NYC DOT asks developers who use its camera feed to sign a data-sharing
agreement, and this project does not hold one that covers downstream
installs. The pack now loads only when CCTV_NYC_ENABLED=1; unset, empty
or any other value makes no request to webcams.nyctmc.org (tested).
The NYC credit carries NYC DOT's requested application disclaimer
verbatim, and DATA_SOURCES, README, CHANGELOG, CURRENT-STATE and
.env.example describe the prerequisite.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- One provider is lit at a time: lighting a chip darkens the others, and a
chip click records every registered provider's switch in one update so
the share link keeps the swap (also off Google 3D, where Street View is
not listed). The layer starts with the first default-on provider
(Mapillary, free); params that light several keep the one already on,
so reapplying them never flips (litByParams). The now-unreachable
"several lit" chip paths are gone.
- Leaving Google 3D during a Street View lookup ends it without an error
or a stuck loading state (openImage's early return resets it; the
lookup loop rechecks availability).
- A source swap during a lookup no longer reports "no imagery".
- Street View lit off Google 3D says the panel needs the Google 3D map.
- Comments trimmed to the why; keySetupCore.test.mjs back to upstream's
formatting plus the one new test (was a 551-line reformat).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- The chip reads GOOGLE STREET VIEW (and its caption link likewise).
- Providers declare the imagery filters they honour (`filters`, default
pano + since). Street View declares none: every panorama is 360° and it
draws no coverage to thin, so its lookups ignore the filters and the
panel hides IMAGERY and SINCE while it is the only lit provider.
- The legend lists only providers that draw coverage lines, with
Selected only beside one: Street View alone shows no legend.
- Providers may pick their on-globe marker (`marker`); Street View's is a
Google-blue field-of-view cone from a white-ringed dot, in place of
GEV's amber pin, and switches back for a Mapillary photo.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Register the keyless webcams.nyctmc.org catalog as a live CCTV source,
synthesize frame URLs from validated camera UUIDs, and keep the nearest
cameras to the five borough cores under the existing catalog ceiling.
Conflicts with upstream's Street Level provider composition and share-state
codec, resolved:
- Street View's switch moves from its own share option (`g`) to upstream's
provider-switch field (`r`, e.g. `0.r.google-1`); a link without it keeps
Street View off. Docs and the browser gate follow.
- createApplicationStreetLevel keeps upstream's injectable provider list;
its default, once the application supplies its Street Level source, is
Mapillary plus Google Street View. Without that source there are none, as
upstream intends.
- The coverage hint keeps upstream's empty-composition message and joins
every switched-on provider's hint otherwise.
- CHANGELOG, README and SECURITY keep both sides' entries.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Review of #966: with a Google Maps key but no Mapillary token, switching
Street Level on read KEY REQUIRED / "Needs MAPILLARY_CLIENT_TOKEN" with
nothing about Street View, which stayed off (billing), so the layer looked
broken.
- While the switched-on providers lack their keys, the layer reports the
switched-off ones that would draw with a key already set
(keyAlternatives: Street View on Google 3D with a Google key). The
panel's KEY REQUIRED tooltip, its coverage line and the layer row's
tooltip then read "Needs MAPILLARY_CLIENT_TOKEN — add it in Provider
Settings, or light STREET VIEW to use your Google Maps key"
(keySetupWithAlternatives). Off Google 3D the plain KEY REQUIRED stays.
Street View stays off by default.
- OPEN STREET VIEW moves beside the coverage hint: at the default panel
width the PROVIDERS row has no room for it, so it wrapped onto a line of
its own.
- The panel gate's corner drag names what lay under the pointer when it
fails.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Maintainer follow-up to #966 review:
- A failed panorama-details lookup now waits DETAILS_RETRY_COOLDOWN_MS
(5 s) per panorama before a view event can retry it, so dragging the
view after a failure no longer issues a lookup on every pov change. A
success clears the pause; one panorama's failure does not delay another.
- SECURITY.md notes that allowing maps.googleapis.com in script-src also
trusts its JSONP endpoints, an accepted limitation alongside the
existing 'unsafe-eval' allowance.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- OPEN STREET VIEW in the PROVIDERS row opens Street View's nearest
panorama at the ground under the middle of the screen, without moving
the camera: Street View no longer needs a pointer. It is disabled (and
says so) until the camera is at street zoom.
- Off the Google 3D map Street View does not appear at all: no chip,
legend swatch, globe credit, layer source or button, and Google's script
is not loaded (the viewer has no prewarm; the script loads on first use).
The share option keeps the user's choice for when Google 3D returns.
- A ground click measures the camera height at the click rather than
reading the cached flag.
- A chip without a usable key explains it instead of lighting; it darkens
beside a lit chip, and the other chips keep switching, so a refused
Street View key cannot lock Mapillary out.
- The gate checks that nothing of Street View shows off Google 3D even when
a share link switches it on, presses OPEN STREET VIEW on Google 3D, and
asserts that each chip it switches really switched.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Google's Maps Platform terms forbid Street View imagery beside non-Google
maps, so the provider declares requiresMapStack: 'photoreal': off Google
3D its chip is dashed with the reason, lookups and opens skip it, and
leaving Google 3D closes its panorama.
- Ground clicks: only a click on the map itself (scenePick.isSurfacePick:
nothing picked or Google 3D tile content) at street zoom opens Street
View, and the camera stays put; higher up the hint says to zoom in.
scenePick.pickGroundPosition replaces the copy in Directions.
