A host-supplied placement's speed is how fast the marker is drawn. While it
waits for its fixes to catch up it stands still at 0, so tracked-aircraft
panels and the cockpit readout showed 0 m/s for an aircraft in flight.
displayedKinematics now takes derivedFromPlacement: when the drawn speed is a
placement's, the reported ground speed is shown, and the placement's only when
nothing is reported. The placement speed still drives motion and dead
reckoning. Civil and military tracked descriptors pass it from the new
_drSpeedPlaced scratch, which placeLiveAircraft sets.
Turning vessels on returned what the first live poll answered, so a
failing feed (such as a missing AIS key) made enable() resolve false and
the layer reported it could not be turned on. loadLivePositions again
resolves with nothing once the poll is done; going back to live reads the
poll's answer through its own path.
Aircraft icons are one size; helicopters turn a three-frame rotor while
airborne or moving; ADS-B ground vehicles share one amber sprite and
stations/obstacles one mast; vessels get hull sprites by type and one buoy.
Going live keeps contacts until the first live answer and replaces them by
id; fast playback holds before the loaded positions end and prefetches
ahead. Cesium models move their parts from the optional model part state.
A selected plane is drawn by its own model, and its fleet model was let go once
that model drew. Deselecting showed the icon at once, and the icon stayed for
about a second while a new fleet model loaded.
The fleet model now stays loaded but hidden while the plane is selected, kept
where the plane is. Deselecting hands the plane back to it in the same frame,
and the icon shows only when there is no loaded fleet model. Military aircraft
share this code. Vessels never swap models on selection, so they had no flash.
An aircraft, vessel, transit or rail vehicle now draws as its 3D model only
when it is within 3 km of the camera, and as its icon farther away. A model
already drawn is kept out to 3.6 km, so a vehicle on the edge does not flicker.
Proximity and All use the same distance and still differ by how many models
they allow (150 and 350). Models are drawn at their true size: the minimum
pixel size that inflated distant models is gone.
The camera altitude above which no model is considered is now the highest
aircraft the layers draw (30 km) plus the 3.6 km, so a camera high above the
ground still models an aircraft close to it. Cockpit's aircraft silhouettes
keep their own 150/185 km and 400/450 km bands, since they are icons.
Found by a review of the review fixes:
- PanelChrome finds collapsible panels once, at startup, and Context starts
closed, so STATION and LIVE inside the Inspector view (mounted only while
Context is open) were never registered: their +/- did nothing and their
bodies stayed hidden. They sit beside Radio again, always in the page; a
test mounts Context closed and finds their collapse buttons.
- A model whose load failed was never retried while the station stayed
shown (the renderer retries only on an update, and a model not ready is
not sent). It is now released 30 s after the failure and asked for again;
a model still loading also counts as undrawn out of range.
- The Cockpit LIVE page counts as hidden while the briefing card is
collapsed, so the player stops there too.
- Tests: the label-box gate through the real click handler (it fails on the
code before the gate), and the STATION section republishing only when the
pose age crosses a whole second.
- SECURITY.md: an oversized feed frame closes the socket; the unused import
in issCommand.js goes.
- getLiveSubjectKeys no longer sits between trackById's comment and body.
- issCommandSunPoses and issCommandStatusText go: nothing called them.
- The STATION section's 'no signal since' time is formatted in the app's
locale (formatDate), not the browser's.
- LiveControls sends an unchanged view only once: the 2 s refresh resends
nothing (tested).
- The STATION mode radios take arrow keys and keep only the checked one in
the tab order; the LIVE stream arrows are 44 px on a coarse pointer.
- railHeightM is null while the train is drawn on the ellipsoid (floor
quality 0) instead of -1.5 m, so a view waits for the surface.
- An arc step between two reports tells which way a train runs only above
15 m, the layer's parked-train jitter (FOLLOW_MIN_MOVE_M). GPS jitter of
a standing train no longer flips the direction through the playback
segments, which turned a ride 180 degrees every poll.
- drawDirection, a copy of direction, becomes a directionPlayed flag.
- A held vehicle's icon is hidden through the renderer (setShown, then
flushMarkers). The icon sets draw a marker only as last pushed, so the
direct marker.show write left a parked vehicle's icon drawn under the
view's eye.
- disable() ends the hold: turned off and on again, the vehicle shows and
clicks and Escape reach the layer.
- Far above the ground a vehicle with no floor is drawn on the ellipsoid.
Its snapshot now reports groundHeightM null there, as near the ground,
instead of -1.5 m.
- The uneven-ground test also checks the snapshot mid-segment, where a
blend of the two reports' floors would read about 55 m instead of 10 m.
