORDER through the renderer's per-set drawOrder:
flights over military, vessels, directions, transit, bikeshare, FIRMS
and CCTV, whichever layer was turned on first. Picks name the topmost
first. The orders are negative, so selection highlights, route
endpoints, the tracked plane and every other set at the default order
still draw over all sprite layers, as they did before.
The raise-to-top restorer, the sprite registry and the primitive-name
lookups are gone, which takes spriteOrder.js off the viewer-access list.
Before, the restorer raised the layers to the bottom of the scene in the
order they were enabled, so flights usually ended up under the others.
Transit drew its vehicles into two Cesium billboard collections and culled,
turned and floored them through the Cesium scene. It now draws them as two
draw-port icon sets, still and moving, registered with the sprite order by
set id in the same places. Each marker is a plain record; a frame writes the
changed ones in one upsert per set, and markers taken out in one task go in
one removal. Clicks read the draw-port hit.
Visibility uses the query port's horizon test and the frustum planes of the
camera port's pose. Icons stay turned in screen space by an exact projection
through the query port, the same answer the Cesium helper gave. The flat
globe is told from terrain by asking the height service once per surface
change; floors are read again when the answer flips. The mesh floor sampler
sees through the layer's sets by id. The camera pose and surface version are
read once per task.
The Cesium draw port now moves and turns an icon without restyling it. The
GL upload probe moves to src/render/cesium/uploadProbe.js, which the QA
scripts hand to the frame probe; the QA scripts read the billboards drawn for
each set.
Transit lowered the one camera-change threshold every listener shared to
0.05, through a claim ledger. The camera port measures each listener
against its own threshold, so Transit now asks for 0.05 on its own port
listener, nobody else's trigger changes, and the ledger goes.
A new listener measures from the view at the next tick, so the layer looks
at the view once more after that tick, and a move made in between is not
missed. Disable always removes both subscriptions.
The billboards, the occluder and frustum checks and the frame probe still
drive Cesium, so the renderer stays on the Cesium list.
screenProjectedRotation, perspectiveProjectedRotation, horizonOccluder and
cameraPoseSignature read a Cesium scene or camera, so they move unchanged
to src/render/cesium/iconOrientation.js, where the CCTV, radio and transit
rendering (still Cesium-bound) load them. src/data/iconOrientation.js keeps
the label backdrop test and the rotation deadband, and leaves the Cesium
allow-list. Local ADS-B computes its rotation from the camera port's axes
with courseScreenRotation directly, the same answer without a stand-in
scene.
The ./aircraft package entry re-exports src/data/iconOrientation.js, so it
no longer carries the four moved helpers or the PERSPECTIVE_* constants.
The transit rendering part now owns everything that drives Cesium: the two
billboard collections (made, shown, cleared and removed in the same order
as before), the camera change listener and its sensitivity claim, the
preRender hookup, the camera height and subpoint reads, the globe-shown
and flat-terrain check, the mesh floor sampler call that sees through the
billboards, and the frame-measuring QA probe. The camera factory import
moves there too.
The height part asks the terrain under a vehicle through the queries
gateway (heightsOf over the query port) instead of the Cesium height
service; the Cesium query port answers it from the same loaded globe
tiles. The QA fixture paths are built with the shared ellipsoid helper,
which gives the same coordinates.
The transit tests bind a query port that reads the fake globe, and a new
test covers the hidden, terrain and flat globe answers. Height, lifecycle
and testing no longer import Cesium or drive the viewer, so they leave the
allow-list.
At the ~20 px the fleet renders at, the bus, tram, metro and unknown
glyphs were near-symmetric boxes: rotated along the course, nothing showed
which end was the front. Each now has a front built into its outline (an
arrow-like nose for the bus, a pointed cab for the tram, a chamfered cab
for the metro), so it survives the tint, the halo and the sensor profiles,
which keep only the outline.
A vehicle with no known course sits at rotation 0, where a pointed glyph
would claim it is heading north. Those vehicles, fleet and selected alike,
now get a symmetric outline (rail and ferry included) and switch to the
pointed one once a course arrives. The raster cache doubles to a fixed 72
variants.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Core told time eight ways: Date.now() in most layers, JulianDate.now() for
flights and military, Cesium's clock frozen at page load for the sky, the
weather clock for observed imagery. They now read one clock,
src/time/worldClock.js, exported as ./time.
Live is a mode, not a timestamp: while live the clock is the wall clock,
so every layer draws as before. Away from live only the layers that follow
the clock move with it. The weather products follow it, as they followed
the weather transport; a host opts others in with follow(id).
- The weather clock takes its time from the world clock and drives its
replay, stepping its frames as before.
- Satellites, launches, flights and military (still 30 s and 15 s behind),
transit, GNSS, Recent Imagery, street level, the HUD and the celestial
ring read worldTimeFor(id). Cadences stay on the wall clock.
