The card's hero tile now previews what was picked. A flight shows its
photo when Contacts has one, its route on a small globe from origin to
destination with the plane on it, its 3D model turning with callouts of
what can be worked out about the flight (phase, flight level, Mach, squawk,
signal age), and the view ahead from its cockpit with speed and altitude
tapes. The model and the cockpit view take turns, the route hands over to
the cockpit view after twenty seconds, and a switch picks one and holds it.
Under reduced motion nothing swaps by itself.
A satellite shows the ground beneath it and graphs its altitude and speed.
Each preview draws in a small scene of its own and frees its graphics
context as it closes, so flicking through cards never pushes out the
globe's.
Co-authored-by: Sameh Khamis <[email protected]>
- Following comes only from the camera's own follow, never claimed ahead
of it; vessels, which the camera does not follow, are flown to.
- A drag or a long press never selects, and only a clean click on open map
closes the card; a card painted on the overlay is not open map.
- Closing the card lets go through its own layer only, as the person's
action, leaving other layers' selections alone.
- Radio's panel, with its local SDR tuner, shows whether or not the Radio
layer is on; Contacts' Cockpit entry hides only while the card offers its
own.
- Expanded Context keeps the credits beside it right to left and with the
minimal HUD.
- Context counts as closed until its panel says it is open; closed, the
card's refresh and the view reading pause, and opening reads the view.
- The five-minute re-read fetches again past the caches, keeps what is
shown meanwhile, and an empty brief is not kept.
Co-authored-by: Manjunath Paparaju <[email protected]>
- Closed, the panel mounts neither the card nor the view summary, so it
reads no layer records and fetches nothing.
- The weather and news brief goes through the app's regional service
(endpoint overrides, lifetime signal), and a failed read is not kept.
- A spot that stays put reads its brief and hazards again every five
minutes; turning FIRMS on or off updates the hazards at once.
- Enter Cockpit is offered only for layers the tracking action can follow
(not local ADS-B), and a failed attempt leaves the card as it is; a
satellite ride gives up when the card changes or Context goes away.
- Closing the card lets go of the camera when it follows the card's item.
- Map picks leave Context alone while Cockpit runs.
- Expanded Context sits on the left edge in right-to-left languages, lets
go on the phone layout or in Cockpit, and a remount starts collapsed
without leftover tab classes.
- The Inspector and Properties tabs have tab ids, panels and arrow keys.
- Town lookups run again after zooming back in, the camera preview shows
facts only for its own camera, route places wait for the same route, and
acres and heights use the app's number format.
- The omnibar gets no runner from a voice session already disposed.
Co-authored-by: Manjunath Paparaju <[email protected]>
The Context panel's main tab shows the mode row again, with Contacts
(nearby sites search, the TR-3B toggle and the Awareness list) and Space
Missions (the roster and launch replay); only the Properties tab hides
them. Radio shows while its layer is on, and turning Radio or Launches on
opens Context. When Contacts follows the aircraft the card shows, its list
sits inside the card in a compact form and the card leaves out the flights
and vessels Contacts already lists. The card's Enter Cockpit replaces the
Contacts button, and leaving the cockpit returns focus to it.
Co-authored-by: Sameh Khamis <[email protected]>
Expanded, Context covers the right edge from top to bottom, so the credit
row now ends short of it. The credit model knows the expanded column and
pins the gap, the header test lists the new search and expand buttons, and
the controls tolerate operations without an annotation resolver.
Co-authored-by: Manjunath Paparaju <[email protected]>
A transit vehicle picked on the map now finds its record in Context (the
click carries the feed and vehicle key), so the card shows its operator,
place, route, report age and the operator's last reported state in plain
words. The layer card breaks transit in view down by motion (moving,
stopped, waiting for an update, no recent fix), mode, operator, last
reported state and crowding where the feed has it; vehicle-position feeds
carry no timetable, so early or late is not shown. Rows in the in-view
list carry a motion icon.
Clicking anything a layer can identify opens one card in Context: a hero
tile (route globe and 3D model for a flight, the camera for CCTV, headline
figures otherwise), its facts, actions with Cockpit or the orbital view as
the primary one, and a standard set of nearby blocks (weather and local
time, flights, vessels, hazards, alerts) within one radius the user sets.
Aircraft show altitude as a graph. Things that move are followed when
picked, and a card closes when its layer is turned off.
With nothing selected the panel describes the view: the layers that are on
with a breakdown of what each holds, the camera's height, what is in view,
then time, weather and local news. From far out it shows worldwide counts
per layer. A search field in the header narrows whatever the panel shows.
