Commit Graph
10 Commits
Author SHA1 Message Date
Denis Groshev c6e53e5315 Node posing keeps each node's last matrix in one array, copied in place 2026-11-17 16:29:08 +01:00
Denis Groshev ce3d292198 Review of the PR's own code: joints, rings, node posing, card clearance
- A hand-set Canadarm2 joint no longer stops Dextre's and the Japanese arm's
  sway: only the joints set by hand hold still.
- A ring already shown or hidden is not sent to the renderer again (the
  close-up asked for it every frame).
- Node posing: the matrix handed to a node goes through one scratch (the
  node copies it), and a name the model lacks is looked up once.
- The tracked card's clearance step holds until the clearance has left it,
  so jitter at a step's edge no longer republishes the card every frame.
- A frame the station cannot be placed in gives its dots back rather than
  drawing neither model nor dot.
2026-11-16 20:42:08 +01:00
Itallo BrandãoandClaude Opus 5.5 c737a354c4 Merge upstream main into feat/iss-3d-model
Main's renderer seam (#1760) keeps Cesium inside src/render/cesium/, so the
ISS model now draws through the renderer contract:

- issModel.js draws the station as an item of a draw-port `models` set
  (url, position, heading/pitch/roll from its flight axes, scale, minimum
  pixel size, display range), hands the near range over through the dots'
  `displayRange`, and reads the eye from the camera port.
- issArticulation.js computes each joint's matrix as plain numbers and the
  Sun from geo/celestial, and hands them over by node name.
- The contract's ModelItem gains `nodes`: transforms of a model's named
  glTF nodes, which the Cesium port writes once the model is ready and
  again only when they change; a dropped name gets its authored pose back.
- issCommand.js asks the frame port for frames and zooms by shortening the
  camera port's follow offset.
- A click on the model is told by its draw hit.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
2026-11-16 04:34:13 -03:00
Sameh Khamis 0ab31d4fb8 The renderer seam: clicks go to the newest tool, recession and display groups through the contract, drawing at parity with Cesium
- Clicks: when two tools want the globe's clicks, the newest takes them and the older is told and turns itself off; a click is decided when it arrives, and ambient selection fires only when no tool holds the pointer. The "map is busy" paths and their strings are removed.
- Recession: the limb fade is shared (src/render/recession.js) and reaches icon and model sets through SetSpec.recede; tuning applies on the next frame.
- Display panel groups are published through src/ui/displayGroups.js; the Weather group and src/viewWeather.js are removed.
- Draw port: a set whose icons only move is moved in place, and models that did not change are not restyled each frame, so moving fleets cost what they did when drawn directly; an untinted, fully opaque model is drawn without a colour.
- Conformance: input.lease.lost checks the new lease inside onLost and reports a throwing onLost; draw.sets.recede covers model sets.
- QA scripts read the renderer host instead of internals the seam replaced.
2026-11-15 17:03:09 -08:00
Sameh Khamis e3865f462f Merge origin/main into the renderer-contract branch: the procedural fleet models drawn through the renderer's model sets
Aircraft, military, local ADS-B, vessel, transit and rail models come from
the fleet model set, loaded up front and drawn life size through the draw
port's models sets; no layer touches the viewer or Cesium outside
src/render/cesium/. The models capability gains glTF bytes (gltf), a
per-axis stretch (axisScale), a colour for tinted parts (maskColor) and a
cut below the origin (clip: 'belowOrigin'), with conformance checks.

Main's rail layer and Data Library are ported to the ports; the CCTV
footprint probe keeps the globe-terrain clamp through the query port.
2026-11-13 14:14:42 -08:00
Sameh Khamis 46cdeba7fa Remove renderer contract members nothing in the application uses
Drops from the contract, the stub, the Cesium renderer and the
conformance suite: agent paths, renderer-propagated orbits and celestial
draws (orbits stay drawn as icons and inertial lines), scalar raster
fields, lodGroup, volume classification, icon eye offsets, the dash gap
colour, box shapes, courseBlendMs (courseGlide covers easing), relief
surface shading, globe clouds and water, sky atmosphere tuning, heightmap
and quantized-mesh terrain, WMTS and ArcGIS imagery, the batched cached
height read, the quality benchmark and the animated-style and overlay
pixel-ratio knobs. Capabilities clouds, water, celestial, agents, orbits
and benchmark go with them.

