A Director hold longer than the settle check's five-minute bound used
to expire the deferred check, so a run that ended on a stars-only shot
after a long hold stayed there until the next move. While a flight or a
playing scene defers the check, its bound no longer counts down; the
flight or scene bounds the deferral itself.
Also correct the trackball note in CURRENT-STATE: Cesium's tilt tests
the screen centre, so any tilt (drag or touch) with the centre on the
stars between 1,000 and 7,500 km now tilts about the planet's edge or
does nothing, wherever it starts. Rotation drags that start on the
planet are unchanged.
A check skipped because a flight or a playing Director scene was in
progress used to be dropped, so a run that ended or held on a stars-only
shot stayed there until the next camera move. Keep watching instead:
the settle check retries once the flight or scene ends, within its
existing five-minute bound, and a moveEnd that arrives while it is
deferred keeps the check armed rather than stopping it.
Also test that the free-look limit never raises Cesium's trackball
height and that dispose keeps a value set after install, note in its
JSDoc the enableLook case it cannot tell apart, and document the
trackball change and the retry in CURRENT-STATE and the changelog.
Below Cesium's trackball height (7,500 km by default) a drag that starts
on the stars turns the camera in place, whatever enableLook says, which
was the drag path to a view with no planet in it. Lower that height to
the free-look height with the free-look limit, never raising it, and
restore it on dispose. Above 1,000 km such a drag now orbits the globe,
as it already did above 7,500 km, at a similar rate, and a tilt drag
from the stars there tilts about the planet's edge or does nothing
instead of turning the camera. Drags that start on the planet are
unchanged.
Review follow-ups for the globe-in-view recovery and voice limits.
- Leave a camera flight in progress and a playing Director scene, holds
included, to their own framing. The recovery is now installed with the
scene tools, which own the Director, and reads its running state.
- Reuse a voice turn's half-degree proof only from the position and
direction it was proven at, so a release that moves the camera checks
the turn again.
- Share one free-globe-camera check between the recovery, the voice
turn limit and the globe rotation.
- Keep an enableLook setting other code makes after the free-look limit
is installed, instead of writing back the install-time value.
- Name the nudging test for what it asserts, the 1% floor, and document
that a view losing its surface without a camera move waits for the
next one.
- A tilt's angle, limits and "unchanged" check use the camera's own
pitch. At regional range the pivot pitch is up to about 8 degrees
shallower, so "tilt to 5 degrees" from 900 km ended at -12.9 degrees.
The swing now solves for the pivot pitch that gives the camera angle.
- A zoom out during a pivoting tilt stops at the 1,000 km pivot limit
instead of the orbit's 5,000 km, and a zoom in that reaches the
clearance is applied before the pivot ends.
- An angle the camera already holds still takes navigation, so it stops
a running motion and releases the follow camera.
- A motion queued behind a fly-to moves to a newer fly-to as soon as it
begins, so a stalled lookup no longer holds it past a flight that
landed. Wait listeners are removed when a wait ends, and a lookup that
found nothing points straight at the flight that moved.
- A fly-to that stops a running motion names it (stoppedMotion).
- A tilt left or right is refused, and the pitchDeg description says
steps use direction.
SMTR's realtime feeds carry internal route keys, so a Rio card read
"Route O0731AAN0A" where riders know line SN731. Join both feeds to the
route_short_name in SMTR's static GTFS routes.txt (CC BY 4.0, same
publisher and terms). The keys cannot be parsed: O0014AAA0A is LECD135.
A 2026-11-04 snapshot found all 282 bus and 21 BRT routes in service in
the table; an unknown key still falls through raw.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Cockpit entry no longer needs Contacts or both flight feeds: a civilian
aircraft needs Live Flights, a military one Military Flights. Contacts and
every other layer can be turned on or off before or during a session, and
turning off the ridden layer ends it. A Context mode change in flight still
blocks entry.
When the other air feed is off, Live Signals and the Contact card say
FLIGHTS FEED OFF or MILITARY FEED OFF · PARTIAL PICTURE instead of
presenting a partial picture as complete. Voice refuses entry with
subject-layer-off rather than contacts-inactive, and its tool description
says Contacts is not required.
Double-clicking the followed aircraft enters Cockpit through the same gate.
The Cockpit takes the scene's double-click before Cesium's stock handler,
which would otherwise untrack a followed aircraft whose model is a
primitive. The entry also shows under the Intel HUD readout, sharing the
Contacts button's face. A test keeps the classes the Cockpit adds to the
body from matching another element's rule.
Arabic catalog strings carry optional marks ("تتبّع"), but people type
without them, so "تتبع" found no suggestion. Fold the marks out of both
the draft and the candidates before comparing.
- Host test switches AI Provider from chat Settings through the real
provider commands and checks the new mount keeps chat's context, frame,
Back to chat and focus on the provider choice.
- Drop the open and minimized branches of the carried presentation: the
provider choice lives only in Settings, so chat is never open then.
- One showChatSettings helper for the gear and the restore, and one
isStoppable helper for the live-or-error check in chat and the panel close.