Prototype. Context reads weather and hazard feeds while its panel is closed,
the two 3D previews on a flight card repaint continuously, Follow can show
pressed after tracking has ended elsewhere, and most new strings are fixed
English. Same-named sites are told apart by position, not by a stable id.
Three fixes to how the globe draws and reports loading.
**The idle frame rate is the app's rule.** The Cesium frame port capped the loop at `IDLE_FRAME_RATE` whenever nothing held it, so the rule lived inside the renderer. The render governor now sets the rate: the display's own while the loop is held, `IDLE_FRAME_RATE` while not. The frame port gains `onHeldChange(cb)`, which says when its first hold is taken and its last released (animated visual styles included), so the governor hears every hold. The quality setting's frame-rate cap is kept apart from the governor's rate, and the loop draws at the lower of the two, so neither overwrites the other.
**Line batching is timed.** A line set waited 30 drawn frames before its unchanged lines settled into a static batch (300 for the long wait), so the batch built twice as fast at 120 Hz as at 60 Hz, and took seconds at the idle rate. It now waits `SETTLE_MS` (500 ms) and `LONG_SETTLE_MS` (5 s), and moved shapes go back into their batches on the same timing.
**KEY REQUIRED.** A layer that cannot load without a provider key ended the global status chip LOAD FAILED. The chip now has a KEY REQUIRED outcome, ranked below a real failure: a layer whose stats say `keyRequired` ends KEY REQUIRED, any other failure still ends LOAD FAILED. Vessels report a missing AISStream key as `keyRequired` and name the key in the panel; a later outage clears it, as it is no longer the key that is missing.
Checked: the full suite (new tests for `onHeldChange`, the quality cap against the governor's rate, timed settling, and the chip with and without a key), format, boundaries, build, the stub renderer boot and the Cesium conformance run; in the browser, the idle and held frame rates; and the first-run check now asserts that with no keys set the chip never says LOAD FAILED.
GEV stories never explore, carry no world time and are never live:
drop the resume play state, Jump to live, the exploring branches and
world-time arguments, the overridden play button rules, and the hidden
rail and fill. The legend reads a plain field instead of a mock one.
Restores the scene picker and its selection on load, after a delete and
after an import, so PLAY and NEXT work after a reload. Open in GEV
selecting a shot and NEW SCENE stay as they are.
- On GEV's phone layout, where neither the style readout nor the account
avatar shows, the Stories button goes icon-only under the corner-actions
column instead of covering the top row of icon buttons.
- Explore frames its start view and a picked story in the middle of the
map it leaves visible (beside the feed, above the phone sheet), with one
short correction if that area moved during the flight.
- The share icon stays visible in icon-only header buttons.
- A world clock nothing moved while Stories was open (no jump, same mode
and rate) is left alone on Close.
- Card images use the globe's own Esri tile URL; the credit list keeps the
application's full-screen placement on phones.
- Tests cover the live and playing clock restores, the clock coming back
after the share state, the tile-settling hold being released (settled,
10 s, Close), the visible-map aim, and the near-end Play fix in the
director's real order. One changelog fragment covers the PR.
Main now keeps Cesium behind the renderer contract, so Stories stops
reaching Cesium and the viewer directly.
- Camera: flights, the -60 degree story framing, cancel, the pose saved
on open and put back on Close go through the camera port; a follow is
released with stopFollowing.
- Pins: placed in the frame port's postRender from the query port's
projection and horizon test, still written straight to each pin's
transform on every drawn frame.
- Tile settling: a continuous-render hold until the globe port reports
the base settled, for at most 10 s.
- Clock: Close and Back to Explore put back the page's world clock (live,
or the time it showed, playing on), and leave a clock that is still
where it should be alone.
- Card images: drawn from Esri World Imagery's own Web Mercator tiles
while the Esri map stack is active, read as images; no Cesium imagery
provider is touched.
- THUMBNAIL: the director hands captureStoryThumb the frame port and the
renderer's canvas, so the scene document's module stays renderer-free.
- Credits: Stories places and keeps visible the application's credit
line (#gev-credits) and its list as well as the renderer's own display.
- Tests fake the ports instead of a Cesium viewer, and cover pins per
frame, the flights, the settling bound and the clock restore; the
share link tests Stories added build their manager over a camera port.
