Shapes take their radii in metres; the world annotation ring follows the
camera height itself (ringRadiusAt), resizing on preRender. The radial rim
preset and depthBias go: the launch pad zone draws a canvas image fill made
by the layer. Solid and dashed lines take one depthFail look (solid or
dash) in place of depthFailColor and depthFailDash. sonarCadenceHz goes from
the quality settings: nothing set it, and the sweep moves every 80 ms.
Camera move, look, rotateAround and zoom leave the camera port: the app's pans,
in-place turns, globe turns and zooms are setView views summed over the pose
(geo/eyeMoves), and the Cesium port places a view by direction and up
exactly rather than through heading, pitch and roll. The conformance driver
runs those script steps through setView; the lookAt script turns in place
where it turned about the frame-local axis, and its reference is recorded
again.
Brings in voice camera tilt (#1520) and free look with globe-in-view
recovery (#1532). The tilt and look maths in cameraVerbs.js and
globeInView.js run on camera poses and the geo helpers instead of Cesium.
The free-look height limit lives in the Cesium adapter
(render/cesium/freeLookLimit.js), installed through the application viewer
hooks; the globe-in-view recovery that main added to app/viewer.js runs on
the camera port in app/globeInViewRecovery.js. The scene-mode checks are
gone with the 2D and Columbus modes the seam does not draw.
The camera verbs size their keyhole fit by the renderer's canvas and listen
on it for the user's input, and the voice actions size their view samples
by it, rather than reaching through `viewer.scene`; a viewer with no
renderer bound answers with its own canvas, the same element. The test
fakes give their viewers a canvas, and a fake camera binding's renderer
reports the fake viewer's.
The verbs' motions run on the frame port's preUpdate, which Cesium raises
right after the clock tick they used to run on; a renderer bound after the
verbs started is picked up when the next motion starts. They read the camera
from its port's pose, wait for a flight through its `flying`, and frame an
orbit from the pose with the geo maths.
Globe rotation tests the keyhole fit from the pose and the port's projection
matrix (a centred perspective one) instead of Cesium's frustum, and checks
the Globe View preset by computing its pose rather than cloning a Cesium
camera. The contract's renderer is a 3D WGS84 globe, so the scene-mode and
non-WGS84 refusals go with their tests. At the start the captured pose is
written back through setView only when the camera handoff changed it (a
route's bank levelled), instead of copying the basis into Cesium's camera.
The verbs still read the viewer's canvas for its size and listen on it for
the user's input.
The route dolly's frame (arc points, horizontal chords, turn angles, the
heading's turn toward the gaze, the bank roll and the eye) and the corridor
cells now use src/geo instead of Cesium's Cartesian3, Cartographic,
Quaternion and Matrix3, with the same formulas in the same order, so every
frame comes out bit for bit as before. The mesh floor probe takes the viewer
and asks heights through heightsOf, so it sees through draw sets not drawn
for height queries, as every other height read does.
The Cesium scene's height service moves into the Cesium adapter
(src/render/cesium/heights.js), where the Cesium query port answers its
height members through it; the files still bound to the Cesium scene
import it from there.
src/queries/heights.js becomes the height gateway over the renderer's
query port: heightsOf(viewer) answers now, clampNow, batch, clampBatch and
supported as before, a miss is null, a failed or destroyed query rejects,
and exclusions are draw set ids. The source scan that keeps height queries
in one place still holds: outside the renderer, only the gateway asks for
streamed heights. The bikeshare layer samples its station heights through
it.
Heights leaves the allow-list.
src/data/followed.js answers what the camera follows: the camera port's
target, or the entity a layer still tracks itself, seen through the same
fields. Ownership checks, render holds, guards, voice actions, the CCTV
pacing and the navigation release paths read it instead of Cesium's
trackedEntity, so they keep working when layers follow through the port.
The release paths stop following, cancel the flight and release the
camera through the port. The rotate refusal names the followed target by
its name or label title.
The Cesium camera port gains move, look, rotateAround and zoom, and the
browser conformance run now checks them, the lookAt-frame commands, the
changed thresholds and moveEnd (timed by the clock, not a frame count).
Orbit, the Bhote Koshi focus and cinematic, the launch zoom anchor and
replay chase, the camera verbs' motion tick and roll levelling, and
voice zoom write through the port.
From 400 km, a tilt to -5° that a zoom out x2.5 caught 70 frames in eased down from the camera's old pitch at the new range. That put the camera below the place's horizon: the first frame's crosshair hit the ground 186 km from London, and London stayed hidden for about 11 frames. The re-solve also left the pivot pitch at 0°, so a zoom in before the next frame computed an infinite clearance floor, was refused, and stayed at 1,000 km.
