KartaView's server filters by upload date only, so SINCE goes by it
throughout for KartaView: the lines (as before), the photo a click opens
and the cones, the cut-off taken as its UTC day as KartaView's startDate
(passesKartaViewFilter). Providers may declare sinceBasis: 'upload'
(validated); while one is lit the panel shows "KartaView: by upload date"
under the SINCE slider, read out with it. The gate checks the note, and
step 13's picks get 60 s on a loaded machine.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
KartaView filters coverage on its server only in its PNG tiles (its JSON
tiles come back empty with a filter), so a filtered tile's PNG is a mask
over the cached JSON segments: a segment stays when at least half the
points along it lie on drawn pixels. A filter change reloads the lines
(lineCoverage.reload keeps the drawn ones until the new ones are in);
masks are cached per filter and tile, and a filtered tile KartaView is
still drawing (504 or a timeout) is asked again, four tries in all.
The nearest lookup asks the photo API for the projection and date, and
the cones follow the filter like Mapillary's. The gate fixture draws
filtered PNG tiles and adds an older flat-only street; a new gate step
checks 360 and LAST YEAR thin KartaView's lines and ALL brings them back.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Marker and direction (reported on the PR):
- KartaView has its own marker, a purple view cone (Street View's is
blue), not GEV's default pin that Mapillary uses.
- The camera direction (marker, cones, FOLLOW, a panorama's centre) is
the direction of travel to the next photo a few metres on. KartaView's
heading is the device compass: whole drives read 0 (no compass) and
others sit a steady ~110° off. Until the drive loads the compass stands
in (0 = unknown), and the pose is sent again once the course is known.
Remaining P4s from the review of #1121:
- Segment chaining is linear (a per-point cursor) and capped at 20,000
segments a tile and 5,000 points a line: a hostile tile of 60k segments
sharing one point took 1.5 s, now tens of ms.
- Decoded tiles are dropped when KartaView is switched off.
- No network / a refused request says so and is not retried as a timeout;
an unreadable answer says so.
- A docked flat photo skips the 2,560 px download until the viewer grows.
- The panel counts the drive's photos (countActivePhotos), not the thinned
page of cones (2,250, not 217).
- After a GPU reset the viewer redraws the photo itself, so a lookup the
user started is not cancelled; a failure is still reported.
- The gate's keyless page lights KartaView and checks it draws with no key;
the fixture answers the sequence count; the line-click step checks the
camera looks along the drive when the compass says 200°.
- README/CHANGELOG show the share-link form the app writes.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
P1s from the correctness review, each with a regression test:
- Cones showed the wrong page of a long sequence (cache keyed by
sequence; no re-centre after a close or a same-drive line click):
KartaView always reselects, and re-centres whenever a photo of the
selected sequence opens on another page.
- A 360° photo's first frame was one colour: the canvas was sized while
hidden (1×1). It is shown first, and re-measured every frame.
P2/P3s: a storage timeout or 5xx is not remembered as archived (only
403/404/409/410 are); dense z13 tiles draw up to 1,600 lines (a third of
downtown Detroit was cut); decoded tiles are kept 10 min; a timed-out tile
is asked once more; pages are 250 photos and the newest page request goes
first; a photo far past deleted ones, or unlisted at a page edge, still
finds its neighbours; a step that gets no answer is not the end; a lost
WebGL context redraws the photo, and a failed one is retried on the next
mount; the first flat image comes from the proxy (KartaView's own can be
1.7 MB); fileurl fallbacks must be https storage hosts; oversized answers
are refused; keyboard (Shift+← →, ↑ ↓, + −) and pinch look around a
panorama; focus stays in the viewer when a step button disables. Docs:
share links with 0.m.0, keyless count, CURRENT-STATE matched to the code.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The fixture gate answers api.kartaview.org, cdn.kartaview.org and
*.openstreetcam.org from fixtures (a drive with a 360° photo, stored on
storage2 while the API names storage1) and adds three steps: keyless
coverage with its credit and hidden filters, a line click opening the
nearest photo with cones and ›, and a 360° photo on the panorama without
FIT / FILL. The Street View share-link check reads the switch field instead
of one exact entry, since a chip click records every provider's switch.