Split the Cockpit camera update into the aircraft's own front half and a
shared placeCamera that reads the eye's forward and up offsets, pitch and
ground clearance from a profile. The aircraft profile carries the existing
constants, so the aircraft view is unchanged; other subjects can now supply
their own eye.
Resolves the DATA_SOURCES.md conflict by keeping main's rewritten Transit
and Radio bullets and restating the count for this branch: eighteen feeds
covering seventeen regions (the two Rio feeds share one region).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Switching AI Provider in Settings opened from chat rebuilt the voice
control, so Settings fell back to voice and the dock went idle, widening
the wings. The switch now carries chat's Settings, or chat itself, to the
new provider as it already carries the input mode; the conversation still
starts fresh and focus stays on the provider choice.
After a voice error, opening chat or closing the voice panel left the dock
red on ERROR, because both stopped only an active session. They now also
end a session left in error, which returns the dock to idle.
The quick commands "Reset to globe view" and "Show earthquakes" reached t()
through a .map(), so the catalog check never saw them and every language
showed them in English. They are now marked with msg() and translated.
Review of the 71 strings from #1507 in all eleven languages:
- zh-Hant is regenerated from zh-CN with OpenCC s2tw, as its guide says;
40 entries had Taiwan vocabulary instead.
- ar "Dock to the right" names the left side, where RTL puts that rail.
- ja "What am I looking at?" no longer asks what the assistant sees.
- Provider Settings, dock, provider, live and map use each glossary's terms.
- de drops the du-form; ja drops spaces between Japanese and Latin text.
- Calques, register and the example commands read naturally.
A poll that returned the same stale snapshot dropped STALE from the
Contacts cohort until the next answer, because the in-flight loading flag
outranked stale and the source revision ignored the provider name. A
source that has answered now reads its status without the loading flag;
one that has never answered (AIS first connect) still reads as loading,
so it shows no STALE before any snapshot exists.
A new voice fly-to now records the last flight that moved as the one it replaced, landed or not; only a still-flying one passes on its manual-input count. A slow lookup cancelled by a direct flight that landed, followed by a lookup that found nothing, used to drop the queued motion, and a cancelled direct flight in the same place let it fall back to an older landing.
A motion queued behind a voice fly-to acts on the last flight that moved the camera. A later lookup that was not found, threw, or was cancelled once a newer voice fly-to had begun moved nothing, so the motion looks past it rather than refusing or running early and cancelling the flight still in the air. It never acts at a flight older than the one it started waiting on. A lookup cancelled while still the latest voice flight (a search, a share link, Cockpit) still refuses.
The top-down no-op now reports the camera's real pitch.
A motion queued behind a voice fly-to now follows a later fly-to in the same reply whether the earlier one arrived, was cancelled or failed. A geocode that loses navigation reports failed, so the motion used to be dropped; and a flight left flying while the next place is looked up could land and run the motion there, taking navigation and cancelling the newer flight. The deadline, abort and stale-reply checks still end the wait.
pitchDeg -90 or -89 from a top-down view is now unchanged rather than a 1° tilt up, and the tilt tests' pitch loops are bounded.
Asking from the chat composer to open Voice Settings or Voice Preview
closed chat around the focused input, leaving focus on a hidden control.
Focus held in chat now moves to the requested view's tab, as the panel's
own tabs move it; focus anywhere else stays put.
Three 40 ms actions in one round outlast a 50 ms deadline unless each
action re-arms it, so removing that re-arm now fails the test for both
providers.
The conversation is kept to its newest 60 messages, so once full it no
longer grows as a message is sent, and a reader who had scrolled up was
left behind by their own request. The view now spots a send by the newest
user message's id instead of the list's length.
The attach menu promised up to 10 KB per file, but the attachments share
one 10 KB budget, so two 6 KB files were refused. The hint now says the
limit covers them all, in every locale.
With Voice Preview off the voice panel never opens on its own, and chat
Settings hid the voice preferences, so the Preview toggle, inactivity
timeout and model tier could not be reached by pointer. Chat Settings now
show them below the chat options, still in chat's frame and without the
voice tabs.
set_panel_open for voice-settings or voice-preview reported success while
chat's open state kept the voice panel hidden, minimized chat included. A
successful explicit show now closes chat, which keeps the typed session,
its running turn and its messages; reopening chat restores them.
The streamed oversized body was invalid JSON, so the loader returned
nothing whether or not the byte cap applied. Pad a valid catalog with a
usable camera instead, so only the cap can refuse it.
TranStar's Content Usage terms prohibit copying, distribution and
external framing of its images without TxDOT's prior written
permission. The opt-in text only said the pack was off unless
CCTV_HOUSTON_ENABLED=1, without saying what an operator needs before
setting it. Say "enable only if you hold TxDOT's written permission" in
.env.example, the README, DATA_SOURCES.md, CURRENT-STATE and the
changelog, matching the NYC and Florida packs, and fix the column of the
.env.example comment.
The houston-cctv credit now reads "(Houston, when enabled)" and links
the Content Usage terms, like the Florida credit. Where the docs said
frames are "never stored or redistributed", they now say what happens:
frames are relayed on demand, buffered only per request, sent with
no-store and not archived.
German Khokhlov