The re-solved pivot pitch now stops at the place's horizon limit, or where the pivot already was. A camera that the zoom leaves past that limit steps down to it with the zoom and holds it, and the zoom still reports that angle. A zoom in straight after brings the range back to 400 km.
From 400 km, a tilt to -5° that a zoom out x2.5 caught at -8.0005° reported -8°, and the next frame jumped to -9.407° and ended there. The zoom kept the camera's pitch as the goal when it was already past the new range's horizon limit, but at the same pivot pitch the longer range looks down more steeply, so the next lookAt dropped the camera 1.4° at once.
The zoom now re-solves the pivot pitch so the new range keeps the camera's pitch, and aims the tilt at the asked angle or the new limit, even when that limit is below where the camera stands: the tilt eases down to it. The zoom's reply names that end, and the camera reaches it with no frame moving more than 0.1°.
A pivot range rebuilt from the camera's position came back a hair over the 1,000 km cutoff when the view sat exactly on it, so a tilt from 1,000 km ran in place and lifted the crosshair onto the sky. The cutoff now allows 1 m of slack.
A zoom during a tilt to an angle changes the range the pivot holds, and with it the place's horizon limit, but the tilt kept its old goal and its reply its old angle: from 400 km, a tilt to -5° zoomed out x2.5 reported -5° with no note and ended at -9.4°. The zoom now re-judges the goal at the new range, eases the tilt from where it is to it, and its result names the angle the tilt now ends at, with a note.
The pre-check picked the in-place look from args.direction alone, while the tilt itself turns down for any direction but up. A tilt sent as left or right at the frame limit was checked as a turn left or right, refused as losing the globe, though it turns down toward the planet. A rotate sent as up or down was checked as a look up or down, though it turns right.
A tilt's look now comes from its goal pitch against the current pitch (tiltLook), and the tick tilts in place through tiltInPlaceWithinFrame(cam, m, goalPitch). Neither depends on the direction word, so a tilt to an absolute angle, or a tilt with no direction, can use them as they are.
From 550 to 1,000 km of range the camera's -5° limit lies past the place's own horizon. The swing ran into its 150 m clearance, let go of the pivot and tilted the rest in place, which lifted the crosshair onto the sky (28 to 63 km up from 600 to 900 km), and a return to top-down then landed hundreds of km from the place.
The swing now hands over to an in-place tilt only where the clearance is what stops it (within about 17 km). Farther out it stops with the camera 0.5° above the place's horizon, still pivoting: a tilt to an angle reports the angle it reached with a note, a continuous tilt stops there, and a further tilt up is refused as at the limit. Tests check that the crosshair stays on the place, frame by frame for a continuous tilt, and that top-down returns over it.
Review follow-ups for the globe-in-view recovery and voice limits.
- Leave a camera flight in progress and a playing Director scene, holds
included, to their own framing. The recovery is now installed with the
scene tools, which own the Director, and reads its running state.
- Reuse a voice turn's half-degree proof only from the position and
direction it was proven at, so a release that moves the camera checks
the turn again.
- Share one free-globe-camera check between the recovery, the voice
turn limit and the globe rotation.
- Keep an enableLook setting other code makes after the free-look limit
is installed, instead of writing back the install-time value.
- Name the nudging test for what it asserts, the 1% floor, and document
that a view losing its surface without a camera move waits for the
next one.
- A tilt's angle, limits and "unchanged" check use the camera's own
pitch. At regional range the pivot pitch is up to about 8 degrees
shallower, so "tilt to 5 degrees" from 900 km ended at -12.9 degrees.
The swing now solves for the pivot pitch that gives the camera angle.
- A zoom out during a pivoting tilt stops at the 1,000 km pivot limit
instead of the orbit's 5,000 km, and a zoom in that reaches the
clearance is applied before the pivot ends.
- An angle the camera already holds still takes navigation, so it stops
a running motion and releases the follow camera.
- A motion queued behind a fly-to moves to a newer fly-to as soon as it
begins, so a stalled lookup no longer holds it past a flight that
landed. Wait listeners are removed when a wait ends, and a lookup that
found nothing points straight at the flight that moved.
- A fly-to that stops a running motion names it (stoppedMotion).
- A tilt left or right is refused, and the pitchDeg description says
steps use direction.
About 20 sites called scene.sampleHeight, globe.getHeight,
scene.clampToHeight or the MostDetailed variants directly, each with its own
idea of a miss (undefined, NaN, a throw). They now ask heightsFor(scene) in
src/queries/heights.js:
- now(point, { against, exclude }) answers from what is loaded, or null;
against is 'surface' (what is drawn) or 'terrain' (loaded terrain only).
- clampNow(position) moves a position onto the drawn surface, or null.
- batch() and clampBatch() wait for the most detailed tiles: null per
missed point, a rejection when the whole query fails.
- supported() reports { surface, clamp } without allocating.