- Viewer: poses go out at once and again when the date and address
arrive, so an open never hangs on that lookup; one lookup per panorama,
seeded by the nearest lookup; a close settles a pending open; failed
lookups are asked again; poses follow position changes, not pano_changed.
- Loader: the gm_authFailure handler is installed once, so a retried load
reports a refusal once.
- Viewer host: a prewarm that lands after another provider took the host
is released; FIT/FILL availability is set on every open.
- Provider: a refusal while switched off reports no error over another
photo; SINCE compares against the end of Google's month; messages name
the referrer and network causes; FLAT says Street View is 360° only.
- The layer row names the key of the providers that are on; the MCP panel
CSP admits Street View's tiles, control images and photos.
- Tests for each, against fakes that now follow Google's event order; the
browser gate restores its state, waits instead of sleeping, aims its
panel clicks and corner drags, and asserts the camera stays put.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Google Street View registers beside Mapillary as provider `google`. It runs
on the Maps JavaScript API with the browser GOOGLE_MAPS_API_KEY, loaded on
first use (mapsLoader.js), and uses Google's own StreetViewPanorama as its
viewer adapter, emitting provider-neutral poses (address and month in the
caption, a link to Google Maps, steps along Google's arrows, FOLLOW on
Google 3D). Its chip starts off because every panorama is billed to the
key; the share option is `g`.
Google offers no coverage layer for other maps, so the provider draws
none: with it on, a click on bare ground at street zoom opens its nearest
Google-collected outdoor panorama (groundClick.js). A key Google refuses
reads KEY REJECTED and fails a pending open at once; a lookup Google never
answers fails after 10 s.
Core: providers may declare `groundClick` and `defaultOn`; poses may carry
`capturedAtPrecision` and `title`; the coverage line keeps every
provider's hint; opening one provider's image releases another's
prewarmed viewer; FIT/FILL hides for viewers without render modes. CSP
script-src admits https://maps.googleapis.com. The browser gate gains two
Street View steps (the keyed one skips as 'no Google key' in CI).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- A photo takes a deferred navigation ticket when it starts opening
(begin/reassert, the application's _beginDeferredNavigation and
_reassertNavigationHandoff) and frames only if that ticket still owns
the camera once loaded, so a slow photo no longer flies the camera back
over newer navigation or clears newer aircraft tracking.
- A failed mesh refresh keeps the last good sample and the distance it was
taken from, and is retried after the miss cooldown, instead of recording
the failed distance and never refreshing again.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Photo framing and FOLLOW claim the camera through the application's
navigation, injected with attachNavigation({ run, subscribeHandoff }):
aircraft and satellite tracking is released first, the cockpit refuses,
and FOLLOW stops when another feature takes the camera. No UI imports
in the layer.
- The mesh sampler follows the mesh floor's rules: it waits for the
visible tileset to finish streaming (visibleTilesetLoaded, now exposed
by the mesh floor service), needs a real bare-earth prior and keeps to
the shared meshFloorSampleWithinPrior window, which cameraFollow now
uses too. A cell is probed again once the camera is half as far from
it (down to 40 m), so a coarse early sample is replaced and redrawn.
- The MCP globe panel's CSP allows the Mapillary Graph API and its image
CDN (https://*.xx.fbcdn.net).
- The tile proxy reads bodies with the shared readResponseBytesCapped.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Trim the doc text this PR adds (README, CHANGELOG, CURRENT-STATE,
KNOWN-ISSUES, SECURITY, DATA_SOURCES, .env.example, the CI job comment),
drop code comments that restate the code, cut design-note JSDoc to a line
or two, and drop review tags from test names. Comments only; no code
changes.
Also: README key count (seven keys, two metered), CURRENT-STATE's gate
paragraph (CI runs a production build with a dummy token), the stacked
doc above meshBoxInRange and the orphaned inMeshRange line in
coverage.js, and a duplicate ALPR row in DATA_SOURCES that a merge had
brought back.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
From gekh's review of #768, each with a test that fails before:
- P2: the panel no longer reopens on every page load. The shell reports
who asked for Street Level to switch on; only a user, voice or tool
request (isExplicitLayerStateOrigin) or an opening photo opens it, and
those automatic opens are never stored. Without the hook, a stored or
shared "collapsed" choice wins during the restore window.
- P2: the expanded photo hides in Clean View, recording and the cockpit,
and holds neither Esc nor Tab while hidden.
- Esc/Tab are taken only from the viewer, body or globe, not app-wide;
FIT/FILL show the right choice while expanded; a 0x0 viewer is never
resized (no z=NaN tile request); the expanded viewer keeps the panel's
CSS tokens; KEY REQUIRED hides the raw "no_key" code.
- Share links carry the panel's collapsed state (ui token t); the Cyber
theme frames the panel like its rail peers (the pinned Cyber selector
tests now list it).
- Accessibility: radiogroups move with arrow keys and are one tab stop,
their focus ring is no longer clipped, and the provider chips sit
outside the disabled fieldset so the "how to add the key" hint stays
reachable (a gated chip explains instead of toggling).
- Renders write only changed attributes (the rail's MutationObserver
relaid out on every write); one coalesced resize per open; the legacy
render-mode key migration is gone.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Said Turksever