The navigation controller and the location navigation cancel flights and
read the camera's place through the camera port. Point-and-ask's camera
pose key and its "around here" radius read the camera port's pose; its
entity pick moves into the input dispatcher (pickAt), which picks as a
click does, so the follow's helper still reads as its target.
navigationController, locationNavigation and pointerPick leave the Cesium
allow-list. Their package entries (./ui/navigation and three voice
entries) no longer load the Cesium adapter: given a viewer of a
caller's own, they find its camera once the caller loads
./render/cesium/unbound. They are listed as such in the unbound camera
test, which fails if one starts loading the factory again.
Flights and military follow their tracked aircraft with an
entityFollowTarget: framed in ENU from viewFrom, never closer than
150 m, presentation read from the drawn entity's record. Satellites
follow in Cesium's autodetect frame. The layers' own framing
(applyTrackedCameraFrame) goes; the port's follow has the same
close-range rules, and trackedCamera.js no longer imports Cesium.
The port's helper entity draws nothing: its point's outline is
transparent too, and click and voice picks of it count as picks of
the target's drawn entity. The fake camera binder follows when the
fake has Cesium's entity tracking.
src/data/followed.js answers what the camera follows: the camera port's
target, or the entity a layer still tracks itself, seen through the same
fields. Ownership checks, render holds, guards, voice actions, the CCTV
pacing and the navigation release paths read it instead of Cesium's
trackedEntity, so they keep working when layers follow through the port.
The release paths stop following, cancel the flight and release the
camera through the port. The rotate refusal names the followed target by
its name or label title.
A throw from the crop capture now has a test that it closes its decision with an error outcome. Direct calls to the crop and image senders pin the channel-closed and pointer-scale-not-useful skips. The docs say a send decision requests an image, and when a pointer snapshot counts as already requested.
The Cesium camera port gains move, look, rotateAround and zoom, and the
browser conformance run now checks them, the lookAt-frame commands, the
changed thresholds and moveEnd (timed by the clock, not a frame count).
Orbit, the Bhote Koshi focus and cinematic, the launch zoom anchor and
replay chase, the camera verbs' motion tick and roll levelling, and
voice zoom write through the port.
Street Level: keep the PR's billedPerImage contract note beside main's keyReady, and both sides' layer tests (armed OPEN, failing source) and (keyless default lighting).
The scene director's shot flights, start pose and stops, the annotation
framings and fly-to, the voice overhead framing and the local GeoJSON
click flight now drive the renderer's camera port. The director's stops
look the camera up with findCamera: teardown can run after the viewer is
gone, and then there is no flight to stop. The local GeoJSON flight,
part of the public infrastructure export, works on a plain Cesium viewer
through the unbound camera, and looks it up before taking its input
hold. Voice zoom stays for the move slice.
Third review pass on #835. No runtime change.
- Controller test: viewport decisions reach the controller's debug log.
- Policy test: a second request for a snapshot still being captured is
logged pointer-already-requested and is not captured twice.
- CURRENT-STATE: pointer-not-fresh also covers a missing snapshot,
already-requested covers an earlier attempt that threw, and the image
step runs when any tool output of the response was sent.
- Changelog: describe what is recorded rather than a fixed miscount.
Second review pass on #835's diagnostics. Behaviour is unchanged.
- Report viewport_context.result as soon as the send returns, so a throw
in the retained-frame bookkeeping cannot log a real send as "error".
- List the decision reasons and when each field is present in
CURRENT-STATE, note that the rate limit can split a pair, and say which
codes are defensive.
- Changelog: the decision is logged when an entity-context answer reaches
the image step, not for every answer.
Review follow-up for #835. What is captured, sent and kept is unchanged.
- Log nothing for tool results other than get_entity_context, so other
tools stop spending the shared debug-log budget.
- Give every decision and outcome the same contextId and image kind, so
overlapping requests pair up.
- Log why a crop decision did not send (stale, off ground, off screen,
expired, pose changed, already requested) instead of leaving a lone
"pointer-ground-crop" that reads as sent.
- Split capture-invalidated into session-reset, superseded, channel-lost
and frame-stale.
- Close the pair with "error" when a step throws, then rethrow.
- Document the events in CURRENT-STATE and reword the changelog fragment.
Wildlife Sightings (#1591) published share token 9, so News takes the
next free token, 00. The token tests read the ledger before both where
they were written against it, and the README counts both layers.