Cesium still answers now() synchronously, so nothing changes on screen and
nothing is slower: in the live app 1,000 calls cost the same through the
service as direct (terrain 0.5-0.7 ms, surface 2-6 ms a call, run-to-run
noise larger than the difference). Every site already treated a miss as
"hold the last value or fall back"; a renderer that can only answer from a
cache or asynchronously can now plug in at one place.
- A Bhote Koshi evidence point whose terrain sample misses stays at its
fallback elevation instead of reading the miss as sea level.
- The mesh floor sampler skips a scene without depth-texture support
instead of spending its budget on probes that throw.
- The world annotation probe's trace reads hit/missed.
- A source scan forbids direct height calls outside the service.
The service is exported as ./queries/heights and documented in
docs/APPLICATION.md.
A motion queued behind a voice fly-to acts on the last flight that moved the camera. A later lookup that was not found, threw, or was cancelled once a newer voice fly-to had begun moved nothing, so the motion looks past it rather than refusing or running early and cancelling the flight still in the air. It never acts at a flight older than the one it started waiting on. A lookup cancelled while still the latest voice flight (a search, a share link, Cockpit) still refuses.
The top-down no-op now reports the camera's real pitch.
A motion queued behind a voice fly-to now follows a later fly-to in the same reply whether the earlier one arrived, was cancelled or failed. A geocode that loses navigation reports failed, so the motion used to be dropped; and a flight left flying while the next place is looked up could land and run the motion there, taking navigation and cancelling the newer flight. The deadline, abort and stale-reply checks still end the wait.
pitchDeg -90 or -89 from a top-down view is now unchanged rather than a 1° tilt up, and the tilt tests' pitch loops are bounded.
From the whole-globe view the camera could end up facing empty space with
only stars on screen. Cesium's free look (Shift+drag) turns the camera in
place, and from 18,000 km the planet's edge is only about 15 degrees from
nadir, so a few drags turned it out of frame. The rolled pose was then
saved into the share hash, so a reload or shared link opened on stars too.
- Allow free look only below 1,000 km. Orbit, tilt and zoom are unchanged.
- Measure how much of the frame shows the planet's surface by casting a
32x18 grid of view rays at the WGS84 ellipsoid. While the scope mask is
on (the default) only the rays inside its keyhole count, since the mask
hides or dims the rest of the frame.
- When a camera move ends above 1,000 km with no ray on the surface, turn
straight down at the same position and heading. Limb glow and a sliver
up to about one grid cell thick can count as out of view. The end of a
move comes from Cesium's moveEnd and from a check of its own that
samples the pose every 250 ms after moveStart and acts once it has held
for half a second: at some of these poses the camera drifts by a
rounding error every frame, so Cesium never sees it stop and never
raises moveEnd. The zoom-out guard from #1522 keeps wheel and pinch
zoom-outs in view; this catches the other ways a move can end looking
away, such as a saved or shared view that did, or a
drag that Cesium turns into an in-place look below its 7,500 km
trackball height (one that starts on the stars, or a tilt drag with the
screen centre off the planet). Views with more surface, tracked or
locked cameras and the 2D and Columbus modes are left alone.
- Voice tilt and in-place turns of a free 3D globe camera above 1,000 km
stop when about a tenth of the frame still shows the planet (or about as
much as it showed when it started, two grid cells of sampling noise
allowed), never below about 1% of the visible frame; a view that already
shows less only keeps or gains what it has. A turn that cannot go half a
degree further without crossing that limit is refused with a reason
instead of reported as done, and a turn it accepts turns at least that
half degree. A turn that keeps or gains surface is not refused, even
after the window has been resized, except that near the limit, where the
planet's edge crosses the sample grid, sampling wobble can occasionally
refuse one (most often above about 15,000 km and on phone or ultrawide
frames); nothing then turns away from the planet. A turn that starts
where the last voice turn left the camera keeps that turn's limit, or a
higher one if the planet now fills more, so repeating the request does
not take any more; once anything else has moved or turned the camera, a
turn is measured from what is on screen. A request made while the camera
is tracked is judged by the pose voice's release of the follow camera
will leave, before that release, so a refused turn keeps the tracking.
The frame measure and the look-step limit live in src/globeInView.js,
shared by the viewer and the voice camera verbs.
A zoom in during a pivoting tilt stops at the range that keeps the camera 150 m above the pivot at its current pitch. A zoom that moves the range by less than half a metre (at the clearance, the 80 m floor or the 5,000 km cap) now answers not zoomed instead of ok, and a tilt reports tiltRangeAdjusted rather than orbitRadiusAdjusted.
- A motion waiting on a voice fly-to follows a later fly-to in the
same reply that cancels it, within one deadline, instead of
reporting that its flight did not arrive. A stale reply stops
following.
