Commit Graph
1147 Commits
Author SHA1 Message Date
Sameh Khamis 620a337ce8 Weather rows play at the timeline's speed; the frame time shows under reduced motion; tidy the timeline's mark label
A weather row's play ran the world clock at whatever rate it had, and
going live set that back to 1, so the speed chosen on the timeline was
lost. The world clock now keeps its rate while paused and live, and the
timeline's speed sets it whenever it is chosen, so any play runs at it.
A row's play starts from the start of the covered time when live or at
its end, as the timeline's does, and does nothing while every product the
row shows is suspended, as its reduced-motion note says.

Live, the Weather panel's frame time is the newest of each product's
frames, suspended or not, so it no longer goes away under reduced motion,
on a hidden page or without an imagery host.

A weather layer made without a weather clock builds its own when first
enabled rather than when made, so a layer never turned on leaves the
world clock alone, and its own clock (createWeatherClock({ shared: false }))
leaves the world's time where it is when destroyed; only the last shared
weather clock sends the world live.

On the timeline, a zoom or a pan clears the hovered tick's label, a label
is never wider than the track and ends in an ellipsis, and a mark's label
is cut to 60 characters (WORLD_CLOCK_MARK_LABEL_LENGTH).

The changelog entry says what a row's step does, names the earthquake
layer's new exports and says it registers with the world clock.
2026-11-14 20:52:45 -08:00
Sameh Khamis 558e4a919a Timeline marks carry labels; a tap by a tick goes to its mark
A layer's world clock coverage may now give each mark as an object,
{ time, label?, id?, kind? }, as well as a bare epoch ms number, and the
two may be mixed. worldClock.coverage() keeps marks as the sorted list of
distinct times, so existing readers are unchanged, and adds markDetails:
the merged marks in time order (then kind, label and id), each frozen and
holding only the fields given. Marks given alike by several sources appear
once, a bare time is dropped where a labelled mark shares it, and a mark
with no finite time is ignored. The contract is documented in the
worldClock JSDoc and docs/APPLICATION.md.

Launches label their marks with the mission's name (the launch's where it
has none), cut to 27 characters in capitals as the mission index shows
names. Earthquakes of magnitude 6 and up label theirs with the magnitude
as the map shows it and the feed's place cut to 40 characters, such as
"M6.4 · 113 km SSE of Lata, Solomon Islands"; the layer now tells the clock
when the labels change as well as the times.

On the timeline, a pointer within 6 px of a tick shows its label over the
track (nothing for an unlabelled mark), and a tap there goes exactly to
the mark's time instead of the point tapped. A tap elsewhere and a drag
work as before, and ticks stay ticks. The arrow keys still step from mark
to mark; with the handle on a mark, its labels follow the time in the
handle's aria-valuetext, and show over the track while it has focus.
2026-11-14 20:30:01 -08:00
Sameh Khamis 7cb854c923 The timeline marks launches and strong earthquakes, not every weather frame
The timeline drew a tick for every registered mark, and the weather clock
registered every radar, satellite and lightning frame, which come every few
minutes, so the track was a wall of dashes and the arrow keys crept from
frame to frame.

Weather products now register only the span of their frames (start and
end, as before) with no marks. Holds, the gate and the next-frame wait
while the world plays are unchanged. A weather row's step param goes to
the previous or next weather frame (every shown product's frames, and the
row's own while it is suspended) rather than to the timeline's marks.

The Earthquakes layer registers with the world clock once, at init, and
unregisters on destroy. While on, its quakes of magnitude 6 and up
(EARTHQUAKE_MARK_MAGNITUDE) are marks, and its coverage is their own span,
or none without any, so it never stretches the timeline beyond the feed.
Off, it has none. It tells the clock when the set of marks changes. The
map still draws every M2.5+ quake.

Launches stay marks. With no mark ahead or behind, the arrow keys step
along the track as shown.
2026-11-14 20:28:56 -08:00
Sameh Khamis 326cab4cf2 A weather layer without a shared clock keeps its own on the world clock
Built without a weather clock, the weather layer still ran a frame replay
of its own: params.play stepped its frames every two seconds and went round
from the last to the first, params.step and params.latest picked frames
locally, and the layer tracked whether it followed the newest frame. That
was a second way to move time.