- Cesium's sky (stars, sun, moon, atmosphere, lighting) draws at the world
time each frame instead of the moment the page loaded.
- Weather frames and satellites declare coverage() for a host's timeline.
Drop module-local helpers that nothing calls (linkAbort, summarize,
stringOption, summarizeEntity and the polygonCenter, propertyObject and
unwrapProperties helpers only it used, CALLOUT_DOT_SIZE_PX) and unused
import specifiers in runtime modules, tests, QA scripts and tools.
None of the removed bindings is exported. Re-exports such as the ALPR
policy constants and every package export are unchanged.
## Changes
Follow-up to #596 from the owner's look: a parked transit vehicle turned with the camera. Moving vehicles project their world course into screen space on every camera change, but a vehicle that had never moved on screen could have no display course and was skipped by that pass, leaving its billboard at a screen-anchored angle; rotation invalidation also relied on camera events that a pose change without a revision could miss. Now every visible vehicle with any usable course (derived, held, or the feed's reported bearing) is re-projected at the existing 5 Hz cadence on camera pose changes. Moving playback and the 120°/s course limiter are unchanged.
## How it was verified
- `npm run format:check` (861 files), `npm run check:boundaries` (109 groups), `npm test` (4,068 passing), `npm run build` clean; tracking regression 109/109 in a real browser on Google 3D tiles.
- Node tests: a stationary vehicle with a held course, and one with only a reported bearing, under a camera at heading 0° then 90° yield screen rotations 90° apart.
- Browser harness (`scripts/qa-transit.mjs`, keyed on Google 3D tiles): a parked scripted vehicle orbited by 90° rotates 90.000° on screen; a moving vehicle's rotation still matches its rendered travel; both checks fail on main and pass here. Full keyed run: 201 pass; the nine failures are the per-frame allocation gate already recorded as a follow-up and threshold-edge readability lines on the Boston matrix, both unchanged from #596.
## Changes
Follow-up to #587 after the owner's first look at the merged transit layer on Google 3D tiles.
- **Sensor presets keep the real silhouettes.** Under NVG, thermal (white-hot, black-hot, Ironbow) and noir, vehicles are the same silhouettes as in normal view, filled opaque white with a 2 px dark halo, at the CRT display sizes (26 px fleet, 39 px selected). The solid rounded "signature" bodies are gone.
- **The selected vehicle's trail is visible.** The retained history is now draped onto 3D tiles and terrain (`GroundPolylinePrimitive`, `ClassificationType.BOTH`, the way the traffic heat-lines are drawn), 3 px core over a 5 px dark backing, per-segment age colour, a short draped head clipped to the sprite. Two defects kept it off screen before: Cesium's per-instance attribute getters return copies, so the renderer's show/colour edits were discarded, and a marker did not recover after the camera jumped to it, which hid the trail with it. Trail geometry is now prepared on selection independent of floor resolution and marker visibility; sparse long intervals (rail) keep a bounded marker corridor instead of dropping the interval; classification survives map-source changes.
- **Transit sits in the Movement panel group** between Street Traffic and Bike Share (the panel orders by `PANEL_GROUPS`, not by catalog order; the catalog is moved too).
## How it was verified
- `npm run format:check` (854 files), `npm run check:boundaries`, `npm test` (4,062 passing), `npm run build` clean; tracking regression 109/109 in a real browser on Google 3D tiles.
- Browser harness (`scripts/qa-transit.mjs`), keyed on Google 3D tiles and keyless: keyed 194 pass, with the trail pixel check passing at 300, 600 and 900 m; the remaining keyed failures are the per-frame allocation gate already recorded as a follow-up from #587 (CPU and frame time within budget), four readability lines at threshold edges, and the card-anchor check now counting frames where the selected marker is legitimately off screen; keyless 193 pass with the remaining misses being threshold edges on the thin tram silhouette (centre 0.83–0.88 against 0.85) and one bus ring 0.28 against 0.25 on a pure-white roof.
- New harness checks: `Google 3D selected trail visible at 6 of 8 projected samples` (repeated off/on framebuffer captures at 300/600/900 m, samples outside the sprite footprint, a background-change negative control; fails on main, passes here), a camera-arrival check (select a moving vehicle, `setView` onto it, marker shown and trail body drawn within 2 s), `PANEL_ORDER` pinned, raster tests comparing every sensor raster's mask and aspect ratio to the normal silhouette.
- Direct look on a keyed build: a live CapMetro bus at 30 m/s selected through the layer API draws its draped trail along the highway lane (harness capture `keyed-600m-trail-visible.jpg`).
- Adversarial review by Codex Astra before the last two fix passes (stack-switch classification, marker corridor under the vertex cap, pixel-gate loophole), all three fixed with regressions.
Docs: `docs/CURRENT-STATE.md` and `CHANGELOG.md` updated in this PR. No data-source changes.