- Resume (and Automatic) give the arm joints the sway does not move their
filed or folded pose back, on both stations; a node given no matrix leaves
the item's nodes, as a model node returns to its authored pose. Tiangong's
reset also forgets the hand-posed arms.
- A telemetry route that never answers (a 404, an HTML fallback) reads as
unavailable instead of connecting forever.
- The STATION section takes the pose age in whole seconds, so live telemetry
no longer republishes it every frame.
- Tests: the telemetry states, the ISS Automatic handing telemetry back,
Resume on both stations.
The fallback to the label box the shared overlay paints for a site now runs
only when the click hit nothing drawn (the map itself), reads the overlay in
CSS pixels, and accepts the site only when its label is the one painted on
top there: an aircraft or vessel, or another layer's label, over a site's
label keeps its own click. Tested against the overlay's hit rects, not a stub.
The station's, the tracked and the docked dots are handed to the model only
once the renderer reports it ready, so the station no longer goes dark while
the file loads, or for good when it fails to. Turning the layer off releases
the model's draw set at once, and a minute out of range or hidden releases
it too, giving its GPU memory back; the next approach asks for it again.
Main split Context into Inspector and Properties tabs and renders the
Inspector only while Context is open; the two sections join it there, after
the entity card. Locales, same-as-english and package boundaries keep both
sides, deduplicated (the branch had added 54 duplicate module entries).
Under another layer's card, radio and Street Level yielded whenever their
own pick window found an item that was not the tap's touch contact. If the
contact was a different station or Street Level item of theirs, the card
yielded to that contact too, and the tap did nothing. Under a card they now
act on their own touch contact, and still yield when the contact is not
theirs. On bare map the window keeps its precedence.
The flights and military layers treat the aircraft they already track as
a passive pick, but they start tracking during the click itself. A card
handler running later in the same click then saw the plane as passive and
acted too: a quake card opened its source while the plane started
tracking, and fire, CCTV and vessel cards could do the same.
The pick registry now records the acting owners of a click's exact hit and
touch contact when the dispatcher first resolves them, and the quake,
FIRMS, CCTV, vessel and Context checks read that record for the rest of
the click. Calls without a click keep the live lookup.
On a coarse pointer the dispatcher can name a contact near the tap instead
of the exact pick. Only flights, military, vessels, radio and Street Level
act on such a contact, so they now register as expanded pick owners, and a
quake card or label yields only to them. A FIRMS fire or CCTV camera reached
only as a nearby contact no longer swallows a quake card, a quake label or
a vessel's own card tap, and FIRMS and CCTV cards yield to a contact whose
layer does act on it.
Radio and Street Level also pick through their own windows. A station or
Street Level item found only there, not as the touch contact, yields to
another layer's card painted over it, and Street Level takes its own touch
contact beyond its narrower window.
Fire, CCTV and vessel cards now act over a passive owner's pick (a flight
trail, the directions route), as the quake card does. The Context panel
leaves a passive route, or a fire or camera reached only as a nearby
contact, to the card painted over it.
Both layers registered their time coverage with the page's world clock when
created and never unregistered it, so an application destroyed and started
again kept each old layer, and its scene and tiles, reachable through the clock.
They now unregister on destroy and register again on init, as earthquakes do.
- The route globe, turning model and cockpit view are the renderer's: the
Cesium plugin hands them over as its `cardPreviews` application hook
(src/render/cesium/cardPreviews.js), and the card's tiles keep only the
words, figures and HUD laid over them. Nothing in the UI reaches Cesium,
and a renderer without the hook leaves the card its photo and figures.
- The turning model is the fleet model the globe draws for the aircraft's
type, from the set loaded at startup, so opening a card fetches nothing.
The flights layer's record now carries the type code and emitter category
that pick it.
- The photo comes from the item's own layer: the flights layer's
Planespotters photo for the plane it tracks, and the vessels layer's Open
Vessel Photos photo for the vessel selected, with its credit. It no longer
waits for Contacts to follow the same aircraft.
- The satellite models are left out: the card shows a satellite's ground
view and graphs its altitude and speed.
- The route globe's airport codes are drawn into its own small scene, the
compass reads its course in the active language, the callouts no longer
speak to screen readers every six seconds, and figures use the app's
number format. Esri's tile address and credit live in one place.
Co-authored-by: Manjunath Paparaju <[email protected]>
The Context panel's main tab shows the mode row again, with Contacts
(nearby sites search, the TR-3B toggle and the Awareness list) and Space
Missions (the roster and launch replay); only the Properties tab hides
them. Radio shows while its layer is on, and turning Radio or Launches on
opens Context. When Contacts follows the aircraft the card shows, its list
sits inside the card in a compact form and the card leaves out the flights
and vessels Contacts already lists. The card's Enter Cockpit replaces the
Contacts button, and leaving the cockpit returns focus to it.
