Keyless GTFS-Realtime feed from Carris Metropolitana, documented in the
operator's public API repository. No licence is stated for the realtime
endpoint (the static GTFS is CC BY 4.0), so it is credited as a courtesy on
the same basis as the Metro Transit and OVapi feeds. The feed publishes km/h,
so a new `speedUnit` registry field lets the proxy convert to m/s. Route ids
wrap the GTFS route id in an area prefix and are read as the line number.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Keyless GTFS-Realtime feed published by ZDiTM Szczecin under CC0 1.0.
Speeds are m/s (checked against vehicle movement), the file refreshes about
every 20 s, and the feed carries no route ids, so vehicles take the default
bus mode.
Co-Authored-By: Claude Sonnet 5.5 <[email protected]>
Both SMTR feeds now publish Position.speed in m/s. Compared with how far
vehicles moved between reports on 2026-11-05, the published values ran
3.1x (buses) and 3.6x (BRT) below the observed speed, so the km/h
conversion divided real speeds by 3.6. Drop speedUnit and the conversion.
SMTR's realtime feeds carry internal route keys, so a Rio card read
"Route O0731AAN0A" where riders know line SN731. Join both feeds to the
route_short_name in SMTR's static GTFS routes.txt (CC BY 4.0, same
publisher and terms). The keys cannot be parsed: O0014AAA0A is LECD135.
A 2026-11-04 snapshot found all 282 bus and 21 BRT routes in service in
the table; an unknown key still falls through raw.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Resolves the DATA_SOURCES.md conflict by keeping main's rewritten Transit
and Radio bullets and restating the count for this branch: eighteen feeds
covering seventeen regions (the two Rio feeds share one region).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
TranStar's Content Usage terms prohibit copying, distribution and
external framing of its images without TxDOT's prior written
permission. The opt-in text only said the pack was off unless
CCTV_HOUSTON_ENABLED=1, without saying what an operator needs before
setting it. Say "enable only if you hold TxDOT's written permission" in
.env.example, the README, DATA_SOURCES.md, CURRENT-STATE and the
changelog, matching the NYC and Florida packs, and fix the column of the
.env.example comment.
The houston-cctv credit now reads "(Houston, when enabled)" and links
the Content Usage terms, like the Florida credit. Where the docs said
frames are "never stored or redistributed", they now say what happens:
frames are relayed on demand, buffered only per request, sent with
no-store and not archived.
TranStar's `dir` field is the side of the freeway a camera sits on, not
the way it faces. TranStar's own map script (translateCameraDirection)
shows it as "Traffic closest to the camera is traveling": South is
eastbound, North westbound, West southbound and anything else
northbound. The live catalog agrees: I-10 cameras are North/South and
I-45 cameras East/West.
Treating `dir` as a high-confidence facing pointed most Houston cameras
across or away from the road they watch, and dropped the "estimated"
marking. Map it to the travel direction instead (S 90, N 270, W 180,
E 0) as a low-confidence prior with the low-confidence pose, and keep
the id-hash fallback for None or unknown values.
The changelog fragment named share-link token 6 (sea marks); the layer
reserves 8. CURRENT-STATE said voice could toggle and query the layer and
listed it among the analyst record sources, but it is in VOICE_OFF_LAYERS.
Say voice is off for now, and that the layer covers FAA prohibited and
restricted special-use airspace only, not the UAS Facility Map / LAANC grids
or TFRs. A test pins these claims to the token ledger and the voice manifest.
The heatmap now takes over above 4,500 km instead of 3,000 km, with
the cross-fade between 3,600 and 5,400 km. The markers band caps at
40,000 detections, which covers the ~40,000 in the padded view over
Africa at the low end of the fade, so weak fires still stay as markers.
To keep that rebuild near its old cost, markers outside the close band
read the anchor already built for each fire instead of the ground floor
cache: only the close band warms floors, so the lookup there always
missed. A 40,000-marker rebuild now costs ~55 ms, down from ~120 ms.
The 750–3,000 km markers band now draws up to 20,000 detections instead
of 2,500. At the 2,400 km end of the cross-fade the padded view over
Africa holds ~21,000 fires, and the old cap kept only those above
~17 MW, so most heat spots faded into empty ground as the heatmap went
out. A rebuild of that many costs ~60 ms, and only in the densest views.
The far-zoom heatmap now uses the ½× grid (4096 × 2048, ≈10 km per
pixel, one-pixel blur), so a lone fire's spot matches its marker at the
3,000 km hand-off. The spot size slider and its share option are gone.
Markers and heatmap are both kept built at every zoom and cross-fade by
camera height between 2,400 and 3,600 km on every frame, so a fast zoom
never shows a beat with neither. The heatmap fades by imagery alpha:
hiding a Cesium imagery layer unmaps it from the globe tiles, and showing
it again re-mapped them late, which was the gap at the band edge. Under
the markers the heatmap is built 150 ms after the data or filter changes.
Typed chat sessions no longer end on the voice inactivity timeout, and a
failed or stopped reply keeps the conversation: Stop cancels only the
reply in progress, and map actions that already ran stay in the model's
context. Each upstream request and map action gets its own deadline, old
tool results shrink instead of the history overflowing, and step limits,
a missing or rejected key, the OAuth lock and throttling each get their
own message.
- Server: OpenAI chat is off under GEV_PREFER_CODEX_OAUTH; chat throttles
default to the provider's throttle; replies carry API_KEY_MISSING,
API_KEY_REJECTED, CODEX_OAUTH_REQUIRED and RATE_LIMITED codes; upstream
Retry-After passes through, and a rejected key (Gemini's invalid-key 400
included) cools down for a minute
- Pinokio forwards the chat throttle settings
- UI: the reply reveal publishes only the message list; the border orbit
runs only while busy; layers attach with a button or Enter; the log is
aria-busy while a reply types out; auto-scroll respects a reader who
scrolled up; Escape closes the attach menu; the chat gear says Settings;
a note says chat bills the OpenAI key when voice uses ChatGPT sign-in
- Layout does less work while panel height animates; unused blurs removed
- Gemini voice start ends chat; the voice preview clears on every new
session
- Tests for the route gates, client limits, attachments and the fixes