Main's wildlife-sightings layer took share-link token 9, so shipwrecks
takes the next free token, 00. Locale, docs, format-scope and voice
manifest conflicts keep both sides. Ledger and registry tests now model
the ledger before shipwrecks took 00, and layer counts include both
new layers.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The Cesium camera port moves into render/cesium/camera.js, with the
listener list and position conversion shared from common.js. It now
covers flights (flyTo, flyToBounds, cancelFlight, flying), lookAt and
release, command hooks, and a flightEnd event for the flights it starts.
A flight's end that Cesium raises inside one of the port's own calls is
delivered once Cesium's call returns, so its callback sees the flight
let go of. A flight Cesium declines to start, mid scene-mode morph,
ends as cancelled instead of never settling.
Flight traces run in Node on the recorder's headless camera with a
virtual clock; the browser harness keeps the instant traces.
The startup fly-in, landmark and viewport flights, share-link restore
and the shell's camera state now go through the port. camera.js and
sharelink.js leave the Cesium allow-list.
Address samehkhamis's review on #1113:
- show_street_level checks the turn, the camera's owner (navigation stamp,
re-taken where its own flight lands, or a press/wheel on the globe) and
the hiding modes after the flight, the map switch, the layer switch-on and
the lookup; a photo that opened after either is closed again. The hidden
panel is also refused before the flight.
- An open photo closes before a new request arms or looks up, so a place
with no imagery shows its own error.
- The panel posts every view with `fresh`; the inline app opens a billed
photo only for a fresh one.
- A passed-through view's street_level point moves with a new camera
position; revealPanel does nothing above 720px, scrolling included.
- Document that the app's own links do not carry `sl`.
The trim that fitted the tilt wording under the Realtime prompt ceiling dropped the -45° default from pitchDeg, so the model no longer read why a bare tilt goes oblique. pitchDeg reads 'Absolute; -45 default, -89 top-down.' again, and the direction description becomes 'Pan/rotate/tilt steps; orbit/rotate_globe default right.' to pay for it: the Overpass prompt measures 55,499, 1 under the 55,500 ceiling. The schema pin and the measured-size note follow.
A pivot range rebuilt from the camera's position came back a hair over the 1,000 km cutoff when the view sat exactly on it, so a tilt from 1,000 km ran in place and lifted the crosshair onto the sky. The cutoff now allows 1 m of slack.
A zoom during a tilt to an angle changes the range the pivot holds, and with it the place's horizon limit, but the tilt kept its old goal and its reply its old angle: from 400 km, a tilt to -5° zoomed out x2.5 reported -5° with no note and ended at -9.4°. The zoom now re-judges the goal at the new range, eases the tilt from where it is to it, and its result names the angle the tilt now ends at, with a note.
Gemini runs one turn's calls one after another. By the time "pan left" ran beside "fly to Xyzzyville", the lookup had already found nothing, so there was no flight to wait on and the pan moved the old view with ok: true. OpenAI's parallel calls refused the same reply.
The runner now remembers, for the latest reply that sent a voice fly-to, whether one moved the camera and whether one found nothing. A tilt, orbit, pan or rotate of that reply with no flight left to wait on is refused when its fly-to found nothing and none moved. The reply is Gemini's turn, passed as a per-turn reply object, or OpenAI's authorityGroup. A motion in a later reply, or beside a fly-to of the same reply that did land, runs as before.
A motion queued behind a voice fly-to checked only that its reply was current and that the user had not touched the map. A location-panel search, share link or file import stamps a deferred navigation without stopping the flight, so the flight landed, the motion took navigation, and the search's reassert then failed: the search was silently dropped while the camera kept orbiting.
The runner now counts camera handoffs from subscribeCameraHandoff, less the ones voice fly-tos make themselves, and each voice flight records that count when it starts. A motion whose flight saw another navigation since then is not run and says so. Voice fly-tos' own stamps do not count, so a later fly-to in the same reply, including a lookup that finds nothing, is still followed as before. The test harness now publishes handoffs and stamps its voice lookups, as the shell does.
Events ▸ News draws the last 24 hours of reports from curated hotspots
(Ukraine–Russia, Israel–Gaza–Lebanon, Iran–Hormuz, Yemen–Red Sea, Sudan,
Sahel) and developing situations elsewhere, from any server that answers the
`/api/news` read routes.
- Globe: one marker per merged event, clamped to the ground and culled at the
horizon; one beacon per hotspot when zoomed out and a pulsing beacon for a
developing situation; hotspot outlines with disputed areas dotted and
labelled by who administers and who claims them; picture cards for at most
ten major or fast-growing events with two or more sources, never
overlapping, switchable off.