Co-authored-by: Sameh Khamis <[email protected]>
The shell passes the ground picker to the click bridge, so the UI shell no
longer pulls in the annotation and search stack. Context's new modules are
owned by the packages that import them and formatted with the rest.
Co-authored-by: Manjunath Paparaju <[email protected]>
A transit vehicle picked on the map now finds its record in Context (the
click carries the feed and vehicle key), so the card shows its operator,
place, route, report age and the operator's last reported state in plain
words. The layer card breaks transit in view down by motion (moving,
stopped, waiting for an update, no recent fix), mode, operator, last
reported state and crowding where the feed has it; vehicle-position feeds
carry no timetable, so early or late is not shown. Rows in the in-view
list carry a motion icon.
Clicking anything a layer can identify opens one card in Context: a hero
tile (route globe and 3D model for a flight, the camera for CCTV, headline
figures otherwise), its facts, actions with Cockpit or the orbital view as
the primary one, and a standard set of nearby blocks (weather and local
time, flights, vessels, hazards, alerts) within one radius the user sets.
Aircraft show altitude as a graph. Things that move are followed when
picked, and a card closes when its layer is turned off.
With nothing selected the panel describes the view: the layers that are on
with a breakdown of what each holds, the camera's height, what is in view,
then time, weather and local news. From far out it shows worldwide counts
per layer. A search field in the header narrows whatever the panel shows.
Prototype. Context reads weather and hazard feeds while its panel is closed,
the two 3D previews on a flight card repaint continuously, Follow can show
pressed after tracking has ended elsewhere, and most new strings are fixed
English. Same-named sites are told apart by position, not by a stable id.
Three fixes to how the globe draws and reports loading.
**The idle frame rate is the app's rule.** The Cesium frame port capped the loop at `IDLE_FRAME_RATE` whenever nothing held it, so the rule lived inside the renderer. The render governor now sets the rate: the display's own while the loop is held, `IDLE_FRAME_RATE` while not. The frame port gains `onHeldChange(cb)`, which says when its first hold is taken and its last released (animated visual styles included), so the governor hears every hold. The quality setting's frame-rate cap is kept apart from the governor's rate, and the loop draws at the lower of the two, so neither overwrites the other.
**Line batching is timed.** A line set waited 30 drawn frames before its unchanged lines settled into a static batch (300 for the long wait), so the batch built twice as fast at 120 Hz as at 60 Hz, and took seconds at the idle rate. It now waits `SETTLE_MS` (500 ms) and `LONG_SETTLE_MS` (5 s), and moved shapes go back into their batches on the same timing.
**KEY REQUIRED.** A layer that cannot load without a provider key ended the global status chip LOAD FAILED. The chip now has a KEY REQUIRED outcome, ranked below a real failure: a layer whose stats say `keyRequired` ends KEY REQUIRED, any other failure still ends LOAD FAILED. Vessels report a missing AISStream key as `keyRequired` and name the key in the panel; a later outage clears it, as it is no longer the key that is missing.
Checked: the full suite (new tests for `onHeldChange`, the quality cap against the governor's rate, timed settling, and the chip with and without a key), format, boundaries, build, the stub renderer boot and the Cesium conformance run; in the browser, the idle and held frame rates; and the first-run check now asserts that with no keys set the chip never says LOAD FAILED.
The selected vessel's track drew every fix it held. Following the world
clock, it ran ahead of the icon to the vessel's newest fix; live, it
stopped at the last fix while the icon moved on from it. A change of time
restarted it from a single point until the track at the new time arrived,
so it went blank at every step.
- The track draws the fixes at or before the time the vessel is drawn at;
live, every fix.
- Each frame a head joins its last drawn fix to the icon where it is drawn,
as flight tracks do; none past TRAIL_HEAD_MAX_M (20 km), where the clock
has moved beyond the fixes the track holds.
- A change of time keeps the track, drawn up to the new time, until the
track at that time replaces it.
Pressing Live while a timed snapshot load was in flight left the live poll
waiting on that load. The live poll returned early, so the map showed no
vessels until the next refresh. The live poll now drops a timed load still
in flight, and loadAt shares the same dropLoad helper.
Flight trails register their ids so every layer reads a trail click as a
no-op, and the directions route claims its line and markers though it acts
only on its maneuver steps. The quake card and magnitude labels yielded to
any registered owner, so over a trail or a route they did nothing. Pick
owners can now name the picks they never act on (registerPickOwner(...,
{ passive })); isActedOnByOtherLayer leaves those out while
isOwnedByOtherLayer is unchanged, so they are still not empty space.