The layer now builds a weather clock on the page's world clock when none
is passed, and destroys it with the layer, so every layer follows the world
clock and its params move the world clock as the timeline does. The local
replay, its timer, the follow-latest flag, the wrap to the first frame, the
timerActive diagnostic and the reduced-motion "manual history available"
message are removed.
2026-11-14 20:26:26 -08:00
Sameh Khamis 3cfd414e70 The main timeline is the only time control; the Weather panel shows its frame time
The Weather panel kept a second time transport of its own: a slider, step
buttons, Latest and Play, backed by a replay in the weather clock that
stepped the observed frames every two seconds and went round from the last
to the first. The weather clock also attached itself to the world clock as
a driver, so the timeline's Play became that replay whenever weather was on.

The panel now shows the frame time only: the newest frame and its age while
live, the timeline time alone at a past time. The weather clock no longer
has setTarget, step, latest, play, pause or togglePlay, its state no longer
has playing, and it no longer drives the world clock. It still follows the
world time, registers each product's frames as marks the timeline's arrow
keys step to, holds its products, and gates the world's continuous play at
each next frame until it loads. weatherClock.world names the world clock it
follows.

A weather row's play, latest and step params move the world clock as the
timeline does: play toggles continuous play (from the start of the covered
time when live), latest goes live, and step goes to the previous or next
mark. The rail timeline component, which only the panel used, is removed,
along with its unused messages in every locale.
2026-11-14 20:25:31 -08:00
Sameh Khamis 4f23ad330c Timeline marks carry labels; a tap by a tick goes to its mark
A layer's world clock coverage may now give each mark as an object,
{ time, label?, id?, kind? }, as well as a bare epoch ms number, and the
two may be mixed. worldClock.coverage() keeps marks as the sorted list of
distinct times, so existing readers are unchanged, and adds markDetails:
the merged marks in time order (then kind, label and id), each frozen and
holding only the fields given. Marks given alike by several sources appear
once, a bare time is dropped where a labelled mark shares it, and a mark
with no finite time is ignored. The contract is documented in the
worldClock JSDoc and docs/APPLICATION.md.

Launches label their marks with the mission's name (the launch's where it
has none), cut to 27 characters in capitals as the mission index shows
names. Earthquakes of magnitude 6 and up label theirs with the magnitude
as the map shows it and the feed's place cut to 40 characters, such as
"M6.4 · 113 km SSE of Lata, Solomon Islands"; the layer now tells the clock
when the labels change as well as the times.

On the timeline, a pointer within 6 px of a tick shows its label over the
track (nothing for an unlabelled mark), and a tap there goes exactly to
the mark's time instead of the point tapped. A tap elsewhere and a drag
work as before, and ticks stay ticks. The arrow keys still step from mark
to mark; with the handle on a mark, its labels follow the time in the
handle's aria-valuetext, and show over the track while it has focus.
2026-11-14 20:17:46 -08:00
Sameh Khamis 900c76425c The timeline marks launches and strong earthquakes, not every weather frame
The timeline drew a tick for every registered mark, and the weather clock
registered every radar, satellite and lightning frame, which come every few
minutes, so the track was a wall of dashes and the arrow keys crept from
frame to frame.

Weather products now register only the span of their frames (start and
end, as before) with no marks. Holds, the gate and the next-frame wait
while the world plays are unchanged. A weather row's step param goes to
the previous or next weather frame (every shown product's frames, and the
row's own while it is suspended) rather than to the timeline's marks.

The Earthquakes layer registers with the world clock once, at init, and
unregisters on destroy. While on, its quakes of magnitude 6 and up
(EARTHQUAKE_MARK_MAGNITUDE) are marks, and its coverage is their own span,
or none without any, so it never stretches the timeline beyond the feed.
Off, it has none. It tells the clock when the set of marks changes. The
map still draws every M2.5+ quake.

Launches stay marks. With no mark ahead or behind, the arrow keys step
along the track as shown.
2026-11-14 20:04:37 -08:00
Sameh Khamis 7f1c35c5ed A weather source can name its provider for each product
The Rain radar, Lightning density and Satellite clouds rows named NOAA
nowCOAST until a manifest named its own source, whatever the source read.
A weather source may now supply sourceName(kind), kind being radar,
lightning or satellite; the row shows that name until a manifest names one.
The name is read once when the layer is built and held to the same rule as
a manifest's display.source. A source without names, or one whose name is
refused or fails, still shows NOAA nowCOAST.
2026-11-14 19:20:02 -08:00
Sameh Khamis 97bd61711c A weather layer without a shared clock keeps its own on the world clock
Built without a weather clock, the weather layer still ran a frame replay
of its own: params.play stepped its frames every two seconds and went round
from the last to the first, params.step and params.latest picked frames
locally, and the layer tracked whether it followed the newest frame. That
was a second way to move time.

