Keyless GTFS-Realtime feed from Carris Metropolitana, documented in the
operator's public API repository. No licence is stated for the realtime
endpoint (the static GTFS is CC BY 4.0), so it is credited as a courtesy on
the same basis as the Metro Transit and OVapi feeds. The feed publishes km/h,
so a new `speedUnit` registry field lets the proxy convert to m/s. Route ids
wrap the GTFS route id in an area prefix and are read as the line number.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Keyless GTFS-Realtime feed published by ZDiTM Szczecin under CC0 1.0.
Speeds are m/s (checked against vehicle movement), the file refreshes about
every 20 s, and the feed carries no route ids, so vehicles take the default
bus mode.
Co-Authored-By: Claude Sonnet 5.5 <[email protected]>
Name each Rio feed in its credit instead of repeating the licence, drop the
deprecation history from the bus note, list Rio among the feeds with a
route-name table, and shorten the route-table header and test comments.
Both SMTR feeds now publish Position.speed in m/s. Compared with how far
vehicles moved between reports on 2026-11-05, the published values ran
3.1x (buses) and 3.6x (BRT) below the observed speed, so the km/h
conversion divided real speeds by 3.6. Drop speedUnit and the conversion.
SMTR's realtime feeds carry internal route keys, so a Rio card read
"Route O0731AAN0A" where riders know line SN731. Join both feeds to the
route_short_name in SMTR's static GTFS routes.txt (CC BY 4.0, same
publisher and terms). The keys cannot be parsed: O0014AAA0A is LECD135.
A 2026-11-04 snapshot found all 282 bus and 21 BRT routes in service in
the table; an unknown key still falls through raw.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Resolves the DATA_SOURCES.md conflict by keeping main's rewritten Transit
and Radio bullets and restating the count for this branch: eighteen feeds
covering seventeen regions (the two Rio feeds share one region).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The streamed oversized body was invalid JSON, so the loader returned
nothing whether or not the byte cap applied. Pad a valid catalog with a
usable camera instead, so only the cap can refuse it.
TranStar's Content Usage terms prohibit copying, distribution and
external framing of its images without TxDOT's prior written
permission. The opt-in text only said the pack was off unless
CCTV_HOUSTON_ENABLED=1, without saying what an operator needs before
setting it. Say "enable only if you hold TxDOT's written permission" in
.env.example, the README, DATA_SOURCES.md, CURRENT-STATE and the
changelog, matching the NYC and Florida packs, and fix the column of the
.env.example comment.
The houston-cctv credit now reads "(Houston, when enabled)" and links
the Content Usage terms, like the Florida credit. Where the docs said
frames are "never stored or redistributed", they now say what happens:
frames are relayed on demand, buffered only per request, sent with
no-store and not archived.
TranStar's `dir` field is the side of the freeway a camera sits on, not
the way it faces. TranStar's own map script (translateCameraDirection)
shows it as "Traffic closest to the camera is traveling": South is
eastbound, North westbound, West southbound and anything else
northbound. The live catalog agrees: I-10 cameras are North/South and
I-45 cameras East/West.
Treating `dir` as a high-confidence facing pointed most Houston cameras
across or away from the road they watch, and dropped the "estimated"
marking. Map it to the travel direction instead (S 90, N 270, W 180,
E 0) as a low-confidence prior with the low-confidence pose, and keep
the id-hash fallback for None or unknown values.
A foreign Origin or Sec-Fetch-Site: cross-site request was answered and
counted against the client's 60-a-minute quota, and could start a refresh.
Run the keyless same-site checks the other map routes use before rate
limiting and cache acquisition; reverse-proxy forwarding headers stay
accepted. List the route with the keyless map routes in SECURITY.md.
The source dropped the proxy's stale flag and fetch time, so the layer row
read nominal and freshly updated through an outage, and the proxy served its
last snapshot indefinitely. Carry stale and fetchedAt through the source as
Fire Perimeters does, date a stale snapshot by its fetch, and stop serving a
snapshot more than 24 hours old.
An upstream answer whose zones all fail validation normalized to an empty
list, and paging that stopped at the page limit while the service still
flagged more records was accepted as complete. Both were cached as a fresh
snapshot for an hour and replaced the last good one. Treat them as failed
refreshes so stale-on-error keeps serving the previous snapshot.
The heatmap now takes over above 4,500 km instead of 3,000 km, with
the cross-fade between 3,600 and 5,400 km. The markers band caps at
40,000 detections, which covers the ~40,000 in the padded view over
Africa at the low end of the fade, so weak fires still stay as markers.
To keep that rebuild near its old cost, markers outside the close band
read the anchor already built for each fire instead of the ground floor
cache: only the close band warms floors, so the lookup there always
missed. A 40,000-marker rebuild now costs ~55 ms, down from ~120 ms.
Review follow-ups for the sonar pulses.
Wake on user input only: a camera move wakes the pulses only within
1.5 s of a pointer, wheel or touch on the Cesium canvas, where its
camera controller listens. Tracking, the cockpit view, an orbit or a
fly-to move the camera on every frame and no longer keep the pulses
running. Keys don't count: the camera controller reads none.