Supersedes #218 by @spcpza, ported onto the current component layout with fixes from review.
Verified before merge: format, package boundaries, unit suite, build, and the browser tracking suite; a browser harness for the change where one applies; adversarial review applied.
Contributor: @spcpza. His original commit is the base of this branch, and his own re-port onto main (2026-09-15, `5b69011`) was consulted while finishing the height work. That port reads every vehicle's surface from the app's shared ground-floor system (`cachedGroundFloor` / `warmGroundFloor` / `GROUND_FLOOR_LIFT_M`) rather than sampling the scene per layer, keeps a vehicle hidden until its cell answers, warms a bounded batch per poll on a timer instead of per frame, and renders at the ellipsoid above the altitude gate. That is the sounder primitive — one floor system for the app, with the rooftop-versus-street question already settled against a datum-correct DEM prior — and this branch's height work was rebuilt on it, replacing a bespoke cell cache, ground prior and rooftop rule written here. Credit for that direction is his.
Future work (not in this PR), both written up in docs/CURRENT-STATE.md:
- Readable route names. The realtime feeds carry only `route_id`; `route_short_name` / `route_long_name` live in each operator's static GTFS `routes.txt`, and headsigns in `trips.txt`. Doing it properly wants a server-side metadata loader beside the transit proxy with fixed registered static sources, bounded indexes built once and persisted, a slow conditional refresh, and a versioned route dictionary the browser caches. Shipped here: ids are never rewritten, and a cut one carries an ellipsis instead of reading as a typo.
- Below-ground rendering. Subway vehicles are drawn on the surface directly above themselves, because the feeds carry no depth and a train nobody can see is not worth drawing; the card says so plainly. Real treatment wants OSM tunnel geometry per city and a ghosted sprite tethered to the surface. The owner recorded it and left it.
Round four and after (2026-09-15). The owner tested round three under FLIR and NVG, and then asked for the design to be taken further: elegant in performance, beautiful on camera, trails with a cache for public transport, Cesium-native, and a core other moving layers can adopt. Codex Astra reviewed the plan (it confirmed the speed fault: a glide started from the drawn position at receipt time but spanned the gap between report times, so with MBTA reporting every ~10 s against a 15 s poll every second glide ran at 1.5x; it rejected a queued-segment patch), then wrote the design, then implemented it in commit-sized passes with adversarial review between them and real-browser harness runs by the integrator.
What this PR now contains beyond the contributor's original port:
- Delayed playback in a contact-agnostic core (`src/data/contactPlayback.js`): each vehicle keeps a typed, bounded fix history and a display clock that runs at one second per second through it, a feed-derived lag behind real time, holding at its newest fix rather than extrapolating and never sprinting to catch up. Marker, course, motion word, card and trail all read the same displayed sample. The clock has an explicit time-offset and seek API so a rewind is a later feature, not a rewrite; flights and vessels are untouched.
- A selected-vehicle trail (`src/data/contactTrailRenderer.js`, `src/layers/transit/trails.js`): the retained history drawn with batched Cesium primitives, clipped at display time so the head is exactly the sprite, faded by age, in the mode colour (white under sensor presets), on the same surface path as the marker.
- Bounded proxy-side history (`server/providers/transitHistory.js`): fifteen minutes and at most 128 fixes per vehicle with hard byte ceilings, MBTA only for now (opt-in per feed), served by a small endpoint that never fetches upstream, so a selected trail survives a browser reload while the server keeps running.
- Scene work bounded to what is visible and moving, an occluder, cached DETECT candidates, holds on the render loop only while something visible moves.
- Sensor presets: white-hot haloed sprites under NVG/FLIR/noir (black-hot inverts), saturated mode colours under CRT, per-mode bracket tiers in every theme, the selected card keeping its mode colour.
- A discriminating browser harness (`scripts/qa-transit.mjs`) that samples postRender frames, reads the real card anchor, and measures fleet budgets at 800 and 3,000 vehicles.
Not built, recorded as follow-ups: curated route display names (lowest priority per the owner), fleet-wide tails, route snapping, a rewind UI, adoption of the playback core by flights and vessels.
Verified at merge (2026-09-15 morning): unit suite 3,896 passing, build clean, format and boundary gates clean, tracking regression 109/109, browser harness keyless 200 pass / 0 fail (13 sensor checks unexercised because the live view offered fewer than six isolated sprites; every judged sprite passed), keyed on Google 3D tiles 198 pass with the per-frame allocation gate as the only failure. Follow-ups recorded: the keyed build's playback sampler still allocates per frame (CPU and frame time stay within budget; the 3,000-vehicle metro view sits at a 27.6 ms frame interval against a 25 ms budget), the shared detection overlay's per-paint allocation, friendlier route names, fleet-wide tails, a rewind UI, and adopting the playback core for vessels and flights.
Co-authored-by: spcpza <[email protected]>