Main brings the reviewed one-time-control and timeline-mark changes. They
keep this branch's renderer work: earthquakes draw through the draw port and
register their strong quakes as marks; the weather clock keeps `follows` beside
`world`; the weather layer measures ages and delays from the timeline time;
the Visual panel keeps its sky and weather groups under Effects. Tests that
moved time through the weather clock now move it on the world clock.
5150279cc, 97bd61711, 900c76425 and 4f23ad330 went to main, reviewed and
changed, as #1745. They are taken out here so main brings them in as
merged, rather than as two copies of the same changes in conflict.
A weather row's play ran the world clock at whatever rate it had, and
going live set that back to 1, so the speed chosen on the timeline was
lost. The world clock now keeps its rate while paused and live, and the
timeline's speed sets it whenever it is chosen, so any play runs at it.
A row's play starts from the start of the covered time when live or at
its end, as the timeline's does, and does nothing while every product the
row shows is suspended, as its reduced-motion note says.
Live, the Weather panel's frame time is the newest of each product's
frames, suspended or not, so it no longer goes away under reduced motion,
on a hidden page or without an imagery host.
A weather layer made without a weather clock builds its own when first
enabled rather than when made, so a layer never turned on leaves the
world clock alone, and its own clock (createWeatherClock({ shared: false }))
leaves the world's time where it is when destroyed; only the last shared
weather clock sends the world live.
On the timeline, a zoom or a pan clears the hovered tick's label, a label
is never wider than the track and ends in an ellipsis, and a mark's label
is cut to 60 characters (WORLD_CLOCK_MARK_LABEL_LENGTH).
The changelog entry says what a row's step does, names the earthquake
layer's new exports and says it registers with the world clock.
The timeline drew a tick for every registered mark, and the weather clock
registered every radar, satellite and lightning frame, which come every few
minutes, so the track was a wall of dashes and the arrow keys crept from
frame to frame.
Weather products now register only the span of their frames (start and
end, as before) with no marks. Holds, the gate and the next-frame wait
while the world plays are unchanged. A weather row's step param goes to
the previous or next weather frame (every shown product's frames, and the
row's own while it is suspended) rather than to the timeline's marks.
The Earthquakes layer registers with the world clock once, at init, and
unregisters on destroy. While on, its quakes of magnitude 6 and up
(EARTHQUAKE_MARK_MAGNITUDE) are marks, and its coverage is their own span,
or none without any, so it never stretches the timeline beyond the feed.
Off, it has none. It tells the clock when the set of marks changes. The
map still draws every M2.5+ quake.
Launches stay marks. With no mark ahead or behind, the arrow keys step
along the track as shown.
The Weather panel kept a second time transport of its own: a slider, step
buttons, Latest and Play, backed by a replay in the weather clock that
stepped the observed frames every two seconds and went round from the last
to the first. The weather clock also attached itself to the world clock as
a driver, so the timeline's Play became that replay whenever weather was on.
The panel now shows the frame time only: the newest frame and its age while
live, the timeline time alone at a past time. The weather clock no longer
has setTarget, step, latest, play, pause or togglePlay, its state no longer
has playing, and it no longer drives the world clock. It still follows the
world time, registers each product's frames as marks the timeline's arrow
keys step to, holds its products, and gates the world's continuous play at
each next frame until it loads. weatherClock.world names the world clock it
follows.
A weather row's play, latest and step params move the world clock as the
timeline does: play toggles continuous play (from the start of the covered
time when live), latest goes live, and step goes to the previous or next
mark. The rail timeline component, which only the panel used, is removed,
along with its unused messages in every locale.
The timeline drew a tick for every registered mark, and the weather clock
registered every radar, satellite and lightning frame, which come every few
minutes, so the track was a wall of dashes and the arrow keys crept from
frame to frame.
Weather products now register only the span of their frames (start and
end, as before) with no marks. Holds, the gate and the next-frame wait
while the world plays are unchanged. A weather row's step param goes to
the previous or next weather frame (every shown product's frames, and the
row's own while it is suspended) rather than to the timeline's marks.
The Earthquakes layer registers with the world clock once, at init, and
unregisters on destroy. While on, its quakes of magnitude 6 and up
(EARTHQUAKE_MARK_MAGNITUDE) are marks, and its coverage is their own span,
or none without any, so it never stretches the timeline beyond the feed.
Off, it has none. It tells the clock when the set of marks changes. The
map still draws every M2.5+ quake.
Launches stay marks. With no mark ahead or behind, the arrow keys step
along the track as shown.
The Weather panel kept a second time transport of its own: a slider, step
buttons, Latest and Play, backed by a replay in the weather clock that
stepped the observed frames every two seconds and went round from the last
to the first. The weather clock also attached itself to the world clock as
a driver, so the timeline's Play became that replay whenever weather was on.
The panel now shows the frame time only: the newest frame and its age while
live, the timeline time alone at a past time. The weather clock no longer
has setTarget, step, latest, play, pause or togglePlay, its state no longer
has playing, and it no longer drives the world clock. It still follows the
world time, registers each product's frames as marks the timeline's arrow
keys step to, holds its products, and gates the world's continuous play at
each next frame until it loads. weatherClock.world names the world clock it
follows.