- The wait is 15 s, down from 30 s: it holds the tool output, and on
Gemini the later tools in the turn.
- Beyond 1,000 km of range a tilt happens in place instead of
swinging thousands of km about the crosshair point.
- The tilt-nudge limits read the pivot pitch the motion starts from,
including for a voice tilt from a tracked view, whose follow camera
is released before it moves.
- move_camera's argument checks run before the flight wait, so a
malformed call is refused at once.
- Tests: t.after cleanup in the fly-then-motion loop, the pitchDeg
pin asserts the field before removing it, and the handoff-order
pin follows the extracted argument checks.
- A zoom during a pivoting tilt now scales the range the tilt holds,
as it already did for orbit, instead of being undone on the next
frame while reporting success. The zoom limits no longer move a view
the wrong way: a zoom in leaves a view closer than 80 m in place, and
a zoom out leaves an orbit beyond 5,000 km where it is.
- A grab, touch or wheel on the map while a voice fly-to is in flight
drops the motion queued behind it. Cesium lands the flight anyway,
so the orbit or tilt would otherwise take the camera back. Chained
fly-tos in one reply keep the earliest snapshot.
- A pivot tilt toward the horizon stops lowering the camera at 150 m
above the pivot and tilts the rest in place, so a close view no
longer ends inside tiles or a hillside.
- pitchDeg is an absolute angle. A direction that contradicts it is
refused, judged from the pitch the swing starts at, and the tool
description says so.
"Fly to Paris and orbit it" reaches the app as two sibling tool calls,
which OpenAI runs at once. With a place that needs a lookup, the orbit
started over the old view and the late flight then replaced it; with a
known place, pan and rotate cancelled the flight already in the air.
Orbit, pan and rotate now wait for a pending voice flight the same way
tilt does: up to 30 s, and not run (saying so) if the flight is
cancelled, finds nothing or times out. Stop and rotate_globe do not
wait. Orbit keeps its own arming for flights the voice runner does not
track.
A voice fly-to frames a city top-down, at pitch -90. The tilt clamp
rejected any step that left the pitch below -89, so the first frame of
"tilt up" stopped the motion and "tilt down" was refused: from the view
voice lands on, no tilt ever moved the camera. A bare "tilt the camera"
also failed because tilt required a direction.
- Clamp tilt only in the direction of travel, so -90 can tilt up.
- Swing the camera about the ground under the crosshair, so the place
stays centred and the heading is kept. A tracked view still tilts in
place, and a pivot tilt yields when tracking takes the camera.
- Add an optional move_camera pitchDeg for "tilt 45 degrees"; a tilt
with neither angle nor direction settles at -45 (oblique view).
- Re-derive the voice tool schema pins for the new argument and wording,
and keep the Realtime prompt under its 52,000-character budget.
Answers the review of bdbbc3d7 and the IC8 pass after it.
A shape hidden from Draw's list was only set to alpha 0, so the line's
flowing stroke, which keeps its own colour, stayed painted. Now:
- the world renderer's sync() sets every entity of a hidden mark to
show = false, and FlowMaterialProperty follows the mark's alpha;
- the screen renderer does not project a hidden callout, so it is not drawn
and cannot push a visible label aside;
- hiding acts at once, even before a mark's first frame, and with every
mark hidden the annotations render hold is released after one last frame;
- fly_route skips a hidden route.
Hand-drawn shapes are never merged as duplicates: every one is drawn on
purpose and unnamed until its row names it, so a second pin dropped near
the first was dropped, or replaced the first when its colour differed. A
restyle the renderer cannot draw now also syncs the renderer.
Tests cover each: renderer show/hide and flow alpha, the screen skip, the
render hold and its last frame, a show with no fade-in, hidden routes, two
nearby pins, and the restyle rollback.
Supersedes #219 by @spcpza, ported onto the current component layout with fixes from review.
Verified before merge: format, package boundaries, unit suite, build, and the browser tracking suite; a browser harness for the change where one applies; adversarial review applied.
Co-authored-by: spcpza <[email protected]>
The first formal release.
- One-click install via Pinokio; keyless boot lands on a live Esri World
Imagery satellite globe with keyless terrain, with automatic OSM fallback
and graceful degradation when terrain is unavailable.
- Provider Settings (the POWER UP panel): add, replace, or remove API keys
inside the app; credential files made owner-only before any secret is
written; external keys shown read-only; the panel refuses shared or proxied
servers.
- Keyless capability responses for the optional HUD summary and place search.
- Aircraft-identity voice answers cover operator, type, and route, and say so
plainly when enrichment is unavailable.
- README rewritten keyless-first; concise 0.1.0 changelog section; CI
workflow included.
Gates: 2,672 unit tests pass / 0 fail, build clean, tracking regression
108/108, map-source tray QA pass, setup doctor ready.