The layer now builds a weather clock on the page's world clock when none
is passed, and destroys it with the layer, so every layer follows the world
clock and its params move the world clock as the timeline does. The local
replay, its timer, the follow-latest flag, the wrap to the first frame, the
timerActive diagnostic and the reduced-motion message are removed.
2026-11-14 18:40:14 -08:00
Sameh Khamis 5150279ccf The main timeline is the only time control; the Weather panel shows its frame time
The Weather panel kept a second time transport of its own: a slider, step
buttons, Latest and Play, backed by a replay in the weather clock that
stepped the observed frames every two seconds and went round from the last
to the first. The weather clock also attached itself to the world clock as
a driver, so the timeline's Play became that replay whenever weather was on.

The panel now shows the frame time only: the newest frame and its age while
live, the timeline time alone at a past time. The weather clock no longer
has setTarget, step, latest, play, pause or togglePlay, its state no longer
has playing, and it no longer drives the world clock. It still follows the
world time, registers each product's frames as marks the timeline's arrow
keys step to, holds its products, and gates the world's continuous play at
each next frame until it loads. weatherClock.world names the world clock it
follows.

A weather row's play, latest and step params move the world clock as the
timeline does: play toggles continuous play (from the start of the covered
time when live), latest goes live, and step goes to the previous or next
mark. The rail timeline component, which only the panel used, is removed,
along with its unused messages in every locale.
2026-11-14 18:28:53 -08:00
Sameh Khamis 489c316556 Merge main (d49d3d10) into the renderer branch 2026-11-14 17:21:53 -08:00
Sameh Khamis 6e23a73283 fix(weather): weather cards measure from the timeline time and know when wind follows it
At a past time the radar, lightning and satellite cards aged the shown
frame and judged the source delayed against the wall clock, so a frame
from years back read "Source observations delayed" and an age in the
millions of minutes. Frame ages, the delayed status and the stale stat
now count from the timeline time at a past time, and from now while
live, as before. The observed timeline's readout and preview show the
time alone at a past time, since its age from the timeline time is
always zero.

The wind card noted that it does not follow the timeline whenever the
observed clock was at a past time, even when a host follows the world
clock for wind. The weather clock now reports whether a layer follows the world
clock (weatherClock.follows(id), the world clock's follows), and the
wind row and card drop that note when its source follows the timeline.
2026-11-14 17:04:55 -08:00
Sameh Khamis 7b4b4d4184 fix(cyclones): cards leave the map with their storms; null advisory values are left out
The world overlay drew on desynchronized 2D contexts. After a frame that
only clears, Chrome could present an earlier buffer, so storm cards and
forecast lead-hour labels stayed on screen when a snapshot without storms
(or an unavailable one) replaced them, although the overlay held no entries
and cleared every frame. Both overlay surfaces now use ordinary contexts.

The storm readout no longer prints "Unavailable" for a null value: an
advisory without pressure shows only its maximum sustained wind, one
without wind only its pressure, and one without either has no intensity
line. The advisory link stays hidden when an advisory has no link.
2026-11-14 16:56:09 -08:00
Sameh Khamis 6f830a2e70 Let a host application place live contacts
createApplicationCatalog takes an optional placement provider. Its
layer(kind) hands Flights, Military Flights, AIS Vessels, Transit and Rail
a place(id, wallMs), and optionally observe(id, fix) and forget(id). While
live, each layer tells it every fix it accepts and draws a contact where it
places it: position, height (the layer's own when none is given), course
and speed. A null answer, a provider that throws, a kind it leaves out, or
no provider at all keeps the layer's own motion unchanged, and following
the world clock the layers never ask it. A transit vehicle or train it
holds still lets the render loop idle and is asked again each second;
vessels ask for frames only while it places one, and stop when the layer
turns off.