README, DATA_SOURCES, CHANGELOG and CURRENT-STATE describe KartaView.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- One provider is lit at a time: lighting a chip darkens the others, and a
chip click records every registered provider's switch in one update so
the share link keeps the swap (also off Google 3D, where Street View is
not listed). The layer starts with the first default-on provider
(Mapillary, free); params that light several keep the one already on,
so reapplying them never flips (litByParams). The now-unreachable
"several lit" chip paths are gone.
- Leaving Google 3D during a Street View lookup ends it without an error
or a stuck loading state (openImage's early return resets it; the
lookup loop rechecks availability).
- A source swap during a lookup no longer reports "no imagery".
- Street View lit off Google 3D says the panel needs the Google 3D map.
- Comments trimmed to the why; keySetupCore.test.mjs back to upstream's
formatting plus the one new test (was a 551-line reformat).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- The chip reads GOOGLE STREET VIEW (and its caption link likewise).
- Providers declare the imagery filters they honour (`filters`, default
pano + since). Street View declares none: every panorama is 360° and it
draws no coverage to thin, so its lookups ignore the filters and the
panel hides IMAGERY and SINCE while it is the only lit provider.
- The legend lists only providers that draw coverage lines, with
Selected only beside one: Street View alone shows no legend.
- Providers may pick their on-globe marker (`marker`); Street View's is a
Google-blue field-of-view cone from a white-ringed dot, in place of
GEV's amber pin, and switches back for a Mapillary photo.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Conflicts with upstream's Street Level provider composition and share-state
codec, resolved:
- Street View's switch moves from its own share option (`g`) to upstream's
provider-switch field (`r`, e.g. `0.r.google-1`); a link without it keeps
Street View off. Docs and the browser gate follow.
- createApplicationStreetLevel keeps upstream's injectable provider list;
its default, once the application supplies its Street Level source, is
Mapillary plus Google Street View. Without that source there are none, as
upstream intends.
- The coverage hint keeps upstream's empty-composition message and joins
every switched-on provider's hint otherwise.
- CHANGELOG, README and SECURITY keep both sides' entries.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- OPEN STREET VIEW in the PROVIDERS row opens Street View's nearest
panorama at the ground under the middle of the screen, without moving
the camera: Street View no longer needs a pointer. It is disabled (and
says so) until the camera is at street zoom.
- Off the Google 3D map Street View does not appear at all: no chip,
legend swatch, globe credit, layer source or button, and Google's script
is not loaded (the viewer has no prewarm; the script loads on first use).
The share option keeps the user's choice for when Google 3D returns.
- A ground click measures the camera height at the click rather than
reading the cached flag.
- A chip without a usable key explains it instead of lighting; it darkens
beside a lit chip, and the other chips keep switching, so a refused
Street View key cannot lock Mapillary out.
- The gate checks that nothing of Street View shows off Google 3D even when
a share link switches it on, presses OPEN STREET VIEW on Google 3D, and
asserts that each chip it switches really switched.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Google's Maps Platform terms forbid Street View imagery beside non-Google
maps, so the provider declares requiresMapStack: 'photoreal': off Google
3D its chip is dashed with the reason, lookups and opens skip it, and
leaving Google 3D closes its panorama.
- Ground clicks: only a click on the map itself (scenePick.isSurfacePick:
nothing picked or Google 3D tile content) at street zoom opens Street
View, and the camera stays put; higher up the hint says to zoom in.
scenePick.pickGroundPosition replaces the copy in Directions.
- Viewer: poses go out at once and again when the date and address
arrive, so an open never hangs on that lookup; one lookup per panorama,
seeded by the nearest lookup; a close settles a pending open; failed
lookups are asked again; poses follow position changes, not pano_changed.
- Loader: the gm_authFailure handler is installed once, so a retried load
reports a refusal once.
- Viewer host: a prewarm that lands after another provider took the host
is released; FIT/FILL availability is set on every open.
- Provider: a refusal while switched off reports no error over another
photo; SINCE compares against the end of Google's month; messages name
the referrer and network causes; FLAT says Street View is 360° only.
- The layer row names the key of the providers that are on; the MCP panel
CSP admits Street View's tiles, control images and photos.