Submarine cables and rocket launches acted on any scene pick, so a card or
label over a cable or a launch marker made both layers act. Both now stand
aside when a world-overlay entry is under the click, as drone airspace and
fire perimeters do through the top-entry check. Each of these layers, and
the quake discs, registers its shapes with registerCardBackground. CCTV
asks isCardBackground instead of matching other layers' set and id formats,
so a live top CCTV card acts once over any of them, while unknown
identified objects and registered owners still block it.
Card handlers hit-tested only their own source, so a card buried under
another layer's card still acted, and a click on a selected quake card over
a vessel or fire card made both layers act. Vessels, FIRMS, wildlife, news,
ghost maps and shipwrecks now read the unfiltered topmost painted entry:
their own card acts only when it is on top, and a click on another layer's
card is that layer's, so it neither acts here nor clears a selection.
A top news or wildlife card still acts over another layer's scene item, so
it never goes dead over a flight trail or a directions route; a registered
marker under a foreign card is still its layer's to select.
Four Cockpit views from the layer's own Tiangong model (tiangongMounts.js):
Tianhe's port side, the outer ends of Wentian and Mengtian, and the docked
vehicle standing in on the aft port. Each rides its own catalog entry, so
there are no cards; leaving a station view selects the station's first
view's entry (Tianhe here, Nauka on the ISS) instead of Nauka by name. The
model stays drawn while the Cockpit rides Tiangong.
- A hand-set Canadarm2 joint no longer stops Dextre's and the Japanese arm's
sway: only the joints set by hand hold still.
- A ring already shown or hidden is not sent to the renderer again (the
close-up asked for it every frame).
- Node posing: the matrix handed to a node goes through one scratch (the
node copies it), and a name the model lacks is looked up once.
- The tracked card's clearance step holds until the clearance has left it,
so jitter at a step's edge no longer republishes the card every frame.
- A frame the station cannot be placed in gives its dots back rather than
drawing neither model nor dot.
Itallo's merge of main carried his own port of the ISS model onto the draw
port and gave the renderer contract a `nodes` member (the Cesium port writes
each named glTF node's matrix once the model is ready, changed ones only).
The satellites files keep this branch's versions, which cover both stations,
the STATION and LIVE sections and telemetry; the joint drivers' poses are now
the draw item's `nodes`, so the arrays, radiators, dishes and arms move again.
His duplicate point-range setters go; the changelog fragment takes #1690.
- Installations: the label-box click fallback reaches the controls' methods
(it read an undefined member and never ran).
- Station model: the docked-companion scan runs once a second again; the
hand-over pass runs once, when the model starts drawing.
- Station panel: an unchanged view is not republished every frame; one
render pump across slider drags, stopped on destroy; destroying the panel
hands the joints back to Automatic, and the joint drivers' reset forgets
manual choices and the telemetry lock.
- Telemetry relay: a null TimeStamp is no time, not the first second of the year.
- Drop issCommandShouldShow and issCommandNoteText, which nothing called.
Hiding the model (the Cockpit riding Tiangong) gave the docked dots back and
with them forgot that the ridden vehicle was docked, which showed the model
again the next frame, and so on: the hull flickered in the Cockpit at SZ-23
and Mengtian. The orbit-against-orbit scan now keeps its own docked set,
kept current before the show decision, and the hand-over of the dots is a
separate matter.
Builds on the ISS 3D model (PR #1690) and brings it onto main's renderer
seam: the station models are items of a `models` draw set, posed by
heading, pitch and roll from the station's flight axes
(`headingPitchRollOfAxes`), with the camera, canvas and clicks read from
the renderer's ports; no satellites file reaches Cesium. The joint drivers
write column-major matrices into node poses the model part keeps, for a
renderer that can pose nodes; until the draw contract has that member the
models draw rigid.
- ISS joints take their angles from NASA's ISSLive telemetry, relayed by
the server behind ISS_TELEMETRY_ENABLED.
- STATION and LIVE sections of Context replace the floating command panel
and player; both collapse like the Radio section.
- Cockpit rides the ISS from mounts on its model; the LIVE page in the
Cockpit briefing.
- Tiangong as a second station model, with computed joints.
- Installations: a label-box click selects the site.
Drone airspace and fire perimeters select a zone or incident from any
shape hit, so a quake card or magnitude label painted over one made both
layers act on a single click: the quake opened its USGS page or flew to the
quake while the area was selected too. Fire and vessel cards over an area
did the same.