A Stories button (top right) opens Explore: a feed of GEV scenes over
GEV's own Cesium globe, with a pin per story. Explore opens at country
level over the first story and, while idle, flies on from story to story
for a minute. A picked story is framed in the middle of the view; a pin
plays its story on a second click. The Story page plays the scene through
SceneDirector with a timeline, chapters, key moments, sources and
background, then Close (or Back) puts the person's camera, clock, layers,
style and AUTHORING selection back. Open in GEV hands the scene to the
Scenes panel at its current shot.
Stories lists the scenes GEV ships with a camera path (while they are in
the project), the scenes saved with SAVE TO STORIES in AUTHORING, and the
person's other scenes as drafts. The person's own stories live in the
project on this device, so they have no Share; a link to a story that is
not here opens Explore and says so. Each shipped story's
context comes from what GEV knows: what it shows, the place each shot goes,
and each layer's data sources as DATA_SOURCES.md lists them; the Nepal
story carries the event pack's facts and CC BY-NC sources. Card images are
a captured THUMBNAIL or drawn from the keyless Esri World Imagery.
AUTHORING has no scene picker: it starts with no scene, NEW SCENE (or
CAPTURE SHOT) makes one, and Stories' Open in GEV selects one. Before SAVE
TO STORIES it offers topic tags and THUMBNAIL. A scene's stories flag,
storyThumb and storyTags are saved with the project and kept through
export and import.
Only the closed state loads with the page; the screens, styles, story data
and controller load on first open. Stories keeps its place in the query
(one history entry per screen) and holds the share link's hash writes
while open. Keyboard input and voice tools stay with Stories while it is
open. Explore's pins move on every drawn frame without asking for frames;
the idle tour and tile settling are bounded.
All strings are translated in the 13 locales.
Main brings the reviewed one-time-control and timeline-mark changes. They
keep this branch's renderer work: earthquakes draw through the draw port and
register their strong quakes as marks; the weather clock keeps `follows` beside
`world`; the weather layer measures ages and delays from the timeline time;
the Visual panel keeps its sky and weather groups under Effects. Tests that
moved time through the weather clock now move it on the world clock.
5150279cc, 97bd61711, 900c76425 and 4f23ad330 went to main, reviewed and
changed, as #1745. They are taken out here so main brings them in as
merged, rather than as two copies of the same changes in conflict.
A weather row's play ran the world clock at whatever rate it had, and
going live set that back to 1, so the speed chosen on the timeline was
lost. The world clock now keeps its rate while paused and live, and the
timeline's speed sets it whenever it is chosen, so any play runs at it.
A row's play starts from the start of the covered time when live or at
its end, as the timeline's does, and does nothing while every product the
row shows is suspended, as its reduced-motion note says.
Live, the Weather panel's frame time is the newest of each product's
frames, suspended or not, so it no longer goes away under reduced motion,
on a hidden page or without an imagery host.
A weather layer made without a weather clock builds its own when first
enabled rather than when made, so a layer never turned on leaves the
world clock alone, and its own clock (createWeatherClock({ shared: false }))
leaves the world's time where it is when destroyed; only the last shared
weather clock sends the world live.
On the timeline, a zoom or a pan clears the hovered tick's label, a label
is never wider than the track and ends in an ellipsis, and a mark's label
is cut to 60 characters (WORLD_CLOCK_MARK_LABEL_LENGTH).
The changelog entry says what a row's step does, names the earthquake
layer's new exports and says it registers with the world clock.
A layer's world clock coverage may now give each mark as an object,
{ time, label?, id?, kind? }, as well as a bare epoch ms number, and the
two may be mixed. worldClock.coverage() keeps marks as the sorted list of
distinct times, so existing readers are unchanged, and adds markDetails:
the merged marks in time order (then kind, label and id), each frozen and
holding only the fields given. Marks given alike by several sources appear
once, a bare time is dropped where a labelled mark shares it, and a mark
with no finite time is ignored. The contract is documented in the
worldClock JSDoc and docs/APPLICATION.md.
Launches label their marks with the mission's name (the launch's where it
has none), cut to 27 characters in capitals as the mission index shows
names. Earthquakes of magnitude 6 and up label theirs with the magnitude
as the map shows it and the feed's place cut to 40 characters, such as
"M6.4 · 113 km SSE of Lata, Solomon Islands"; the layer now tells the clock
when the labels change as well as the times.
On the timeline, a pointer within 6 px of a tick shows its label over the
track (nothing for an unlabelled mark), and a tap there goes exactly to
the mark's time instead of the point tapped. A tap elsewhere and a drag
work as before, and ticks stay ticks. The arrow keys still step from mark
to mark; with the handle on a mark, its labels follow the time in the
handle's aria-valuetext, and show over the track while it has focus.