Tests show the layers draw and reconcile exactly as before without a
provider and with one that places nothing, draw where a provider places
them, and idle while it holds them still.
2026-11-14 15:07:25 -08:00
Sameh Khamis 5d733eb07b Fix scrubs to live on long tracks, fire ages in a past window, and gaps between hourly cloud frames
- World timeline: a scrub counts as at now within a share of the track
  (0.5%), now held to at most two minutes. A layer whose source covers
  years made the window weeks wide, so most of the last month snapped to
  live. Short tracks keep their window.
- Fires: card and detail ages count back from the end of the 24 hours the
  layer shows when its snapshot ends at a set time, and from now only when
  it runs to now. A window that ended months ago read "new 105d" on fires
  three hours old at the time shown.
- Weather: a product's max gap and the delay after which its latest frame
  reads late are at least one and a half of its feed's median frame
  spacing (over its latest frames). A regional cloud feed with frames an
  hour apart drew nothing for the second half of every hour while
  scrubbing and read late after twenty minutes; feeds with frames minutes
  apart keep their gaps.
2026-11-14 14:52:48 -08:00
Sameh Khamis 9b8f45e62b fix(cctv): turning the layer on no longer flashes every camera before the view pass
The icon set was created shown, and the pass that hides cameras beyond the
horizon and thins crowded areas runs only from enable(), after init has
waited on the health check. Every frame drawn in that wait showed the whole
catalogue. The set now starts hidden; enable() culls, then shows it.
2026-11-14 13:21:59 -08:00
Sameh Khamis b277b55547 fix(selection): a click that follows a contact from straight down keeps the camera's heading
A click keeps the camera's view of the contact it follows (keptViewFrom),
but a follow frames the eye from its offset alone, its heading the way the
offset leans. Seen from straight down, the eye's view at a contact off the
centre leans only as far as the Earth curves between them, towards the eye,
so the follow turned the camera to face the contact's bearing (from north
to 298 degrees on a click 40 km out from 60 km up). followViewFrom keeps the
range and the tilt to the contact's horizon and turns them to the pose's
heading, a view straight down kept a hair off vertical so its heading holds.
Flights, Military Flights and trains follow from it; a world-focus fly-to,
which sets its orientation itself, keeps the view as it was.
2026-11-14 13:14:15 -08:00
Sameh Khamis 39c89d563b Draw transit vehicles as trolleybuses, cable cars, funiculars, gondolas and monorails
The transit layer knew five modes, so a trolleybus drew as a bus, a
funicular as a train and a coach as a city bus. The GTFS basic route types
are now modes of their own (trolleybus, cable_tram, monorail, funicular,
aerial_lift), each with an icon, colour, detection tier, card word, voice
name, speed ceiling and fleet model.

A vehicle record may carry its route's GTFS route_type as routeType. It
settles the mode after the feed's fleet hint and before its route hint, and
picks the finer model (a coach for 200, a high-speed set for 101) when the
type is a kind of the vehicle's mode. Retained history classifies epochs
through transitModeFor too, so trails join the live vehicle.

Route hints from each operator's routes.txt: Prague's trolleybus lines
(51-59, 232, 275) and Petrin funicular, and the trams, trolleybuses and
metro lines of Bucharest, Cluj-Napoca and Turin. A feed may also name
route corrections that outrank the route type: Le Havre's routes.txt types
its funicular (8-FUNI) as a bus, so it is corrected to a funicular.
2026-11-14 12:03:12 -08:00
Sameh Khamis 52507a0755 Draw no buoy for a virtual aid to navigation
A virtual aid (AIS message 21's VirtualAtoN flag) is a mark broadcast
where nothing physical stands, so drawing it as a buoy showed a mark
that is not there. The vessel source record now carries `virtual`
(false unless a source says true; any source may set it), AISStream
sets it from VirtualAtoN, and the vessel layer keeps such an aid's
disc: vesselModelSpec returns null for it and the layer gathers no
model item for it. Its card, selected card and readout add VIRTUAL
after its kind.
2026-11-14 11:07:13 -08:00
Sameh Khamis 6c7fe48f40 Show an aid to navigation's kind, not a speed or heading
A buoy's card, selected card and HUD readout showed "0.0KT · 135°" from
whatever its source reported. A fixed mark has neither, so they now show
its kind alone, whole ("CARDINAL MARK N", which the 14-character type cut
read as "CARDINAL MARK "), in the bone white of its disc.

isAidToNavigation now knows every kind an aid report names ("Light, with
sectors", "Fixed structure off shore" had no aid word), leaves out a
"Buoy Layer" as it does a tender, and matches each type text once: the
vessel layer asks per vessel on its rotation pass, which now skips the
aid discs it never turns.