The areas now stand aside when another layer's card or label is the topmost
overlay entry, the rule the quake handler already follows for cards painted
over its discs. Deselection and every other path are unchanged. Items of
layers that never act on clicks no longer matter: the quake card and labels
keep working over air-quality stations, traffic lines and OSM places.
Registering quake discs as pick owners changed how other layers read a click
anywhere over a quake: sibling layers yield to owned picks before their own
card hit-tests and treat an owned pick as not empty space. A fire card drawn
over a large quake could not be clicked and the quake beneath was selected,
radio near-miss taps found nothing, and a followed aircraft kept its camera
while the quake took the shared selection.
Leave the discs unregistered, as drone airspace and fire perimeters do, so a
disc reads as empty space to other layers. The quake handler finds its own
discs by draw set, reads the click's resolved hit, and yields when another
layer's card or label is the topmost overlay entry. Another layer's object
under the quake card or a label takes the click before either is read, so a
click on the card over an aircraft does not also open the USGS page. A feed
refresh inside the contour window no longer asks for a frame while the disc
is off screen.
The catalogs conflicted only on neighbouring lines: no key changed on both
sides, so they are merged key by key in main's order. Main removed the rail
timeline, the other user of plain "Latest", so that entry is pruned and the
News test no longer checks the timeline's wording.
Clicking a quake's disc selects it and shows a card with its magnitude and
USGS class, a class meter with the depth band, place, UTC time and source.
With a USGS event id the card opens the event page. Clicking a magnitude
label, the part a far view can hit, also flies the camera to the quake. The
selection joins the shared context selection, so "what's selected" answers
with it.
The selected disc is painted with a gradient that fades to its outer circle,
and wavy contour lines run out from the marker for three cycles while it is
on screen, then rest as still contours, so a parked camera returns to idle.
A feed refresh updates the selection in place without restarting the lines
or taking back the shared selection.
The package takes input, picking, context, focus, the opener, the painter
and the translator by injection; without them it draws as before.
- The street-level plan step names its place the way show_street_level
reads its arguments: a pointed or numbered thing has no place yet, and
"this spot" needs both coordinates.
- The view-centre error message is removed: the Street Level layer always
gives its own translated text for an empty search, so it never showed.
"the view centre" is one exported constant for both voice modules.
- The orbital site status uses the word of the FOCUS card in es, fr, it,
pt and he, and the Wildlife chip agrees with "avistamientos" and
"avvistamenti".
- CURRENTLY OVER is the noun for an overflight in de, uk, it and pt,
shorter than before, so the place name keeps its room on a phone.
- The glossaries record the new terms; I18N.md words two rules more
exactly.
While the timeline plays or is scrubbed, each vessel icon is handed to the
renderer as a motion segment along its track (a straight piece of at most
10 km between two fixes, on the scene clock), as aircraft already are. The
layer writes an icon again only when its segment runs out or the time
moves back before it, instead of moving every icon on the CPU every frame.
Behaviour is kept:
- Icons follow the same great-circle track between fixes (a 10 km chord
stays within 2 m of it) with the same course.
- A vessel still appears TIMELINE_UNSEEN_MS before its first fix and
hides again when the time moves back before that.
- Cards, the selected vessel, ship models and the vessel the bridge camera
rides are read where they are every frame; the rest within
HIDDEN_FOLLOW_MS, as before.
- Position reads (getAllPositions, getNearby, the focus pass, the
detection overlay, single-vessel lookups) return where the icon is drawn
at the world time.
- Going live, each icon holds where its segment last drew it, unless a
live update has drawn it since.
- Trails are unchanged: they are built from the feed's fixes, not from the
per-frame position.
- Live mode and renderers without the motionSegments capability take the
previous path unchanged.
Main's renderer seam (#1760) keeps Cesium inside src/render/cesium/, so the
ISS model now draws through the renderer contract:
- issModel.js draws the station as an item of a draw-port `models` set
(url, position, heading/pitch/roll from its flight axes, scale, minimum
pixel size, display range), hands the near range over through the dots'
`displayRange`, and reads the eye from the camera port.
- issArticulation.js computes each joint's matrix as plain numbers and the
Sun from geo/celestial, and hands them over by node name.
- The contract's ModelItem gains `nodes`: transforms of a model's named
glTF nodes, which the Cesium port writes once the model is ready and
again only when they change; a dropped name gets its authored pose back.
- issCommand.js asks the frame port for frames and zooms by shortening the
camera port's follow offset.
- A click on the model is told by its draw hit.
Co-Authored-By: Claude Opus 5.5 <[email protected]>