- Tests for each, against fakes that now follow Google's event order; the
browser gate restores its state, waits instead of sleeping, aims its
panel clicks and corner drags, and asserts the camera stays put.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Google Street View registers beside Mapillary as provider `google`. It runs
on the Maps JavaScript API with the browser GOOGLE_MAPS_API_KEY, loaded on
first use (mapsLoader.js), and uses Google's own StreetViewPanorama as its
viewer adapter, emitting provider-neutral poses (address and month in the
caption, a link to Google Maps, steps along Google's arrows, FOLLOW on
Google 3D). Its chip starts off because every panorama is billed to the
key; the share option is `g`.
Google offers no coverage layer for other maps, so the provider draws
none: with it on, a click on bare ground at street zoom opens its nearest
Google-collected outdoor panorama (groundClick.js). A key Google refuses
reads KEY REJECTED and fails a pending open at once; a lookup Google never
answers fails after 10 s.
Core: providers may declare `groundClick` and `defaultOn`; poses may carry
`capturedAtPrecision` and `title`; the coverage line keeps every
provider's hint; opening one provider's image releases another's
prewarmed viewer; FIT/FILL hides for viewers without render modes. CSP
script-src admits https://maps.googleapis.com. The browser gate gains two
Street View steps (the keyed one skips as 'no Google key' in CI).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Credit the equivalent contribution in PR #959 alongside PR #934, while preserving the original PR author's commits.
Co-authored-by: shirunjies8-png <[email protected]>
Fixesbilawalsidhu/gods-eye-view#927. Each stdio MCP server made its own
random panel key, and panel_request accepts only the key in the panel
page. A client that starts two server processes for one connection and
reads the page from one while sending the page's requests to the other
(seen in Claude Desktop on Windows) therefore always got "Only the God's
Eye View panel may make this request".
The stdio entry now passes a key shared by the install, created once in
.gev-cache/mcp-panel-key. The file is staged 0600 and published with
link(), so processes starting together agree on one key and never read a
half-written one. If it cannot be stored, the process keeps a key of its
own, as before. createLocalMcpServer still makes a fresh key unless given
one, so in-process servers (the /mcp HTTP plugin, tests) are unchanged.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Trim the doc text this PR adds (README, CHANGELOG, CURRENT-STATE,
KNOWN-ISSUES, SECURITY, DATA_SOURCES, .env.example, the CI job comment),
drop code comments that restate the code, cut design-note JSDoc to a line
or two, and drop review tags from test names. Comments only; no code
changes.
Also: README key count (seven keys, two metered), CURRENT-STATE's gate
paragraph (CI runs a production build with a dummy token), the stacked
doc above meshBoxInRange and the orphaned inMeshRange line in
coverage.js, and a duplicate ALPR row in DATA_SOURCES that a merge had
brought back.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
From the IC8 review of #768, each with tests that fail before:
- P2: the expanded viewer is a real modal: while it is on screen every
other <body> child is inert (only the ones it set are restored, on
shrink, close and destroy, and when Clean View/recording/cockpit hide
it). The voice pill and toasts are not clickable while it is expanded.
- P2: the tile proxy follows redirects by hand, at most 3 hops, each one
HTTPS on exactly https://tiles.mapillary.com without credentials;
anything else is a 502 and the token never leaves that origin.
- P2: the real dev and preview server smoke tests request
/api/mapillary/status and a tile, and the browser gate first checks the
server's real status route before any interception, so CI fails if the
Mapillary plugin is not registered.
- P2: both gates press panel headers through one shared helper
(scripts/qa-panelDrag.mjs): re-resolve the header until it is under the
pointer, record what the press hit, wait on the real floating/docked
state, and retry only a press that provably missed the header.
Verified: unit 5910 pass; fixture gate 17/17; panel gate 5/5; live gate
with a real Mapillary token 22/22.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
From gekh's review of #768, each with a test that fails before:
- The routes refuse cross-site requests (sameSiteGated, as the paid
proxies do) and the tile route has a generous per-IP limit (600/min), so
another page cannot burn the token's quota or trip the shared 429 hold.
- At most six upstream fetches run at once; a queued request that is
abandoned never fetches, nor does one abandoned during the disk read.
- A body past the 48 MB cap aborts the upstream request as it streams.
- Empty tiles are charged against the memory and disk budgets.