Aid rows no longer cost ships their place: aisStreamRows lists every
vessel ahead of every aid, so the layer's 12,000-row request never drops
a ship for a buoy, and vessels_in_area (and the brief built on it)
counts ships only. An aid's name runs on into its NameExtension.
2026-11-14 10:02:59 -08:00
Sameh Khamis 866a9816f2 Merge origin/main into the renderer seam
Brings in main up to f24abfc88: cockpit subject providers, the render
failure notice, aircraft drawn in their own mesh colours, airport ground
vehicles, and an aircraft with no ground track facing its true heading.

Under the seam:
- The render failure notice lives in the Cesium adapter
  (src/render/cesium/renderFailure.js) and is the application hook
  renderFailureNotice({allowReload, store}); its private Cesium fields
  (Event's raise queue, the widget's render loop flag) are read through
  internals.js. The inline panel's timer waits while the frame port reports
  the loop stopped, and goes on after a Retry.
- Ordinary aircraft models draw white with the 'highlight' colour blend
  through the draw port; tracked and emergency colours tint the mesh.
- Held trains and transit vehicles hide their route set and markers through
  the draw port; the fleet model test fakes answer loads through the fake
  draw port instead of Cesium's glTF loader.
- The Cockpit's subject view follows and places the camera through the
  camera port.
2026-11-14 09:59:55 -08:00
Sameh Khamis 279aedb2f4 Draw aids to navigation as buoys
A buoy, beacon, RACON, light or IALA mark in the vessel feed was drawn
as a ship. A vessel record whose type names one, or whose MMSI is an
aid-to-navigation station's (99MIDxxxx), is now isAidToNavigation and
vesselModelSpec draws it as the fleet set's buoy of its mark (cardinal
N/E/S/W, port or starboard hand, safe water, isolated danger, special
mark; a red can when the type names no mark), at its built size and
flagged fixed so its model does not turn to a heading. Its icon is a
disc instead of a chevron.

AISStream now subscribes to AidsToNavigationReport by default, and the
server names each report's aid type code (0 to 31) as its kind instead
of reading it as a ship type.
2026-11-14 09:54:01 -08:00
Sameh Khamis b86014244d fix(input): no double-click follow or zoom on the map
The globe viewer's own double-click tracked a picked entity with a
position or zoomed to one without. Layers moving onto the draw port had it
re-created one by one (data/stockFollow.js); following is a click in GEV,
so the viewer's handler is removed where the viewer is made and every
re-creation goes: earthquakes, cyclones, air quality, news, perimeters,
drone airspace, ghost maps, places, radio, cables, CCTV, ALPR, launches,
bikeshare, Local ADS-B, installations, directions, trails, data packs,
annotations, the library's view and local GeoJSON. The Cockpit's own
double-click and the draw tool's finishing double-click stay.
2026-11-14 09:10:14 -08:00
Sameh Khamis e72de07dab fix(rail): the selected route splits at the train and keeps its dark rim, as before
Before, the route was one clamped polyline whose material coloured it
ahead of the train and dimmer behind it, split exactly where the train is,
with a dark rim at its edges. Through the draw port it became per-segment
colours chosen by each segment's midpoint (the split jumped from vertex to
vertex) and lost its rim.