- Panel: hotspot chips, a severity filter (significant and above by default),
categories, minor news off by default, and a scrolling list of event cards
with picture, headline, place, sources, age and the sides that reported it.
"In view" lists what is near the map below 3,000 km once the camera
settles. A card flies the globe to its event and opens it with a link to
the publisher. Reduced motion stops the pulse and the flights.
- Core serves no news itself: the local server proxies GEV_NEWS_ORIGIN when it
is set, and answers 503 unavailable otherwise, so the layer reads "not
configured" once instead of retrying.
- Share token 9 (enabled-only); voice stays off for this layer.
With main merged, the Overpass prompt measured 55,549 against the 55,500 ceiling. The pitchDeg and direction descriptions now read 'Absolute; -89 top-down.' and 'Needed for pan/rotate/tilt steps', bringing it to 55,497. The schema pin and the measured-size note follow.
Voice actions read degrees from ECEF positions with toLonLatH and
measure distances with src/geo, at the sites that only did maths. A
position that converts to NaN now reads as unknown, never as NaN
coordinates. The analyst test gives its subject a real ECEF position
instead of patching Cesium. Sites that keep a Cesium Cartographic, or
use the camera or picks, wait for the renderer ports.
Recent community wildlife observations, as a new Wildlife group in the
layer panel.
- Server: keyless iNaturalist proxy (v2 observations with only the
projected fields; undocumented v1 UTFGrid density tiles, decoded on the
server) sharing one paced queue (burst 4, ~1/s, 60/min, 8,000/day budget,
up to four in flight), in-memory caches and upstream-only cooldowns;
Acartia Salish Sea marine-mammal feed rounded to 0.01 degrees with
comments dropped.
- Layer: grid counts drawn as a soft view-ranked density glow; real sampled
sightings as taxon badges at their true positions with ambient photo
thumbnails and labels; obscured records stay privacy cells; a clicked
sighting stays pinned through camera moves and refreshes.
- Anchored photo card per selection with the single iNaturalist link;
attribution in the layer row and the Data attribution popover.
- Filters (CONFIRMED, taxa presets) round-trip in share links with token 9.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Review fixes for gekh's #1113 round:
- a link runs show_street_level with origin 'programmatic', so its source
switch and layer are not saved as the recipient's preferences;
- with no place named, the action looks under the screen centre
(aim 'screen-centre', armed false), keeps the sky refusal and leaves a
link's armed point alone;
- an armed OPEN aimed at the sky opens nothing instead of the far link point;
- an imagery-stage failure is spoken as an error, missing imagery as missing
(street.nearestOutcome); the card says "the view centre" in the interface
language;
- every photo the action opens reveals its panel, and revealPanel scrolls the
panel into view in the phone sheet;
- embed: EXPAND survives embed's own clean view, the lifted photo hides in
cockpit, recording and scene playback, and a failed photo step closes the
earlier photo before the view flies;
- links pasted into an open tab run their street-level step after the
restore settles; a superseded start link does not;
- Mapillary's nearest search gives up after 12 s, body included.
The Transit prompt said "Fly below 3,000 km", but the closed gate opens at
2,850 km; it now names the enter threshold, as Bike Share does. When the
camera changes coverage, Transit and Bike Share ask the Layers panel to
repaint instead of leaving the old prompt up until the next 15 s / 60 s tick.
Over a city with no feed or system (London, Tokyo) both rows read
"ON · — · never", the same as a feed that never answered. Transit already
computed a coverage note but put it only in `coverage`, which the row does
not show; Bike Share reported nothing at all.
Both layers now report a `zoom-in` guidance status with a `statusMessage`:
"Fly below 3,000 km to a covered region" / "No feed here yet · N regions
available" for Transit, and "Fly below 48 km to a covered city" / "No bike
share here yet · N systems available" for Bike Share. A loading or failed
Bike Share city keeps its own text. Leaving coverage clears the layer's
last-update time, so the row no longer dates data it no longer draws.
The coverage-note translations move from the voice card into
`translateStatusMessage` (ui/statusText.js), which the Layers row and the
voice card now share.
A new Events layer maps shipwrecks with a card per wreck:
- EMODnet Human Activities heritage shipwrecks (about 6,500 in European
waters, CC BY 4.0), skipping rows taken from wrecksite.eu.
- Wikidata shipwrecks with a Wikipedia article plus sinking events
(CC0); an event folds into its ship for the date and death toll.
- A same-origin /api/shipwrecks proxy refreshes once a day and serves
the last snapshot as stale for up to a week.