The Weather panel kept a second time transport of its own: a slider, step
buttons, Latest and Play, backed by a replay in the weather clock that
stepped the observed frames every two seconds and went round from the last
to the first. The weather clock also attached itself to the world clock as
a driver, so the timeline's Play became that replay whenever weather was on.
The panel now shows the frame time only: the newest frame and its age while
live, the timeline time alone at a past time. The weather clock no longer
has setTarget, step, latest, play, pause or togglePlay, its state no longer
has playing, and it no longer drives the world clock. It still follows the
world time, registers each product's frames as marks the timeline's arrow
keys step to, holds its products, and gates the world's continuous play at
each next frame until it loads. weatherClock.world names the world clock it
follows.
A weather row's play, latest and step params move the world clock as the
timeline does: play toggles continuous play (from the start of the covered
time when live), latest goes live, and step goes to the previous or next
mark. The rail timeline component, which only the panel used, is removed,
along with its unused messages in every locale.
A layer's world clock coverage may now give each mark as an object,
{ time, label?, id?, kind? }, as well as a bare epoch ms number, and the
two may be mixed. worldClock.coverage() keeps marks as the sorted list of
distinct times, so existing readers are unchanged, and adds markDetails:
the merged marks in time order (then kind, label and id), each frozen and
holding only the fields given. Marks given alike by several sources appear
once, a bare time is dropped where a labelled mark shares it, and a mark
with no finite time is ignored. The contract is documented in the
worldClock JSDoc and docs/APPLICATION.md.
Launches label their marks with the mission's name (the launch's where it
has none), cut to 27 characters in capitals as the mission index shows
names. Earthquakes of magnitude 6 and up label theirs with the magnitude
as the map shows it and the feed's place cut to 40 characters, such as
"M6.4 · 113 km SSE of Lata, Solomon Islands"; the layer now tells the clock
when the labels change as well as the times.
On the timeline, a pointer within 6 px of a tick shows its label over the
track (nothing for an unlabelled mark), and a tap there goes exactly to
the mark's time instead of the point tapped. A tap elsewhere and a drag
work as before, and ticks stay ticks. The arrow keys still step from mark
to mark; with the handle on a mark, its labels follow the time in the
handle's aria-valuetext, and show over the track while it has focus.
The Weather panel kept a second time transport of its own: a slider, step
buttons, Latest and Play, backed by a replay in the weather clock that
stepped the observed frames every two seconds and went round from the last
to the first. The weather clock also attached itself to the world clock as
a driver, so the timeline's Play became that replay whenever weather was on.
The panel now shows the frame time only: the newest frame and its age while
live, the timeline time alone at a past time. The weather clock no longer
has setTarget, step, latest, play, pause or togglePlay, its state no longer
has playing, and it no longer drives the world clock. It still follows the
world time, registers each product's frames as marks the timeline's arrow
keys step to, holds its products, and gates the world's continuous play at
each next frame until it loads. weatherClock.world names the world clock it
follows.
A weather row's play, latest and step params move the world clock as the
timeline does: play toggles continuous play (from the start of the covered
time when live), latest goes live, and step goes to the previous or next
mark. The rail timeline component, which only the panel used, is removed,
along with its unused messages in every locale.
Live counts repaint the rows many times a second; the index now reads its
headings at most once a frame, and only when a heading changes. The label
goes before the tick when there is no room after it, as in a right-to-left
language, and the ticks sit at the panel's inline end.
Co-authored-by: Manjunath Paparaju <[email protected]>
- Escape in the field closes the search alone, focus back on its button,
without folding the panel or leaving the cockpit.
- The category is the group's key (LayerRows' data-group), so a language
change keeps it; a group that goes away clears it.
- On and Off follow whether the layer is enabled, not its feed's state.
- The filter is a disclosure of two groups of toggle buttons: opening it
focuses the chosen option, the arrows, Home and End move, Escape closes
it, and it stays inside the panel.
- No layers match is translated, the search matches names only, and the
rows are filtered once per frame at most.
- A voice request to show a layer the finder hides clears the finder.
Co-authored-by: Manjunath Paparaju <[email protected]>
The group label is drawn on the page just outside the panel's edge instead
of over the rows; the panel clips what leaves it, so the label is teleported
to the body and placed from the tick. The finder shows focus as a soft ring
on the field's frame in place of the hard outline round the bare input.
Co-authored-by: Sameh Khamis <[email protected]>
The Data Layers panel gains a search field, an All / On / Off and category
filter, and a tick index down its side for jumping between sections. Both
sit beside the Data Library browse control.