- Each disk write uses its own temp file and a retrim is skipped while a
write of that tile is pending, so concurrent hits cannot extend a tile's
life or fail a rename.
- Upstream refusals other than 401/403/429 answer 502.
- The tile route's success path is tested end to end (200 with the image
layer stripped and the right headers, 204 when empty, an abandoned
response aborts upstream); the teardown race that made this file flaky
is gone (240 parallel runs, no failure); the QA-constant tautologies are
replaced by a check against the real provider registry; the boundary
group lists the modules the provider actually imports.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
From the IC8 review of #768 (P2s), each with a test that fails before:
- A tile read from disk keeps its real age in memory, and the trim rewrite
keeps the file's mtime, so nothing is served past the 24 h TTL.
- The disk cache is swept in the background at most every 15 min: expired
tiles go, then the oldest past 1 GiB. Coverage zooms the app never
requests (z6-10) are refused with a 400, and layer names are matched as
own keys only.
- The tests run against a temporary cache directory (a test seam) instead
of writing into and deleting from the developer's real .gev-cache.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The fixture gate always reported a configured key, so the KEY REQUIRED path
most installs see never ran in CI, nothing checked that the lazily imported
MapillaryJS viewer loads, and the FOLLOW step (which needs an open photo)
failed for anyone with a Google key. Fixture runs now:
- check the viewer is stood up in the panel ahead of the first photo;
- serve a rejected key and assert KEY REJECTED, no further tile requests on
a pan, and no stale message once the layer is off;
- open a second page whose server has no key and assert KEY REQUIRED;
- treat FOLLOW as a photo step.
Passes 16/16 locally against a dev server with Google 3D available.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Lower the Vegvesen default cap to 900, still above the ~850 working
cameras, so the per-pack defaults stay closer to the catalog default.
- Name the flat ground-elevation prior as a known limitation: the feed
is 2D, and mountain-pass cameras can sit below terrain where neither
the point-height prior nor the ground snap resolves.
- README: ~3,900 public cameras.
- Use one HLS figure (~135 working) in CHANGELOG and DATA_SOURCES.
- DATA_SOURCES: list the frame and HLS hosts alongside the catalog host.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Norway's ~850 working road cameras load from one keyless GeoJSON request
to the agency's OGC API view of its DATEX 3.1 CCTV table, so no DATEX
account is needed. Faulty cameras are dropped, every camera sits under a
"Norway" category, and the ~135 that publish HLS play as live video
through the existing in-memory relay with the still as fallback. Frames
and manifests are pinned to each camera's own path on the agency hosts.
CCTV_VEGVESEN_ENABLED=0 disables the pack, CCTV_VEGVESEN_MAX_SOURCES
caps it (nearest the largest cities first) and CCTV_VEGVESEN_VIDEO=0
keeps stills only. Attributed under NLOD 2.0.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Keeps the voice-core prompt rules and adds main's world-query and
vessels-vs-visuals rules; the tool catalog wraps the deixis-aware runner.
Also fixes two things the branch had before the merge:
- Live voice could not start: OpenAI rejects track_entity's top-level
anyOf. Model-facing tools now omit top-level combinators; the runner
and benchmark still require a query or a referent.
- The Contacts-centred analyst answer dropped the viewport coverage note.
Brings in 123 commits from main, including the v0.2.0 and v0.2.1 releases
(MCP server and tool catalog, server security hardening, build hygiene).
Conflicts:
- package.json: kept main's script order and added this PR's
qa:panel-resize and qa:street-level; exports keep both sides (main's
tools/view entries and this PR's street-level and Mapillary entries).
- src/tooling/viteBuild.test.mjs: kept this PR's Mapillary-token define
assertion and main's new wildcard-host allowedHosts assertions.
- CHANGELOG.md: main now has release sections; this PR's entries go under
[Unreleased].
Checks after the merge: doctor, format:check, check:boundaries,
layer-token:check (28 published, 1 new: street-level 0), npm test (5726
pass), build, the Windows job's focused tests (70 pass), qa:panel-resize,
and the keyless street-level gate. The new CSP allows Mapillary (https:
connect/img, blob workers). The keyed gate stops at coverage locally
because the dev .env Mapillary token is invalid (upstream 403), not because
of the merge.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