A weather row's play, latest and step params move the world clock as the
timeline does: play toggles continuous play (from the start of the covered
time when live), latest goes live, and step goes to the previous or next
mark. The rail timeline component, which only the panel used, is removed,
along with its unused messages in every locale.
At a past time the radar, lightning and satellite cards aged the shown
frame and judged the source delayed against the wall clock, so a frame
from years back read "Source observations delayed" and an age in the
millions of minutes. Frame ages, the delayed status and the stale stat
now count from the timeline time at a past time, and from now while
live, as before. The observed timeline's readout and preview show the
time alone at a past time, since its age from the timeline time is
always zero.
The wind card noted that it does not follow the timeline whenever the
observed clock was at a past time, even when a host follows the world
clock for wind. The weather clock now reports whether a layer follows the world
clock (weatherClock.follows(id), the world clock's follows), and the
wind row and card drop that note when its source follows the timeline.
- World timeline: a scrub counts as at now within a share of the track
(0.5%), now held to at most two minutes. A layer whose source covers
years made the window weeks wide, so most of the last month snapped to
live. Short tracks keep their window.
- Fires: card and detail ages count back from the end of the 24 hours the
layer shows when its snapshot ends at a set time, and from now only when
it runs to now. A window that ended months ago read "new 105d" on fires
three hours old at the time shown.
- Weather: a product's max gap and the delay after which its latest frame
reads late are at least one and a half of its feed's median frame
spacing (over its latest frames). A regional cloud feed with frames an
hour apart drew nothing for the second half of every hour while
scrubbing and read late after twenty minutes; feeds with frames minutes
apart keep their gaps.
The zoomed track now drags: the handle still drags the time, while the
track around it drags the view along (or the time, with all of it shown),
a tap goes to the time under it, two fingers pinch it, and a sideways swipe
or a shift-wheel drags it too, the same with a mouse, a trackpad or a
finger. A view dragged off the handle stays put until the time moves.
Play moved in steps: the world clock told of its time four times a second,
so the handle and the globe jumped, and play stopped at every weather frame
while it drew, loaded ahead or not. The clock now tells of its time each
animation frame, and play no longer waits on the frame it is at: that
frame loads as play goes on, and play holds only at the next frame while
the one before it still loads. Weather loads its next frame ahead while the
world plays too, tells its listeners of frames as they change rather than
every frame, and the sun and moon move on each minute of world time.
Play no longer runs ahead of the data. The world clock gains a wait, which
holds continuous play where it is while a layer loads what the time needs,
and a gate, which keeps play from passing a time a layer has yet to load.
Weather gates play at its next frame and waits there until the frame shows,
so every frame is seen however fast play runs; it waits no more than eight
seconds on a frame that never comes, and takes a wait only when its frames
change. Play pressed while a frame loads waits for it too. A scrub still
drops what loads and moves on.
The bar loses its long date and the dates at its ends: the time rides in a
bubble over the handle, which pulses while play waits, and the bar runs
left to right in every language. Play starts at real time.
The bar now needs more than the world clock being away from live: a layer
that moves with the clock must be on with time to show. In Core that is
weather radar, satellite or lightning with frames; a host adds layers by
following them. Turning the last one off hides the bar; turning it back
on brings it back.
The world clock reports this as `supported` in its state. Weather products
register their frames as coverage one by one, suspended or not, so the way
back to live stays on screen with reduced motion. Weather refreshes and
satellite catalog changes tell the clock their coverage may have changed.
A coverage that throws counts as none, and the clock reads its state once
per notification round.
Core told time eight ways: Date.now() in most layers, JulianDate.now() for
flights and military, Cesium's clock frozen at page load for the sky, the
weather clock for observed imagery. They now read one clock,
src/time/worldClock.js, exported as ./time.
Live is a mode, not a timestamp: while live the clock is the wall clock,
so every layer draws as before. Away from live only the layers that follow
the clock move with it. The weather products follow it, as they followed
the weather transport; a host opts others in with follow(id).
- The weather clock takes its time from the world clock and drives its
replay, stepping its frames as before.
- Satellites, launches, flights and military (still 30 s and 15 s behind),
transit, GNSS, Recent Imagery, street level, the HUD and the celestial
ring read worldTimeFor(id). Cadences stay on the wall clock.
- Cesium's sky (stars, sun, moon, atmosphere, lighting) draws at the world
time each frame instead of the moment the page loaded.
- Weather frames and satellites declare coverage() for a host's timeline.
Wind (NOAA GFS and ECMWF IFS: animated particles, colour field, a reading at map centre), observed weather (NOAA MRMS radar, GOES and NESDIS infrared clouds, lightning density) on one shared history timeline, NHC and CPHC cyclone advisories with tracks and cones, and a WEATHER panel in the right rail. On 3D Tiles the observed products render as raised shells with a sharper window around the view.
Co-authored-by: Gustavo Beneduzi <[email protected]>
Co-authored-by: Daniel Slay <[email protected]>
Co-authored-by: Rehaan Delmotra <[email protected]>
Co-authored-by: Cursor Agent <[email protected]>