Below the disc: with the camera under 2.5 km the pulses rest
completely, with no disc, ring flash, echoes or frame requests.
Echo brightness: echoes scale by the contact bracket's drawn alpha,
which includes the Cyber sonar sweep, rounded to the nearest band with
no floor, so an echo is never brighter than its bracket.
Disc follow: the pulse disc follows the subject by a model-matrix
rotation about the Earth's centre and is rebuilt only every 20 km
instead of every 500 m.
Tests: a cap on burst length; teardown through disable(); the echo's
spread and alpha on the canvas; echoes under the Cyber sonar never
brighter than their bracket; waking by pointer, wheel, touch and drag
but not by keys, app camera moves or stale input; the rest below the
disc; and tighter asserts. CURRENT-STATE notes that terrain above
2.5 km still cuts through the disc and ring.
Each resolve() that raced the caller's signal added an abort listener and
never removed it, so a long-lived signal collected one listener per
completed lookup. The listener is now removed when the call settles and
is not added at all to a signal that is already aborted.
resolve_area compared the spoken name with the unit's name literally, so
"State of Texas" (admin1) and "USA" or "UK" (country) were refused with
AREA_IDENTITY_MISMATCH although the bundled matcher found exactly those
units. Both identity checks, the bundled one and the outline ladder's, now
also accept the prefix forms and same-unit country aliases the matcher
reads, at the level they imply, so the level check still applies.
"Great Britain", "Britain", "America" and "Korea" still need their own
names, and the natural-region check stays literal.
osm_query said "At least N" when the server capped its list, but handed
the places to the analyst engine with truncated:false, so "which of those
have emergency?" answered as if the list were whole. The handoff now
carries the cap and its caveat, and follow-ups (and their follow-ups)
stay incomplete with an unknown total.
The far-zoom heatmap now uses the ½× grid (4096 × 2048, ≈10 km per
pixel, one-pixel blur), so a lone fire's spot matches its marker at the
3,000 km hand-off. The spot size slider and its share option are gone.
Markers and heatmap are both kept built at every zoom and cross-fade by
camera height between 2,400 and 3,600 km on every frame, so a fast zoom
never shows a beat with neither. The heatmap fades by imagery alpha:
hiding a Cesium imagery layer unmaps it from the globe tiles, and showing
it again re-mapped them late, which was the gap at the band edge. Under
the markers the heatmap is built 150 ms after the data or filter changes.
The detection overlay asked the echo field for every visible flight,
military aircraft and vessel on every frame while a subject was
selected, projecting each to the ground before learning the pulses were
resting. It now checks awarenessEchoActive once per frame and builds no
echo paths at rest, and awarenessEchoAt checks the level before the
projection.
A detectionHost test with six echo-eligible flights checks that a
resting frame asks for the level fewer times than there are contacts
and paints no echo; it fails on the per-contact path.
The pulse and echo policy doc comments are attached to their constants
again, and one long comment line is re-wrapped.
Remaining review follow-ups for the sonar pulses.
No self-echo: pulses are born 5 km out (startFraction of the radius),
but contacts nearer than that, the subject included, still lit on every
pulse birth. They now never echo. Just past the birth ring, an echo is
scaled with the front's own fade-in, so a bracket no longer flashes
before a visible front reaches it. The ring flash at the full radius is
unchanged.
Older Safari: the reduced-motion listener falls back to the media
query's addListener / removeListener when addEventListener is missing,
as other modules here already do.
Echo wiring test: a detectionHost test now paints through the real
detection lane with an echo field set, and checks the echo stroke takes
the echo colour on the default style and each style's line colour under
CRT, NVG and FLIR. CURRENT-STATE notes the 5 km no-echo zone.
Review follow-up for the sonar pulses (the non-blocking items).
Unpickable pulses: the three pulse lines were polyline entities, which
Cesium always picks, so near-miss and touch picks around them became
unowned hits. They are now drawn by the pulse disc's shader, which
already drew the gradient and is built with allowPicking false. Each
line keeps the polyline outline material's look: 3 CSS px wide with a
1 px dark outline in the ring's colours, measured from the screen-space
gradient of the disc's radius times czm_pixelRatio, as Cesium's contour
material does. Without derivatives only the gradient band is drawn.
Disc follow: with the lines on the disc, it is rebuilt after the subject
moves 500 m instead of 2 km, so the pulses stay concentric with the
ring. A resting disc is hidden and not rebuilt; it catches up when the
pulses wake.
Camera below the disc: the disc sits 2.5 km above the ellipsoid with
faceForward, so from a lower camera it swept across the sky. It is now
hidden while the camera is below that height.
Echo palette: echo brackets keep the pulse blue on the default
detection style and take the style's line colour under NVG, FLIR and
CRT.
Echo test: the detection renderer's echo maths moves into
awarenessEchoBracket and awarenessEchoColor in src/awarenessEcho.js,
tested directly instead of running a regex slice of detection.js
through vm, and the one-sided spread assert is now two-sided.