Markers are a boat icon coloured by era and sized by deaths; four era
chips filter the layer. The card follows the air-accidents layout
(deaths first). Text that names people is dropped; victims appear as
a count only.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- A tilt's angle, limits and "unchanged" check use the camera's own
pitch. At regional range the pivot pitch is up to about 8 degrees
shallower, so "tilt to 5 degrees" from 900 km ended at -12.9 degrees.
The swing now solves for the pivot pitch that gives the camera angle.
- A zoom out during a pivoting tilt stops at the 1,000 km pivot limit
instead of the orbit's 5,000 km, and a zoom in that reaches the
clearance is applied before the pivot ends.
- An angle the camera already holds still takes navigation, so it stops
a running motion and releases the follow camera.
- A motion queued behind a fly-to moves to a newer fly-to as soon as it
begins, so a stalled lookup no longer holds it past a flight that
landed. Wait listeners are removed when a wait ends, and a lookup that
found nothing points straight at the flight that moved.
- A fly-to that stops a running motion names it (stoppedMotion).
- A tilt left or right is refused, and the pitchDeg description says
steps use direction.
Cockpit entry no longer needs Contacts or both flight feeds: a civilian
aircraft needs Live Flights, a military one Military Flights. Contacts and
every other layer can be turned on or off before or during a session, and
turning off the ridden layer ends it. A Context mode change in flight still
blocks entry.
When the other air feed is off, Live Signals and the Contact card say
FLIGHTS FEED OFF or MILITARY FEED OFF · PARTIAL PICTURE instead of
presenting a partial picture as complete. Voice refuses entry with
subject-layer-off rather than contacts-inactive, and its tool description
says Contacts is not required.
Double-clicking the followed aircraft enters Cockpit through the same gate.
The Cockpit takes the scene's double-click before Cesium's stock handler,
which would otherwise untrack a followed aircraft whose model is a
primitive. The entry also shows under the Intel HUD readout, sharing the
Contacts button's face. A test keeps the classes the Cockpit adds to the
body from matching another element's rule.
Arabic catalog strings carry optional marks ("تتبّع"), but people type
without them, so "تتبع" found no suggestion. Fold the marks out of both
the draft and the candidates before comparing.
- Host test switches AI Provider from chat Settings through the real
provider commands and checks the new mount keeps chat's context, frame,
Back to chat and focus on the provider choice.
- Drop the open and minimized branches of the carried presentation: the
provider choice lives only in Settings, so chat is never open then.
- One showChatSettings helper for the gear and the restore, and one
isStoppable helper for the live-or-error check in chat and the panel close.
Every layer and tool bound its own ScreenSpaceEventHandler and picked the
same click again: with the usual layers on, one click ran about 26
scene.pick and 2 drillPick passes (120-215 ms in NYC with 18 layers). Pointer
input now comes in through src/input/dispatcher.js, one handler per scene.
A click is picked lazily and at most once per kind of query, and every
subscriber reads the same ClickEvent (pick, hit, id, ownerId, gesture,
drill, ground). The same click now costs 3 picks and 2 drills, 17-70 ms.
- Ambient onClick subscribers run only while no tool holds the pointer,
checked once per event; tools subscribe with their lease. Moves and
releases always reach ambient subscribers, so hover and drags end cleanly.
- Camera input and the viewer's stock select/track clicks are ref-counted
holds (suspendCamera, suppressStockClicks). The dispatcher owns the
controller's enableInputs, so a Cesium flight that ends no longer turns
input back on under a drag or the cockpit.
- The draw tool, imagery box, CCTV gizmo, cockpit, directions and every
selecting layer use it; bindTrackingClickGesture is gone (the gesture is
on the event). A source scan forbids new handlers, enableInputs writes and
stock-click removal outside the dispatcher.
- The sensor-style pick correction transit had now applies to every layer.
- Radio's 8-pick near-miss ring is one 17x17 windowed drill.
- A missed pick passed to pickContact is no longer picked again, and a
touch tap's contact search shares the click's drill.
- A gizmo drag whose release Cesium never reported ends on the next press
instead of leaving the camera held.
The dispatcher is exported as ./input with the pointer-lease functions, and
documented in docs/APPLICATION.md.
Switching AI Provider in Settings opened from chat rebuilt the voice
control, so Settings fell back to voice and the dock went idle, widening
the wings. The switch now carries chat's Settings, or chat itself, to the
new provider as it already carries the input mode; the conversation still
starts fresh and focus stays on the provider choice.
After a voice error, opening chat or closing the voice panel left the dock
red on ERROR, because both stopped only an active session. They now also
end a session left in error, which returns the dock to idle.