The contract gains a draped line style `split`: `color` from `at` (a
fraction of its length) on, `behind` before it (`reverse`: the other way),
and an optional `rim` (the outer `widthFraction` of its width at `shade` of
each colour). `at`, `reverse` and the colours change in place. The Cesium
renderer draws it with one material; the rail route uses it, measuring its
split in metres on the ground (one per vertex where the scene draws over
the surface). New conformance check draw.lines.split.
2026-11-14 08:33:31 -08:00
Sameh Khamis a3611caddb Fix the Local ADS-B model test name 2026-11-14 08:25:05 -08:00
Sameh Khamis 4d81d3be3a Describe aircraft models in their mesh colours in the docs 2026-11-14 08:24:51 -08:00
Sameh Khamis 8cb096fc21 Draw aircraft models in their own mesh colours
Every aircraft model (Flights, Military Flights, Local ADS-B) mixed 94% of a
flat class colour over its mesh, so airliners drew as white silhouettes and
military ones as amber. Models now use HIGHLIGHT: white leaves the mesh's own
colours as built, and the tracked and emergency colours tint the mesh without
hiding its paint. The IR boost still draws them flat white.
2026-11-14 08:06:51 -08:00
Sameh Khamis 4f24b9a062 fix(wildlife): a tap selects only a sighting exactly under it again
A click read the scene's exact pick at the tap. Through the input
dispatcher it read the click's id, which on a touch screen comes from the
wider contact search: a tap near a sighting selected it, and one near
another layer's contact kept the selection. It reads the exact top hit
again, as the shipwrecks and Local ADS-B layers do.
2026-11-14 01:51:24 -08:00
Sameh Khamis cbc0c114eb fix(local-adsb): a tap selects only an aircraft exactly under it again
A click read the scene's exact pick and a drill at the tap. Through the
input dispatcher it read the click's id, which on a touch screen comes
from the wider contact search: a tap near a local aircraft selected it,
and one near another layer's contact kept the selection. It reads the
exact top hit again, as the shipwrecks layer does.
2026-11-14 01:49:17 -08:00
Sameh Khamis d2e161372c fix(vessels): the ship the Cockpit rides is no object in view again
In-view scanning skipped a vessel whose chevron was hidden and not drawn
as its model, which covered the ship the bridge camera rides. It now
skipped only vessels past the horizon, so the ridden ship was reported,
at the camera's own position. It is skipped again unless its model draws
it.
2026-11-14 01:46:41 -08:00
Sameh Khamis f4beb676ae fix(rail): the selected train's line draws over every network loaded before it again
Each route was a primitive added when it was drawn, so it sat over the
networks of feeds loaded until then. Its draw set was made once and kept
the slot of the first route, so a feed's network loaded after that drew
over later routes. Each route is drawn in a set made for it.
2026-11-14 01:40:41 -08:00
Sameh Khamis 0287ddb9be fix(local-adsb): the selected aircraft's trail head ends on its icon every frame again
The head was a polyline entity whose positions were read each frame. Its
draw-port line was redrawn at most every 100 ms while the aircraft flew,
so its end lagged the icon. It is drawn each frame the aircraft moves, as
the Flights trail head is; the trail still skips a head that has not
moved.
2026-11-14 01:38:50 -08:00
Sameh Khamis 6af4b08293 fix(local-adsb): a click or double-click on a UAT ring takes its aircraft again
The 978 MHz ring was a point on the aircraft's own entity, so a pick on
it was a pick on the aircraft. As a separate points set it was drawn
unpickable and a click there fell through to what is under it. The rings
are picked again and read as their aircraft.
2026-11-14 01:37:59 -08:00
Sameh Khamis 4b665147e1 fix(traffic): road lines stack as before: flow lines jam on top, heat-lines slow over jam
The lines were one ground primitive per bucket, added free, slow, jam for
flow lines and jam, slow for heat-lines, so where roads cross the later
bucket drew on top. Through the draw port they were one set in kept order
(jam first), and its glow lines draw after its solid ones, which turned
both stackings over. Flow lines are now set free, slow, jam; slow
heat-lines go in a set made after the jam lines' set.
2026-11-14 01:35:56 -08:00
Sameh Khamis 898909c245 fix(cctv): a double-click zooms to a coverage line and follows the monitor plane again
The coverage rays and cap were polyline entities, which the default
renderer's double-click zoomed to, and the monitor plane a plane entity
with a position, which it followed until the plane was removed. As
draw-port items they took no part in it. The camera icons were billboards
before, so they still take none.
2026-11-14 01:32:03 -08:00
Sameh Khamis 0dc3a1fb66 fix(bikeshare): a double-click follows the selected station again
The selected station's highlight was a point entity, which the default