The lodGroup check becomes a displayRange check across two sets, the
height-query check uses an extruded polygon in place of a box, the shape
scenes draw extruded blocks where they drew boxes, and the fields scene
draws a raster shell. The shape references are recorded again.
2026-11-10 03:27:10 -08:00
Sameh Khamis 5370feb825 Report model load failures to model sets, and bound the tracked model's retries again
The renderer contract gains an optional event on model draw sets,
`on('loadFailed', (id, message) => ...)`, beside `ready`: a model's url
failed to load, once per failed load. The item stays in the set drawing
what it drew before; removing it and adding it again tries at once. A
renderer that cannot tell a failure may never fire it.

The Cesium draw port fires it once Cesium is done with the frame it
raised the error in, and not for a load that was superseded or whose item
went. The stub fails urls under `stub-fail:`, telling each load once. A
conformance check (`draw.models.loadFailed`) runs on both, with a model
url the dev server does not serve for Cesium.

The flights and military layers use it in place of rewriting every
unloaded model every 5 s. A fleet model whose load failed is removed and
added again 5 s later. The tracked model gets back its per-selection
budget: a failed load is let go and tried again 1.5 s later, and after
three failures the contact stays 2D until another is selected, as
before the models moved onto the draw port. A good load retires the
budget, and a model that loads after all is kept.
2026-11-07 19:44:15 -08:00
Sameh Khamis abe9f97768 Draw Flights and Military 3D models through draw-port model sets
The two aircraft layers' fleet and tracked models are now draw-port
models sets made each layer lifetime, re-posed and restyled in place,
instead of Cesium models in a collection of their own. Model records are
plain data; picks name the set and the contact, readiness comes from the
set's ready event, the IR boost restyles in place (unlit, white tint,
full blend), and the drawn scale comes from the camera pose and pixel
floor. Fleet writes go out together at the end of each tick, before the
icons they replace, and a failed write hands the contacts back to their
icons. A model that has not loaded is rewritten every few seconds so the
renderer can retry it, which replaces the tracked model's load-failure
budget. Models load off the tile-contended job queue, as before.

aircraftModelLayer.js, modelRecord.js and the flights and military
lifecycle and testing files, plus flights rendering.js, come off the
Cesium allow-list.
2026-11-07 17:10:38 -08:00
Sameh Khamis 20fdfd492e Draw Local ADS-B aircraft models through the draw port
Local ADS-B's 3D aircraft are now one models set of the renderer's draw
port, re-posed in place each frame, instead of Cesium models of their own.
Ground placement samples heights through the query port and sees through
the layer's sets by id; clicks read the dispatcher's draw-set hit and the
query port's drill. A class change keeps the drawn model, at its own belly
offset, until the new asset is ready; a scale-only change applies at once.
The models file leaves the Cesium allow-list.

Cesium model sets retry a failed load when its item is next updated after
a short wait, and parse an item's tint only when it changes.
2026-11-07 15:43:33 -08:00
Sameh Khamis 20155ff3fa Change Cesium model sets in place, and check models on both renderers
A models set kept one primitive per build and loaded every model again on
any change. Each item now keeps its own Cesium model: an update re-poses it
(position and orientation), and changes its scale, pixel floor, maximum
scale, shading, tint, colour blend, environment map, display range and show
where it is. Only a new url loads again, and the model it draws stays until
the new one is ready. `ready` fires once per load. Each frame before the
scene draws, the set caps models at their maxPixelSize, scales and fades
them by distance, and hides them past the horizon in a horizonCull set. A
load that fails is let go after its update, and stays a failure for
whenSettled until its item changes.

The stub fires `ready` only for a new item or a new url, and draws models
into readPixels as tinted squares. Its harness has a model asset now, so the
model checks run on it. New checks: a model moves, turns and restyles
without loading again, and only a new url loads it; its tint and colour
blend change live.
2026-11-07 15:43:33 -08:00