The positions reuse parameter of awarenessRangeRingPositions and the
pulse segment count had no callers left and are removed.
From review: a row inside a large area pays a ray cast over every edge, so
20,000 rows against a 6,000-vertex outline made ~200 ms long tasks. The scan
now also yields once ~8 ms have passed, checked every 256 rows. An ambiguous
region refusal also tells the model the way back: resolve_area with the
picked candidateId, then analyst_query over that area.
From review:
- An answer the view picked ("Springfield" over Illinois) is reused or
shared only within the same ~2° view cell, so asking again elsewhere no
longer gets the first state's area.
- Admin names compare with accents folded on Latin letters only: "Quebec"
matches "Québec" and "Cordoba" asks between Argentina and Spain, while a
Thai or Devanagari mark still tells names apart.
- A Natural Earth name used by several features is one place with every
part when they touch (the Great Rift Valley, the Lau Group across 180°)
and a question when they are far apart (Flores); natural places can now
be candidates.
- The AREAS rule and the area tool descriptions are tighter, leaving a
~270-character margin under the 55,500 prompt ceiling, and resolve_area
no longer names osm_query when that tool is not offered.
Three resolver fixes from checking the review focus:
- A natural region named like a country or state no longer hides it.
"India" was the peninsula, "Japan" an island group, "Florida" the
peninsula and "Punjab" a desert, so bare "Punjab" never asked which one.
The region still answers when asked for by level, and when no unit truly
has the name ("Great Britain" finds the United Kingdom only by alias).
- Same-named units get their own candidate: "Washington" offered WA and DC
with one id, so either choice was DC and a DC lookup overwrote a stored
Washington State. Ids now carry the region code, and choices show it.
- A bundled unit that only shares the name ("Azad Kashmir" for "Kashmir")
no longer ends the search; the outline ladder still looks, and the
mismatch is kept if it finds nothing. Retired zones stay refused.
osm_query handed its places to the analyst with no presentation, so "which of
those have emergency?" after "hospitals in Kathmandu" was answered as "anywhere
in the loaded data". The handoff now carries the scope the places were found
in ("inside Kathmandu" with its areaId, or "in view"), as an analyst count over
that area would.
Picks up the Radio Next/Previous fix (#1474) and the Codespaces docs
(#1515). The one conflict is the Radio cycle assertion in
gevActions.test.mjs: main's new fallback flag is kept in this branch's
layout.
Pulses: three dim rings grow from the Global Context subject to the
250 km range ring at constant speed, one every 3 s, each taking 9 s.
Each fades in over its first 8% of travel, then fades as
(1 - travel)^1.5 to about a third of its 60% peak, so it arrives at the
ring dim but visible. They are 3 px in the ring's colours, as polylines
with CallbackProperty positions and colours that share the ring's
centre object, so they follow a moving subject.
Ring: while pulses run, the 250 km ring rests unseen and flashes to full
strength as each pulse reaches it, fading over 1.8 s. Without pulses
(reduced motion, or a scene with no primitives or preRender hook) it
stays on screen as before.
Gradient: behind each pulse a radial band in the same blue fades inward
over 35% of the radius. One flat, translucent, unpickable 250 km disc
draws it with a small Fabric material. A preRender listener writes the
pulse radii and opacities into two vec4 uniforms each frame. The disc
(0.25 degree granularity, ~3.5 ms to build) is rebuilt only after the
subject moves 2 km.
Echoes: as a pulse front crosses a flight, military aircraft or AIS
vessel, the detection overlay draws a second bracket in the pulse blue
around that contact's own bracket, spreading outward as it fades over
1.4 s. Awareness publishes the field (centre, radius, pulse timing,
echo styling) through the new src/awarenessEcho.js. The overlay reads
it, so no layer's icon or colour is touched. Mapped installations have
no detection bracket, so they do not echo.
Rendering cost: pulses never hold continuous rendering. They ask for a
frame every 80 ms, the Cyber sonar's parked cadence, so a parked
Contacts view repaints at ~12.5 fps while a subject is shown. This
changes the "parked Contacts stays quiet" behaviour on purpose.
clearVisual stops the timer and removes the disc, the listener and the
echo field.
awarenessRangeRingPositions can now reuse a result array, and passes the
WGS84 ellipsoid explicitly so a reused Cartesian never lands in the
ellipsoid argument. Tuning lives in AWARENESS_RANGE_PULSE,
AWARENESS_RANGE_ECHO and AWARENESS_RANGE_RING_STYLE. src/awarenessEcho.js
is registered in the awareness-layer, application-components and
application-layer-construction packages.
Tests cover:
- the pulse curve and calm rate;
- the ring flash once per arrival, and the static ring without pulses;
- the 80 ms frame cadence and its stop;
- the partial-scene fallback;
- the gradient disc: unpickable, uniform values, rebuild and cleanup;
- per-frame evaluation, and the echo field following the subject;
- awarenessEcho strength, rim wrap, layer filter and altitude handling;
- the detection renderer's echo-bracket band and outward spread.