renderer's double-click followed; deselecting removed it and ended the
follow. As a draw-port point it took no part in it. The station dots were
point primitives before, so they still take none.
2026-11-14 01:30:38 -08:00
Sameh Khamis 94ea9cd01d fix(submarine-cables): a double-click follows a landing point or reference and zooms to a cable again
The cables, landing points and references were entities, which the default
renderer's double-click followed (a point, or a reference at its tip) or
zoomed to (a cable or area) until the sources were replaced or hidden. As
draw-port items they took no part in it.
2026-11-14 01:24:24 -08:00
Sameh Khamis d003d9ee78 fix(news): a double-click follows a marker or zooms to an outline again
The markers and outlines were entities, which the default renderer's
double-click followed (a marker, until the markers were drawn anew) or
zoomed to (an outline or hotspot box). As draw-port items they took no part
in it.
2026-11-14 01:22:44 -08:00
Sameh Khamis 6ac8aed1b5 fix(radio): a double-click follows a station again
Each station, and the selected one's dot, was an entity, which the default
renderer's double-click followed until the stations or the selection were
drawn anew. As draw-port items they took no part in it.
2026-11-14 01:20:12 -08:00
Sameh Khamis c57a8bea83 fix(alpr): a double-click follows a camera with its card again
Each camera was an entity, which the default renderer's double-click
followed, showing its card; a camera no longer shown, or a hidden layer,
took the follow with it. As a draw-port icon it took no part in it.
2026-11-14 01:18:51 -08:00
Sameh Khamis 37a1e1500b fix(air-quality): a double-click follows a station again
The stations were entities, which the default renderer's double-click
followed, framed to fit the disc; one no longer reported took the follow
with it. As draw-port items they took no part in it.
2026-11-14 01:17:37 -08:00
Sameh Khamis fbc40ef3b6 fix(earthquakes, cyclones): an item that goes takes its double-click follow with it
Removing a followed entity ended the default renderer's follow. A disc gone
from the feed, or a storm point gone from the advisory (or a cleared one),
now ends it too.
2026-11-14 01:17:08 -08:00
Sameh Khamis def2e1ecca fix(perimeters, drone-airspace): a double-click zooms to an area again
The areas were polygon entities, which the default renderer's double-click
zoomed to. As draw-port items they took no part in it.
2026-11-14 01:16:20 -08:00
Sameh Khamis 26e8e26ba8 fix(ghostmaps): a double-click follows a pin or zooms to a line or area again
Each edition was drawn as entities, which the default renderer's
double-click followed (a pin) or zoomed to (a line or polygon); an expired
report or a replaced edition took the follow with it. drawnItemTarget reads
that rule off a draw item, for every layer that drew entities before.
2026-11-14 01:15:29 -08:00
Sameh Khamis 766cf68272 fix(local-adsb): a double-click follows a local aircraft with its card again
Each aircraft was an entity, which the default renderer's double-click
followed, showing its tracked card; an aircraft that expired took the
follow with it. As a draw-port icon it took no part in it. A double-click
follow can now carry the holder whose entity record shows the card.
2026-11-14 01:12:14 -08:00
Sameh Khamis f2983e8c1a fix(osm-places): a double-click follows a place again
The places were entities, which the default renderer's double-click
followed; new results replaced them all, which ended the follow. As
draw-port items they took no part in it.
2026-11-14 01:10:46 -08:00
Sameh Khamis fabf4439fe fix(cyclones): a double-click follows a storm's point or zooms to its track or cone again
The advisory was drawn as entities, which the default renderer's
double-click followed (centre and forecast points) or zoomed to (tracks,
cones, outlines). As draw-port items they took no part in it.
2026-11-14 01:10:16 -08:00
Sameh Khamis 50cd49cc31 fix(earthquakes): a double-click follows a disc again
The discs were entities, which the default renderer's double-click followed,
framed to fit the disc. As draw-port items they took no part in it.
2026-11-14 01:09:31 -08:00
Sameh Khamis e3cfdcf44e Tracked aircraft keep moving when reports give no speed or a stale one
A fix that moves while the reported speed is 0 or stale used to leave the
aircraft frozen, then jump it kilometres at once. The step between fixes now
measures a jump, and the drawn speed bounds the recovery.
2026-11-14 01:06:21 -08:00
Sameh Khamis 63a6595eaf fix(directions): a double-click follows an A or B marker and zooms to the route again
The markers and the route were entities, which the default renderer's
double-click followed (a marker) or zoomed to (the route). As draw-port
items they took no part in it. Directions now joins the stock double-click
as launches and imported pins do.
2026-11-14 00:44:58 -08:00