Co-authored-by: Sameh Khamis <[email protected]>
Cyber and the phone keep their own cockpit layouts. Display and Radio take
their top from the layout pass, whose floor now matches the left rail, so the
panel's height still stops short of the briefing. The rail keeps its physical
side in a right-to-left language, the Live Signals rows use logical sides,
and rules for the launchers' old strips, which the rail hides, are gone.
Co-authored-by: Manjunath Paparaju <[email protected]>
In cockpit the left rail now shows Data Layers only: Visual's rail item
and panel are hidden there, as Authoring and Utilities are, and the
cockpit's own Display panel stands in for it. The rules that trimmed
Visual's groups in cockpit are removed as no longer reachable. If Visual
was open on entering cockpit, the rail's sliding highlight no longer
stays where its hidden icon was.
Co-authored-by: Sameh Khamis <[email protected]>
In cockpit, the Visual panel hides the HUD, detection, parameters and
3D-model groups, which the cockpit's Display panel already offers, and
the celestial ring toggle. It keeps Look, Map source, Scope, Bloom and
Sharpen.
Co-authored-by: Sameh Khamis <[email protected]>
Live Signals rows drop from 43.5 px to 36 px with less padding. The local
weather tiles lose the lit grid that showed between them, stand 5 px apart
as cards and shrink from 60 px to 53 px, so all four fit the shorter
window.
Co-authored-by: Sameh Khamis <[email protected]>
- The left rail shows Data Layers and Visual in cockpit view; Authoring and
Utilities are hidden along with their slots and panels, so no empty
pieces are left behind.
- With a panel open there, each icon left is its own island; a hidden
panel still open underneath leaves the rail in one piece.
- The cockpit's Display and Radio rail uses the main rails' 12 px spacing
and draws each icon as its own island while a panel is open.
- Contact and Live Signals stand shorter (min(27vh, 260px)); Contact's
buttons share the kicker's row and its subject runs full width on at
most two lines.
- Edge scrolling skips rail items that are not shown.
Co-authored-by: Sameh Khamis <[email protected]>
The cockpit's Display and Radio panels get the compact dark styling of the
rest of the shell, a header with the edge switch and collapse, and a rail.
Co-authored-by: Sameh Khamis <[email protected]>
The card skin stands aside under the Cyber HUD; the pills are decoration
for screen readers, the buttons carry aria-pressed, and Clean UI, an action,
has no pill. A collapsed Visual hides its new parts too.
Co-authored-by: Manjunath Paparaju <[email protected]>
The More sheet already shows the dock's Visual Presets tray right above
Visual, so the panel's own copy is hidden on the phone shell.
Co-authored-by: Manjunath Paparaju <[email protected]>
The panel's new headings, the scope opacity slider and the reset are
translated in every language, and the presets' names and descriptions use
the dock's translations. The cards' on/off pills take their words from the
locale instead of fixed English. VISUAL, the panel's name on the rail and in
its header, gets its own translation context: several languages had it as
"visible", from the satellite class of the same English word.
Co-authored-by: Manjunath Paparaju <[email protected]>
The Display panel is regrouped as Visual (Look, Overlay, Effects) with style
presets, a scope opacity slider and a reset to the default look. Scope
opacity is carried in share links as field 30 and as the legacy sco
parameter; 100 is the default and is left out of a link.
Co-authored-by: Sameh Khamis <[email protected]>
Phones and Cockpit keep their own layouts and do not show the switch. The
rails' name panels and edge mode run toward the middle in a right-to-left
language, and the switch reads its side again after the layout moves it.
Co-authored-by: Manjunath Paparaju <[email protected]>
Nothing replaces them on this branch yet, so the dock keeps them. The credit
pill and the HUD spacing built on it are left for a change of their own.
Co-authored-by: Manjunath Paparaju <[email protected]>
- The right rail now starts level with the left one whether or not a panel
is open on it. It used to rise to 4% of the screen when one was open,
which in Tactical and Cyber a top-right readout pushed back down, but in
Minimal (which has none) left it about 35 px above the left rail.
- Minimal no longer shows its full-width coordinate strip above the corner
coordinates block, which showed the same position twice; it keeps the
corner block, where the other layouts have it. This changes upstream's
Minimal layout.
Co-authored-by: Sameh Khamis <[email protected]>
When a panel opened or closed, the rails' labels eased their width, which
stretched and shrank every button in the rail. On the side rails the
labels now fold away and come back at once; only their fade eases.
Co-authored-by: Sameh Khamis <[email protected]>